| Age | Commit message (Collapse) | Author |
|---|
|
Add a helper to directly set the SO_LINGER sockopt from kernel space
with onoff set to true and a linger time of 0 without going through a
fake uaccess.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a helper to directly set the SO_REUSEADDR sockopt from kernel space
without going through a fake uaccess.
For this the iscsi target now has to formally depend on inet to avoid
a mostly theoretical compile failure. For actual operation it already
did depend on having ipv4 or ipv6 support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2020-05-26
Updates highlights:
1) From Vu Pham (8): Support VM traffics failover with bonded VF
representors and e-switch egress/ingress ACLs
This series introduce the support for Virtual Machine running I/O
traffic over direct/fast VF path and failing over to slower
paravirtualized path using the following features:
__________________________________
| VM _________________ |
| |FAILOVER device | |
| |________________| |
| | |
| ____|_____ |
| | | |
| ______ |___ ____|_______ |
| | VF PT | |VIRTIO-NET | |
| | device | | device | |
| |_________| |___________| |
|___________|______________|________|
| |
| HYPERVISOR |
| ____|______
| | macvtap |
| |virtio BE |
| |___________|
| |
| ____|_____
| |host VF |
| |_________|
| |
_____|______ _____|_____
| PT VF | | host VF |
|representor| |representor|
|___________| |___________|
\ /
\ /
\ /
\ / _________________
\_______/ | |
_______|________ | V-SWITCH |
|VF representors |________________| (OVS) |
| bond | |________________|
|________________| |
________|________
| Uplink |
| representor |
|_________________|
Summary:
--------
Problem statement:
------------------
Currently in above topology, when netfailover device is configured using
VFs and eswitch VF representors, and when traffic fails over to stand-by
VF which is exposed using macvtap device to guest VM, eswitch fails to
switch the traffic to the stand-by VF representor. This occurs because
there is no knowledge at eswitch level of the stand-by representor
device.
Solution:
---------
Using standard bonding driver, a bond netdevice is created over VF
representor device which is used for offloading tc rules.
Two VF representors are bonded together, one for the passthrough VF
device and another one for the stand-by VF device.
With this solution, mlx5 driver listens to the failover events
occuring at the bond device level to failover traffic to either of
the active VF representor of the bond.
a. VM with netfailover device of VF pass-thru (PT) device and virtio-net
paravirtualized device with same MAC-address to handle failover
traffics at VM level.
b. Host bond is active-standby mode, with the lower devices being the VM
VF PT representor, and the representor of the 2nd VF to handle
failover traffics at Hypervisor/V-Switch OVS level.
- During the steady state (fast datapath): set the bond active
device to be the VM PT VF representor.
- During failover: apply bond failover to the second VF representor
device which connects to the VM non-accelerated path.
c. E-Switch ingress/egress ACL tables to support failover traffics at
E-Switch level
I. E-Switch egress ACL with forward-to-vport rule:
- By default, eswitch vport egress acl forward packets to its
counterpart NIC vport.
- During port failover, the egress acl forward-to-vport rule will
be added to e-switch vport of passive/in-active slave VF
representor
to forward packets to other e-switch vport ie. the active slave
representor's e-switch vport to handle egress "failover"
traffics.
- Using lower change netdev event to detect a representor is a
lower
dev (slave) of bond and becomes active, adding egress acl
forward-to-vport rule of all other slave netdevs to forward to
this
representor's vport.
- Using upper change netdev event to detect a representor unslaving
from bond device to delete its vport's egress acl forward-to-vport
rule.
II. E-Switch ingress ACL metadata reg_c for match
- Bonded representors' vorts sharing tc block have the same
root ingress acl table and a unique metadata for match.
- Traffics from both representors's vports will be tagged with same
unique metadata reg_c.
- Using upper change netdev event to detect a representor
enslaving/unslaving from bond device to setup shared root ingress
acl and unique metadata.
2) From Alex Vesker (2): Slpit RX and TX lock for parallel rule insertion in
software steering
3) Eli Britstein (2): Optimize performance for IPv4/IPv6 ethertype use the HW
ip_version register rather than parsing eth frames for ethertype.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make tcp_ld_RTO_revert() helper available to IPv6, and
implement RFC 6069 :
Quoting this RFC :
3. Connectivity Disruption Indication
For Internet Protocol version 6 (IPv6) [RFC2460], the counterpart of
the ICMP destination unreachable message of code 0 (net unreachable)
and of code 1 (host unreachable) is the ICMPv6 destination
unreachable message of code 0 (no route to destination) [RFC4443].
As with IPv4, a router should generate an ICMPv6 destination
unreachable message of code 0 in response to a packet that cannot be
delivered to its destination address because it lacks a matching
entry in its routing table.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
SJA1105, being AVB/TSN switches, provide hardware assist for the
Credit-Based Shaper as described in the IEEE 8021Q-2018 document.
First generation has 10 shapers, freely assignable to any of the 4
external ports and 8 traffic classes, and second generation has 16
shapers.
