summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2020-12-09ath11k: support TXOP duration based RTS thresholdPradeep Kumar Chitrapu
HE operation IE in beacons is constructed based on userspace params, which firmware might not be aware of. This causes firmware not to configure TXOP duration based RTS threshold which could cause mismatch in behaviour with respect to what is being advertised in beacons. This patch sends HE operation IE fetched from beacon to firmware using WMI interface for configuration. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201020183111.25458-4-pradeepc@codeaurora.org
2020-12-09ath11k: fix incorrect wmi param for configuring HE operationPradeep Kumar Chitrapu
WMI_VDEV_PARAM_TX_OFDMA_CPLEN has been added with incorrect enum value. Fix the enum to represent WMI param for configuring HE operation field. This is applicable to firmwares under https://github.com/kvalo/ath11k-firmware/tree/master/IPQ8074/hw2.0 https://github.com/kvalo/ath11k-firmware/tree/master/IPQ6018/hw1.0 https://github.com/kvalo/ath11k-firmware/tree/master/QCN9074/hw1.0 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201020183111.25458-3-pradeepc@codeaurora.org
2020-12-09ath11k: unlock on error path in ath11k_mac_op_add_interface()Dan Carpenter
These error paths need to drop the &ar->conf_mutex before returning. Fixes: 690ace20ff79 ("ath11k: peer delete synchronization with firmware") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/X85sVGVP/0XvlrEJ@mwanda
2020-12-09wcn36xx: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by replacing a /* fall through */ comment with the new pseudo-keyword macro fallthrough; instead of letting the code fall through to the next case. Notice that Clang doesn't recognize /* fall through */ comments as implicit fall-through markings. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/f932c887e013767cbdabfdddd671086e8ae63193.1605896060.git.gustavoars@kernel.org
2020-12-09carl9170: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/04257418814755f081fa0ac14a61b01328cdc4ed.1605896059.git.gustavoars@kernel.org
2020-12-09ath5k: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/e127232621c4de340509047a11d98093958303c5.1605896059.git.gustavoars@kernel.org
2020-12-09ath11k: fix rmmod failure if qmi sequence failsAnilkumar Kolli
QMI sequence fails if caldata file is not available. It is observed that 'rmmod ath11k' fails if qmi message fails. With this patch rmmod/insmod is working. Logs: Direct firmware load for IPQ8074/caldata.bin failed with error -2 Falling back to user helper qmi failed to load CAL: IPQ8074/caldata.bin qmi failed to load board data file:-11 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01699-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1606916215-24643-1-git-send-email-akolli@codeaurora.org
2020-12-08carl9170: remove trailing semicolon in macro definitionTom Rix
The macro use will already have a semicolon. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201127175531.2754461-1-trix@redhat.com
2020-12-08ath11k: pci: add MODULE_FIRMWARE macrosDevin Bayer
I am trying to get the ath11k driver to work with VyOS and during the build it tries to discover the firmware blobs which drivers require. This doesn't work with ath11k because it doesn't use the MODULE_FIRMWARE macro. This patch fixes that. Signed-off-by: Devin Bayer <dev@doubly.so> [kvalo@codeaurora.org: cleanup commit log, move to pci.c] Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201202182705.dhkml4nb4rf2vwav@orac
2020-12-07ath9k: remove trailing semicolon in macro definitionTom Rix
The macro use will already have a semicolon. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201127175336.2752730-1-trix@redhat.com
2020-12-07ath11k: Ignore resetting peer auth flag in peer assoc cmdSeevalamuthu Mariappan
Incase of hardware encryption, WMI_PEER_AUTH flag will be set by firmware during install key. Since install key wont be done for software encryption mode, firmware will not set this flag. Due to this, seeing traffic failure in software encryption. Hence, avoid resetting peer auth flag if hardware encryption disabled. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01421-QCAHKSWPL_SILICONZ-1 Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1606369414-25211-1-git-send-email-seevalam@codeaurora.org
2020-12-07ath11k: add 64bit check before reading msi high addrAnilkumar Kolli
In QCN9074 ath11k boot, firmware crash is observed in 64-bit builds and is due to wrong 64 bit MSI address size. This patch fixes the firmware crash. Read msi high addr if 64-bit addresses allowed on MSI. Tested-On: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r1-00026-QCAHKSWPL_SILICONZ-2 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1606199334-18206-1-git-send-email-akolli@codeaurora.org
