summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2016-04-06mac80211: move semicolon out of CALL_RXH macroJohannes Berg
Move the semicolon, people typically assume that and once line already put a semicolon behind the "call". Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: count MSDUs in A-MSDU properlyJohannes Berg
For the RX MSDU statistics, we need to count the number of MSDUs created and accepted from an A-MSDU. Right now, all frames in any A-MSDUs were completely ignored. Fix this by moving the RX MSDU statistics accounting into the deliver function. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: allow passing transmitter station on RXJohannes Berg
Sometimes drivers already looked up, or know out-of-band from their device, which station transmitted a given RX frame. Allow them to pass the station pointer to mac80211 to save the extra lookup. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: flush paths outside of plink lockBob Copeland
Lockdep warned of a lock dependency between the mesh_plink lock and the internal lock for the rhashtable. The problem is that the rhashtable code uses a spin lock with softirqs enabled, while mesh_plink_timer executes a walk (to flush paths on a state change) inside a softirq with the plink lock held. This leads to the following deadlock if the timer fires while rht lock is held on this CPU, and plink lock is held on another CPU: CPU0 CPU1 ---- ---- lock(&(&ht->lock)->rlock); local_irq_disable(); lock(&(&sta->mesh->plink_lock)->rlock); lock(&(&ht->lock)->rlock); <Interrupt> lock(&(&sta->mesh->plink_lock)->rlock); *** DEADLOCK *** Fix by waiting until we drop the plink lock to flush paths. Fixes: d48a1b7cd439 ("mac80211: mesh: convert path table to rhashtable") Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: fix cleanup for mesh pathtableBob Copeland
The mesh path table needs to be around for the entire time the interface is in mesh mode, as users can perform an mpath dump at any time. The existing path table lifetime is instead tied to the mesh BSS which can cause crashes when different MBSSes are joined in the context of a single interface, or when the path table is dumped when no MBSS is joined. Introduce a new function to perform the final teardown of the interface and perform path table cleanup there. We already free the individual path elements when the leaving the mesh so no additional cleanup is needed there. This fixes the following crash: [ 47.753026] BUG: unable to handle kernel paging request at fffffff0 [ 47.753026] IP: [<c0239765>] kthread_data+0xa/0xe [ 47.753026] *pde = 00741067 *pte = 00000000 [ 47.753026] Oops: 0000 [#4] PREEMPT [ 47.753026] Modules linked in: ppp_generic slhc 8021q garp mrp sch_fq_codel iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat ip_tables ath9k_htc ath5k 8139too ath10k_pci ath10k_core arc4 ath9k ath9k_common ath9k_hw mac80211 ath cfg80211 cpufreq_powersave br_netfilter bridge stp llc ipw usb_wwan sierra_net usbnet af_alg natsemi via_rhine mii iTCO_wdt iTCO_vendor_support gpio_ich sierra coretemp pcspkr i2c_i801 lpc_ich ata_generic ata_piix libata ide_pci_generic piix e1000e igb i2c_algo_bit ptp pps_core [last unloaded: 8139too] [ 47.753026] CPU: 0 PID: 12 Comm: kworker/u2:1 Tainted: G D W 4.5.0-wt-V3 #6 [ 47.753026] Hardware name: To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080016 11/07/2014 [ 47.753026] task: f645a0c0 ti: f6462000 task.ti: f6462000 [ 47.753026] EIP: 0060:[<c0239765>] EFLAGS: 00010002 CPU: 0 [ 47.753026] EIP is at kthread_data+0xa/0xe [ 47.753026] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000000 [ 47.753026] ESI: f645a0c0 EDI: f645a2fc EBP: f6463a80 ESP: f6463a78 [ 47.753026] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 [ 47.753026] CR0: 8005003b CR2: 00000014 CR3: 353e5000 CR4: 00000690 [ 47.753026] Stack: [ 47.753026] c0236866 00000000 f6463aac c05768b4 00000009 f6463ba8 f6463ab0 c0247010 [ 47.753026] 00000000 f645a0c0 f6464000 00000009 f6463ba8 f6463ab8 c0576eb2 f645a0c0 [ 47.753026] f6463aec c0228be4 c06335a4 f6463adc f6463ad0 c06c06d4 f6463ae4 c02471b0 [ 47.753026] Call Trace: [ 47.753026] [<c0236866>] ? wq_worker_sleeping+0xb/0x78 [ 