summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2018-04-23net: ieee802154: mcr20a: do not leak resources on error pathStefan Schmidt
We already allocated the device and platform data at this point. Instead of simply return from the probe function we need to cleanup the resources first. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: Xue Liu <liuxuenetmail@gmail.com>
2018-04-23net: ieee802154: atusb: Replace GFP_ATOMIC with GFP_KERNEL in atusb_probeJia-Ju Bai
atusb_probe() is never called in atomic context. This function is only set as ".probe" in struct usb_driver. Despite never getting called from atomic context, atusb_probe() calls usb_alloc_urb() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. This is found by a static analysis tool named DCNS written by myself. And I also manually check it. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com>
2018-04-23ieee802154: mcr20a: Fix memory leak in mcr20a_probeGustavo A. R. Silva
Free allocated memory for pdata before return. Addresses-Coverity-ID: 1466096 ("Resource leak") Fixes: 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Xue Liu <liuxuenetmail@gmail.com> Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com>
2018-04-23ipv6: add RTA_TABLE and RTA_PREFSRC to rtm_ipv6_policyEric Dumazet
KMSAN reported use of uninit-value that I tracked to lack of proper size check on RTA_TABLE attribute. I also believe RTA_PREFSRC lacks a similar check. Fixes: 86872cb57925 ("[IPv6] route: FIB6 configuration using struct fib6_config") Fixes: c3968a857a6b ("ipv6: RTA_PREFSRC support for ipv6 route source address selection") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-23bonding: do not set slave_dev npinfo before slave_enable_netpoll in bond_enslaveXin Long
After Commit 8a8efa22f51b ("bonding: sync netpoll code with bridge"), it would set slave_dev npinfo in slave_enable_netpoll when enslaving a dev if bond->dev->npinfo was set. However now slave_dev npinfo is set with bond->dev->npinfo before calling slave_enable_netpoll. With slave_dev npinfo set, __netpoll_setup called in slave_enable_netpoll will not call slave dev's .ndo_netpoll_setup(). It causes that the lower dev of this slave dev can't set its npinfo. One way to reproduce it: # modprobe bonding # brctl addbr br0 # brctl addif br0 eth1 # ifconfig bond0 192.168.122.1/24 up # ifenslave bond0 eth2 # systemctl restart netconsole # ifenslave bond0 br0 # ifconfig eth2 down # systemctl restart netconsole The netpoll won't really work. This patch is to remove that slave_dev npinfo setting in bond_enslave(). Fixes: 8a8efa22f51b ("bonding: sync netpoll code with bridge") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-23tcp: don't read out-of-bounds opsizeJann Horn
The old code reads the "opsize" variable from out-of-bounds memory (first byte behind the segment) if a broken TCP segment ends directly after an opcode that is neither EOL nor NOP. The result of the read isn't used for anything, so the worst thing that could theoretically happen is a pagefault; and since the physmap is usually mostly contiguous, even that seems pretty unlikely. The following C reproducer triggers the uninitialized read - however, you can't actually see anything happen unless you put something like a pr_warn() in tcp_parse_md5sig_option() to print the opsize. ==================================== #define _GNU_SOURCE #include <arpa/inet.h> #include <stdlib.h> #include <errno.h> #include <stdarg.h> #include <net/if.h> #include <linux/if.h> #include <linux/ip.h> #include <linux/tcp.h> #include <linux/in.h> #include <linux/if_tun.h> #include <err.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <string.h> #include <stdio.h> #include <unistd.h> #include <sys/ioctl.h> #include <assert.h> void systemf(const char *command, ...) { char *full_command; va_list ap; va_start(ap, command); if (vasprintf(&full_command, command, ap) == -1) err(1, "vasprintf"); va_end(ap); printf("systemf: <<<%s>>>\n", full_command); system(full_command); } char *devname; int tun_alloc(char *name) { int fd = open("/dev/net/tun", O_RDWR); if (fd == -1) err(1, "open tun dev"); static struct ifreq req = { .ifr_flags = IFF_TUN|IFF_NO_PI }; strcpy(req.ifr_name, name); if (ioctl(fd, TUNSETIFF, &req)) err(1, "TUNSETIFF"); devname = req.ifr_name; printf("device name: %s\n", devname); return fd; } #define IPADDR(a,b,c,d) (((a)<<0)+((b)<<8)+((c)<<16)+((d)<<24)) void sum_accumulate(unsigned int *sum, void *data, int len) { assert((len&2)==0); for (int i=0; i<len/2; i++) { *sum += ntohs(((unsigned short *)data)[i]); } } unsigned short sum_final(unsigned int sum) { sum = (sum >> 16) + (sum & 0xffff); sum = (sum >> 16) + (sum & 0xffff); return