summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2020-05-14MAINTAINERS: Mark networking drivers as Maintained.David S. Miller
Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14ipmr: Add lockdep expression to ipmr_for_each_table macroAmol Grover
During the initialization process, ipmr_new_table() is called to create new tables which in turn calls ipmr_get_table() which traverses net->ipv4.mr_tables without holding the writer lock. However, this is safe to do so as no tables exist at this time. Hence add a suitable lockdep expression to silence the following false-positive warning: ============================= WARNING: suspicious RCU usage 5.7.0-rc3-next-20200428-syzkaller #0 Not tainted ----------------------------- net/ipv4/ipmr.c:136 RCU-list traversed in non-reader section!! ipmr_get_table+0x130/0x160 net/ipv4/ipmr.c:136 ipmr_new_table net/ipv4/ipmr.c:403 [inline] ipmr_rules_init net/ipv4/ipmr.c:248 [inline] ipmr_net_init+0x133/0x430 net/ipv4/ipmr.c:3089 Fixes: f0ad0860d01e ("ipv4: ipmr: support multiple tables") Reported-by: syzbot+1519f497f2f9f08183c6@syzkaller.appspotmail.com Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Amol Grover <frextrite@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14ipmr: Fix RCU list debugging warningAmol Grover
ipmr_for_each_table() macro uses list_for_each_entry_rcu() for traversing outside of an RCU read side critical section but under the protection of rtnl_mutex. Hence, add the corresponding lockdep expression to silence the following false-positive warning at boot: [ 4.319347] ============================= [ 4.319349] WARNING: suspicious RCU usage [ 4.319351] 5.5.4-stable #17 Tainted: G E [ 4.319352] ----------------------------- [ 4.319354] net/ipv4/ipmr.c:1757 RCU-list traversed in non-reader section!! Fixes: f0ad0860d01e ("ipv4: ipmr: support multiple tables") Signed-off-by: Amol Grover <frextrite@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14drivers: net: hamradio: Fix suspicious RCU usage warning in bpqether.cMadhuparna Bhowmik
This patch fixes the following warning: ============================= WARNING: suspicious RCU usage 5.7.0-rc5-next-20200514-syzkaller #0 Not tainted ----------------------------- drivers/net/hamradio/bpqether.c:149 RCU-list traversed in non-reader section!! Since rtnl lock is held, pass this cond in list_for_each_entry_rcu(). Reported-by: syzbot+bb82cafc737c002d11ca@syzkaller.appspotmail.com Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14net: phy: broadcom: fix BCM54XX_SHD_SCR3_TRDDAPD value for BCM54810Kevin Lo
Set the correct bit when checking for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54810 PHY. Fixes: 0ececcfc9267 ("net: phy: broadcom: Allow BCM54810 to use bcm54xx_adjust_rxrefclk()") Signed-off-by: Kevin Lo <kevlo@kevlo.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14tcp: fix error recovery in tcp_zerocopy_receive()Eric Dumazet
If user provides wrong virtual address in TCP_ZEROCOPY_RECEIVE operation we want to return -EINVAL error. But depending on zc->recv_skip_hint content, we might return -EIO error if the socket has SOCK_DONE set. Make sure to return -EINVAL in this case. BUG: KMSAN: uninit-value in tcp_zerocopy_receive net/ipv4/tcp.c:1833 [inline] BUG: KMSAN: uninit-value in do_tcp_getsockopt+0x4494/0x6320 net/ipv4/tcp.c:3685 CPU: 1 PID: 625 Comm: syz-executor.0 Not tainted 5.7.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 tcp_zerocopy_receive net/ipv4/tcp.c:1833 [inline] do_tcp_getsockopt+0x4494/0x6320 net/ipv4/tcp.c:3685 tcp_getsockopt+0xf8/0x1f0 net/ipv4/tcp.c:3728 sock_common_getsockopt+0x13f/0x180 net/core/sock.c:3131 __sys_getsockopt+0x533/0x7b0 net/socket.c:2177 __do_sys_getsockopt net/socket.c:2192 [inline] __se_sys_getsockopt+0xe1/0x100 net/socket.c:2189 __x64_sys_getsockopt+0x62/0x80 net/socket.c:2189 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:297 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45c829 Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f1deeb72c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000037 RAX: ffffffffffffffda RBX: 00000000004e01e0 RCX: 000000000045c829 RDX: 0000000000000023 RSI: 0000000000000006 RDI: 0000000000000009 RBP: 000000000078bf00 R08: 0000000020000200 R09: 0000000000000000 R10: 00000000200001c0 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000001d8 R14: 00000000004d3038 R15: 00007f1deeb736d4 Local variable ----zc@do_tcp_getsockopt created at: do_tcp_getsockopt+0x1a74/0x6320 net/ipv4/tcp.c:3670 do_tcp_getsockopt+0x1a74/0x6320 net/ipv4/tcp.c:3670 Fixes: 05255b823a61 ("tcp: add TCP_ZEROCOPY_RECEIVE support for zerocopy receive") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14Merge tag 'mmc-v5.7-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Fix a couple of quite severe issues for the CQE request path MMC host: - alcor: Fix a resource leak in the error path for ->probe() - sdhci-acpi: Fix the DMA support for the AMD eMMC v5.0 variant - sdhci-pci-gli: Fix system resume support for GL975x - sdhci-pci-gli: Fix reboot error for GL9750" * tag 'mmc-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-acpi: Add SDHCI_QUIRK2_BROKEN_64_BIT_DMA for AMDI0040 mmc: block: Fix request completion in the CQE timeout path mmc: core: Fix recursive locking issue in CQE recovery path mmc: core: Check request type before completing the request mmc: sdhci-pci-gli: Fix can not access GL9750 after reboot from Windows 10 mmc: alcor: Fix a resource leak in the error path for ->probe() mmc: sdhci-pci-gli: Fix no irq handler from suspend
