summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2017-01-25usb: host: xhci: remove unneded semicolonFelipe Balbi
it does no good, let's remove it. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: simplify irq handler returnFelipe Balbi
Instead of having several return points, let's use a local variable and a single place to return. This makes the code slightly easier to read. [set ret = IRQ_HANDLED in default working case -Mathias] Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: rename completion codes to match specFelipe Balbi
Cleanup only. This patch is a mechaninal rename to make sure our macros for TRB completion codes match what the specification uses to refer to such errors. The idea behind this is that it makes it far easier to grep the specification and match it with implementation. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: print HCIVERSION on debugFelipe Balbi
When calling xhci_dbg_regs() we actually _do_ want to know XHCI's version. This might help figure out why certain problems only happen in some cases. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: change pre-increments to post-incrementsFelipe Balbi
This is a cleanup patch only, no functional changes. The idea is just to make sure for loops look the same all over the driver. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: xhci: remove unnecessary return in xhci_pci_setup()Lu Baolu
Remove the unnecessary return line in xhci_pci_setup(). Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: xhci: use list_is_singular for cmd_listLu Baolu
Use list_is_singular() to check if cmd_list has only one entry. [use list_empty() in queue command instead -Mathias] Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: xhci: avoid unnecessary calculationLu Baolu
No need to calculate remainder and length_field, if there is no data phase of a control transfer. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: xhci: remove unnecessary assignmentLu Baolu
Drop an unnecessary assignment in prepare_transfer(). Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci-plat: enable BROKEN_PED quirk if platform requestedFelipe Balbi
In case 'quirk-broken-port-ped' property is passed in via device property, we should enable the corresponding BROKEN_PED quirk flag for XHCI core. [rogerq@ti.com] Updated code from platform data to device property and added DT binding. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: xhci: add quirk flag for broken PED bitsFelipe Balbi
Some devices from Texas Instruments [1] suffer from a silicon bug where Port Enabled/Disabled bit should not be used to silence an erroneous device. The bug is so that if port is disabled with PED bit, an IRQ for device removal (or attachment) will never fire. Just for the sake of completeness, the actual problem lies with SNPS USB IP and this affects all known versions up to 3.00a. A separate patch will be added to dwc3 to enabled this quirk flag if version is <= 3.00a. [1] - AM572x Silicon Errata http://www.ti.com/lit/er/sprz429j/sprz429j.pdf Section i896— USB xHCI Port Disable Feature Does Not Work Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25xhci: Put warning message on a single lineAlexander Stein
This allows someone to grep for the complete warning message as in; xhci-hcd xhci-hcd.0.auto: USB core suspending device not in U0/U1/U2. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: host: xhci: Remove unused 'addr_64' variable in xhci_hcd structureBaolin Wang
Since the 'addr_64' variable as legacy is unused now, then remove it from xhci_hcd structure. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: xhci: remove unnecessary second abort tryLu Baolu
The second try was a workaround for (what we thought was) command ring failing to stop in the first place. But this turns out to be due to the race that we have fixed(see "xhci: Fix race related to abort operation"). With that fix, it is time to remove the second try. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25xhci: remove unnecessary check for pending timerMathias Nyman
Checking if the command timeout timer is pending when queueing the first command to the command ring is not really useful, remove it. Suggested-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25xhci: detect stop endpoint race using pending timer instead of counter.Mathias Nyman