htons(~sum); } void fix_ip_sum(struct iphdr *ip) { unsigned int sum = 0; sum_accumulate(&sum, ip, sizeof(*ip)); ip->check = sum_final(sum); } void fix_tcp_sum(struct iphdr *ip, struct tcphdr *tcp) { unsigned int sum = 0; struct { unsigned int saddr; unsigned int daddr; unsigned char pad; unsigned char proto_num; unsigned short tcp_len; } fakehdr = { .saddr = ip->saddr, .daddr = ip->daddr, .proto_num = ip->protocol, .tcp_len = htons(ntohs(ip->tot_len) - ip->ihl*4) }; sum_accumulate(&sum, &fakehdr, sizeof(fakehdr)); sum_accumulate(&sum, tcp, tcp->doff*4); tcp->check = sum_final(sum); } int main(void) { int tun_fd = tun_alloc("inject_dev%d"); systemf("ip link set %s up", devname); systemf("ip addr add 192.168.42.1/24 dev %s", devname); struct { struct iphdr ip; struct tcphdr tcp; unsigned char tcp_opts[20]; } __attribute__((packed)) syn_packet = { .ip = { .ihl = sizeof(struct iphdr)/4, .version = 4, .tot_len = htons(sizeof(syn_packet)), .ttl = 30, .protocol = IPPROTO_TCP, /* FIXUP check */ .saddr = IPADDR(192,168,42,2), .daddr = IPADDR(192,168,42,1) }, .tcp = { .source = htons(1), .dest = htons(1337), .seq = 0x12345678, .doff = (sizeof(syn_packet.tcp)+sizeof(syn_packet.tcp_opts))/4, .syn = 1, .window = htons(64), .check = 0 /*FIXUP*/ }, .tcp_opts = { /* INVALID: trailing MD5SIG opcode after NOPs */ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 19 } }; fix_ip_sum(&syn_packet.ip); fix_tcp_sum(&syn_packet.ip, &syn_packet.tcp); while (1) { int write_res = write(tun_fd, &syn_packet, sizeof(syn_packet)); if (write_res != sizeof(syn_packet)) err(1, "packet write failed"); } } ==================================== Fixes: cfb6eeb4c860 ("[TCP]: MD5 Signature Option (RFC2385) support.") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2018-04-21 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a deadlock between mm->mmap_sem and bpf_event_mutex when one task is detaching a BPF prog via perf_event_detach_bpf_prog() and another one dumping through bpf_prog_array_copy_info(). For the latter we move the copy_to_user() out of the bpf_event_mutex lock to fix it, from Yonghong. 2) Fix test_sock and test_sock_addr.sh failures. The former was hitting rlimit issues and the latter required ping to specify the address family, from Yonghong. 3) Remove a dead check in sockmap's sock_map_alloc(), from Jann. 4) Add generated files to BPF kselftests gitignore that were previously missed, from Anders. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-22ibmvnic: Clean actual number of RX or TX poolsThomas Falcon
Avoid using value stored in the login response buffer when cleaning TX and RX buffer pools since these could be inconsistent depending on the device state. Instead use the field in the driver's private data that tracks the number of active pools. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-22Merge branch 'net-sched-ife-malformed-ife-packet-fixes'David S. Miller
Alexander Aring says: ==================== net: sched: ife: malformed ife packet fixes As promised at netdev 2.2 tc workshop I am working on adding scapy support for tdc testing. It is still work in progress. I will submit the patches to tdc later (they are not in good shape yet). The good news is I have been able to find bugs which normal packet testing would not be able to find. With fuzzy testing I was able to craft certain malformed packets that IFE action was not able to deal with. This patch set fixes those bugs. changes since v4: - use pskb_may_pull before pointer assign changes since v3: - use pskb_may_pull changes since v2: - remove inline from __ife_tlv_meta_valid - add const to cast to meta_tlvhdr - add acked and reviewed tags ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-22net: sched: ife: check on metadata lengthAlexander Aring
This patch checks if sk buffer is available to dererence ife header. If not then NULL will returned to signal an malformed ife packet. This avoids to crashing the kernel from outside. Signed-off-by: Alexander Aring <aring@mojatatu.com> Reviewed-by: Yotam Gigi <yotam.gi@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-22net: sched: ife: handle malformed tlv lengthAlexander Aring
There is currently no handling to check on a invalid tlv length. This patch adds such handling to avoid killing the kernel with a malformed ife packet. Signed-off-by: Alexander Aring <aring@mojatatu.com> Reviewed-by: Yotam Gigi <yotam.gi@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-22net: sched: ife: signal not finding metaidAlexander Aring