2020-05-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix gcc-10 compilation warning in nf_conntrack, from Arnd Bergmann. 2) Add NF_FLOW_HW_PENDING to avoid races between stats and deletion commands, from Paul Blakey. 3) Remove WQ_MEM_RECLAIM from the offload workqueue, from Roi Dayan. 4) Infinite loop when removing nf_conntrack module, from Florian Westphal. 5) Set NF_FLOW_TEARDOWN bit on expiration to avoid races when refreshing the timeout from the software path. 6) Missing nft_set_elem_expired() check in the rbtree, from Phil Sutter. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14MAINTAINERS: Add Jakub to networking drivers.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14MAINTAINERS: another add of Karsten Graul for S390 networkingUrsula Braun
Complete adding of Karsten as maintainer for all S390 networking parts in the kernel. Cc: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14drivers: ipa: fix typos for ipa_smp2p structure docWang Wenhu
Remove the duplicate "mutex", and change "Motex" to "Mutex". Also I recommend it's easier for understanding to make the "ready-interrupt" a bundle for it is a parallel description as "shutdown" which is appended after the slash. Signed-off-by: Wang Wenhu <wenhu.wang@vivo.com> Cc: Alex Elder <elder@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14pppoe: only process PADT targeted at local interfacesGuillaume Nault
We don't want to disconnect a session because of a stray PADT arriving while the interface is in promiscuous mode. Furthermore, multicast and broadcast packets make no sense here, so only PACKET_HOST is accepted. Reported-by: David Balažic <xerces9@gmail.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14selftests/bpf: Enforce returning 0 for fentry/fexit programsYonghong Song
There are a few fentry/fexit programs returning non-0. The tests with these programs will break with the previous patch which enfoced return-0 rules. Fix them properly. Fixes: ac065870d928 ("selftests/bpf: Add BPF_PROG, BPF_KPROBE, and BPF_KRETPROBE macros") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200514053207.1298479-1-yhs@fb.com
2020-05-14bpf: Enforce returning 0 for fentry/fexit progsYonghong Song
Currently, tracing/fentry and tracing/fexit prog return values are not enforced. In trampoline codes, the fentry/fexit prog return values are ignored. Let us enforce it to be 0 to avoid confusion and allows potential future extension. This patch also explicitly added return value checking for tracing/raw_tp, tracing/fmod_ret, and freplace programs such that these program return values can be anything. The purpose are two folds: 1. to make it explicit about return value expectations for these programs in verifier. 2. for tracing prog_type, if a future attach type is added, the default is -ENOTSUPP which will enforce to specify return value ranges explicitly. Fixes: fec56f5890d9 ("bpf: Introduce BPF trampoline") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200514053206.1298415-1-yhs@fb.com
2020-05-14net: stmmac: fix num_por initializationVinod Koul
Driver missed initializing num_por which is one of the por values that driver configures to hardware. In order to get these values, add a new structure ethqos_emac_driver_data which holds por and num_por values and populate that in driver probe. Fixes: a7c30e62d4b8 ("net: stmmac: Add driver for Qualcomm ethqos") Reported-by: Rahul Ankushrao Kawadgave <rahulak@qti.qualcomm.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14security: Fix the default value of secid_to_secctx hookAnders Roxell
security_secid_to_secctx is called by the bpf_lsm hook and a successful return value (i.e 0) implies that the parameter will be consumed by the LSM framework. The current behaviour return success when the pointer isn't initialized when CONFIG_BPF_LSM is enabled, with the default return from kernel/bpf/bpf_lsm.c. This is the internal error: [ 1229.341488][ T2659] usercopy: Kernel memory exposure attempt detected from null address (offset 0, size 280)! [ 1229.374977][ T2659] ------------[ cut here ]------------ [ 1229.376813][ T2659] kernel BUG at mm/usercopy.c:99! [ 1229.378398][ T2659] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 1229.380348][ T2659] Modules linked in: [ 1229.381654][ T2659] CPU: 0 PID: 2659 Comm: systemd-journal Tainted: G B W 5.7.0-rc5-next-20200511-00019-g864e0c6319b8-dirty #13 [ 1229.385429][ T2659] Hardware name: linux,dummy-virt (DT) [ 1229.387143][ T2659] pstate: 80400005 (Nzcv daif +PAN -UAO BTYPE=--) [ 1229.389165][ T2659] pc : usercopy_abort+0xc8/0xcc [ 1229.390705][ T2659] lr : usercopy_abort+0xc8/0xcc [ 1229.392225][ T2659] sp : ffff000064247450 [ 1229.393533][ T2659] x29: ffff000064247460 x28: 0000000000000000 [ 1229.395449][ T2659] x27: 0000000000000118 x26: 0000000000000000 [ 1229.397384][ T2659] x25: ffffa000127049e0 x24: ffffa000127049e0 [ 1229.399306][ T2659] x23: ffffa000127048e0 x22: ffffa000127048a0 [ 1229.401241][ T2659] x21: ffffa00012704b80 x20: ffffa000127049e0 [ 1229.403163][ T2659] x19: ffffa00012704820 x18: 0000000000000000 [ 1229.405094][ T2659] x17: 0000000000000000 x16: 0000000000000000 [ 1229.407008][ T2659] x15: 0000000000000000 x14: 003d090000000000 [ 1229.408942][ T2659] x13: ffff80000d5b25b2 x12: 1fffe0000d5b25b1 [ 1229.410859][ T2659] x11: 1fffe0000d5b25b1 x10: ffff80000d5b25b1 [ 1229.412791][ T2659] x9 : ffffa0001034bee0 x8 : ffff00006ad92d8f [ 1229.414707][ T2659] x7 : 0000000000000000 x6 : ffffa00015eacb20 [ 1229.416642][ T2659] x5 : ffff0000693c8040 x4 : 0000000000000000 [ 1229.418558][ T2659] x3 : ffffa0001034befc x2 : d57a7483a01c6300 [ 1229.420610][ T2659] x1 : 0000000000000000 x0 : 0000000000000059 [ 1229.422526][ T2659] Call trace: [ 1229.423631][ T2659] usercopy_abort+0xc8/0xcc [ 1229.425091][ T2659] __check_object_size+0xdc/0x7d4 [ 1229.426729][ T2659] put_cmsg+0xa30/0xa90 [ 1229.428132][ T2659] unix_dgram_recvmsg+0x80c/0x930 [ 1229.429731][ T2659] sock_recvmsg+0x9c/0xc0 [ 1229.431123][ T2659] ____sys_recvmsg+0x1cc/0x5f8 [ 1229.432663][ T2659] ___sys_recvmsg+0x100/0x160 [ 1229.434151][ T2659] __sys_recvmsg+0x110/0x1a8 [ 1229.435623][ T2659] __arm64_sys_recvmsg+0x58/0x70 [ 1229.437218][ T2659] el0_svc_common.constprop.1+0x29c/0x340 [ 1229.438994][ T2659] do_el0_svc+0xe8/0x108 [ 1229.440587][ T2659] el0_svc+0x74/0x88 [ 1229.441917][ T2659] el0_sync_handler+0xe4/0x8b4 [ 1229.443464][ T2659] el0_sync+0x17c/0x180 [ 1229.444920][ T2659] Code: aa1703e2 aa1603e1 910a8260 97ecc860 (d4210000) [ 1229.447070][ T2659] ---[ end trace 400497d91baeaf51 ]--- [ 1229.448791][ T2659] Kernel panic - not syncing: Fatal exception [ 1229.450692][ T2659] Kernel Offset: disabled [ 1229.452061][ T2659] CPU features: 0x240002,20002004 [ 1229.453647][ T2659] Memory Limit: none [ 1229.455015][ T2659] ---[ end Kernel panic - not syncing: Fatal exception ]--- Rework the so the default return value is -EOPNOTSUPP. There are likely other callbacks such as security_inode_getsecctx() that may have the same problem, and that someone that understand the code better needs to audit them. Thank you Arnd for helping me figure out what went wrong. Fixes: 98e828a0650f ("security: Refactor declaration of LSM hooks") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: James Morris <jamorris@linux.microsoft.com> Cc: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/bpf/20200512174607.9630-1-anders.roxell@linaro.org
2020-05-14libbpf: Fix register naming in PT_REGS s390 macrosSumanth Korikkar
Fix register naming in PT_REGS s390 macros Fixes: b8ebce86ffe6 ("libbpf: Provide CO-RE variants of PT_REGS macros") Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200513154414.29972-1-sumanthk@linux.ibm.com
2020-05-14bpf: Fix bug in mmap() implementation for BPF array mapAndrii Nakryiko
mmap() subsystem allows user-space application to memory-map region with initial page offset. This wasn't taken into account in initial implementation of BPF array memory-mapping. This would result in wrong pages, not taking into account requested page shift, being memory-mmaped into user-space. This patch fixes this gap and adds a test for such scenario. Fixes: fc9702273e2e ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200512235925.3817805-1-andriin@fb.com
2020-05-14samples: bpf: Fix build errorMatteo Croce
GCC 10 is very strict about symbol clash, and lwt_len_hist_user contains a symbol which clashes with libbpf: /usr/bin/ld: samples/bpf/lwt_len_hist_user.o:(.bss+0x0): multiple definition of `bpf_log_buf'; samples/bpf/bpf_load.o:(.bss+0x8c0): first defined here collect2: error: ld returned 1 exit status bpf_log_buf here seems to be a leftover, so removing it. Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200511113234.80722-1-mcroce@redhat.com
2020-05-14Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "7 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: kasan: add missing functions declarations to kasan.h kasan: consistently disable debugging features ipc/util.c: sysvipc_find_ipc() incorrectly updates position index userfaultfd: fix remap event with MREMAP_DONTUNMAP mm/gup: fix fixup_user_fault() on multiple retries epoll: call final ep_events_available() check under the lock mm, memcg: fix inconsistent oom event behavior
