| Age | Commit message (Collapse) | Author |
|---|
|
When I tested my new patches, I found that page pointer which is used
for setting page_owner information is changed. This is because page
pointer is used to set new migratetype in loop. After this work, page
pointer could be out of bound. If this wrong pointer is used for
page_owner, access violation happens. Below is error message that I
got.
BUG: unable to handle kernel paging request at 0000000000b00018
IP: [<ffffffff81025f30>] save_stack_address+0x30/0x40
PGD 1af2d067 PUD 166e0067 PMD 0
Oops: 0002 [#1] SMP
...snip...
Call Trace:
print_context_stack+0xcf/0x100
dump_trace+0x15f/0x320
save_stack_trace+0x2f/0x50
__set_page_owner+0x46/0x70
__isolate_free_page+0x1f7/0x210
split_free_page+0x21/0xb0
isolate_freepages_block+0x1e2/0x410
compaction_alloc+0x22d/0x2d0
migrate_pages+0x289/0x8b0
compact_zone+0x409/0x880
compact_zone_order+0x6d/0x90
try_to_compact_pages+0x110/0x210
__alloc_pages_direct_compact+0x3d/0xe6
__alloc_pages_nodemask+0x6cd/0x9a0
alloc_pages_current+0x91/0x100
runtest_store+0x296/0xa50
simple_attr_write+0xbd/0xe0
__vfs_write+0x28/0xf0
vfs_write+0xa9/0x1b0
SyS_write+0x46/0xb0
system_call_fastpath+0x16/0x75
This patch fixes this error by moving up set_page_owner().
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
fsnotify_clear_marks_by_group_flags() can race with
fsnotify_destroy_marks() so when fsnotify_destroy_mark_locked() drops
mark_mutex, a mark from the list iterated by
fsnotify_clear_marks_by_group_flags() can be freed and we dereference free
memory in the loop there.
Fix the problem by keeping mark_mutex held in
fsnotify_destroy_mark_locked(). The reason why we drop that mutex is that
we need to call a ->freeing_mark() callback which may acquire mark_mutex
again. To avoid this and similar lock inversion issues, we move the call
to ->freeing_mark() callback to the kthread destroying the mark.
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Ashish Sangwan <a.sangwan@samsung.com>
Suggested-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
/proc/*/cmdline code checks if it should look at ENVP area by checking
last byte of ARGV area:
rv = access_remote_vm(mm, arg_end - 1, &c, 1, 0);
if (rv <= 0)
goto out_free_page;
If ARGV is somehow made empty (by doing execve(..., NULL, ...) or
manually setting ->arg_start and ->arg_end to equal values), the decision
will be based on byte which doesn't even belong to ARGV/ENVP.
So, quickly check if ARGV area is empty and report 0 to match previous
behaviour.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If dma-debug is disabled due to a memory error, DMA unmaps do not affect
the dma_active_cacheline radix tree anymore, and debug_dma_assert_idle()
can print false warnings.
Disable debug_dma_assert_idle() when dma_debug_disabled() is true.
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Fixes: 0abdd7a81b7e ("dma-debug: introduce debug_dma_assert_idle()")
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Horia Geanta <horia.geanta@freescale.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A hexdump with a buf not aligned to the groupsize causes
non-naturally-aligned memory accesses. This was causing a kernel panic
on the processor BlackFin BF527, when such an unaligned buffer was fed
by the function ubifs_scanned_corruption in fs/ubifs/scan.c .
To fix this, change accesses to the contents of the buffer so they go
through get_unaligned(). This change should be harmless to unaligned-
access-capable architectures, and any performance hit should be anyway
dwarfed by the snprintf() processing time.
Signed-off-by: Horacio Mijail Antón Quiles <hmijail@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Joe Perches <joe@perches.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Changes in ("checkpatch: categorize some long line length checks")
now erroneously reports long line defects in patch context.
Fix it.
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 2ae416b142b6 ("mm: new mm hook framework") introduced an empty
header file (mm-arch-hooks.h) for every architecture, even those which
doesn't need to define mm hooks.
As suggested by Geert Uytterhoeven, this could be cleaned through the use
of a generic header file included via each per architecture
asm/include/Kbuild file.