We need to record stats for received metadata that we dont know how to process. Have find_decode_metaid() return -ENOENT to capture this. Signed-off-by: Alexander Aring <aring@mojatatu.com> Reviewed-by: Yotam Gigi <yotam.gi@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-22strparser: Do not call mod_delayed_work with a timeout of LONG_MAXDoron Roberts-Kedes
struct sock's sk_rcvtimeo is initialized to LONG_MAX/MAX_SCHEDULE_TIMEOUT in sock_init_data. Calling mod_delayed_work with a timeout of LONG_MAX causes spurious execution of the work function. timer->expires is set equal to jiffies + LONG_MAX. When timer_base->clk falls behind the current value of jiffies, the delta between timer_base->clk and jiffies + LONG_MAX causes the expiration to be in the past. Returning early from strp_start_timer if timeo == LONG_MAX solves this problem. Found while testing net/tls_sw recv path. Fixes: 43a0c6751a322847 ("strparser: Stream parser for messages") Reviewed-by: Tejun Heo <tj@kernel.org> Signed-off-by: Doron Roberts-Kedes <doronrk@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-22ipv6: sr: fix NULL pointer dereference in seg6_do_srh_encap()- v4 pktsAhmed Abdelsalam
In case of seg6 in encap mode, seg6_do_srh_encap() calls set_tun_src() in order to set the src addr of outer IPv6 header. The net_device is required for set_tun_src(). However calling ip6_dst_idev() on dst_entry in case of IPv4 traffic results on the following bug. Using just dst->dev should fix this BUG. [ 196.242461] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 196.242975] PGD 800000010f076067 P4D 800000010f076067 PUD 10f060067 PMD 0 [ 196.243329] Oops: 0000 [#1] SMP PTI [ 196.243468] Modules linked in: nfsd auth_rpcgss nfs_acl nfs lockd grace fscache sunrpc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd cryptd input_leds glue_helper led_class pcspkr serio_raw mac_hid video autofs4 hid_generic usbhid hid e1000 i2c_piix4 ahci pata_acpi libahci [ 196.244362] CPU: 2 PID: 1089 Comm: ping Not tainted 4.16.0+ #1 [ 196.244606] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 196.244968] RIP: 0010:seg6_do_srh_encap+0x1ac/0x300 [ 196.245236] RSP: 0018:ffffb2ce00b23a60 EFLAGS: 00010202 [ 196.245464] RAX: 0000000000000000 RBX: ffff8c7f53eea300 RCX: 0000000000000000 [ 196.245742] RDX: 0000f10000000000 RSI: ffff8c7f52085a6c RDI: ffff8c7f41166850 [ 196.246018] RBP: ffffb2ce00b23aa8 R08: 00000000000261e0 R09: ffff8c7f41166800 [ 196.246294] R10: ffffdce5040ac780 R11: ffff8c7f41166828 R12: ffff8c7f41166808 [ 196.246570] R13: ffff8c7f52085a44 R14: ffffffffb73211c0 R15: ffff8c7e69e44200 [ 196.246846] FS: 00007fc448789700(0000) GS:ffff8c7f59d00000(0000) knlGS:0000000000000000 [ 196.247286] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 196.247526] CR2: 0000000000000000 CR3: 000000010f05a000 CR4: 00000000000406e0 [ 196.247804] Call Trace: [ 196.247972] seg6_do_srh+0x15b/0x1c0 [ 196.248156] seg6_output+0x3c/0x220 [ 196.248341] ? prandom_u32+0x14/0x20 [ 196.248526] ? ip_idents_reserve+0x6c/0x80 [ 196.248723] ? __ip_select_ident+0x90/0x100 [ 196.248923] ? ip_append_data.part.50+0x6c/0xd0 [ 196.249133] lwtunnel_output+0x44/0x70 [ 196.249328] ip_send_skb+0x15/0x40 [ 196.249515] raw_sendmsg+0x8c3/0xac0 [ 196.249701] ? _copy_from_user+0x2e/0x60 [ 196.249897] ? rw_copy_check_uvector+0x53/0x110 [ 196.250106] ? _copy_from_user+0x2e/0x60 [ 196.250299] ? copy_msghdr_from_user+0xce/0x140 [ 196.250508] sock_sendmsg+0x36/0x40 [ 196.250690] ___sys_sendmsg+0x292/0x2a0 [ 196.250881] ? _cond_resched+0x15/0x30 [ 196.251074] ? copy_termios+0x1e/0x70 [ 196.251261] ? _copy_to_user+0x22/0x30 [ 196.251575] ? tty_mode_ioctl+0x1c3/0x4e0 [ 196.251782] ? _cond_resched+0x15/0x30 [ 196.251972] ? mutex_lock+0xe/0x30 [ 196.252152] ? vvar_fault+0xd2/0x110 [ 196.252337] ? __do_fault+0x1f/0xc0 [ 196.252521] ? __handle_mm_fault+0xc1f/0x12d0 [ 196.252727] ? __sys_sendmsg+0x63/0xa0 [ 196.252919] __sys_sendmsg+0x63/0xa0 [ 196.253107] do_syscall_64+0x72/0x200 [ 196.253305] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 196.253530] RIP: 0033:0x7fc4480b0690 [ 196.253715] RSP: 002b:00007ffde9f252f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 196.254053] RAX: ffffffffffffffda RBX: 0000000000000040 RCX: 00007fc4480b0690 [ 196.254331] RDX: 0000000000000000 RSI: 000000000060a360 RDI: 0000000000000003 [ 196.254608] RBP: 00007ffde9f253f0 R08: 00000000002d1e81 R09: 0000000000000002 [ 196.254884] R10: 00007ffde9f250c0 R11: 0000000000000246 R12: 0000000000b22070 [ 196.255205] R13: 20c49ba5e353f7cf R14: 431bde82d7b634db R15: 00007ffde9f278fe [ 196.255484] Code: a5 0f b6 45 c0 41 88 41 28 41 0f b6 41 2c 48 c1 e0 04 49 8b 54 01 38 49 8b 44 01 30 49 89 51 20 49 89 41 18 48 8b 83 b0 00 00 00 <48> 8b 30 49 8b 86 08 0b 00 00 48 8b 40 20 48 8b 50 08 48 0b 10 [ 196.256190] RIP: seg6_do_srh_encap+0x1ac/0x300 RSP: ffffb2ce00b23a60 [ 196.256445] CR2: 0000000000000000 [ 196.256676] ---[ end trace 71af7d093603885c ]--- Fixes: 8936ef7604c11 ("ipv6: sr: fix NULL pointer dereference when setting encap source address") Signed-off-by: Ahmed Abdelsalam <amsalam20@gmail.com> Acked-by: David Lebrun <dlebrun@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-22llc: fix NULL pointer deref for SOCK_ZAPPEDCong Wang