2020-05-14Merge tag 'for-linus-2020-05-13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull thread fix from Christian Brauner: "This contains a single fix for all exported legacy fork helpers to block accidental access to clone3() features in the upper 32 bits of their respective flags arguments. I got Cced on a glibc issue where someone reported consistent failures for the legacy clone() syscall on ppc64le when sign extension was performed (since the clone() syscall in glibc exposes the flags argument as an int whereas the kernel uses unsigned long). The legacy clone() syscall is odd in a bunch of ways and here two things interact: - First, legacy clone's flag argument is word-size dependent, i.e. it's an unsigned long whereas most system calls with flag arguments use int or unsigned int. - Second, legacy clone() ignores unknown and deprecated flags. The two of them taken together means that users on 64bit systems can pass garbage for the upper 32bit of the clone() syscall since forever and things would just work fine. The following program compiled on a 64bit kernel prior to v5.7-rc1 will succeed and will fail post v5.7-rc1 with EBADF: int main(int argc, char *argv[]) { pid_t pid; /* Note that legacy clone() has different argument ordering on * different architectures so this won't work everywhere. * * Only set the upper 32 bits. */ pid = syscall(__NR_clone, 0xffffffff00000000 | SIGCHLD, NULL, NULL, NULL, NULL); if (pid < 0) exit(EXIT_FAILURE); if (pid == 0) exit(EXIT_SUCCESS); if (wait(NULL) != pid) exit(EXIT_FAILURE); exit(EXIT_SUCCESS); } Since legacy clone() couldn't be extended this was not a problem so far and nobody really noticed or cared since nothing in the kernel ever bothered to look at the upper 32 bits. But once we introduced clone3() and expanded the flag argument in struct clone_args to 64 bit we opened this can of worms. With the first flag-based extension to clone3() making use of the upper 32 bits of the flag argument we've effectively made it possible for the legacy clone() syscall to reach clone3() only flags on accident. The sign extension scenario is just the odd corner-case that we needed to figure this out. The reason we just realized this now and not already when we introduced CLONE_CLEAR_SIGHAND was that CLONE_INTO_CGROUP assumes that a valid cgroup file descriptor has been given - whereas CLONE_CLEAR_SIGHAND doesn't need to verify anything. It just silently resets the signal handlers to SIG_DFL. So the sign extension (or the user accidently passing garbage for the upper 32 bits) caused the CLONE_INTO_CGROUP bit to be raised and the kernel to error out when it didn't find a valid cgroup file descriptor. Note, I'm also capping kernel_thread()'s flag argument mainly because none of the new features make sense for kernel_thread() and we shouldn't risk them being accidently activated however unlikely. If we wanted to, we could even make kernel_thread() yell when an unknown flag has been set which it doesn't do right now. But it's not worth risking this in a bugfix imho" * tag 'for-linus-2020-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: fork: prevent accidental access to clone3 features
2020-05-14Merge tag 'trace-v5.7-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull more tracing fixes from Steven Rostedt: "Various tracing fixes: - Fix a crash when having function tracing and function stack tracing on the command line. The ftrace trampolines are created as executable and read only. But the stack tracer tries to modify them with text_poke() which expects all kernel text to still be writable at boot. Keep the trampolines writable at boot, and convert them to read-only with the rest of the kernel. - A selftest was triggering in the ring buffer iterator code, that is no longer valid with the update of keeping the ring buffer writable while a iterator is reading. Just bail after three failed attempts to get an event and remove the warning and disabling of the ring buffer. - While modifying the ring buffer code, decided to remove all the unnecessary BUG() calls" * tag 'trace-v5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ring-buffer: Remove all BUG() calls ring-buffer: Don't deactivate the ring buffer on failed iterator reads x86/ftrace: Have ftrace trampolines turn read-only at the end of system boot up
2020-05-14Merge tag 'pm-5.7-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Prevent the suspend-to-idle internal loop from busy spinning after a spurious ACPI SCI wakeup in some cases" * tag 'pm-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: EC: PM: Avoid premature returns from acpi_s2idle_wake()
2020-05-14kasan: add missing functions declarations to kasan.hAndrey Konovalov
KASAN is currently missing declarations for __asan_report* and __hwasan* functions. This can lead to compiler warnings. Reported-by: Leon Romanovsky <leon@kernel.org> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Leon Romanovsky <leon@kernel.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Link: http://lkml.kernel.org/r/45b445a76a79208918f0cc44bfabebaea909b54d.1589297433.git.andreyknvl@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-14kasan: consistently disable debugging featuresAndrey Konovalov