The PowerPC architecture is not impacted here since this architecture has
to defined the arch_remap MM hook.
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since the get_maintainer script still reports my old email id based on
few old commits, update mailmap to report new/updated address. It also
helps to fix email address for 'git shortlog'
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Switch to my kernel.org alias instead of a badly named gmail address,
which I rarely use.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The kbuild test robot reported the following
tree: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
head: 14a6f1989dae9445d4532941bdd6bbad84f4c8da
commit: 3b242c66ccbd60cf47ab0e8992119d9617548c23 x86: mm: enable deferred struct page initialisation on x86-64
date: 3 days ago
config: x86_64-randconfig-x006-201527 (attached as .config)
reproduce:
git checkout 3b242c66ccbd60cf47ab0e8992119d9617548c23
# save the attached .config to linux build tree
make ARCH=x86_64
All warnings (new ones prefixed by >>):
mm/page_alloc.c: In function 'early_page_uninitialised':
>> mm/page_alloc.c:247:6: warning: unused variable 'nid' [-Wunused-variable]
int nid = early_pfn_to_nid(pfn);
It's due to the NODE_DATA macro ignoring the nid parameter on !NUMA
configurations. This patch avoids the warning by not declaring nid.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some modules call config_item_init_type_name() and config_group_init_type_name()
with parameter "name" directly controlled by userspace. These two
functions call config_item_set_name() with this name used as a format
string, which can be used to leak information such as content of the
stack to userspace.
For example, make_netconsole_target() in netconsole module calls
config_item_init_type_name() with the name of a newly-created directory.
This means that the following commands give some unexpected output, with
configfs mounted in /sys/kernel/config/ and on a system with a
configured eth0 ethernet interface:
# modprobe netconsole
# mkdir /sys/kernel/config/netconsole/target_%lx
# echo eth0 > /sys/kernel/config/netconsole/target_%lx/dev_name
# echo 1 > /sys/kernel/config/netconsole/target_%lx/enabled
# echo eth0 > /sys/kernel/config/netconsole/target_%lx/dev_name
# dmesg |tail -n1
[ 142.697668] netconsole: target (target_ffffffffc0ae8080) is
enabled, disable to update parameters
The directory name is correct but %lx has been interpreted in the
internal item name, displayed here in the error message used by
store_dev_name() in drivers/net/netconsole.c.
To fix this, update every caller of config_item_set_name to use "%s"
when operating on untrusted input.
This issue was found using -Wformat-security gcc flag, once a __printf
attribute has been added to config_item_set_name().
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Using __printf attributes helps to detect several format string issues
at compile time (even though -Wformat-security is currently disabled in
Makefile). For example it can detect when formatting a pointer as a
number, like the issue fixed in commit a3fa71c40f18 ("wl18xx: show
rx_frames_per_rates as an array as it really is"), or when the arguments
do not match the format string, c.f. for example commit 5ce1aca81435
("reiserfs: fix __RASSERT format string").
To prevent similar bugs in the future, add a __printf attribute to every
function prototype which needs one in include/linux/ and lib/. These
functions were mostly found by using gcc's -Wsuggest-attribute=format
flag.
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On s390 we only can enable hugepages if the underlying hardware/hypervisor
also does support this. Common code now would assume this to be
signaled by setting HPAGE_SHIFT to 0. But on s390, where we only
support one hugepage size, there is a link between HPAGE_SHIFT and
pageblock_order.
So instead of setting HPAGE_SHIFT to 0, we will implement the check for
the hardware capability.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
s390 has a constant hugepage size, by setting HPAGE_SHIFT we also change
e.g. the pageblock_order, which should be independent in respect to
hugepage support.
With this patch every architecture is free to define how to check
for hugepage support.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Heiko noticed that the current check for hugepage support on s390 is a
little bit too harsh as systems which do not support will crash.
The reason is that pageblock_order can now get negative when we set
HPAGE_SHIFT to 0. To avoid all this and to avoid opening another can of
worms with enabling HUGETLB_PAGE_SIZE_VARIABLE I think it would be best
to simply allow architectures to define their own hugepages_supported().
Revert bea41197ead3 ("s390/mm: make hugepages_supported a boot time
decision") in preparation.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Heiko noticed that the current check for hugepage support on s390 is a
little bit too harsh as systems which do not support will crash.