For SOCK_ZAPPED socket, we don't need to care about llc->sap, so we should just skip these refcount functions in this case. Fixes: f7e43672683b ("llc: hold llc_sap before release_sock()") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-22net: ethernet: ti: cpsw: fix tx vlan priority mappingIvan Khoronzhuk
The CPDMA_TX_PRIORITY_MAP in real is vlan pcp field priority mapping register and basically replaces vlan pcp field for tagged packets. So, set it to be 1:1 mapping. Otherwise, it will cause unexpected change of egress vlan tagged packets, like prio 2 -> prio 5. Fixes: e05107e6b747 ("net: ethernet: ti: cpsw: add multi queue support") Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-22llc: delete timers synchronously in llc_sk_free()Cong Wang
The connection timers of an llc sock could be still flying after we delete them in llc_sk_free(), and even possibly after we free the sock. We could just wait synchronously here in case of troubles. Note, I leave other call paths as they are, since they may not have to wait, at least we can change them to synchronously when needed. Also, move the code to net/llc/llc_conn.c, which is apparently a better place. Reported-by: <syzbot+f922284c18ea23a8e457@syzkaller.appspotmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-22l2tp: fix {pppol2tp, l2tp_dfs}_seq_stop() in case of seq_file overflowGuillaume Nault
Commit 0e0c3fee3a59 ("l2tp: hold reference on tunnels printed in pppol2tp proc file") assumed that if pppol2tp_seq_stop() was called with non-NULL private data (the 'v' pointer), then pppol2tp_seq_start() would not be called again. It turns out that this isn't guaranteed, and overflowing the seq_file's buffer in pppol2tp_seq_show() is a way to get into this situation. Therefore, pppol2tp_seq_stop() needs to reset pd->tunnel, so that pppol2tp_seq_start() won't drop a reference again if it gets called. We also have to clear pd->session, because the rest of the code expects a non-NULL tunnel when pd->session is set. The l2tp_debugfs module has the same issue. Fix it in the same way. Fixes: 0e0c3fee3a59 ("l2tp: hold reference on tunnels printed in pppol2tp proc file") Fixes: f726214d9b23 ("l2tp: hold reference on tunnels printed in l2tp/tunnels debugfs file") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-22Merge branch 's390-qeth-fixes'David S. Miller
Julian Wiedmann says: ==================== s390/qeth: fixes 2018-04-19 Please apply the following qeth fixes for 4.17. The common theme seems to be error handling improvements in various areas of cmd IO. Patches 1-3 should also go back to stable. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-22s390/qeth: use Read device to query hypervisor for MACJulian Wiedmann
For z/VM NICs, qeth needs to consider which of the three CCW devices in an MPC group it uses for requesting a managed MAC address. On the Base device, the hypervisor returns a default MAC which is pre-assigned when creating the NIC (this MAC is also returned by the READ MAC primitive). Querying any other device results in the allocation of an additional MAC address. For consistency with READ MAC and to avoid using up more addresses than necessary, it is preferable to use the NIC's default MAC. So switch the the diag26c over to using a NIC's Read device, which should always be identical to the Base device. Fixes: ec61bd2fd2a2 ("s390/qeth: use diag26c to get MAC address on L2") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-22s390/qeth: fix request-side race during cmd IO timeoutJulian Wiedmann
Submitting a cmd IO request (usually on the WRITE device, but for IDX also on the READ device) is currently done with ccw_device_start() and a manual timeout in the caller. On timeout, the caller cleans up the related resources (eg. IO buffer). But 1) the IO might still be active and utilize those resources, and 2) when the IO completes, qeth_irq() will attempt to clean up the same resources again. Instead of introducing additional resource locking, switch to ccw_device_start_timeout() to ensure IO termination after timeout, and let the IRQ handler alone deal with cleaning up after a request. This also removes a stray write->irq_pending reset from clear_ipacmd_list(). The routine doesn't terminate any pending IO on the WRITE device, so this should be handled properly via IO timeout in the IRQ handler. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-22s390/qeth: fix MAC address update sequenceJulian Wiedmann