2020-12-07ath10k: fix a check patch warning returnNonBoolInBooleanFunction of sdio.cWen Gong
cppcheck possible warnings: (new ones prefixed by >>, may not real problems) drivers/net/wireless/ath/ath10k/sdio.c:2234:2: warning: Non-boolean value returned from function returning bool [returnNonBoolInBooleanFunction] return param & HI_OPTION_SDIO_CRASH_DUMP_ENHANCEMENT_FW; Reported-by: kernel test robot <rong.a.chen@intel.com> Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1606103240-9868-1-git-send-email-wgong@codeaurora.org
2020-12-06Merge branch 'mlxsw-Misc-updates'David S. Miller
Ido Schimmel says: ==================== mlxsw: Misc updates This patchset contains miscellaneous patches we gathered in our queue. Some of them are dependencies of larger patchsets that I will submit later this cycle. Patches #1-#3 perform small non-functional changes in mlxsw. Patch #4 adds more extended ack messages in mlxsw. Patch #5 adds devlink parameters documentation for mlxsw. To be extended with more parameters this cycle. Patches #6-#7 perform small changes in forwarding selftests infrastructure. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-06mlxsw: spectrum_router: Reduce mlxsw_sp_ipip_fib_entry_op_gre4()Jiri Pirko
Turned out that mlxsw_sp_ipip_fib_entry_op_gre4() does not need to figure out the IP address and virtual router id. Those are exactly the same as in the fib_entry it is called for. So just use that and reduce mlxsw_sp_ipip_fib_entry_op_gre4() function to only call mlxsw_sp_ipip_fib_entry_op_gre4_rtdp() make the ipip decap op code similar to nve. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-06mlxsw: spectrum: Bump minimum FW version to xx.2008.2018Petr Machata
The indicated version fixes an issue whereby the MOMTE register would by default enable mirroring of ECN-marked traffic from all traffic classes, once the ECN mirroring was configured. This fix is necessary for offload of RED "ecn_mark" qevent. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-06mlxsw: core_acl: Use an array instead of a struct with a zero-length arrayIdo Schimmel
Suppresses the following coccinelle warning: drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_keys.c:139:3-7: WARNING use flexible-array member instead Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-06mlxsw: spectrum_mr: Use flexible-array member instead of zero-length arrayIdo Schimmel
Suppresses the following coccinelle warning: drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c:18:15-19: WARNING use flexible-array member instead Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-06mlxsw: core: Trace EMAD eventsIdo Schimmel
Currently, mlxsw triggers the 'devlink:devlink_hwmsg' tracepoint whenever a request is sent to the device and whenever a response is received from it. However, the tracepoint is not triggered when an event (e.g., port up / down) is received from the device. Also trace EMAD events in order to log a more complete picture of all the exchanged hardware messages. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-06selftests: mlxsw: Test RIF's reference count when joining a LAGIdo Schimmel
Test that the reference count of a router interface (RIF) configured for a LAG is incremented / decremented when ports join / leave the LAG. Use the offload indication on routes configured on the RIF to understand if it was created / destroyed. The test fails without the previous patch. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-06mlxsw: spectrum: Apply RIF configuration when joining a LAGIdo Schimmel
In case a router interface (RIF) is configured for a LAG, make sure its configuration is applied on the new LAG member. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-05Merge branch 'r8169-improve-rtl_rx-and-NUM_RX_DESC-handling'David S. Miller
Heiner Kallweit says: ==================== r8169: improve rtl_rx and NUM_RX_DESC handling This series improves rtl_rx() and the handling of NUM_RX_DESC. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-05r8169: make NUM_RX_DESC a signed intHeiner Kallweit
After recent changes there's no need any longer to define NUM_RX_DESC as an unsigned value. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-05r8169: improve rtl_rxHeiner Kallweit
There's no need to check min(budget, NUM_RX_DESC). At first budget (NAPI_POLL_WEIGHT = 64) is less then NUM_RX_DESC (256). And more important: Even in case of budget > NUM_RX_DESC we could safely continue processing descriptors as long as they are owned by the CPU. In addition replace rx_left with a normal counter variable, this allows to simplify the code. Last but not least there's no need any longer to pass the budget as an u32. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-05net: fix spelling mistake "wil" -> "will" in KconfigColin Ian King
