summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-09-08RDS/IB: eliminate duplicate codeAndy Grover
both atomics and rdmas need to convert ib-specific completion codes into RDS status codes. Rename rds_ib_rdma_send_complete to rds_ib_send_complete, and have it take a pointer to the function to call with the new error code. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08RDS: inc_purge() transport function unused - remove itAndy Grover
Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08RDS: WhitespaceAndy Grover
Tidy up some whitespace issues. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08RDS: Do not mask address when pinning pagesAndy Grover
This does not appear to be necessary. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08RDS: Base init_depth and responder_resources on hw valuesAndy Grover
Instead of using a constant for initiator_depth and responder_resources, read the per-QP values when the device is enumerated, and then use these values when creating the connection. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08RDS: Implement atomic operationsAndy Grover
Implement a CMSG-based interface to do FADD and CSWP ops. Alter send routines to handle atomic ops. Add atomic counters to stats. Add xmit_atomic() to struct rds_transport Inline rds_ib_send_unmap_rdma into unmap_rm Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08RDS: Clear up some confusing code in send_remove_from_sockAndy Grover
The previous code was correct, but made the assumption that if r_notifier was non-NULL then either r_recverr or r_notify was true. Valid, but fragile. Changed to explicitly check r_recverr (shows up in greps for recverr now, too.) Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08RDS: make sure all sgs alloced are initializedAndy Grover
rds_message_alloc_sgs() now returns correctly-initialized sg lists, so calleds need not do this themselves. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08RDS: make m_rdma_op a member of rds_messageAndy Grover
This eliminates a separate memory alloc, although it is now necessary to add an "r_active" flag, since it is no longer to use the m_rdma_op pointer as an indicator of if an rdma op is present. rdma SGs allocated from rm sg pool. rds_rm_size also gets bigger. It's a little inefficient to run through CMSGs twice, but it makes later steps a lot smoother. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08RDS: fold rdma.h into rds.hAndy Grover
RDMA is now an intrinsic part of RDS, so it's easier to just have a single header. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08RDS: Explicitly allocate rm in sendmsg()Andy Grover
r_m_copy_from_user used to allocate the rm as well as kernel buffers for the data, and then copy the data in. Now, sendmsg() allocates the rm, although the data buffer alloc still happens in r_m_copy_from_user. SGs are still allocated with rm, but now r_m_alloc_sgs() is used to reserve them. This allows multiple SG lists to be allocated from the one rm -- this is important once we also want to alloc our rdma sgl from this pool. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08RDS: cleanup/fix rds_rdma_unuseAndy Grover
First, it looks to me like the atomic_inc is wrong. We should be decrementing refcount only once here, no? It's already being done by the mr_put() at the end. Second, simplify the logic a bit by bailing early (with a warning) if !mr. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08RDS: break out rdma and data ops into nested structs in rds_messageAndy Grover
Clearly separate rdma-related variables in rm from data-related ones. This is in anticipation of adding atomic support. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08RDS: cleanup: remove "== NULL"s and "!= NULL"s in ptr comparisonsAndy Grover
Favor "if (foo)" style over "if (foo != NULL)". Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08RDS: move rds_shutdown_worker impl. to rds_conn_shutdownAndy Grover
This fits better in connection.c, rather than threads.c. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08RDS: Fix locking in send on m_rs_lockAndy Grover
Do not nest m_rs_lock under c_lock Disable interrupts in {rdma,atomic}_send_complete Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08RDS: Rewrite rds_send_drop_to() for clarityAndy Grover
This function has been the source of numerous bugs; it's just too complicated. Simplified to nest spinlocks cleanly within the second loop body, and kick out early if there are no rms to drop. This will be a little slower because conn lock is grabbed for each entry instead of "caching" the lock across rms, but this should be entirely irrelevant to fastpath performance. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08RDS: Fix corrupted rds_mrsTina Yang