47.753026] [<c05768b4>] __schedule+0xda/0x587 [ 47.753026] [<c0247010>] ? vprintk_default+0x12/0x14 [ 47.753026] [<c0576eb2>] schedule+0x72/0x89 [ 47.753026] [<c0228be4>] do_exit+0xb8/0x71d [ 47.753026] [<c02471b0>] ? kmsg_dump+0xa9/0xae [ 47.753026] [<c0203576>] oops_end+0x69/0x70 [ 47.753026] [<c021dcdb>] no_context+0x1bb/0x1c5 [ 47.753026] [<c021de1b>] __bad_area_nosemaphore+0x136/0x140 [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c021de32>] bad_area_nosemaphore+0xd/0x10 [ 47.753026] [<c021e0a1>] __do_page_fault+0x26c/0x320 [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c021e2fa>] do_page_fault+0xb/0xd [ 47.753026] [<c05798f8>] error_code+0x58/0x60 [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c0239765>] ? kthread_data+0xa/0xe [ 47.753026] [<c0236866>] ? wq_worker_sleeping+0xb/0x78 [ 47.753026] [<c05768b4>] __schedule+0xda/0x587 [ 47.753026] [<c0247010>] ? vprintk_default+0x12/0x14 [ 47.753026] [<c0576eb2>] schedule+0x72/0x89 [ 47.753026] [<c0228be4>] do_exit+0xb8/0x71d [ 47.753026] [<c02471b0>] ? kmsg_dump+0xa9/0xae [ 47.753026] [<c0203576>] oops_end+0x69/0x70 [ 47.753026] [<c021dcdb>] no_context+0x1bb/0x1c5 [ 47.753026] [<c021de1b>] __bad_area_nosemaphore+0x136/0x140 [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c021de32>] bad_area_nosemaphore+0xd/0x10 [ 47.753026] [<c021e0a1>] __do_page_fault+0x26c/0x320 [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c021e2fa>] do_page_fault+0xb/0xd [ 47.753026] [<c05798f8>] error_code+0x58/0x60 [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c0239765>] ? kthread_data+0xa/0xe [ 47.753026] [<c0236866>] ? wq_worker_sleeping+0xb/0x78 [ 47.753026] [<c05768b4>] __schedule+0xda/0x587 [ 47.753026] [<c0391e32>] ? put_io_context_active+0x6d/0x95 [ 47.753026] [<c0576eb2>] schedule+0x72/0x89 [ 47.753026] [<c02291f8>] do_exit+0x6cc/0x71d [ 47.753026] [<c0203576>] oops_end+0x69/0x70 [ 47.753026] [<c021dcdb>] no_context+0x1bb/0x1c5 [ 47.753026] [<c021de1b>] __bad_area_nosemaphore+0x136/0x140 [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c021de32>] bad_area_nosemaphore+0xd/0x10 [ 47.753026] [<c021e0a1>] __do_page_fault+0x26c/0x320 [ 47.753026] [<c03b9160>] ? debug_smp_processor_id+0x12/0x16 [ 47.753026] [<c02015e2>] ? __switch_to+0x24/0x40e [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c021e2fa>] do_page_fault+0xb/0xd [ 47.753026] [<c05798f8>] error_code+0x58/0x60 [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c03b59d2>] ? rhashtable_walk_init+0x5c/0x93 [ 47.753026] [<f9843221>] mesh_path_tbl_expire.isra.24+0x19/0x82 [mac80211] [ 47.753026] [<f984408b>] mesh_path_expire+0x11/0x1f [mac80211] [ 47.753026] [<f9842bb7>] ieee80211_mesh_work+0x73/0x1a9 [mac80211] [ 47.753026] [<f98207d1>] ieee80211_iface_work+0x2ff/0x311 [mac80211] [ 47.753026] [<c0235fa3>] process_one_work+0x14b/0x24e [ 47.753026] [<c0236313>] worker_thread+0x249/0x343 [ 47.753026] [<c02360ca>] ? process_scheduled_works+0x24/0x24 [ 47.753026] [<c0239359>] kthread+0x9e/0xa3 [ 47.753026] [<c0578e50>] ret_from_kernel_thread+0x20/0x40 [ 47.753026] [<c02392bb>] ? kthread_parkme+0x18/0x18 [ 47.753026] Code: 6b c0 85 c0 75 05 e8 fb 74 fc ff 89 f8 84 c0 75 08 8d 45 e8 e8 34 dd 33 00 83 c4 28 5b 5e 5f 5d c3 55 8b 80 10 02 00 00 89 e5 5d <8b> 40 f0 c3 55 b9 04 00 00 00 89 e5 52 8b 90 10 02 00 00 8d 45 [ 47.753026] EIP: [<c0239765>] kthread_data+0xa/0xe SS:ESP 0068:f6463a78 [ 47.753026] CR2: 00000000fffffff0 [ 47.753026] ---[ end trace 867ca0bdd0767790 ]--- Fixes: 3b302ada7f0a ("mac80211: mesh: move path tables into if_mesh") Reported-by: Fred Veldini <fred.veldini@gmail.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: fix mesh path kerneldocBob Copeland
Several of the mesh path fields are undocumented and some of the documentation is no longer correct or relevant after the switch to rhashtable. Clean up the kernel doc accordingly and reorder some fields to match the structure layout. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: reorder structure membersBob Copeland
Reduce padding waste in struct mesh_table and struct rmc_entry by moving the smaller fields to the end. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: embed gates hlist head directlyBob Copeland