There is a spelling mistake in the Kconfig help text. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201204194549.1153063-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-05Merge tag 'batadv-next-pullrequest-20201204' of ↵Jakub Kicinski
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - update include for min/max helpers, by Sven Eckelmann - add infrastructure and netlink functions for routing algo selection, by Sven Eckelmann (2 patches) - drop deprecated debugfs and sysfs support and obsoleted functionality, by Sven Eckelmann (3 patches) - drop unused include in fragmentation.c, by Simon Wunderlich * tag 'batadv-next-pullrequest-20201204' of git://git.open-mesh.org/linux-merge: batman-adv: Drop unused soft-interface.h include in fragmentation.c batman-adv: Drop legacy code for auto deleting mesh interfaces batman-adv: Drop deprecated debugfs support batman-adv: Drop deprecated sysfs support batman-adv: Allow selection of routing algorithm over rtnetlink batman-adv: Prepare infrastructure for newlink settings batman-adv: Add new include for min/max helpers batman-adv: Start new development cycle ==================== Link: https://lore.kernel.org/r/20201204154631.21063-1-sw@simonwunderlich.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-05enetc: Fix unused var build warning for CONFIG_OFArnd Bergmann
When CONFIG_OF is disabled, there is a harmless warning about an unused variable: enetc_pf.c: In function 'enetc_phylink_create': enetc_pf.c:981:17: error: unused variable 'dev' [-Werror=unused-variable] Slightly rearrange the code to pass around the of_node as a function argument, which avoids the problem without hurting readability. Fixes: 71b77a7a27a3 ("enetc: Migrate to PHYLINK and PCS_LYNX") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20201204120800.17193-1-claudiu.manoil@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-05ptp: Add clock driver for the OpenCompute TimeCard.Jonathan Lemon
The OpenCompute time card is an atomic clock along with a GPS receiver that provides a Grandmaster clock source for a PTP enabled network. More information is available at http://www.timingcard.com/ Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20201204035128.2219252-2-jonathan.lemon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04net/nfc/nci: Support NCI 2.x initial sequenceBongsu Jeon
implement the NCI 2.x initial sequence to support NCI 2.x NFCC. Since NCI 2.0, CORE_RESET and CORE_INIT sequence have been changed. If NFCEE supports NCI 2.x, then NCI 2.x initial sequence will work. In NCI 1.0, Initial sequence and payloads are as below: (DH) (NFCC) | -- CORE_RESET_CMD --> | | <-- CORE_RESET_RSP -- | | -- CORE_INIT_CMD --> | | <-- CORE_INIT_RSP -- | CORE_RESET_RSP payloads are Status, NCI version, Configuration Status. CORE_INIT_CMD payloads are empty. CORE_INIT_RSP payloads are Status, NFCC Features, Number of Supported RF Interfaces, Supported RF Interface, Max Logical Connections, Max Routing table Size, Max Control Packet Payload Size, Max Size for Large Parameters, Manufacturer ID, Manufacturer Specific Information. In NCI 2.0, Initial Sequence and Parameters are as below: (DH) (NFCC) | -- CORE_RESET_CMD --> | | <-- CORE_RESET_RSP -- | | <-- CORE_RESET_NTF -- | | -- CORE_INIT_CMD --> | | <-- CORE_INIT_RSP -- | CORE_RESET_RSP payloads are Status. CORE_RESET_NTF payloads are Reset Trigger, Configuration Status, NCI Version, Manufacturer ID, Manufacturer Specific Information Length, Manufacturer Specific Information. CORE_INIT_CMD payloads are Feature1, Feature2. CORE_INIT_RSP payloads are Status, NFCC Features, Max Logical Connections, Max Routing Table Size, Max Control Packet Payload Size, Max Data Packet Payload Size of the Static HCI Connection, Number of Credits of the Static HCI Connection, Max NFC-V RF Frame Size, Number of Supported RF Interfaces, Supported RF Interfaces. Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com> Link: https://lore.kernel.org/r/20201202223147.3472-1-bongsu.jeon@samsung.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04selftests: forwarding: Add MPLS L2VPN testGuillaume Nault
Connect hosts H1 and H2 using two intermediate encapsulation routers (LER1 and LER2). These routers encapsulate traffic from the hosts, including the original Ethernet header, into MPLS. Use ping to test reachability between H1 and H2. Signed-off-by: Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/625f5c1aafa3a8085f8d3e082d680a82e16ffbaa.1606918980.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04net: bna: remove trailing semicolon in macro definitionTom Rix