On second look at this bug (OFED #2002), it seems that the collision is not with the retransmission queue (packet acked by the peer), but with the local send completion. A theoretical sequence of events (from time t0 to t3) is thought to be as follows, Thread #1 t0: sock_release rds_release rds_send_drop_to /* wait on send completion */ t2: rds_rdma_drop_keys() /* destroy & free all mrs */ Thread #2 t1: rds_ib_send_cq_comp_handler rds_ib_send_unmap_rm rds_message_unmapped /* wake up #1 @ t0 */ t3: rds_message_put rds_message_purge rds_mr_put /* memory corruption detected */ The problem with the rds_rdma_drop_keys() is it could remove a mr's refcount more than its due (i.e. repeatedly as long as it still remains in the tree (mr->r_refcount > 0)). Theoretically it should remove only one reference - reference by the tree. /* Release any MRs associated with this socket */ while ((node = rb_first(&rs->rs_rdma_keys))) { mr = container_of(node, struct rds_mr, r_rb_node); if (mr->r_trans == rs->rs_transport) mr->r_invalidate = 0; rds_mr_put(mr); } I think the correct way of doing it is to remove the mr from the tree and rds_destroy_mr it first, then a rds_mr_put() to decrement its reference count by one. Whichever thread holds the last reference will free the mr via rds_mr_put(). Signed-off-by: Tina Yang <tina.yang@oracle.com> Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08RDS: Fix BUG_ONs to not fire when in a taskletAndy Grover
in_interrupt() is true in softirqs. The BUG_ONs are supposed to check for if irqs are disabled, so we should use BUG_ON(irqs_disabled()) instead, duh. Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-06net: poll() optimizationsEric Dumazet
No need to test twice sk->sk_shutdown & RCV_SHUTDOWN Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06mlx4_en: Fixed Ethtool statistics reportYevgeny Petrilin
The values didn't match the title after removing the LRO statistics in commit fa37a9586f92051de03a13e55e5ec3880bb6783e Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06mlx4_en: Consider napi_get_frags() failure.Yevgeny Petrilin
If failed to get skb frags using napi_get_frags(), the packet is dropped. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06net/caifcaif_dev.c: Use netdev_<level>Joe Perches
Convert pr_<level>("%s" ..., (struct netdev *)->name ...) to netdev_<level>((struct netdev *), ...) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06net/caif: Use pr_fmtJoe Perches
This patch standardizes caif message logging prefixes. Add #define pr_fmt(fmt) KBUILD_MODNAME ":%s(): " fmt, __func__ Add missing "\n"s to some logging messages Convert pr_warning to pr_warn This changes the logging message prefix from CAIF: to caif: for all uses but caif_socket.c and chnl_net.c. Those now use their filename without extension. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06drivers/atm/firestream.c: Fix unsigned return typeJulia Lawall
The function has an unsigned return type, but returns a negative constant to indicate an error condition. The result of calling the function is always stored in a variable of type (signed) int, and thus unsigned can be dropped from the return type. A sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ identifier f; constant C; @@ unsigned f(...) { <+... * return -C; ...+> } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06net/9p/trans_fd.c: Fix unsigned return typeJulia Lawall
The function has an unsigned return type, but returns a negative constant to indicate an error condition. The result of calling the function is always stored in a variable of type (signed) int, and thus unsigned can be dropped from the return type. A sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ identifier f; constant C; @@ unsigned f(...) { <+... * return -C; ...+> } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06drivers/net: Removing undead ifdef CHELSIO_T1_1GChristian Dietrich
The CHELSIO_T1_1G ifdef isn't necessary at this point, because it is checked in an outer ifdef level already and has no effect here. Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06drivers/net/jme: Use pr_<level>Joe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Convert jeprintk to pr_err Remove jeprintk macro define Remove periods from end of logging messages Coalesce format strings Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06isdn: cleanup: make buffer smallerDan Carpenter
This showed up in my audit because we use strcpy() to copy "ds" into a 32 character buffer inside the isdn_tty_dial() function. But it turns out that we only ever use the first 32 characters so it's OK. I have changed the declaration to make the static checkers happy. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06isdn: potential buffer overflowsDan Carpenter
cs->ics.parm.setup.phone is a 32 character array. In each of these cases we're copying from a 35 character array into a 32 character array so we should use strlcpy() instead of strcpy(). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06NET: bna, fix lock imbalanceJiri Slaby
bnad_set_rx_mode omit to unlock bna_lock on one fail path. Fix that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Debashis Dutt <ddutt@brocade.com> Cc: Rasesh Mody <rmody@brocade.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06drivers/net/fs_enet/fs_enet-main.c: Add of_node_put to avoid memory leakJulia Lawall
In this case, a device_node structure is stored in another structure that is then freed without first decrementing the reference count of the device_node structure. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression x; identifier f; position p1,p2; @@ x@p1->f = \(of_find_node_by_path\|of_find_node_by_name\|of_find_node_by_phandle\|of_get_parent\|of_get_next_parent\|of_get_next_child\|of_find_compatible_node\|of_match_node\|of_find_node_by_type\|of_find_node_with_property\|of_find_matching_node\|of_parse_phandle\|of_node_get\)(...); ... when != of_node_put(x) kfree@p2(x) @script:python@ p1 << r.p1; p2 << r.p2; @@ cocci.print_main("call",p1) cocci.print_secs("free",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06net: pskb_expand_head() optimizationEric Dumazet
