| Age | Commit message (Collapse) | Author |
|---|
|
When called with a negative drive value, set_fdc() would stick to the
current fdc (which was assumed to reflect the current_drive's FDC). We
do not need this anymore as the last call place with a negative value
was just addressed. Let's make this function always set both current_fdc
and current_drive so that there's no more ambiguity. A few comments
stating this were added to a few non-obvious places.
Link: https://lore.kernel.org/r/20200410101904.14652-3-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
This macro equals -1 and is used as an alternative for current_drive when
calling reschedule_timeout(), which in turn needs to remap it. This only
adds obfuscation, let's simply use current_drive.
Link: https://lore.kernel.org/r/20200410101904.14652-2-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
In floppy_resume() we don't properly reinitialize all FDCs, instead
we reinitialize the current FDC once per available FDC because value
-1 is passed to user_reset_fdc(). Let's simply save the current drive
and properly reinitialize each FDC.
Link: https://lore.kernel.org/r/20200410101904.14652-1-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
There's no need to iterate on current_fdc in do_floppy_init() anymore,
in the first case it's only used as an array index to access fdc_state[],
so let's get rid of this confusing assignment. The second case is a bit
trickier because user_reset_fdc() needs to already know current_fdc when
called with drive==-1 due to this call chain:
user_reset_fdc()
lock_fdc()
set_fdc()
drive<0 ==> new_fdc = current_fdc
Note that current_drive is not used in this code part and may even not
match a unit belonging to current_fdc. Instead of passing -1 we can
simply pass the first drive of the FDC being initialized, which is even
cleaner as it will allow the function chain above to consistently assign
both variables.
Link: https://lore.kernel.org/r/20200410093023.14499-1-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
The locking in the driver is far from being obvious, with unlocking
automatically happening at end of operations scheduled by interrupt,
especially for the error paths where one does not necessarily expect
that such an interrupt may be triggered. Let's add a few comments
about what to expect at certain places to avoid misdetecting bugs
which are not.
Link: https://lore.kernel.org/r/20200331094054.24441-24-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
Both floppy_grab_irq_and_dma() and floppy_release_irq_and_dma() used to
iterate on the global variable while setting up or freeing resources.
Now that they exclusively rely on functions which take the fdc as an
argument, so let's not touch the global one anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-23-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-22-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
Now the drive is passed in argument so that the function does not
use current_drive anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-21-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
Now the fdc and drive are passed in argument so that the function does
not use current_fdc nor current_drive anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-20-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
Now the fdc and drive are passed in argument so that the function does
not use current_fdc nor current_drive anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-19-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-18-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
It's worth noting that there's still a single raw_cmd pointer
specific to the current fdc. It may make sense to have one per
fdc in the future. In addition, cont->done() still relies on the
current drive and current raw_cmd.
Link: https://lore.kernel.org/r/20200331094054.24441-17-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-16-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
It's worth noting that there's still a single reply_buffer[] which
will store the result for the current fdc. It may or may not make
sense to implement one buffer per fdc in the future.
Link: https://lore.kernel.org/r/20200331094054.24441-15-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-14-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-13-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-12-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
Now the fdc is passed in argument so that the function does not
use current_fdc anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-11-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
Now the fdc and drive are passed in argument so that the function does
not use current_fdc nor current_drive anymore.
Link: https://lore.kernel.org/r/20200331094054.24441-10-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
Now we can use FD_STATUS and FD_DATA instead of 4 or 5, let's do
this, and also use STATUS_DMA and STATUS_READY for the status bits.
Link: https://lore.kernel.org/r/20200331094054.24441-9-w@1wt.eu
Cc: x86@kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
Now by splitting the base address from the register index we can
use the symbolic register names instead of the hard-coded numeric
values.
Link: https://lore.kernel.org/r/20200331094054.24441-8-w@1wt.eu
Cc: "David S. Miller" <davem@davemloft.net>
[willy: fix printk warnings s/%lx/%x/g in sun_82077_fd_{inb,outb}()]
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
The sparc port used to be forced to rely on numeric register indexes
with their equivalent in comments. Now that they don't depend on the
IO port we can use their symbolic names.
Link: https://lore.kernel.org/r/20200331094054.24441-7-w@1wt.eu
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
Now we can use FD_STATUS and FD_DATA instead of 4 or 5, let's do
this, and also use STATUS_DMA and STATUS_READY for the status bits.
Link: https://lore.kernel.org/r/20200331094054.24441-6-w@1wt.eu
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
Now we can use FD_STATUS and FD_DATA instead of 4 or 5, let's do
this, and also use STATUS_DMA and STATUS_READY for the status bits.