Since we have converted the mesh path tables to rhashtable, we are no longer swapping out the entire mesh_pathtbl pointer with RCU. As a result, we no longer need indirection to the hlist head for the gates list and can simply embed it, saving a pair of pointer-sized allocations. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: use hlist for rmc cacheBob Copeland
The RMC cache has 256 list heads plus a u32, which puts it at the unfortunate size of 4104 bytes with padding. kmalloc() will then round this up to the next power-of-two, so we wind up actually using two pages here where most of the second is wasted. Switch to hlist heads here to reduce the structure size down to fit within a page. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: handle failed alloc for rmc cacheBob Copeland
In the unlikely case that mesh_rmc_init() fails with -ENOMEM, the rmc pointer will be left as NULL but the interface is still operational because ieee80211_mesh_init_sdata() is not allowed to fail. If this happens, we would blindly dereference rmc when checking whether a multicast frame is in the cache. Instead just drop the frames in the forwarding path. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: fix crash in mesh_path_timerBob Copeland
The mesh_path_reclaim() function, called from an rcu callback, cancels the mesh_path_timer associated with a mesh path. Unfortunately, this call can happen much later, perhaps after the hash table itself is destroyed. Such a situation led to the following crash in mesh_path_send_to_gates() when dereferencing the tbl pointer: [ 23.901661] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 23.905516] IP: [<ffffffff814c910b>] mesh_path_send_to_gates+0x2b/0x740 [ 23.908757] PGD 99ca067 PUD 99c4067 PMD 0 [ 23.910789] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [ 23.913485] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc6-wt+ #43 [ 23.916675] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014 [ 23.920471] task: ffffffff81685500 ti: ffffffff81678000 task.ti: ffffffff81678000 [ 23.922619] RIP: 0010:[<ffffffff814c910b>] [<ffffffff814c910b>] mesh_path_send_to_gates+0x2b/0x740 [ 23.925237] RSP: 0018:ffff88000b403d30 EFLAGS: 00010286 [ 23.926739] RAX: 0000000000000000 RBX: ffff880009bc0d20 RCX: 0000000000000102 [ 23.928796] RDX: 000000000000002e RSI: 0000000000000001 RDI: ffff880009bc0d20 [ 23.930895] RBP: ffff88000b403e18 R08: 0000000000000001 R09: 0000000000000001 [ 23.932917] R10: 0000000000000000 R11: 0000000000000001 R12: ffff880009c20940 [ 23.936370] R13: ffff880009bc0e70 R14: ffff880009c21c40 R15: ffff880009bc0d20 [ 23.939823] FS: 0000000000000000(0000) GS:ffff88000b400000(0000) knlGS:0000000000000000 [ 23.943688] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 23.946429] CR2: 0000000000000008 CR3: 00000000099c5000 CR4: 00000000000006b0 [ 23.949861] Stack: [ 23.950840] 000000000000002e ffff880009c20940 ffff88000b403da8 ffffffff8109e551 [ 23.954467] ffffffff82711be2 000000000000002e 0000000000000000 ffffffff8166a5f5 [ 23.958141] 0000000000685ce8 0000000000000246 ffff880009bc0d20 ffff880009c20940 [ 23.961801] Call Trace: [ 23.962987] <IRQ> [ 23.963963] [<ffffffff8109e551>] ? vprintk_emit+0x351/0x5e0 [ 23.966782] [<ffffffff8109e8ff>] ? vprintk_default+0x1f/0x30 [ 23.969529] [<ffffffff810ffa41>] ? printk+0x48/0x50 [ 23.971956] [<ffffffff814ceef3>] mesh_path_timer+0x133/0x160 [ 23.974707] [<ffffffff814cedc0>] ? mesh_nexthop_resolve+0x230/0x230 [ 23.977775] [<ffffffff810b04ee>] call_timer_fn+0xce/0x330 [ 23.980448] [<ffffffff810b0425>] ? call_timer_fn+0x5/0x330 [ 23.983126] [<ffffffff814cedc0>] ? mesh_nexthop_resolve+0x230/0x230 [ 23.986091] [<ffffffff810b097c>] run_timer_softirq+0x22c/0x390 Instead of cancelling in the RCU callback, set a new flag to prevent the timer from being rearmed, and then cancel the timer synchronously when freeing the mesh path. This leaves mesh_path_reclaim() doing nothing but kfree, so switch to kfree_rcu(). Fixes: 3b302ada7f0a ("mac80211: mesh: move path tables into if_mesh") Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: track and tell driver about GO client P2P PS abilitiesAyala Beker