The macro use will already have a semicolon. Clean up escaped newlines. Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20201202163622.3733506-1-trix@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04tipc: support 128bit node identity for peer removingHoang Le
We add the support to remove a specific node down with 128bit node identifier, as an alternative to legacy 32-bit node address. example: $tipc peer remove identiy <1001002|16777777> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Link: https://lore.kernel.org/r/20201203035045.4564-1-hoang.h.le@dektech.com.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04nfp: Replace zero-length array with flexible-array memberSimon Horman
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use "flexible array members"[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arrays Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Louis Peens <louis.peens@netronome.com> Link: https://lore.kernel.org/r/20201204125601.24876-1-simon.horman@netronome.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04nfc: s3fwrn5: skip the NFC bootloader modeBongsu Jeon
If there isn't a proper NFC firmware image, Bootloader mode will be skipped. Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201203225257.2446-1-bongsu.jeon@samsung.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04Merge branch 'perf-optimizations-for-tcp-recv-zerocopy'Jakub Kicinski
Arjun Roy says: ==================== Perf. optimizations for TCP Recv. Zerocopy This patchset contains several optimizations for TCP Recv. Zerocopy. Summarized: 1. It is possible that a read payload is not exactly page aligned - that there may exist "straggler" bytes that we cannot map into the caller's address space cleanly. For this, we allow the caller to provide as argument a "hybrid copy buffer", turning getsockopt(TCP_ZEROCOPY_RECEIVE) into a "hybrid" operation that allows the caller to avoid a subsequent recvmsg() call to read the stragglers. 2. Similarly, for "small" read payloads that are either below the size of a page, or small enough that remapping pages is not a performance win - we allow the user to short-circuit the remapping operations entirely and simply copy into the buffer provided. Some of the patches in the middle of this set are refactors to support this "short-circuiting" optimization. 3. We allow the user to provide a hint that performing a page zap operation (and the accompanying TLB shootdown) may not be necessary, for the provided region that the kernel will attempt to map pages into. This allows us to avoid this expensive operation while holding the socket lock, which provides a significant performance advantage. With all of these changes combined, "medium" sized receive traffic (multiple tens to few hundreds of KB) see significant efficiency gains when using TCP receive zerocopy instead of regular recvmsg(). For example, with RPC-style traffic with 32KB messages, there is a roughly 15% efficiency improvement when using zerocopy. Without these changes, there is a roughly 60-70% efficiency reduction with such messages when employing zerocopy. ==================== Link: https://lore.kernel.org/r/20201202225349.935284-1-arjunroy.kdev@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04net-zerocopy: Defer vm zap unless actually needed.Arjun Roy
Zapping pages is required only if we are calling vm_insert_page into a region where pages had previously been mapped. Receive zerocopy allows reusing such regions, and hitherto called zap_page_range() before calling vm_insert_page() in that range. zap_page_range() can also be triggered from userspace with madvise(MADV_DONTNEED). If userspace is configured to call this before reusing a segment, or if there was nothing mapped at this virtual address to begin with, we can avoid calling zap_page_range() under the socket lock. That said, if userspace does not do that, then we are still responsible for calling zap_page_range(). This patch adds a flag that the user can use to hint to the kernel that a zap is not required. If the flag is not set, or if an older user application does not have a flags field at all, then the kernel calls zap_page_range as before. Also, if the flag is set but a zap is still required, the kernel performs that zap as necessary. Thus incorrectly indicating that a zap can be avoided does not change the correctness of operation. It also increases the batchsize for vm_insert_pages and prefetches the page struct for the batch since we're about to bump the refcount. An alternative mechanism could be to not have a flag, assume by default a zap is not needed, and fall back to zapping if needed. However, this would harm performance for older applications for which a zap is necessary, and thus we implement it with an explicit flag so newer applications can opt in. When using RPC-style traffic with medium sized (tens of KB) RPCs, this change yields an efficency improvement of about 30% for QPS/CPU usage. Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04net-zerocopy: Set zerocopy hint when data is copiedArjun Roy