A counter was used to find out if the stop endpoint completion raced with the stop endpoint timeout timer. This was needed in case the stop ep completion failed to delete the timer as it was running on anoter cpu. The EP_STOP_CMD_PENDING flag was not enough as a new stop endpoint command may be queued between the command completion and timeout function, which would set the flag back. Instead of the separate counter that was used we can detect the race by checking both the STOP_EP_PENDING flag and timer_pending in the timeout function. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25xhci: rename EP_HALT_PENDING to EP_STOP_CMD_PENDINGMathias Nyman
We don't want to confuse halted and stalled endpoint states with a flag indicating we are waiting for a stop endpoint command to finish or timeout Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25xhci: simplify if statement to make it more readableMathias Nyman
No functional change, De Morgan !(A && B) = (!A || !B) Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: storage: sddr09: Remove a set-but-not-used variableAugusto Mecking Caringi
The 'isnew' variable in 'sddr09_write_lba' function is set but never used. This has been detected by building the driver with W=1: drivers/usb/storage/sddr09.c: In function ‘sddr09_write_lba’: drivers/usb/storage/sddr09.c:873:17: warning: variable ‘isnew’ set but not used [-Wunused-but-set-variable] int i, result, isnew; ^ Signed-off-by: Augusto Mecking Caringi <augustocaringi@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: musb: constify musb_hdrc_config structuresBhumika Goyal
Declare musb_hdrc_config structures as const as they are only stored in the config field of a musb_hdrc_platform_data structure. This field is of type const, so musb_hdrc_config structures having this property can be made const too. Done using Coccinelle: @r disable optional_qualifier@ identifier x; position p; @@ static struct musb_hdrc_config x@p={...}; @ok@ struct musb_hdrc_platform_data pdata; identifier r.x; position p; @@ pdata.config=&x@p; @bad@ position p != {r.p,ok.p}; identifier r.x; @@ x@p @depends on !bad disable optional_qualifier@ identifier r.x; @@ +const struct musb_hdrc_config x; File size before: text data bss dec hex filename 1212 338 0 1550 60e drivers/usb/musb/jz4740.o File size after: text data bss dec hex filename 1268 290 0 1558 616 drivers/usb/musb/jz4740.o File size before: text data bss dec hex filename 6151 333 16 6500 1964 drivers/usb/musb/sunxi.o File size after: text data bss dec hex filename 6215 269 16 6500 1964 drivers/usb/musb/sunxi.o File size before: text data bss dec hex filename 3668 864 0 4532 11b4 drivers/usb/musb/ux500.o File size after: text data bss dec hex filename 3724 808 0 4532 11b4 drivers/usb/musb/ux500.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25Merge 4.10-rc5 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well to handle future merge issues and dependancies. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-24usb: dwc2: gadget: Add checking for g-tx-fifo-size parameterSevak Arakelyan
Add dwc2_check_param_tx_fifo_sizes function which validates the members of g_tx_fifo_size array and sets to average or default values if it is needed. Cc: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Sevak Arakelyan <sevaka@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: gadget: Set TX FIFO depths to calculated defaultsSevak Arakelyan
Remove legacy DWC2_G_P_LEGACY_TX_FIFO_SIZE array for TX FIFOs. Update dwc2_set_param_tx_fifo_sizes function to calculate and assign default average FIFO depth to each member of g_tx_fifo_size array. Total FIFO size, EP Info block's size, FIFO operation mode and device operation mode are taken into consideration during the calculation. Cc: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Sevak Arakelyan <sevaka@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: host: Correct snpsid checking for GDFIFOCFGSevak Arakelyan
GDFIFOCFG is available from IP version 2.91a. Fix the code to reflect this. Signed-off-by: Sevak Arakelyan <sevaka@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: host: use msleep() for long delayNicholas Mc Guire