When changing the MAC address on a L2 qeth device, current code first unregisters the old address, then registers the new one. If HW rejects the new address (or the IO fails), the device ends up with no operable address at all. Re-order the code flow so that the old address only gets dropped if the new address was registered successfully. While at it, add logic to catch some corner-cases. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-22s390/qeth: handle failure on workqueue creationJulian Wiedmann
Creating the global workqueue during driver init may fail, deal with it. Also, destroy the created workqueue on any subsequent error. Fixes: 0f54761d167f ("qeth: Support VEPA mode") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-22s390/qeth: avoid control IO completion stallsJulian Wiedmann
For control IO, qeth currently tracks the index of the buffer that it expects to complete the next IO on each qeth_channel. If the channel presents an IRQ while this buffer has not yet completed, no completion processing for _any_ completed buffer takes place. So if the 'next buffer' is skipped for any sort of reason* (eg. when it is released due to error conditions, before the IO is started), the buffer obviously won't switch to PROCESSED until it is eventually allocated for a _different_ IO and completes. Until this happens, all completion processing on that channel stalls and pending requests possibly time out. As a fix, remove the whole 'next buffer' logic and simply process any IO buffer right when it completes. A channel will never have more than one IO pending, so there's no risk of processing out-of-sequence. *Note: currently just one location in the code really handles this problem, by advancing the 'next' index manually. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-22s390/qeth: fix error handling in adapter command callbacksJulian Wiedmann
Make sure to check both return code fields before(!) processing the command response. Otherwise we risk operating on invalid data. This matches an earlier fix for SETASSPARMS commands, see commit ad3cbf613329 ("s390/qeth: fix error handling in checksum cmd callback"). Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-20bpf: sockmap remove dead checkJann Horn
Remove dead code that bails on `attr->value_size > KMALLOC_MAX_SIZE` - the previous check already bails on `attr->value_size != 4`. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-20Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal fixes from Eduardo Valentin: "A couple of fixes for the thermal subsystem" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: dt-bindings: thermal: Remove "cooling-{min|max}-level" properties dt-bindings: thermal: remove no longer needed samsung thermal properties
2018-04-20Merge tag 'mmc-v4.17-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "A couple of MMC host fixes: - sdhci-pci: Fixup tuning for AMD for eMMC HS200 mode - renesas_sdhi_internal_dmac: Avoid data corruption by limiting DMA RX" * tag 'mmc-v4.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: renesas_sdhi_internal_dmac: limit DMA RX for old SoCs mmc: sdhci-pci: Only do AMD tuning for HS200
2018-04-20Merge tag 'md/4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds
Pull MD fixes from Shaohua Li: "Three small fixes for MD: - md-cluster fix for faulty device from Guoqing - writehint fix for writebehind IO for raid1 from Mariusz - a live lock fix for interrupted recovery from Yufen" * tag 'md/4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: raid1: copy write hint from master bio to behind bio md/raid1: exit sync request if MD_RECOVERY_INTR is set md-cluster: don't update recovery_offset for faulty device
2018-04-20vfs: Undo an overly zealous MS_RDONLY -> SB_RDONLY conversionDavid Howells
In do_mount() when the MS_* flags are being converted to MNT_* flags, MS_RDONLY got accidentally convered to SB_RDONLY. Undo this change. Fixes: e462ec50cb5f ("VFS: Differentiate mount flags (MS_*) from internal superblock flags") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-20afs: Fix server record deletionDavid Howells