pskb_expand_head() blindly takes references on fragments before calling skb_release_data(), potentially releasing these references. We can add a fast path, avoiding these atomic operations, if we own the last reference on skb->head. Based on a previous patch from David Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Update module information and versionSantiago Leon
Add an entry to the MAINTAINERS file for ibmveth, clean up the copyright and add all authors. Change the name of the module to reflect the product name over the last number of years. Considering all the changes we have made, bump the driver version. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Remove some unnecessary include filesSantiago Leon
These files probably came across from the skeleton driver. Remove them. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Convert driver specific assert to BUG_ONSantiago Leon
We had a driver specific assert function which wasn't enabled most of the time. Convert them to BUG_ON and enable them all the time. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Return -EINVAL on all ->probe errorsSantiago Leon
We had a few cases where we returned success on error. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Coding style fixesSantiago Leon
Fix most of the kernel coding style issues in ibmveth. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Some formatting fixesSantiago Leon
IbmVethNumBufferPools -> IBMVETH_NUM_BUFF_POOLS Also change IBMVETH_MAX_MTU -> IBMVETH_MIN_MTU, it refers to the minimum size not the maximum. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Convert driver specific error functions to netdev_errSantiago Leon
Use netdev_err to standardise the error output. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Convert driver specific debug to netdev_dbgSantiago Leon
Use netdev_dbg to standardise the debug output. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Remove redundant function prototypesSantiago Leon
These functions appear before their use, so we can remove the redundant prototypes. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Convert to netdev_alloc_skbSantiago Leon
We were using alloc_skb which doesn't create any headroom. Change it to use netdev_alloc_skb to match most other drivers. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: remove procfs codeSantiago Leon
We export all the driver specific statistics via ethtool, so there is no need to duplicate this in procfs. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Enable IPv6 checksum offloadSantiago Leon
This patch enables TCP checksum offload support for IPv6 on ibmveth. This completely eliminates the generation and checking of the checksum for IPv6 packets that are completely virtual and never touch a physical network. A basic TCPIPV6_STREAM netperf run showed a ~30% throughput improvement when an MTU of 64000 was used. This featured is enabled by default, as is the case for IPv4 checksum offload. When checksum offload is enabled the driver will negotiate IPv4 and IPv6 offload with the firmware separately and enable what is available. As long as either IPv4 or IPv6 offload is supported and enabled the device will report that checksum offload is enabled. The device stats, available through ethtool, will display which checksum offload features are supported/enabled by firmware. Performance testing against a stock kernel shows no regression for IPv4 or IPv6 in terms of throughput or processor utilization with checksum disabled or enabled. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Remove duplicate checksum offload setup codeSantiago Leon
Remove code in the device probe function where we set up the checksum offload feature and replace it with a call to an existing function that is doing the same. This is done to clean up the driver in preparation of adding IPv6 checksum offload support. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Add optional flush of rx bufferSantiago Leon
On some machines we can improve the bandwidth by ensuring rx buffers are not in the cache. Add a module option that is disabled by default that flushes rx buffers on insertion. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Add scatter-gather supportSantiago Leon
ibmveth can scatter gather up to 6 segments. If we go over this then we have no option but to call skb_linearize, like other drivers with similar limitations do. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Use lighter weight read memory barrier in ibmveth_pollAnton Blanchard
We want to order the read in ibmveth_rxq_pending_buffer and the read of ibmveth_rxq_buffer_valid which are both cacheable memory. smp_rmb() is good enough for this. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06ibmveth: Add rx_copybreakSantiago Leon
For small packets, create a new skb and copy the packet into it so we avoid tearing down and creating a TCE entry. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Santiago Leon <santil@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-26 23:27:18 +0000