ulseep_range() uses hrtimers and provides no advantage over msleep() for larger delays. Fix up the 100ms delays here passing the adjusted "min" value to msleep(). This helps reduce the load on the hrtimer subsystem. Link: http://lkml.org/lkml/2017/1/11/377 Fixes: commit 2938fc63e0c2 ("usb: dwc2: Properly account for the force mode delays") Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: Add a quirk to allow speed negotiation for Hisilicon Hi6220Chen Yu
The Hi6220's usb controller is limited in that it does not support "Split Transactions", so it does not support communicating with low-speed and full-speed devices behind a high-speed hub. Thus it requires a quirk so that we can manually drop the usb speed when low/full-speed are attached, and bump back to high speed when they are removed. Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: John Youn <johnyoun@synopsys.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Chen Yu <chenyu56@huawei.com> Cc: Vardan Mikayelyan <mvardan@synopsys.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Signed-off-by: Chen Yu <chenyu56@huawei.com> [jstultz: Reworked to simplify the patch, and made commit log to be more specific about the issue] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: Force port resume on switching to device modeChen Yu
We've seen failures when switching between host and gadget mode, which was diagnosed as being caused due to the bus being auto-suspended when we switched. So this patch forces a port resume when switching to device mode if the bus is suspended. Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: John Youn <johnyoun@synopsys.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Chen Yu <chenyu56@huawei.com> Cc: Vardan Mikayelyan <mvardan@synopsys.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Signed-off-by: Chen Yu <chenyu56@huawei.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: Workaround case where GOTGCTL state is wrongJohn Stultz
When removing a USB-A to USB-otg adapter cable, we get a change status irq, and then in dwc2_conn_id_status_change, we erroneously see the GOTGCTL_CONID_B flag set. This causes us to get stuck in the "while (!dwc2_is_device_mode(hsotg))" loop, spitting out "Waiting for Peripheral Mode, Mode=Host" warnings until it fails out many seconds later. This patch works around the issue by re-reading the GOTGCTL state to check if the GOTGCTL_CONID_B is still set and if not restarting the change status logic. Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: John Youn <johnyoun@synopsys.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Chen Yu <chenyu56@huawei.com> Cc: Vardan Mikayelyan <mvardan@synopsys.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Reviewed-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: Avoid sleeping while holding hsotg->lockJohn Stultz
Basically when plugging in various cables in different orders, I'm occasionally seeing the following BUG splat: [ 86.215403] BUG: scheduling while atomic: kworker/u16:2/53/0x00000002 [ 86.219164] usb 1-1: USB disconnect, device number 9 [ 86.226845] Preemption disabled at:[ 86.230218] [<ffffff8008673558>] dwc2_conn_id_status_change+0x120/0x250 [ 86.236894] CPU: 0 PID: 53 Comm: kworker/u16:2 Tainted: G W 4.9.0-rc8-00051-gd5a7979-dirty #1702 [ 86.246836] Hardware name: HiKey Development Board (DT) [ 86.252100] Workqueue: dwc2 dwc2_conn_id_status_change [ 86.257279] Call trace: [ 86.259771] [<ffffff8008087c28>] dump_backtrace+0x0/0x1a0 [ 86.265210] [<ffffff8008087ddc>] show_stack+0x14/0x20 [ 86.270308] [<ffffff80084343f0>] dump_stack+0x90/0xb0 [ 86.275401] [<ffffff80080d8d94>] __schedule_bug+0x6c/0xb8 [ 86.280841] [<ffffff8008a07220>] __schedule+0x4f8/0x5b0 [ 86.286099] [<ffffff8008a073e8>] schedule+0x38/0xa0 [ 86.291017] [<ffffff8008a0a6cc>] schedule_hrtimeout_range_clock+0x8c/0xf0 [ 86.297846] [<ffffff8008a0a740>] schedule_hrtimeout_range+0x10/0x18 [ 86.304150] [<ffffff8008a0a4a0>] usleep_range+0x50/0x58 [ 86.309418] [<ffffff800866d8dc>] dwc2_wait_for_mode.isra.4+0x54/0xd0 [ 86.315815] [<ffffff800866f058>] dwc2_core_reset+0xe0/0x168 [ 86.321431] [<ffffff800867e364>] dwc2_hsotg_core_init_disconnected+0x2c/0x310 [ 86.328602] [<ffffff8008673568>] dwc2_conn_id_status_change+0x130/0x250 [ 86.335254] [<ffffff80080ccd48>] process_one_work+0x118/0x370 [ 86.341035] [<ffffff80080ccfe8>] worker_thread+0x48/0x498 [ 86.346473] [<ffffff80080d2eb0>] kthread+0xd0/0xe8 [ 86.351299] [<ffffff8008082e80>] ret_from_fork+0x10/0x50 This seems to be caused by the dwc2_wait_for_mode() calling usleep_range() while the hstog->lock spinlock is held, since we take that before calling dwc2_hsotg_core_init_disconnected(). This patch avoids the issue by adding an extra argument to dwc2_core_reset(), as suggested by John Youn, which allows us to skip the waiting, which should be unnecessary when calling from dwc2_hsotg_core_init_disconnected(). Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: John Youn <johnyoun@synopsys.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Chen Yu <chenyu56@huawei.com> Cc: Vardan Mikayelyan <mvardan@synopsys.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: Show dr_mode via debugfsJohn Youn
Show the value of dr_mode via a debufs file. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: Remove debug prints in params.cJohn Youn
Remove debugging prints to show params. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: Add debugfs file to show paramsJohn Youn
Show the core params and hardware params. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: Remove unnecessary parametersJohn Youn
Further reduce the set of parameters set by platforms. Many of them are unnecessary as they should be reported by hardware. They should only need to be overridden if there is a problem. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: Fix usage of bool paramsJohn Youn
Check these parameters only for true or false. There is no need to check for greater or less than 0. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: Remove platform static paramsJohn Youn
Remove the platform-specific static param structs and set only those params that are necessary for each platform. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: Check core parametersJohn Youn
Check that core parameters have valid values and adjust them if they aren't. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: Rearrange param structure membersJohn Youn
Group the members by global, host, and gadget params. Formatting and organizational change only. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: Update parameter typesJohn Youn
Update the param types to appropriately sized ints and bools. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: Get device propertiesJohn Youn
After setting the default core parameter values, read in the device properties and modify core parameter values if needed. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: Set core parameters to default valuesJohn Youn
Initialize the core parameters to their default, auto-detected values. Remove all the previous dwc2_set_param* methods. Most of what this code is doing is handling defaults for "not set" values and other trivial checks. The checking can be simplified and will be done in a later commit. This allows us to change only those parameters that won't work with default settings. It also allows us to use non-int parameters. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: Remove unused otg_ver parameterJohn Youn
The otg_ver parameter only controls the SRP pulsing method and defaults to the 1.3 behavior. It is unused and can be removed. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: gadget: f_hid: fix: Move IN request allocation to set_alt()Krzysztof Opasiak
Since commit: ba1582f22231 ("usb: gadget: f_hid: use alloc_ep_req()") we cannot allocate any requests in bind() as we check if we should align request buffer based on endpoint descriptor which is assigned in set_alt(). Allocating request in bind() function causes a NULL pointer dereference. This commit moves allocation of IN request from bind() to set_alt() to prevent this issue. Fixes: ba1582f22231 ("usb: gadget: f_hid: use alloc_ep_req()") Cc: stable@vger.kernel.org Tested-by: David Lechner <david@lechnology.com> Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: gadget: udc: constify usb_ep_ops structuresBhumika Goyal