The reason is that pageblock_order can now get negative when we set
HPAGE_SHIFT to 0. To avoid all this and to avoid opening another can of
worms with enabling HUGETLB_PAGE_SIZE_VARIABLE I think it would be best
to simply allow architectures to define their own hugepages_supported().
This patch (of 4): revert commit cf54e2fce51c ("s390/mm: change
HPAGE_SHIFT type to int") in preparation.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
openrisc-allnoconfig:
kernel/uid16.c: In function 'SYSC_setgroups16':
kernel/uid16.c:184:2: error: implicit declaration of function 'groups_alloc'
kernel/uid16.c:184:13: warning: assignment makes pointer from integer without a cast
openrisc shouldn't be setting CONFIG_UID16 when CONFIG_MULTIUSER=n.
Fixes: 2813893f8b197a1 ("kernel: conditionally support non-root users, groups and capabilities")
Reported-by: Fengguang Wu <fengguang.wu@gmail.com>
Cc: Iulia Manda <iulia.manda21@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I am moving from mhocko@suse.cz to mhocko@kernel.org for kernel related
stuff.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The purpose of the option was documented in
Documentation/filesystems/proc.txt but the help text was missing.
Add small help text that also points to the documentation.
Signed-off-by: Iago López Galeiras <iago@endocode.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since suse.{de,cz} is deprecated to use (but will still work for some
time), switch to suse.com which is now to be used instead.
Signed-off-by: Jiri Slaby <jslaby@suse.com>
Acked-by: Alexander Graf <agraf@suse.de>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Hannes Reinecke <hare@suse.com>
Acked-by: Jan Kara <jack@suse.com>
Acked-by: Jean Delvare <jdelvare@suse.com>
Acked-by: Jiri Kosina <jkosina@suse.com>
Acked-by: Michal Marek <mmarek@suse.com>
Acked-by: NeilBrown <neilb@suse.com>
Acked-by: Oliver Neukum <oneukum@suse.de>
Acked-by: Takashi Iwai <tiwai@suse.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Acked-by: Tomas Cech <sleep_walker@suse.com>
Acked-by: Vojtech Pavlik <vojtech@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Remove the 'flags' variable in order to fix the following warning:
drivers/rtc/rtc-armada38x.c:91:22: warning: unused variable 'flags' [-Wunused-variable]
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
|
rtc_sysfs_add_device checks if device can wakeup before creating the
wakealarm file in sysfs. Thus the driver must set wakeup capability
before registering the rtc device.
Signed-off-by: Wei-Ning Huang <wnhuang@google.com>
Acked-by: Eddie Huang <eddie.huang@mediatek.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver fixes from Greg KH:
"Here's some staging and IIO driver fixes for 4.2-rc3.
Nothing major, the majority are IIO issues that were reported, with a
few other minor staging driver fixes. All have been in linux-next for
a while with no reported issues"
* tag 'staging-4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (25 commits)
staging: vt6656: check ieee80211_bss_conf bssid not NULL
staging: vt6655: check ieee80211_bss_conf bssid not NULL
staging:lustre: remove irq.h from socklnd.h
staging: make board support depend on OF_IRQ and CLKDEV_LOOKUP
iio: tmp006: Check channel info on write
iio: sx9500: Add missing init in sx9500_buffer_pre{en,dis}able()
iio:light:ltr501: fix regmap dependency
iio:light:ltr501: fix variable in ltr501_init
iio: sx9500: fix bug in compensation code
iio: sx9500: rework error handling of raw readings
iio: magnetometer: mmc35240: fix available sampling frequencies
iio:light:stk3310: Fix REGMAP_I2C dependency
iio: light: STK3310: un-invert proximity values
iio:adc:cc10001_adc: fix Kconfig dependency
iio: light: tcs3414: Fix bug preventing to set integration time
iio:accel:bmc150-accel: fix counting direction
iio:light:cm3323: clear bitmask before set
iio: adc: at91_adc: allow to use full range of startup time
iio: DAC: ad5624r_spi: fix bit shift of output data value
iio: proximity: sx9500: Fix proximity value
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here's some USB driver fixes for 4.2-rc3.