AFS server records get removed from the net->fs_servers tree when they're deleted, but not from the net->fs_addresses{4,6} lists, which can lead to an oops in afs_find_server() when a server record has been removed, for instance during rmmod. Fix this by deleting the record from the by-address lists before posting it for RCU destruction. The reason this hasn't been noticed before is that the fileserver keeps probing the local cache manager, thereby keeping the service record alive, so the oops would only happen when a fileserver eventually gets bored and stops pinging or if the module gets rmmod'd and a call comes in from the fileserver during the window between the server records being destroyed and the socket being closed. The oops looks something like: BUG: unable to handle kernel NULL pointer dereference at 000000000000001c ... Workqueue: kafsd afs_process_async_call [kafs] RIP: 0010:afs_find_server+0x271/0x36f [kafs] ... Call Trace: afs_deliver_cb_init_call_back_state3+0x1f2/0x21f [kafs] afs_deliver_to_call+0x1ee/0x5e8 [kafs] afs_process_async_call+0x5b/0xd0 [kafs] process_one_work+0x2c2/0x504 worker_thread+0x1d4/0x2ac kthread+0x11f/0x127 ret_from_fork+0x24/0x30 Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Unbalanced refcounting in TIPC, from Jon Maloy. 2) Only allow TCP_MD5SIG to be set on sockets in close or listen state. Once the connection is established it makes no sense to change this. From Eric Dumazet. 3) Missing attribute validation in neigh_dump_table(), also from Eric Dumazet. 4) Fix address comparisons in SCTP, from Xin Long. 5) Neigh proxy table clearing can deadlock, from Wolfgang Bumiller. 6) Fix tunnel refcounting in l2tp, from Guillaume Nault. 7) Fix double list insert in team driver, from Paolo Abeni. 8) af_vsock.ko module was accidently made unremovable, from Stefan Hajnoczi. 9) Fix reference to freed llc_sap object in llc stack, from Cong Wang. 10) Don't assume netdevice struct is DMA'able memory in virtio_net driver, from Michael S. Tsirkin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits) net/smc: fix shutdown in state SMC_LISTEN bnxt_en: Fix memory fault in bnxt_ethtool_init() virtio_net: sparse annotation fix virtio_net: fix adding vids on big-endian virtio_net: split out ctrl buffer net: hns: Avoid action name truncation docs: ip-sysctl.txt: fix name of some ipv6 variables vmxnet3: fix incorrect dereference when rxvlan is disabled llc: hold llc_sap before release_sock() MAINTAINERS: Direct networking documentation changes to netdev atm: iphase: fix spelling mistake: "Tansmit" -> "Transmit" net: qmi_wwan: add Wistron Neweb D19Q1 net: caif: fix spelling mistake "UKNOWN" -> "UNKNOWN" net: stmmac: Disable ACS Feature for GMAC >= 4 net: mvpp2: Fix DMA address mask size net: change the comment of dev_mc_init net: qualcomm: rmnet: Fix warning seen with fill_info tun: fix vlan packet truncation tipc: fix infinite loop when dumping link monitor summary tipc: fix use-after-free in tipc_nametbl_stop ...
2018-04-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "Assorted fixes. Some of that is only a matter with fault injection (broken handling of small allocation failure in various mount-related places), but the last one is a root-triggerable stack overflow, and combined with userns it gets really nasty ;-/" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Don't leak MNT_INTERNAL away from internal mounts mm,vmscan: Allow preallocating memory for register_shrinker(). rpc_pipefs: fix double-dput() orangefs_kill_sb(): deal with allocation failures jffs2_kill_sb(): deal with failed allocations hypfs_kill_super(): deal with failed allocations
2018-04-20Merge tag 'ecryptfs-4.17-rc2-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull eCryptfs fixes from Tyler Hicks: "Minor cleanups and a bug fix to completely ignore unencrypted filenames in the lower filesystem when filename encryption is enabled at the eCryptfs layer" * tag 'ecryptfs-4.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: don't pass up plaintext names when using filename encryption ecryptfs: fix spelling mistake: "cadidate" -> "candidate" ecryptfs: lookup: Don't check if mount_crypt_stat is NULL
2018-04-20Merge tag 'for_v4.17-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs - isofs memory leak fix - two fsnotify fixes of event mask handling - udf fix of UTF-16 handling - couple other smaller cleanups * tag 'for_v4.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Fix leak of UTF-16 surrogates into encoded strings fs: ext2: Adding new return type vm_fault_t isofs: fix potential memory leak in mount option parsing MAINTAINERS: add an entry for FSNOTIFY infrastructure fsnotify: fix typo in a comment about mark->g_list fsnotify: fix ignore mask logic in send_to_group() isofs compress: Remove VLA usage fs: quota: Replace GFP_ATOMIC with GFP_KERNEL in dquot_init fanotify: fix logic of events on child