Set zerocopy hint, event when falling back to copy, so that the pending data can be efficiently received using zerocopy when possible. Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04net-zerocopy: Introduce short-circuit small reads.Arjun Roy
Sometimes, we may call tcp receive zerocopy when inq is 0, or inq < PAGE_SIZE, or inq is generally small enough that it is cheaper to copy rather than remap pages. In these cases, we may want to either return early (inq=0) or attempt to use the provided copy buffer to simply copy the received data. This allows us to save both system call overhead and the latency of acquiring mmap_sem in read mode for cases where it would be useless to do so. This patchset enables this behaviour by: 1. Returning quickly if inq is 0. 2. Attempting to perform a regular copy if a hybrid copybuffer is provided and it is large enough to absorb all available bytes. 3. Return quickly if no such buffer was provided and there are less than PAGE_SIZE bytes available. For small RPC ping-pong workloads, normally we would have 1 getsockopt(), 1 recvmsg() and 1 sendmsg() call per RPC. With this change, we remove the recvmsg() call entirely, reducing the syscall overhead by about 33%. In testing with small (hundreds of bytes) RPC traffic, this yields a syscall reduction of about 33% and an efficiency gain of about 3-5% when defined as QPS/CPU Util. Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04net-zerocopy: Fast return if inq < PAGE_SIZEArjun Roy
Sometimes, we may call tcp receive zerocopy when inq is 0, or inq < PAGE_SIZE, in which case we cannot remap pages. In this case, simply return the appropriate hint for regular copying without taking mmap_sem. Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04net-zerocopy: Refactor frag-is-remappable test.Arjun Roy
Refactor frag-is-remappable test for tcp receive zerocopy. This is part of a patch set that introduces short-circuited hybrid copies for small receive operations, which results in roughly 33% fewer syscalls for small RPC scenarios. Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04net-zerocopy: Refactor skb frag fast-forward op.Arjun Roy
Refactor skb frag fast-forwarding for tcp receive zerocopy. This is part of a patch set that introduces short-circuited hybrid copies for small receive operations, which results in roughly 33% fewer syscalls for small RPC scenarios. skb_advance_to_frag(), given a skb and an offset into the skb, iterates from the first frag for the skb until we're at the frag specified by the offset. Assuming the offset provided refers to how many bytes in the skb are already read, the returned frag points to the next frag we may read from, while offset_frag is set to the number of bytes from this frag that we have already read. If frag is not null and offset_frag is equal to 0, then we may be able to map this frag's page into the process address space with vm_insert_page(). However, if offset_frag is not equal to 0, then we cannot do so. Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04net-tcp: Introduce tcp_recvmsg_locked().Arjun Roy
Refactor tcp_recvmsg() by splitting it into locked and unlocked portions. Callers already holding the socket lock and not using ERRQUEUE/cmsg/busy polling can simply call tcp_recvmsg_locked(). This is in preparation for a short-circuit copy performed by TCP receive zerocopy for small (< PAGE_SIZE, or otherwise requested by the user) reads. Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04net-zerocopy: Copy straggler unaligned data for TCP Rx. zerocopy.Arjun Roy
When TCP receive zerocopy does not successfully map the entire requested space, it outputs a 'hint' that the caller should recvmsg(). Augment zerocopy to accept a user buffer that it tries to copy this hint into - if it is possible to copy the entire hint, it will do so. This elides a recvmsg() call for received traffic that isn't exactly page-aligned in size. This was tested with RPC-style traffic of arbitrary sizes. Normally, each received message required at least one getsockopt() call, and one recvmsg() call for the remaining unaligned data. With this change, almost all of the recvmsg() calls are eliminated, leading to a savings of about 25%-50% in number of system calls for RPC-style workloads. Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04Merge branch 'seg6-add-support-for-srv6-end-dt4-dt6-behavior'Jakub Kicinski