The ususal number of gadget driver fixes are in here, along with some
new device ids and a build fix for the mn10300 arch which required
some symbols to be renamed in the mos7720 driver.
All have been in linux-next for a while with no reported issues"
* tag 'usb-4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: Destroy serial_minors IDR on module exit
usb: gadget: f_midi: fix error recovery path
usb: phy: mxs: suspend to RAM causes NULL pointer dereference
usb: gadget: udc: fix free_irq() after request_irq() failed
usb: gadget: composite: Fix NULL pointer dereference
usb: gadget: f_fs: do not set cancel function on synchronous {read,write}
usb: f_mass_storage: limit number of reported LUNs
usb: dwc3: core: avoid NULL pointer dereference
usb: dwc2: embed storage for reg backup in struct dwc2_hsotg
usb: dwc2: host: allocate qtd before atomic enqueue
usb: dwc2: host: allocate qh before atomic enqueue
usb: musb: host: rely on port_mode to call musb_start()
USB: cp210x: add ID for Aruba Networks controllers
USB: mos7720: rename registers
USB: option: add 2020:4000 ID
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"There are two small fixes for HD-audio and USB LINE6, and the rest are
a few new quirks and device ID addition that are good enough to get
into 4.2"
* tag 'sound-4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Enable HP amp and mute LED on HP Folio 9480m [v3]
ALSA: line6: Fix -EBUSY error during active monitoring
ALSA: hda - Fix a wrong busy check in alt PCM open
ALSA: hda - add codec ID for Broxton display audio codec
ALSA: usb-audio: Add MIDI support for Steinberg MI2/MI4
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"This is a first set of GPIO fixes for the v4.2 series, all hitting
individual drivers and nothing else (except for a documentation
oneliner. I intended to send a request earlier but life intervened)"
* tag 'gpio-v4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: pca953x: fix nested irqs rescheduling
gpio: omap: prevent module from being unloaded while in use
gpio: max732x: Add missing dev reference to gpiochip
gpio/xilinx: Use correct address when setting initial values.
gpio: zynq: Fix problem with unbalanced pm_runtime_enable
gpio: omap: add missed spin_unlock_irqrestore in omap_gpio_irq_type
gpio: brcmstb: fix null ptr dereference in driver remove
gpio: Remove double "base" in comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into fixes
Merge "ARM: Couple of dts fixes for v4.2-rcx" from Santosh Shilimkar:
Couple of DTS fixes 4.2-rcx for Keystone EVMs:
K2E EVM boot hangs because of missing serdes driver which is needed to bring up
PCIe on K2E. These couple of fixes makes the PCIE disabled on common default and
let the specific board DTS to enable it.
* tag 'keystone-dts-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: keystone: dts: rename pcie nodes to help override status
ARM: keystone: dts: fix dt bindings for PCIe
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Pull drm fixes from Dave Airlie:
"Fixes all over the place.
The rockchip and imx fixes I missed while on holidays, so I've queued
them now which makes this a bit bigger.
The rest is misc amdgpu, radeon, i915 and armada.
I think the most important thing is the ioctl fix, we dropped the
avoid compat ball, so we get to add a compat wrapper.
There is also an i915 revert to avoid a regression with existing
userspace"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (43 commits)
drm/ttm: improve uncached page deallocation.
drm/ttm: fix uncached page deallocation to properly fill page pool v3.
drm/amdgpu/dce8: Re-set VBLANK interrupt state when enabling a CRTC
drm/radeon/ci: silence a harmless PCC warning
drm/amdgpu/cz: silence some dpm debug output
drm/amdgpu/cz: store the forced dpm level
drm/amdgpu/cz: unforce dpm levels before forcing to low/high
drm/amdgpu: remove bogus check in gfx8 rb setup
drm/amdgpu: set proper index/data pair for smc regs on CZ (v2)
drm/amdgpu: disable the IP module if early_init returns -ENOENT (v2)
drm/amdgpu: stop context leak in the error path
drm/amdgpu: validate the context id in the dependencies
drm/radeon: fix user ptr race condition
drm/radeon: Don't flush the GART TLB if rdev->gart.ptr == NULL
drm/radeon: add a dpm quirk for Sapphire Radeon R9 270X 2GB GDDR5
drm/armada: avoid saving the adjusted mode to crtc->mode
drm/armada: fix overlay when partially off-screen
drm/armada: convert overlay to use drm_plane_helper_check_update()
drm/armada: fix gem object free after failed prime import
drm/armada: fix incorrect overlay plane cleanup
...