Declare usb_ep_ops structures as const as they are only stored in the ops field of an usb_ep structure. This field is of type const, so usb_ep_ops structures having this property can be made const too. Done using Coccinelle( A smaller version of the script) @r disable optional_qualifier@ identifier i; position p; @@ static struct usb_ep_ops i@p={...}; @ok@ identifier r.i; position p; struct mv_ep a; struct mv_u3d_ep b; struct omap_ep c; @@ ( a.ep.ops=&i@p; | b.ep.ops=&i@p; | c.ep.ops=&i@p; ) @bad@ position p!={r.p,ok.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ +const struct usb_ep_ops i; File size details before and after applying the patch. First line of every .o file shows the file size before patching and second line shows the file size after patching. text data bss dec hex filename 7782 384 8 8174 1fee usb/gadget/udc/fotg210-udc.o 7878 296 8 8182 1ff6 usb/gadget/udc/fotg210-udc.o 17866 992 40 18898 49d2 usb/gadget/udc/fsl_udc_core.o 17954 896 40 18890 49ca usb/gadget/udc/fsl_udc_core.o 9646 288 8 9942 26d6 usb/gadget/udc/fusb300_udc.o 9742 192 8 9942 26d6 usb/gadget/udc/fusb300_udc.o 12752 416 8 13176 3378 drivers/usb/gadget/udc/goku_udc.o 12832 328 8 13168 3370 drivers/usb/gadget/udc/goku_udc.o 16541 1696 8 18245 4745 drivers/usb/gadget/udc/gr_udc.o 16637 1600 8 18245 4745 drivers/usb/gadget/udc/gr_udc.o 15798 288 16 16102 3ee6 drivers/usb/gadget/udc/m66592-udc.o 15894 192 16 16102 3ee6 drivers/usb/gadget/udc/m66592-udc.o 17751 3808 16 21575 5447 usb/gadget/udc/mv_u3d_core.o 17839 3712 16 21567 543f usb/gadget/udc/mv_u3d_core.o 17348 1112 24 18484 4834 usb/gadget/udc/mv_udc_core.o 17436 1016 24 18476 482c usb/gadget/udc/mv_udc_core.o 25990 2620 13 28623 6fcf drivers/usb/gadget/udc/net2272.o 26086 2524 13 28623 6fcf drivers/usb/gadget/udc/net2272.o 18409 7312 8 25729 6481 drivers/usb/gadget/udc/pxa27x_udc.o 18505 7208 8 25721 6479 drivers/usb/gadget/udc/pxa27x_udc.o 18644 288 16 18948 4a04 usb/gadget/udc/r8a66597-udc.o 18740 192 16 18948 4a04 usb/gadget/udc/r8a66597-udc.o Files: drivers/usb/gadget/udc/{s3c-hsudc.o/omap_udc.o/fsl_qe_udc.o} did not complie. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: gadget: udc: atmel: Update endpoint allocation schemeCristian Birsan
This patch updates the usb endpoint allocation scheme for atmel usba driver to make sure all endpoints are allocated in order. This requirement comes from the datasheet of the controller. The allocation scheme is decided by fifo_mode parameter. For fifo_mode = 0 the driver tries to autoconfigure the endpoints fifo size. All other modes contain fixed configurations optimized for different purposes. The idea is somehow similar with the approach used on musb driver. Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: gadget: f_fs: Accept up to 30 endpoints.Vincent Pelletier
It is allowed by the USB specification to enabled same-address, opposite- direction endpoints simultaneously, which means 30 non-zero endpoints are allowed. So double eps_addrmap length to 30. The original code only accepted 14 descriptors out of a likely intended 15 (as there are 15 endpoint addresses, ignoring direction), because the first eps_addrmap entry is unused (it is a placeholder for endpoint zero). So increase eps_addrmap length by one to 31. Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: gadger: f_fs: Do not copy past descriptor end.Vincent Pelletier
Endpoint descriptors come in 2 sizes, struct usb_endpoint_descriptor being the largest. Use bLength to stop on endpoint descriptor boundary, and not 2 bytes too far. Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: phy: fsl: Remove the set_power callbackBaolin Wang
Since the set_power callback did not do anything for power setting, then remove it. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: phy: msm: Remove the set_power callbackBaolin Wang
Since it will not set the PMIC current drawn from USB configuration by set_power callback, then remove it. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: phy: ab8500: Remove the set_power callbackBaolin Wang
There are no users will use the vbus_draw variable set by set_power() callback to set the vbus current. Thus we can remove it. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: gadget: Set GDFIFOCFGSevak Arakelyan
Add programming of GDFIFOCFG register in device mode. It must contain start address for EP Info block and total FIFO depth. Signed-off-by: Sevak Arakelyan <sevaka@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-05 23:52:39 +0000