Legacy clients don't support P2P power save mechanism, and thus if a P2P GO has a legacy client connected to it, it should disable P2P PS mechanisms. Let the driver know about this with a new bss_conf parameter. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05cfg80211: allow userspace to specify client P2P PS supportAyala Beker
Legacy clients don't support P2P power save mechanisms, and thus if a P2P GO has a legacy client connected to it, it has to make some changes in the PS behavior. To handle this, add an attribute to specify whether a station supports P2P PS or not. If the attribute was not specified cfg80211 will assume that station supports it for P2P GO interface, and does NOT support it for AP interface, matching the current assumptions in the code. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: avoid useless memory write on each frame RXJohannes Berg
In the likely case that probe_count is 0, don't write to the memory there. Also use ifmgd consistently in the function, instead of using sdata->u.mgd as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: fix cipher scheme function nameJohannes Berg
The code is only used with iwlwifi, but still should have proper mac80211 naming scheme; fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: clean up station flags debugfsJohannes Berg
Avoid the really strange %s%s%s expression, use an array of flag names and check that all flags are present. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05ieee80211: support parsing Fine Timing Measurement action frameAvraham Stern
Add definition for Fine Timing Measurement (FTM) frame format as defined in IEEE802.11-REVmcD5.0 section 9.6.8.33 Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: don't start dynamic PS timer if not neededJohannes Berg
If the device implements dynamic PS itself, there's no need to ever start the dynamic powersave timer on RX. While at it, fix up some indentation in this code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: remove sta_info debugfs sub-structJohannes Berg
Since the previous patch, the struct only has a single member, so remove the struct and leave just the single member. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: Remove unused variable in per STA debugfs structMohammed Shafi Shajakhan
Remove unused variable in per STA debugfs structure, 'commit 34e895075e21 ("mac80211: allow station add/remove to sleep")' removed the only user of 'add_has_run'. Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: enable starting BA session with custom timeoutSara Sharon
Currently the debugfs entry for starting aggregation session starts it with timeout of 5 seconds. Allow opening a session with a custom timeout (according to spec 0 is no timeout). while at it, refactor the function and remove the magic numbers. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: add NETIF_F_RXCSUM to features white listSara Sharon
NETIF_F_RXCSUM is not in the white list, though some drivers may want to set it in order to enable seeing the actual RX checksum status in ethtool. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: Set global RRM capabilityEmmanuel Grumbach
Allow publishing RRM capabilities for features that are not HW dependent. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05cfg80211: fix kernel-doc struct nameAkira Moroo
This patch fix a structure name mismatch in cfg80211.h. Signed-off-by: Moroo Akira <retrage01@gmail.com> Reviewed-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: minstrel_ht: improve sample rate skip logicFelix Fietkau
There were a few issues that were slowing down the process of finding the optimal rate, especially on devices with multi-rate retry limitations: When max_tp_rate[0] was slower than max_tp_rate[1], the code did not sample max_tp_rate[1], which would often allow it to switch places with max_tp_rate[0] (e.g. if only the first sampling attempts were bad, but the rate is otherwise good). Also, sample attempts of rates between max_tp_rate[0] and [1] were being ignored in this case, because the code only checked if the rate was slower than [1]. Fix this by checking against the fastest / second fastest max_tp_rate instead of assuming a specific order between the two. In my tests this patch significantly reduces the time until minstrel_ht finds the optimal rate right after assoc Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: do not pass injected frames without a valid rate to the driverFelix Fietkau