2018-04-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - suspend/resume handling fix for Raydium I2C-connected touchscreen from Aaron Ma - protocol fixup for certain BT-connected Wacoms from Aaron Armstrong Skomra - battery level reporting fix on BT-connected mice from Dmitry Torokhov - hidraw race condition fix from Rodrigo Rivas Costa * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: i2c-hid: fix inverted return value from i2c_hid_command() HID: i2c-hid: Fix resume issue on Raydium touchscreen device HID: wacom: bluetooth: send exit report for recent Bluetooth devices HID: hidraw: Fix crash on HIDIOCGFEATURE with a destroyed device HID: input: fix battery level reporting on BT mice
2018-04-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching Pull livepatching fix from Jiri Kosina: "Shadow variable API list_head initialization fix from Petr Mladek" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: Allow to call a custom callback when freeing shadow variables livepatch: Initialize shadow variables safely by a custom callback
2018-04-20Merge tag 'for-linus-4.17-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - some fixes of kmalloc() flags - one fix of the xenbus driver - an update of the pv sound driver interface needed for a driver which will go through the sound tree * tag 'for-linus-4.17-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: xenbus_dev_frontend: Really return response string xen/sndif: Sync up with the canonical definition in Xen xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_reg_add xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in xen_pcibk_config_quirks_init xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_device_alloc xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_init_device xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_probe
2018-04-20Merge tag 'mips_fixes_4.17_1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS fixes from James Hogan: - io: Add barriers to read*() & write*() - dts: Fix boston PCI bus DTC warnings (4.17) - memset: Several corner case fixes (one 3.10, others longer) * tag 'mips_fixes_4.17_1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MIPS: uaccess: Add micromips clobbers to bzero invocation MIPS: memset.S: Fix clobber of v1 in last_fixup MIPS: memset.S: Fix return of __clear_user from Lpartial_fixup MIPS: memset.S: EVA & fault support for small_memset MIPS: dts: Boston: Fix PCI bus dtc warnings: MIPS: io: Add barrier after register read in readX() MIPS: io: Prevent compiler reordering writeX()
2018-04-20Merge tag 'powerpc-4.17-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix an off-by-one bug in our alternative asm patching which leads to incorrectly patched code. This bug lay dormant for nearly 10 years but we finally hit it due to a recent change. - Fix lockups when running KVM guests on Power8 due to a missing check when a thread that's running KVM comes out of idle. - Fix an out-of-spec behaviour in the XIVE code (P9 interrupt controller). - Fix EEH handling of bridge MMIO windows. - Prevent crashes in our RFI fallback flush handler if firmware didn't tell us the size of the L1 cache (only seen on simulators). Thanks to: Benjamin Herrenschmidt, Madhavan Srinivasan, Michael Neuling. * tag 'powerpc-4.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/kvm: Fix lockups when running KVM guests on Power8 powerpc/eeh: Fix enabling bridge MMIO windows powerpc/xive: Fix trying to "push" an already active pool VP powerpc/64s: Default l1d_size to 64K in RFI fallback flush powerpc/lib: Fix off-by-one in alternate feature patching
2018-04-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes and kexec-file-load from Martin Schwidefsky: "After the common code kexec patches went in via Andrew we can now push the architecture parts to implement the kexec-file-load system call. Plus a few more bug fixes and cleanups, this includes an update to the default configurations" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/signal: cleanup uapi struct sigaction s390: rename default_defconfig to debug_defconfig s390: remove gcov defconfig s390: update defconfig s390: add support for IBM z14 Model ZR1 s390: remove couple of duplicate includes s390/boot: remove unused COMPILE_VERSION and ccflags-y s390/nospec: include cpu.h s390/decompressor: Ignore file vmlinux.bin.full s390/kexec_file: add generated files to .gitignore s390/Kconfig: Move kexec config options to "Processor type and features" s390/kexec_file: Add ELF loader s390/kexec_file: Add crash support to image loader s390/kexec_file: Add image loader s390/kexec_file: Add kexec_file_load system call s390/kexec_file: Add purgatory s390/kexec_file: Prepare setup.h for kexec_file_load s390/smsgiucv: disable SMSG on module unload s390/sclp: avoid potential usage of uninitialized value
2018-04-19Don't leak MNT_INTERNAL away from internal mountsAl Viro