KASAN is incompatible with some kernel debugging/tracing features. There's been multiple patches that disable those feature for some of KASAN files one by one. Instead of prolonging that, disable these features for all KASAN files at once. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Leon Romanovsky <leonro@mellanox.com> Link: http://lkml.kernel.org/r/29bd753d5ff5596425905b0b07f51153e2345cc1.1589297433.git.andreyknvl@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-14ipc/util.c: sysvipc_find_ipc() incorrectly updates position indexVasily Averin
Commit 89163f93c6f9 ("ipc/util.c: sysvipc_find_ipc() should increase position index") is causing this bug (seen on 5.6.8): # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages # ipcmk -Q Message queue id: 0 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x82db8127 0 root 644 0 0 # ipcmk -Q Message queue id: 1 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x82db8127 0 root 644 0 0 0x76d1fb2a 1 root 644 0 0 # ipcrm -q 0 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x76d1fb2a 1 root 644 0 0 0x76d1fb2a 1 root 644 0 0 # ipcmk -Q Message queue id: 2 # ipcrm -q 2 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x76d1fb2a 1 root 644 0 0 0x76d1fb2a 1 root 644 0 0 # ipcmk -Q Message queue id: 3 # ipcrm -q 1 # ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x7c982867 3 root 644 0 0 0x7c982867 3 root 644 0 0 0x7c982867 3 root 644 0 0 0x7c982867 3 root 644 0 0 Whenever an IPC item with a low id is deleted, the items with higher ids are duplicated, as if filling a hole. new_pos should jump through hole of unused ids, pos can be updated inside "for" cycle. Fixes: 89163f93c6f9 ("ipc/util.c: sysvipc_find_ipc() should increase position index") Reported-by: Andreas Schwab <schwab@suse.de> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Waiman Long <longman@redhat.com> Cc: NeilBrown <neilb@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/4921fe9b-9385-a2b4-1dc4-1099be6d2e39@virtuozzo.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-14userfaultfd: fix remap event with MREMAP_DONTUNMAPBrian Geffon
A user is not required to set a new address when using MREMAP_DONTUNMAP as it can be used without MREMAP_FIXED. When doing so the remap event will use new_addr which may not have been set and we didn't propagate it back other then in the return value of remap_to. Because ret is always the new address it's probably more correct to use it rather than new_addr on the remap_event_complete call, and it resolves this bug. Fixes: e346b3813067d4b ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Brian Geffon <bgeffon@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: "Michael S . Tsirkin" <mst@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Link: http://lkml.kernel.org/r/20200506172158.218366-1-bgeffon@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-14mm/gup: fix fixup_user_fault() on multiple retriesPeter Xu
This part was overlooked when reworking the gup code on multiple retries. When we get the 2nd+ retry, we'll be with TRIED flag set. Current code will bail out on the 2nd retry because the !TRIED check will fail so the retry logic will be skipped. What's worse is that, it will also return zero which errornously hints the caller that the page is faulted in while it's not. The !TRIED flag check seems to not be needed even before the mutliple retries change because if we get a VM_FAULT_RETRY, it must be the 1st retry, and we should not have TRIED set for that. Fix it by removing the !TRIED check, at the meantime check against fatal signals properly before the page fault so we can still properly respond to the user killing the process during retries. Fixes: 4426e945df58 ("mm/gup: allow VM_FAULT_RETRY for multiple times") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Brian Geffon <bgeffon@google.com> Link: http://lkml.kernel.org/r/20200502003523.8204-1-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-14epoll: call final ep_events_available() check under the lockRoman Penyaev
There is a possible race when ep_scan_ready_list() leaves ->rdllist and ->obflist empty for a short period of time although some events are pending. It is quite likely that ep_events_available() observes empty lists and goes to sleep. Since commit 339ddb53d373 ("fs/epoll: remove unnecessary wakeups of nested epoll") we are conservative in wakeups (there is only one place for wakeup and this is ep_poll_callback()), thus ep_events_available() must always observe correct state of two lists. The easiest and correct way is to do the final check under the lock. This does not impact the performance, since lock is taken anyway for adding a wait entry to the wait queue. The discussion of the problem can be found here: https://lore.kernel.org/linux-fsdevel/a2f22c3c-c25a-4bda-8339-a7bdaf17849e@akamai.com/ In this patch barrierless __set_current_state() is used. This is safe since waitqueue_active() is called under the same lock on wakeup side. Short-circuit for fatal signals (i.e. fatal_signal_pending() check) is moved to the line just before actual events harvesting routine. This is fully compliant to what is said in the comment of the patch where the actual fatal_signal_pending() check was added: c257a340ede0 ("fs, epoll: short circuit fetching events if thread has been killed"). Fixes: 339ddb53d373 ("fs/epoll: remove unnecessary wakeups of nested epoll") Reported-by: Jason Baron <jbaron@akamai.