Fall back to rate control if the requested bitrate was not found. Fixes: dfdfc2beb0dd ("mac80211: Parse legacy and HT rate in injected frames") Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: fix parsing of 40Mhz in injected radiotap headerSven Eckelmann
The MCS bandwidth part of the radiotap header is 2 bits wide. The full 2 bit have to compared against IEEE80211_RADIOTAP_MCS_BW_40 and not only if the first bit is set. Otherwise IEEE80211_RADIOTAP_MCS_BW_40 can be confused with IEEE80211_RADIOTAP_MCS_BW_20U. Fixes: dfdfc2beb0dd ("mac80211: Parse legacy and HT rate in injected frames") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05nl80211: add feature for BSS selection supportArend van Spriel
Introducing a new feature that the driver can use to indicate the driver/firmware supports configuration of BSS selection criteria upon CONNECT command. This can be useful when multiple BSS-es are found belonging to the same ESS, ie. Infra-BSS with same SSID. The criteria can then be used to offload selection of a preferred BSS. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Lei Zhang <leizh@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> [move wiphy support check into parse_bss_select()] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: synchronize driver rx queues before removing a stationSara Sharon
Some devices, like iwlwifi, have RSS queues. This may cause a situation where a disassociation is handled in control path and results in station removal while there are prior RX frames that were still not processed in other queues. When they will be processed the station will be gone, and the frames will be dropped. Add a synchronization interface to avoid that. When driver returns from the synchronization mac80211 may remove the station. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: convert path table to rhashtableBob Copeland
In the time since the mesh path table was implemented as an RCU-traversable, dynamically growing hash table, a generic RCU hashtable implementation was added to the kernel. Switch the mesh path table over to rhashtable to remove some code and also gain some features like automatic shrinking. Cc: Thomas Graf <tgraf@suug.ch> Cc: netdev@vger.kernel.org Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05rhashtable: accept GFP flags in rhashtable_walk_initBob Copeland
In certain cases, the 802.11 mesh pathtable code wants to iterate over all of the entries in the forwarding table from the receive path, which is inside an RCU read-side critical section. Enable walks inside atomic sections by allowing GFP_ATOMIC allocations for the walker state. Change all existing callsites to pass in GFP_KERNEL. Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Bob Copeland <me@bobcopeland.com> [also adjust gfs2/glock.c and rhashtable tests] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: embed known gates list in struct mesh_pathBob Copeland
The mesh path table uses a struct mesh_node in its hlists in order to support a resizable hash table: the mesh_node provides an indirection to the actual mesh path so that two different bucket lists can point to the same path entry. However, for the known gates list, we don't need this indirection because there is ever only one list. So we can just embed the hlist_node in the mesh path itself, which simplifies things a bit and saves a linear search whenever we need to find an item in the list. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: factor out common mesh path allocation codeBob Copeland
Remove duplicate code to allocate and initialize a mesh path or mesh proxy path. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: don't hash sdata in mpath tablesBob Copeland
Now that the sdata pointer is the same for all entries of a path table, hashing it is pointless, so hash only the address. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: move path tables into if_meshBob Copeland