We want it only for the stuff created by SB_KERNMOUNT mounts, *not* for their copies. As it is, creating a deep stack of bindings of /proc/*/ns/* somewhere in a new namespace and exiting yields a stack overflow. Cc: stable@kernel.org Reported-by: Alexander Aring <aring@mojatatu.com> Bisected-by: Kirill Tkhai <ktkhai@virtuozzo.com> Tested-by: Kirill Tkhai <ktkhai@virtuozzo.com> Tested-by: Alexander Aring <aring@mojatatu.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-04-19net/smc: fix shutdown in state SMC_LISTENUrsula Braun
Calling shutdown with SHUT_RD and SHUT_RDWR for a listening SMC socket crashes, because commit 127f49705823 ("net/smc: release clcsock from tcp_listen_worker") releases the internal clcsock in smc_close_active() and sets smc->clcsock to NULL. For SHUT_RD the smc_close_active() call is removed. For SHUT_RDWR the kernel_sock_shutdown() call is omitted, since the clcsock is already released. Fixes: 127f49705823 ("net/smc: release clcsock from tcp_listen_worker") Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reported-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19bnxt_en: Fix memory fault in bnxt_ethtool_init()Vasundhara Volam
In some firmware images, the length of BNX_DIR_TYPE_PKG_LOG nvram type could be greater than the fixed buffer length of 4096 bytes allocated by the driver. This was causing HWRM_NVM_READ to copy more data to the buffer than the allocated size, causing general protection fault. Fix the issue by allocating the exact buffer length returned by HWRM_NVM_FIND_DIR_ENTRY, instead of 4096. Move the kzalloc() call into the bnxt_get_pkgver() function. Fixes: 3ebf6f0a09a2 ("bnxt_en: Add installed-package firmware version reporting via Ethtool GDRVINFO") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19Merge branch 'virtio-ctrl-buffer-fixes'David S. Miller
Michael S. Tsirkin says: ==================== virtio: ctrl buffer fixes Here are a couple of fixes related to the virtio control buffer. Lightly tested on x86 only. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19virtio_net: sparse annotation fixMichael S. Tsirkin
offloads is a buffer in virtio format, should use the __virtio64 tag. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19virtio_net: fix adding vids on big-endianMichael S. Tsirkin
Programming vids (adding or removing them) still passes guest-endian values in the DMA buffer. That's wrong if guest is big-endian and when virtio 1 is enabled. Note: this is on top of a previous patch: virtio_net: split out ctrl buffer Fixes: 9465a7a6f ("virtio_net: enable v1.0 support") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19virtio_net: split out ctrl bufferMichael S. Tsirkin
When sending control commands, virtio net sets up several buffers for DMA. The buffers are all part of the net device which means it's actually allocated by kvmalloc so it's in theory (on extreme memory pressure) possible to get a vmalloc'ed buffer which on some platforms means we can't DMA there. Fix up by moving the DMA buffers into a separate structure. Reported-by: Mikulas Patocka <mpatocka@redhat.com> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net: hns: Avoid action name truncationdann frazier
When longer interface names are used, the action names exposed in /proc/interrupts and /proc/irq/* maybe truncated. For example, when using the predictable name algorithm in systemd on a HiSilicon D05, I see: ubuntu@d05-3:~$ grep enahisic2i0-tx /proc/interrupts | sed 's/.* //' enahisic2i0-tx0 enahisic2i0-tx1 [...] enahisic2i0-tx8 enahisic2i0-tx9 enahisic2i0-tx1 enahisic2i0-tx1 enahisic2i0-tx1 enahisic2i0-tx1 enahisic2i0-tx1 enahisic2i0-tx1 Increase the max ring name length to allow for an interface name of IFNAMSIZE. After this change, I now see: $ grep enahisic2i0-tx /proc/interrupts | sed 's/.* //' enahisic2i0-tx0 enahisic2i0-tx1 enahisic2i0-tx2 [...] enahisic2i0-tx8 enahisic2i0-tx9 enahisic2i0-tx10 enahisic2i0-tx11 enahisic2i0-tx12 enahisic2i0-tx13 enahisic2i0-tx14 enahisic2i0-tx15 Signed-off-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19docs: ip-sysctl.txt: fix name of some ipv6 variablesOlivier Gayot
The name of the following proc/sysctl entries were incorrectly documented: /proc/sys/net/ipv6/conf/<interface>/max_dst_opts_number /proc/sys/net/ipv6/conf/<interface>/max_hbt_opts_number /proc/sys/net/ipv6/conf/<interface>/max_dst_opts_length /proc/sys/net/ipv6/conf/<interface>/max_hbt_length Their name was set to the name of the symbol in the .data field of the control table instead of their .proc name. Signed-off-by: Olivier Gayot <olivier.gayot@sigexec.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-04 03:53:14 +0000