Link: https://lore.kernel.org/r/20200331094054.24441-5-w@1wt.eu
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
Now we can use FD_STATUS and FD_DATA instead of 4 or 5, let's do
this, and also use STATUS_DMA and STATUS_READY for the status bits.
Link: https://lore.kernel.org/r/20200331094054.24441-4-w@1wt.eu
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
This controller provides extra status registers SRA and SRB as well
as a tape drive register (TDR) and a data rate select register (DSR),
which are referenced in the sparc port, so let's have their symbolic
definitions centralized.
Link: https://lore.kernel.org/r/20200331094054.24441-3-w@1wt.eu
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
Currently we have architecture-specific fd_inb() and fd_outb() functions
or macros, taking just a port which is in fact made of a base address and
a register. The base address is FDC-specific and derived from the local or
global "fdc" variable through the FD_IOPORT macro used in the base address
calculation.
This change splits this by explicitly passing the FDC's base address and
the register separately to fd_outb() and fd_inb(). It affects the
following archs:
- x86, alpha, mips, powerpc, parisc, arm, m68k:
simple remap of port -> base+reg
- sparc32: use of reg only, since the base address was already masked
out and the FDC controller is known from a static struct.
- sparc64: like x86 for PCI, like sparc32 for 82077
Some archs use inline functions and others macros. This was not
unified in order to minimize the number of changes to review. For the
same reason checkpatch still spews a few warnings about things that
were already there before.
The parisc still uses hard-coded register values and could be cleaned up
by taking the register definitions.
The sparc per-controller inb/outb functions could further be refined
to explicitly take an FDC register instead of a port in argument but it
was not needed yet and may be cleaned later.
Link: https://lore.kernel.org/r/20200331094054.24441-2-w@1wt.eu
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Ian Molton <spyro@f2s.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: x86@kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Denis Efremov <efremov@linux.com>
|
|
Improve code readability by defining the specification's constants that
the driver is using when decoding identification payloads.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Bart van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With reference to the NVMeOF Specification (page 44, Figure 38)
discovery log page entry provides address family field. We do set the
transport type field but the adrfam field is not set when using loop
transport and also it doesn't have support in the nvme-cli. So when
reading discovery log page with a loop transport it leads to confusing
output.
As per the spec for adrfam value 254 is reserved for Intra Host
Transport i.e. loopback), we add a required macro in the protocol
header file, set default port disc addr entry's adrfam to
NVMF_ADDR_FAMILY_MAX, and update nvmet_addr_family configfs array for
show/store attribute.
Without this patch, setting adrfam to (ipv4/ipv6/ib/fc/loop/" ") we get
following output for nvme discover command from nvme-cli which is
confusing.
trtype: loop
adrfam: ipv4
trtype: loop
adrfam: ipv6
trtype: loop
adrfam: infiniband
trtype: loop
adrfam: fibre-channel
trtype: loop # ${CFGFS_HOME}/nvmet/ports/1/addr_adrfam = loop
adrfam: pci # <----- pci for loop
trtype: loop # ${CFGFS_HOME}/nvmet/ports/1/addr_adrfam = " "
adrfam: pci # <----- pci for unrecognized
This patch fixes above output :-
trtype: loop
adrfam: ipv4
trtype: loop
adrfam: ipv6
trtype: loop
adrfam: infiniband
trtype: loop
adrfam: fibre-channel
trtype: loop # ${CFGFS_HOME}/nvmet/ports/1/addr_adrfam = loop
adrfam: loop # <----- loop for loop
trtype: loop # ${CFGFS_HOME}/config/nvmet/ports/adrfam = " "
adrfam: unrecognized # <----- unrecognized when invalid value
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The configfs attributes which are supposed to set when port is disable
such as addr[addrfam|portid|traddr|treq|trsvcid|inline_data_size|trtype]
has repetitive check and generic error message printing.
This patch creates centralize helper to check and print an error
message that also accepts caller as a parameter. This makes error
message easy to parse for the user, removes the duplicate code and
makes it available for futures such scenarios.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently nvmet_addr_treq_[store|show]() uses switch and if else
ladder for address transport requirements to string and reverse
mapping. With addtion of the generic nvmet_type_name_map structure
we can get rid of the switch and if else ladder with string
duplication.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that we have a generic type to name map for configfs, get rid of
the nvmet_ana_state_names structure and replace it with newly added
nvmet_type_name_map.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Right now nvmet_addr_adrfam_[store|show]() uses switch and if else
ladder for address family to string and reverse mapping which also
repeats the strings in show and store function.
With addition of generic nvmet_type_name_map structure we can now get rid
of the switch and if else ladder and string duplication.