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Roman Penyaev <rpenyaev@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jason Baron <jbaron@akamai.com> Cc: Khazhismel Kumykov <khazhy@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200505145609.1865152-1-rpenyaev@suse.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-14mm, memcg: fix inconsistent oom event behaviorYafang Shao
A recent commit 9852ae3fe529 ("mm, memcg: consider subtrees in memory.events") changed the behavior of memcg events, which will now consider subtrees in memory.events. But oom_kill event is a special one as it is used in both cgroup1 and cgroup2. In cgroup1, it is displayed in memory.oom_control. The file memory.oom_control is in both root memcg and non root memcg, that is different with memory.event as it only in non-root memcg. That commit is okay for cgroup2, but it is not okay for cgroup1 as it will cause inconsistent behavior between root memcg and non-root memcg. Here's an example on why this behavior is inconsistent in cgroup1. root memcg / memcg foo / memcg bar Suppose there's an oom_kill in memcg bar, then the oon_kill will be root memcg : memory.oom_control(oom_kill) 0 / memcg foo : memory.oom_control(oom_kill) 1 / memcg bar : memory.oom_control(oom_kill) 1 For the non-root memcg, its memory.oom_control(oom_kill) includes its descendants' oom_kill, but for root memcg, it doesn't include its descendants' oom_kill. That means, memory.oom_control(oom_kill) has different meanings in different memcgs. That is inconsistent. Then the user has to know whether the memcg is root or not. If we can't fully support it in cgroup1, for example by adding memory.events.local into cgroup1 as well, then let's don't touch its original behavior. Fixes: 9852ae3fe529 ("mm, memcg: consider subtrees in memory.events") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Chris Down <chris@chrisdown.name> Acked-by: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200502141055.7378-1-laoar.shao@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-14ALSA: hda/realtek - Limit int mic boost for Thinkpad T530Takashi Iwai
Lenovo Thinkpad T530 seems to have a sensitive internal mic capture that needs to limit the mic boost like a few other Thinkpad models. Although we may change the quirk for ALC269_FIXUP_LENOVO_DOCK, this hits way too many other laptop models, so let's add a new fixup model that limits the internal mic boost on top of the existing quirk and apply to only T530. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1171293 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200514160533.10337-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-05-14ring-buffer: Remove all BUG() callsSteven Rostedt (VMware)
There's a lot of checks to make sure the ring buffer is working, and if an anomaly is detected, it safely shuts itself down. But there's a few cases that it will call BUG(), which defeats the point of being safe (it crashes the kernel when an anomaly is found!). There's no reason for them. Switch them all to either WARN_ON_ONCE() (when no ring buffer descriptor is present), or to RB_WARN_ON() (when a ring buffer descriptor is present). Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-05-14ring-buffer: Don't deactivate the ring buffer on failed iterator readsSteven Rostedt (VMware)
If the function tracer is running and the trace file is read (which uses the ring buffer iterator), the iterator can get in sync with the writes, and caues it to fail to find a page with content it can read three times. This causes a warning and deactivation of the ring buffer code. Looking at the other cases of failure to get an event, it appears that there's a chance that the writer could cause them too. Since the iterator is a "best effort" to read the ring buffer if there's an active writer (the consumer reader is made for this case "see trace_pipe"), if it fails to get an event after three tries, simply give up and return NULL. Don't warn, nor disable the ring buffer on this failure. Link: https://lore.kernel.org/r/20200429090508.GG5770@shao2-debian Reported-by: kernel test robot <lkp@intel.com> Fixes: ff84c50cfb4b ("ring-buffer: Do not die if rb_iter_peek() fails more than thrice") Tested-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-05-14Merge tag 'amd-drm-fixes-5.7-2020-05-13' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.7-2020-05-13: amdgpu: - Clockgating fixes - Fix fbdev with scatter/gather display - S4 fix for navi - Soft recovery for gfx10 - Freesync fixes - Atomic check cursor fix - Add a gfxoff quirk - MST fix amdkfd: - Fix GEM reference counting Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200514034046.3988-1-alexander.deucher@amd.com