The mesh path and mesh gate hashtables are global, containing all of the mpaths for every mesh interface, but the paths are all tied logically to a single interface. The common case is just a single mesh interface, so optimize for that by moving the global hashtable into the per-interface struct. Doing so allows us to drop sdata pointer comparisons inside the lookups and also saves a few bytes of BSS and data. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211_hwsim: Support a hw scan request for a specific BSSIDJouni Malinen
If the hw scan request specifies a single BSSID, use that value instead of the wildcard BSSID in the Probe Request frames. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: Support a scan request for a specific BSSIDJouni Malinen
If the cfg80211 scan trigger operation specifies a single BSSID, use that value instead of the wildcard BSSID in the Probe Request frames. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05cfg80211: Allow a scan request for a specific BSSIDJouni Malinen
This allows scans for a specific BSSID to be optimized by the user space application by requesting the driver to set the Probe Request frame BSSID field (Address 3) to the specified BSSID instead of the wildcard BSSID. This prevents other APs from replying which reduces airtime need and latency in getting the response from the target AP through. This is an optimization and as such, it is acceptable for some of the drivers not to support the mechanism. If not supported, the wildcard BSSID will be used and more responses may be received. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: document only injected *_RADIOTAP_* flagsSven Eckelmann
Not the internal flags but the radiotap flags are parsed when the monitor injected frames are prepared for transmission. Thus the documentation should only document these. Reported-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Reported-by: Johannes Berg <johannes@sipsolutions.net> Fixes: dfdfc2beb0dd ("mac80211: Parse legacy and HT rate in injected frames") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: allow not sending MIC up from driver for HW cryptoSara Sharon
When HW crypto is used, there's no need for the CCMP/GCMP MIC to be available to mac80211, and the hardware might have removed it already after checking. The MIC is also useless to have when the frame is already decrypted, so allow indicating that it's not present. Since we are running out of bits in mac80211_rx_flags, make the flags field a u64. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: allow drivers to report CLOCK_BOOTTIME for scan resultsJohannes Berg
This was requested by Android, and the appropriate cfg80211 API had been added by Dmitry. Support it in mac80211, allowing drivers to provide the timestamp. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: parse VHT info in injected framesLorenzo Bianconi
Add VHT radiotap parsing support to ieee80211_parse_tx_radiotap(). That capability has been tested using a d-link dir-860l rev b1 running OpenWrt trunk and mt76 driver Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05rfkill: Use switch to demux userspace operationsJoão Paulo Rechi Vita
Using a switch to handle different ev.op values in rfkill_fop_write() makes the code easier to extend, as out-of-range values can always be handled by the default case. Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> [roll in fix for RFKILL_OP_CHANGE from Jouni] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05wext: unregister_pernet_subsys() on notifier registration failureJohannes Berg