|
|
Fengguang Wu reports that building ARM with !MMU results in the
following build error:
arch/arm/kernel/built-in.o: In function `__soft_restart':
>> :(.text+0x1624): undefined reference to `arch_virt_to_idmap'
Fix this by adding an appropriate IS_ENABLED(CONFIG_MMU) into the
__virt_to_idmap() inline function.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
We must invalidate the L1 cache before enabling coherency, otherwise
secondary CPUs can inject invalid cache lines into the coherent CPU
cluster, which could then be migrated to other CPUs. This fixes a
recent regression with SoCFPGA randomly failing to boot.
Fixes: 02b4e2756e01 ("ARM: v7 setup function should invalidate L1 cache")
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
nr_bitmaps member of mapping structure stores the number of already
allocated bitmaps and it is interpreted as loop iterator (it starts from
0 not from 1), so a comparison against number of possible bitmap
extensions should include this fact. This patch fixes this by changing
the extension failure condition. This issue has been introduced by
commit 4d852ef8c2544ce21ae41414099a7504c61164a0 ("arm: dma-mapping: Add
support to extend DMA IOMMU mappings").
Reported-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Hyungwon Hwang <human.hwang@samsung.com>
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
It's possible, albeit unlikely, that using the of_node here will
reference freed memory. Call of_node_put() after printing the
name to be safe.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
This patch is to get correct physical address of the reset function for
PAE systems, which use aliased physical memory for booting.
See the "ARM: mm: Introduce virt_to_idmap() with an arch hook" for details.
Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Fix misplaced check for HAVE_SYNC_COMPARE_AND_SWAP_SUPPORT in
the auxtrace code, which made 'perf record' fail straight away
in some architectures, even when auxtrace wasn't involved. (Adrian Hunter)
- Really allow to specify custom CC, AR or LD (Alexey Brodkin)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
It turns out to be rather tedious to test the NMI nesting code.
Make it easier: add a new CONFIG_DEBUG_ENTRY option that causes
the NMI handler to pre-emptively unmask NMIs.
With this option set, errors in the repeat_nmi logic or failures
to detect that we're in a nested NMI will result in quick panics
under perf (especially if multiple counters are running at high
frequency) instead of requiring an unusual workload that
generates page faults or breakpoints inside NMIs.
I called it CONFIG_DEBUG_ENTRY instead of CONFIG_DEBUG_NMI_ENTRY
because I want to add new non-NMI checks elsewhere in the entry
code in the future, and I'd rather not add too many new config
options or add this option and then immediately rename it.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Currently, "NMI executing" is one the first time an outermost
NMI hits repeat_nmi and zero thereafter. Change it to be zero
each time for consistency.
This is intended to help NMI handling fail harder if it's buggy.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Replace LEA; MOV with an equivalent SUB. This saves one
instruction.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
We have a tricky bug in the nested NMI code: if we see RSP
pointing to the NMI stack on NMI entry from kernel mode, we
assume that we are executing a nested NMI.
This isn't quite true. A malicious userspace program can point
RSP at the NMI stack, issue SYSCALL, and arrange for an NMI to
happen while RSP is still pointing at the NMI stack.
Fix it with a sneaky trick. Set DF in the region of code that
the RSP check is intended to detect. IRET will clear DF
atomically.
( Note: other than paravirt, there's little need for all this
complexity. We could check RIP instead of RSP. )
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Check the repeat_nmi .. end_repeat_nmi special case first. The
next patch will rework the RSP check and, as a side effect, the
RSP check will no longer detect repeat_nmi .. end_repeat_nmi, so
we'll need this ordering of the checks.
Note: this is more subtle than it appears. The check for
repeat_nmi .. end_repeat_nmi jumps straight out of the NMI code
instead of adjusting the "iret" frame to force a repeat. This
is necessary, because the code between repeat_nmi and
end_repeat_nmi sets "NMI executing" and then writes to the
"iret" frame itself. If a nested NMI comes in and modifies the
"iret" frame while repeat_nmi is also modifying it, we'll end up
with garbage. The old code got this right, as does the new
code, but the new code is a bit more explicit.