2020-05-14Merge tag 'drm/tegra/for-5.7-fixes' of ↵Dave Airlie
git://anongit.freedesktop.org/tegra/linux into drm-fixes drm/tegra: Fixes for v5.7 This contains a pair of patches which fix SMMU support on Tegra124 and Tegra210 for host1x and the Tegra DRM driver. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200508101355.3031268-1-thierry.reding@gmail.com
2020-05-14Merge tag 'drm-intel-fixes-2020-05-07' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fixes on execlist to avoid GPU hang situation (Chris) - Fixes couple deadlocks (Chris) - Timeslice preemption fixes (Chris) - Fix Display Port interrupt handling on Tiger Lake (Imre) - Reduce debug noise around Frame Buffer Compression (Peter) - Fix logic around IPC W/a for Coffee Lake and Kaby Lake (Sultan) - Avoid dereferencing a dead context (Chris) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200508052437.GA3212215@intel.com
2020-05-13riscv: mmiowb: Fix implicit declaration of function 'smp_processor_id'Kefeng Wang
In file included from ./../include/linux/compiler_types.h:68, from <command-line>: ../include/asm-generic/mmiowb.h: In function ‘mmiowb_set_pending’: ../include/asm-generic/percpu.h:34:38: error: implicit declaration of function ‘smp_processor_id’; did you mean ‘raw_smp_processor_id’? [-Werror=implicit-function-declaration] #define my_cpu_offset per_cpu_offset(smp_processor_id()) ^~~~~~~~~~~~~~~~ ../include/linux/compiler-gcc.h:58:26: note: in definition of macro ‘RELOC_HIDE’ (typeof(ptr)) (__ptr + (off)); \ ^~~ ../include/linux/percpu-defs.h:249:2: note: in expansion of macro ‘SHIFT_PERCPU_PTR’ SHIFT_PERCPU_PTR(ptr, my_cpu_offset); \ ^~~~~~~~~~~~~~~~ ../include/asm-generic/percpu.h:34:23: note: in expansion of macro ‘per_cpu_offset’ #define my_cpu_offset per_cpu_offset(smp_processor_id()) ^~~~~~~~~~~~~~ ../include/linux/percpu-defs.h:249:24: note: in expansion of macro ‘my_cpu_offset’ SHIFT_PERCPU_PTR(ptr, my_cpu_offset); \ ^~~~~~~~~~~~~ ../include/asm-generic/mmiowb.h:30:26: note: in expansion of macro ‘this_cpu_ptr’ #define __mmiowb_state() this_cpu_ptr(&__mmiowb_state) ^~~~~~~~~~~~ ../include/asm-generic/mmiowb.h:37:28: note: in expansion of macro ‘__mmiowb_state’ struct mmiowb_state *ms = __mmiowb_state(); ^~~~~~~~~~~~~~ Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-05-13riscv: pgtable: Fix __kernel_map_pages build error if NOMMUKefeng Wang
riscv64-none-linux-gnu-ld: mm/page_alloc.o: in function `.L0 ': page_alloc.c:(.text+0xd34): undefined reference to `__kernel_map_pages' riscv64-none-linux-gnu-ld: page_alloc.c:(.text+0x104a): undefined reference to `__kernel_map_pages' riscv64-none-linux-gnu-ld: mm/page_alloc.o: in function `__pageblock_pfn_to_page': page_alloc.c:(.text+0x145e): undefined reference to `__kernel_map_pages' Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-05-13net: phy: fix aneg restart in phy_ethtool_set_eeeHeiner Kallweit
phy_restart_aneg() enables aneg in the PHY. That's not what we want if phydev->autoneg is disabled. In this case still update EEE advertisement register, but don't enable aneg and don't trigger an aneg restart. Fixes: f75abeb8338e ("net: phy: restart phy autonegotiation after EEE advertisment change") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13drm/i915: Handle idling during i915_gem_evict_something busy loopsChris Wilson
i915_gem_evict_something() is charged with finding a slot within the GTT that we may reuse. Since our goal is not to stall, we first look for a slot that only overlaps idle vma. To this end, on the first pass we move any active vma to the end of the search list. However, we only stopped moving active vma after we see the first active vma twice. If during the search, that first active vma completed, we would not notice and keep on extending the search list. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1746 Fixes: 2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm->mutex") Fixes: b1e3177bd1d8 ("drm/i915: Coordinate i915_active with its own mutex") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: <stable@vger.kernel.org> # v5.5+ Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200509115217.26853-1-chris@chris-wilson.co.uk (cherry picked from commit 73e28cc40bf00b5d168cb8f5cff1ae63e9097446) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-05-13net: broadcom: Select BROADCOM_PHY for BCMGENETFlorian Fainelli
The GENET controller on the Raspberry Pi 4 (2711) is typically interfaced with an external Broadcom PHY via a RGMII electrical interface. To make sure that delays are properly configured at the PHY side, ensure that we the dedicated Broadcom PHY driver (CONFIG_BROADCOM_PHY) is enabled for this to happen. Fixes: 402482a6a78e ("net: bcmgenet: Clear ID_MODE_DIS in EXT_RGMII_OOB_CTRL when not needed") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13Merge branch 'tipc-fixes'David S. Miller