If register_netdevice_notifier() fails (which in practice it can't right now), we should call unregister_pernet_subsys(). Do that. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Missing device reference in IPSEC input path results in crashes during device unregistration. From Subash Abhinov Kasiviswanathan. 2) Per-queue ISR register writes not being done properly in macb driver, from Cyrille Pitchen. 3) Stats accounting bugs in bcmgenet, from Patri Gynther. 4) Lightweight tunnel's TTL and TOS were swapped in netlink dumps, from Quentin Armitage. 5) SXGBE driver has off-by-one in probe error paths, from Rasmus Villemoes. 6) Fix race in save/swap/delete options in netfilter ipset, from Vishwanath Pai. 7) Ageing time of bridge not set properly when not operating over a switchdev device. Fix from Haishuang Yan. 8) Fix GRO regression wrt nested FOU/GUE based tunnels, from Alexander Duyck. 9) IPV6 UDP code bumps wrong stats, from Eric Dumazet. 10) FEC driver should only access registers that actually exist on the given chipset, fix from Fabio Estevam. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits) net: mvneta: fix changing MTU when using per-cpu processing stmmac: fix MDIO settings Revert "stmmac: Fix 'eth0: No PHY found' regression" stmmac: fix TX normal DESC net: mvneta: use cache_line_size() to get cacheline size net: mvpp2: use cache_line_size() to get cacheline size net: mvpp2: fix maybe-uninitialized warning tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filter net: usb: cdc_ncm: adding Telit LE910 V2 mobile broadband card rtnl: fix msg size calculation in if_nlmsg_size() fec: Do not access unexisting register in Coldfire net: mvneta: replace MVNETA_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES net: mvpp2: replace MVPP2_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES net: dsa: mv88e6xxx: Clear the PDOWN bit on setup net: dsa: mv88e6xxx: Introduce _mv88e6xxx_phy_page_{read, write} bpf: make padding in bpf_tunnel_key explicit ipv6: udp: fix UDP_MIB_IGNOREDMULTI updates bnxt_en: Fix ethtool -a reporting. bnxt_en: Fix typo in bnxt_hwrm_set_pause_common(). bnxt_en: Implement proper firmware message padding. ...
2016-04-01Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A handful of const updates for reset ops and a couple fixes to the newly introduced IPQ4019 clock driver" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: ipq4019: add some fixed clocks for ddrppl and fepll clk: qcom: ipq4019: switch remaining defines to enums clk: qcom: Make reset_control_ops const clk: tegra: Make reset_control_ops const clk: sunxi: Make reset_control_ops const clk: atlas7: Make reset_control_ops const clk: rockchip: Make reset_control_ops const clk: mmp: Make reset_control_ops const clk: mediatek: Make reset_control_ops const
2016-04-01Merge tag 'pm+acpi-4.6-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fix from Rafael J. Wysocki: "Just one fix for a nasty boot failure on some systems based on Intel Skylake that shipped with broken firmware where enabling hardware-coordinated P-states management (HWP) causes a faulty interrupt handler in SMM to be invoked and crash the system (Srinivas Pandruvada)" * tag 'pm+acpi-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / processor: Request native thermal interrupt handling via _OSC
2016-04-01Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge fixes from Andrew Morton: "11 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: .mailmap: add Christophe Ricard Make CONFIG_FHANDLE default y mm/page_isolation.c: fix the function comments oom, oom_reaper: do not enqueue task if it is on the oom_reaper_list head mm/page_isolation: fix tracepoint to mirror check function behavior mm/rmap: batched invalidations should use existing api x86/mm: TLB_REMOTE_SEND_IPI should count pages mm: fix invalid node in alloc_migrate_target() include/linux/huge_mm.h: return NULL instead of false for pmd_trans_huge_lock() mm, kasan: fix compilation for CONFIG_SLAB MAINTAINERS: orangefs mailing list is subscribers-only
2016-04-02Merge branch 'acpi-processor'Rafael J. Wysocki
* acpi-processor: ACPI / processor: Request native thermal interrupt handling via _OSC
2016-04-01Merge branch 'for-linus-4.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "This has a few fixes Dave Sterba had queued up. These are all pretty small, but since they were tested I decided against waiting for more" * 'for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: transaction_kthread() is not freezable btrfs: cleaner_kthread() doesn't need explicit freeze btrfs: do not write corrupted metadata blocks to disk btrfs: csum_tree_block: return proper errno value
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-05 00:41:24 +0000