If we were to move the check right after the "NMI executing"
check, then we'd get it wrong and have random crashes.
( Because the "NMI executing" check would jump to the code that would
modify the "iret" frame without checking if the interrupted NMI was
currently modifying it. )
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
I found the nested NMI documentation to be difficult to follow.
Improve the comments.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Returning to userspace is tricky: IRET can fail, and ESPFIX can
rearrange the stack prior to IRET.
The NMI nesting fixup relies on a precise stack layout and
atomic IRET. Rather than trying to teach the NMI nesting fixup
to handle ESPFIX and failed IRET, punt: run NMIs that came from
user mode on the normal kernel stack.
This will make some nested NMIs visible to C code, but the C
code is okay with that.
As a side effect, this should speed up perf: it eliminates an
RDMSR when NMIs come from user mode.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Now that do_nmi saves CR2, we don't need to save it in asm.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
32-bit kernels handle nested NMIs in C. Enable the exact same
handling on 64-bit kernels as well. This isn't currently
necessary, but it will become necessary once the asm code starts
allowing limited nesting.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.
Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.
This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org # 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The resend mechanism happily calls the interrupt handler of interrupts
which are marked IRQ_NESTED_THREAD from softirq context. This can
result in crashes because the interrupt handler is not the proper way
to invoke the device handlers. They must be invoked via
handle_nested_irq.
Prevent the resend even if the interrupt has no valid parent irq
set. Its better to have a lost interrupt than a crashing machine.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
|
|
Calls to set_memory_wb() incure heavy TLB flush and IPI cost. To
minimize those wait until pool grow beyond batch size before
draining the pool.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-and-Tested-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Current code never allowed the page pool to actualy fill in anyway.
This fix it, so that we only start freeing page from the pool when
we go over the pool size.
Changed since v1:
- Move the page batching optimization to its separate patch.
Changed since v2:
- Do not remove code part of the batching optimization with
this patch.
- Better commit message.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These fix two bugs in the cpufreq core (including one recent
regression), fix a 4.0 PCI regression related to the ACPI resources
management and quieten an RCU-related lockdep complaint about a
tracepoint in the suspend-to-idle code.
Specifics:
- Fix a recently introduced issue in the cpufreq policy object
reinitialization that leads to CPU offline/online breakage (Viresh
Kumar)
- Make it possible to access frequency tables of offline CPUs which
is needed by thermal management code among other things (Viresh
Kumar)
- Fix an ACPI resource management regression introduced during the
4.0 cycle that may cause incorrect resource validation results to
appear in 32-bit x86 kernels due to silent truncation of 64-bit
values to 32-bit (Jiang Liu)
- Fix up an RCU-related lockdep complaint about suspicious RCU usage
in idle caused by using a suspend tracepoint in the core suspend-
to-idle code (Rafael J Wysocki)"
* tag 'pm+acpi-4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / PCI: Fix regressions caused by resource_size_t overflow with 32-bit kernel
cpufreq: Allow freq_table to be obtained for offline CPUs
cpufreq: Initialize the governor again while restoring policy
suspend-to-idle: Prevent RCU from complaining about tick_freeze()
|
|
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver fixes from Darren Hart:
"Fix SMBIOS call handling and hwswitch state coherency in the
dell-laptop driver. Cleanups for intel_*_ipc drivers. Details:
dell-laptop:
- Do not cache hwswitch state
- Check return value of each SMBIOS call
- Clear buffer before each SMBIOS call
intel_scu_ipc:
- Move local memory initialization out of a mutex
intel_pmc_ipc:
- Update kerneldoc formatting
- Fix compiler casting warnings"
* tag 'platform-drivers-x86-v4.2-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
intel_scu_ipc: move local memory initialization out of a mutex
intel_pmc_ipc: Update kerneldoc formatting
dell-laptop: Do not cache hwswitch state
dell-laptop: Check return value of each SMBIOS call
dell-laptop: Clear buffer before each SMBIOS call
intel_pmc_ipc: Fix compiler casting warnings
|