Also, we add a newline in before found label in nvmet_addr_trtype_store()
which keeps goto label code consistent with
nvmet_allowed_hosts_drop_link(), nvmet_port_subsys_drop_link() and
nvmet_ana_group_ana_state_store().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch adds a new type to name mapping generic structure. It
replaces nvmet_transport_name with new generic mapping structure
nvmet_transport.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
nvme-multipath already uses the gendisk private data, not need to
also set up the request_queue queuedata and use it in one place only.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Today, nvme-tcp automatically schedules a send request
to a workqueue context, which is 1 more than we'd need
in case the socket buffer is wide open.
However, because we have async send activity (as a result
of r2t, or write_space callbacks), we need to synchronize
sends from possibly multiple contexts (ideally all running
on the same cpu though).
Thus, we only try to send directly from queue_rq in cases:
1. the send_list is empty
2. we can send it synchronously (i.e. not from the RX path)
3. we run on the same cpu as the queue->io_cpu to avoid
contention on the send operation.
Proposed-by: Mark Wunderlich <mark.wunderlich@intel.com>
Signed-off-by: Mark Wunderlich <mark.wunderlich@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When the user runs polled I/O, we shouldn't have to trigger
the workqueue to generate the receive work upon the .data_ready
upcall. This prevents a redundant context switch when the
application is already polling for completions.
Proposed-by: Mark Wunderlich <mark.wunderlich@intel.com>
Signed-off-by: Mark Wunderlich <mark.wunderlich@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
data_ready may be invoked from send context or from
softirq, so need bh locking for that.
Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since commit 147b27e4bd08 ("nvme-pci: allocate device queues storage
space at probe"), nvme_alloc_queue does not alloc the nvme queues
itself anymore.
If the write/poll_queues module parameters are changed at runtime to
values larger than the number of allocated queues in nvme_probe,
nvme_alloc_queue will access unallocated memory.
Add a new nr_allocated_queues member to struct nvme_dev to record how
many queues were alloctated in nvme_probe to avoid using more than the
allocated queues after a reset following a change to the
write/poll_queues module parameters.
Also add nr_write_queues and nr_poll_queues members to allow refreshing
the number of write and poll queues based on a change to the module
parameters when resetting the controller.
Fixes: 147b27e4bd08 ("nvme-pci: allocate device queues storage space at probe")
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
[hch: add nvme_max_io_queues, update the commit message]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The nvme driver does not have enough tags to wrap the queue, and blk-mq
will no longer call commit_rqs() when there are no new submissions to
notify.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The completion queue entry is not volatile once the phase is confirmed.
Remove the volatile keywords and check the phase using the appropriate
READ_ONCE() accessor, allowing the compiler to optimize the remaining
completion path.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If a passthrough command causes the namespace inventory or capabilities
to change, flush the scan work that handles these changes so the driver
synchronizes with the user command's effects before returning the result
to user space.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use a common label for putting the nshead if needed and only convert
nvme status codes for the one case where it actually is needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When CONFIG_ARCH_NO_SG_CHAIN is set, op->sgl[0] cannot be dereferenced,
as gcc-10 now points out:
drivers/nvme/host/fc.c: In function 'nvme_fc_init_request':
drivers/nvme/host/fc.c:1774:29: warning: array subscript 0 is outside the bounds of an interior zero-length array 'struct scatterlist[0]' [-Wzero-length-bounds]
1774 | op->op.fcp_req.first_sgl = &op->sgl[0];
| ^~~~~~~~~~~
drivers/nvme/host/fc.c:98:21: note: while referencing 'sgl'
98 | struct scatterlist sgl[NVME_INLINE_SG_CNT];
| ^~~
I don't know if this is a legitimate warning or a false-positive.
If this is just a false alarm, the warning is easily suppressed
by interpreting the array as a pointer.
Fixes: b1ae1a238900 ("nvme-fc: Avoid preallocating big SGL for data")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add support for detecting capacity changes on nvmet blockdev and file
backed namespaces. This allows for emulating and testing online resizing
of nvme devices and filesystems on top.
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
[chaitanya: Fix comments posted on V1]
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
[hch: reuse code a bit more]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The stream parameters indicating optimal io settings were just getting
overwritten later. Rearrange the settings so the streams parameters can
be preserved if provided.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The stream parameters are based on the currently formatted logical block
size. Recheck these parameters on namespace revalidation so the
registered constraints will be accurate.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the quirked chunk_sectors setting to the same location as noiob so
one place registers this setting. And since the noiob value is only used
locally, remove the member from struct nvme_ns.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If the namespace identifiers have changed, skip updating the disk
information, as that will register parameters from a mismatched
namespace.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The queues' backing device info capabilities don't change with each
namespace revalidation. Set it only when each path's request_queue
is initially added to a multipath queue.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