Andrea Mayer says: ==================== seg6: add support for SRv6 End.DT4/DT6 behavior This patchset provides support for the SRv6 End.DT4 and End.DT6 (VRF mode) behaviors. The SRv6 End.DT4 behavior is used to implement multi-tenant IPv4 L3 VPNs. It decapsulates the received packets and performs IPv4 routing lookup in the routing table of the tenant. The SRv6 End.DT4 Linux implementation leverages a VRF device in order to force the routing lookup into the associated routing table. The SRv6 End.DT4 behavior is defined in the SRv6 Network Programming [1]. The Linux kernel already offers an implementation of the SRv6 End.DT6 behavior which allows us to set up IPv6 L3 VPNs over SRv6 networks. This new implementation of DT6 is based on the same VRF infrastructure already exploited for implementing the SRv6 End.DT4 behavior. The aim of the new SRv6 End.DT6 in VRF mode consists in simplifying the construction of IPv6 L3 VPN services in the multi-tenant environment. Currently, the two SRv6 End.DT6 implementations (legacy and VRF mode) coexist seamlessly and can be chosen according to the context and the user preferences. - Patch 1 is needed to solve a pre-existing issue with tunneled packets when a sniffer is attached; - Patch 2 improves the management of the seg6local attributes used by the SRv6 behaviors; - Patch 3 adds support for optional attributes in SRv6 behaviors; - Patch 4 introduces two callbacks used for customizing the creation/destruction of a SRv6 behavior; - Patch 5 is the core patch that adds support for the SRv6 End.DT4 behavior; - Patch 6 introduces the VRF support for SRv6 End.DT6 behavior; - Patch 7 adds the selftest for SRv6 End.DT4 behavior; - Patch 8 adds the selftest for SRv6 End.DT6 (VRF mode) behavior. Regarding iproute2, the support for the new "vrftable" attribute, required by both SRv6 End.DT4 and End.DT6 (VRF mode) behaviors, is provided in a different patchset that will follow shortly. I would like to thank David Ahern for his support during the development of this patchset. [1] https://tools.ietf.org/html/draft-ietf-spring-srv6-network-programming ==================== Link: https://lore.kernel.org/r/20201202130517.4967-1-andrea.mayer@uniroma2.it Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04selftests: add selftest for the SRv6 End.DT6 (VRF) behaviorAndrea Mayer
this selftest is designed for evaluating the new SRv6 End.DT6 (VRF) behavior used, in this example, for implementing IPv6 L3 VPN use cases. Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by: Paolo Lungaroni <paolo.lungaroni@cnit.it> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04selftests: add selftest for the SRv6 End.DT4 behaviorAndrea Mayer
this selftest is designed for evaluating the new SRv6 End.DT4 behavior used, in this example, for implementing IPv4 L3 VPN use cases. Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04seg6: add VRF support for SRv6 End.DT6 behaviorAndrea Mayer
SRv6 End.DT6 is defined in the SRv6 Network Programming [1]. The Linux kernel already offers an implementation of the SRv6 End.DT6 behavior which permits IPv6 L3 VPNs over SRv6 networks. This implementation is not particularly suitable in contexts where we need to deploy IPv6 L3 VPNs among different tenants which share the same network address schemes. The underlying problem lies in the fact that the current version of DT6 (called legacy DT6 from now on) needs a complex configuration to be applied on routers which requires ad-hoc routes and routing policy rules to ensure the correct isolation of tenants. Consequently, a new implementation of DT6 has been introduced with the aim of simplifying the construction of IPv6 L3 VPN services in the multi-tenant environment using SRv6 networks. To accomplish this task, we reused the same VRF infrastructure and SRv6 core components already exploited for implementing the SRv6 End.DT4 behavior. Currently the two End.DT6 implementations coexist seamlessly and can be used depending on the context and the user preferences. So, in order to support both versions of DT6 a new attribute (vrftable) has been introduced which allows us to differentiate the implementation of the behavior to be used. A SRv6 End.DT6 legacy behavior is still instantiated using a command like the following one: $ ip -6 route add 2001:db8::1 encap seg6local action End.DT6 table 100 dev eth0 While to instantiate the SRv6 End.DT6 in VRF mode, the command is still pretty straight forward: $ ip -6 route add 2001:db8::1 encap seg6local action End.DT6 vrftable 100 dev eth0. Obviously as in the case of SRv6 End.DT4, the VRF strict_mode parameter must be set (net.vrf.strict_mode=1) and the VRF associated with table 100 must exist. Please note that the instances of SRv6 End.DT6 legacy and End.DT6 VRF mode can coexist in the same system/configuration without problems. [1] https://tools.ietf.org/html/draft-ietf-spring-srv6-network-programming Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04seg6: add support for the SRv6 End.DT4 behaviorAndrea Mayer