Tuong Lien says: ==================== tipc: add some patches This series adds patches to fix some issues in TIPC streaming & service subscription. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13tipc: fix failed service subscription deletionTuong Lien
When a service subscription is expired or canceled by user, it needs to be deleted from the subscription list, so that new subscriptions can be registered (max = 65535 per net). However, there are two issues in code that can cause such an unused subscription to persist: 1) The 'tipc_conn_delete_sub()' has a loop on the subscription list but it makes a break shortly when the 1st subscription differs from the one specified, so the subscription will not be deleted. 2) In case a subscription is canceled, the code to remove the 'TIPC_SUB_CANCEL' flag from the subscription filter does not work if it is a local subscription (i.e. the little endian isn't involved). So, it will be no matches when looking for the subscription to delete later. The subscription(s) will be removed eventually when the user terminates its topology connection but that could be a long time later. Meanwhile, the number of available subscriptions may be exhausted. This commit fixes the two issues above, so as needed a subscription can be deleted correctly. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13tipc: fix memory leak in service subscriptingTuong Lien
Upon receipt of a service subscription request from user via a topology connection, one 'sub' object will be allocated in kernel, so it will be able to send an event of the service if any to the user correspondingly then. Also, in case of any failure, the connection will be shutdown and all the pertaining 'sub' objects will be freed. However, there is a race condition as follows resulting in memory leak: receive-work connection send-work | | | sub-1 |<------//-------| | sub-2 |<------//-------| | | |<---------------| evt for sub-x sub-3 |<------//-------| | : : : : : : | /--------| | | | * peer closed | | | | | | | |<-------X-------| evt for sub-y | | |<===============| sub-n |<------/ X shutdown | -> orphan | | That is, the 'receive-work' may get the last subscription request while the 'send-work' is shutting down the connection due to peer close. We had a 'lock' on the connection, so the two actions cannot be carried out simultaneously. If the last subscription is allocated e.g. 'sub-n', before the 'send-work' closes the connection, there will be no issue at all, the 'sub' objects will be freed. In contrast the last subscription will become orphan since the connection was closed, and we released all references. This commit fixes the issue by simply adding one test if the connection remains in 'connected' state right after we obtain the connection lock, then a subscription object can be created as usual, otherwise we ignore it. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Reported-by: Thang Ngo <thang.h.ngo@dektech.com.au> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13tipc: fix large latency in smart Nagle streamingTuong Lien
Currently when a connection is in Nagle mode, we set the 'ack_required' bit in the last sending buffer and wait for the corresponding ACK prior to pushing more data. However, on the receiving side, the ACK is issued only when application really reads the whole data. Even if part of the last buffer is received, we will not do the ACK as required. This might cause an unnecessary delay since the receiver does not always fetch the message as fast as the sender, resulting in a large latency in the user message sending, which is: [one RTT + the receiver processing time]. The commit makes Nagle ACK as soon as possible i.e. when a message with the 'ack_required' arrives in the receiving side's stack even before it is processed or put in the socket receive queue... This way, we can limit the streaming latency to one RTT as committed in Nagle mode. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13Merge branch 's390-fixes'David S. Miller
Ursula Braun says: ==================== s390/net: updates 2020-05-13 please apply the fix from Wei Yongjun to netdev's net tree and add Karsten Graul as co-maintainer for drivers/s390/net. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13MAINTAINERS: add Karsten Graul as S390 NETWORK DRIVERS maintainerUrsula Braun
Add Karsten as additional maintainer for drivers/s390/net . One of his focal points is the ism driver. Cc: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13s390/ism: fix error return code in ism_probe()Wei Yongjun
Fix to return negative error code -ENOMEM from the smcd_alloc_dev() error handling case instead of 0, as done elsewhere in this function. Fixes: 684b89bc39ce ("s390/ism: add device driver for internal shared memory") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13hwmon: (da9052) Synchronize access with mfdSamu Nuutamo