SRv6 End.DT4 is defined in the SRv6 Network Programming [1]. The SRv6 End.DT4 is used to implement IPv4 L3VPN use-cases in multi-tenants environments. It decapsulates the received packets and it performs IPv4 routing lookup in the routing table of the tenant. The SRv6 End.DT4 Linux implementation leverages a VRF device in order to force the routing lookup into the associated routing table. To make the End.DT4 work properly, it must be guaranteed that the routing table used for routing lookup operations is bound to one and only one VRF during the tunnel creation. Such constraint has to be enforced by enabling the VRF strict_mode sysctl parameter, i.e: $ sysctl -wq net.vrf.strict_mode=1. At JANOG44, LINE corporation presented their multi-tenant DC architecture using SRv6 [2]. In the slides, they reported that the Linux kernel is missing the support of SRv6 End.DT4 behavior. The SRv6 End.DT4 behavior can be instantiated using a command similar to the following: $ ip route add 2001:db8::1 encap seg6local action End.DT4 vrftable 100 dev eth0 We introduce the "vrftable" extension in iproute2 in a following patch. [1] https://tools.ietf.org/html/draft-ietf-spring-srv6-network-programming [2] https://speakerdeck.com/line_developers/line-data-center-networking-with-srv6 Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04seg6: add callbacks for customizing the creation/destruction of a behaviorAndrea Mayer
We introduce two callbacks used for customizing the creation/destruction of a SRv6 behavior. Such callbacks are defined in the new struct seg6_local_lwtunnel_ops and hereafter we provide a brief description of them: - build_state(...): used for calling the custom constructor of the behavior during its initialization phase and after all the attributes have been parsed successfully; - destroy_state(...): used for calling the custom destructor of the behavior before it is completely destroyed. Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04seg6: add support for optional attributes in SRv6 behaviorsAndrea Mayer
Before this patch, each SRv6 behavior specifies a set of required attributes that must be provided by the userspace application when such behavior is going to be instantiated. If at least one of the required attributes is not provided, the creation of the behavior fails. The SRv6 behavior framework lacks a way to manage optional attributes. By definition, an optional attribute for a SRv6 behavior consists of an attribute which may or may not be provided by the userspace. Therefore, if an optional attribute is missing (and thus not supplied by the user) the creation of the behavior goes ahead without any issue. This patch explicitly differentiates the required attributes from the optional attributes. In particular, each behavior can declare a set of required attributes and a set of optional ones. The semantic of the required attributes remains *totally* unaffected by this patch. The introduction of the optional attributes does NOT impact on the backward compatibility of the existing SRv6 behaviors. It is essential to note that if an (optional or required) attribute is supplied to a SRv6 behavior which does not expect it, the behavior simply discards such attribute without generating any error or warning. This operating mode remained unchanged both before and after the introduction of the optional attributes extension. The optional attributes are one of the key components used to implement the SRv6 End.DT6 behavior based on the Virtual Routing and Forwarding (VRF) framework. The optional attributes make possible the coexistence of the already existing SRv6 End.DT6 implementation with the new SRv6 End.DT6 VRF-based implementation without breaking any backward compatibility. Further details on the SRv6 End.DT6 behavior (VRF mode) are reported in subsequent patches. From the userspace point of view, the support for optional attributes DO NOT require any changes to the userspace applications, i.e: iproute2 unless new attributes (required or optional) are needed. Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-16 14:20:27 +0000