The Credit-Based Shaper tables are accessed through the dynamic
reconfiguration interface, so we have to restore them manually after a
switch reset. The tables are backed up by the static config only on
P/Q/R/S, and we don't want to add custom code only for that family,
since the procedure that is in place now works for both.
Tested with the following commands:
data_rate_kbps=67000
port_transmit_rate_kbps=1000000
idleslope=$data_rate_kbps
sendslope=$(($idleslope - $port_transmit_rate_kbps))
locredit=$((-0x80000000))
hicredit=$((0x7fffffff))
tc qdisc add dev swp2 root handle 1: mqprio hw 0 num_tc 8 \
map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7
tc qdisc replace dev swp2 parent 1:1 cbs \
idleslope $idleslope \
sendslope $sendslope \
hicredit $hicredit \
locredit $locredit \
offload 1
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add Nik's torture tests as a new set to stress the replace and cleanup
paths.
Torture test created by Nikolay Aleksandrov and then I adapted to
selftest and added IPv6 version.
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If a UMEM is present on a queue when an interface/queue pair is being
enabled, the driver will try to prepare the Rx buffers in advance to
improve performance. However, if fill queue is shorter than HW Rx ring,
the driver will report failure after getting the last address from the
fill queue.
This still lets the driver process the packets correctly during the NAPI
poll, but leads to a constant NAPI rescheduling. Not allocating the
buffers in advance would result in a potential performance decrease.
Commit d57d76428ae9 ("xsk: Add API to check for available entries in FQ")
provides an API that lets drivers check the number of addresses that the
fill queue holds.
Notify the user if fill queue is not long enough to prepare all buffers
before packet processing starts, and allocate the buffers during the
NAPI poll. If the fill queue size is sufficient, prepare Rx buffers in
advance.
Signed-off-by: Krzysztof Kazimierczak <krzysztof.kazimierczak@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Change the locking flow to support RX and TX locks, splitting
the single lock to two will allow inserting rules in parallel
for RX and TX parts of the FDB.
Locking the dr_domain will be done by locking the RX domain
and the TX domain locks, this is mostly used for control operations
on the dr_domain. When inserting rules for RX or TX the single
nic_doamin RX or TX lock will be used. Splitting the lock is safe since
RX and TX domains are logically separated from each other, shared
objects such the send-ring and memory pool are protected by locks.
Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Adding this lock will allow writing steering entries without
locking the dr_domain and allow parallel insertion.
Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The HW is optimized for IPv4/IPv6. For such cases, pending capability,
avoid matching on ethertype, and use ip_version field instead.
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Set ethertype match in a helper function as a pre-step towards
optimizing it.
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Add mutex destroy calls to balance with mutex_init() done in the init
path.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Use change upper event to detect slave representor from
enslaving/unslaving to/from lag device.
On enslaving event, call mlx5_enslave_rep() API to create, add
this slave representor shadow entry to the slaves list of
bond_metadata structure representing master lag device and use
its metadata to setup ingress acl metadata header.
On unslaving event, resetting the vport of unslaved representor
to use its default ingress/egress acls and rx rules with its
default_metadata.
The last slave will free the shared bond_metadata and its
unique metadata.
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Bonded slave representors' vports must share a unique metadata
for match.
On enslaving event of slave representor to lag device, allocate
new unique "bond_metadata" for match if this is the first slave.
The subsequent enslaved representors will share the same unique
"bond_metadata".
On unslaving event of slave representor, reset the slave
representor's vport to use its own default metadata.
Replace ingress acl and rx rules of the slave representors' vports
using new vport->bond_metadata.
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Introduce infrastructure to create unique metadata for match
for vport without depending on vport_num. Vport uses its
default metadata for match in standalone configuration but
will share a different unique "bond_metadata" for match with
other vports in bond configuration.
Using ida to generate unique metadata for match for vports
in default and bond configurations.
Introduce APIs to generate, free metadata for match.
Introduce APIs to set vport's bond_metadata and replace its
ingress acl rules with bond_metatada.
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Adding bond_metadata and its slave entries to represent a lag device
and its slaves VF representors. Bond_metadata structure includes a
unique metadata shared by slaves VF respresentors, and a list of slaves
representors slave entries.
On enslaving event, create a bond_metadata structure representing
the upper lag device of this slave representor if it has not been
created yet. Create and add entry for the slave representor to the
slaves list.
On unslaving event, free the slave entry of the slave representor.
On the last unslave event, free the bond_metadata structure and its
resources.
Introduce APIs to create and remove bond_metadata and its resources,
enslave and unslave VF representor slave entries.
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When a bond device is created over one or more non uplink representors,
and when a flow rule is offloaded to such bond device, offload a rule
to the active lower device.
Assuming that this is active-backup lag, the rules should be offloaded
to the active lower device which is the representor of the direct
path (not the failover).
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Currently offloading a rule over a tc block shared by multiple
representors fails because an e-switch global hashtable to keep
the mapping from tc cookies to mlx5e flow instances is used, and
tc block sharing offloads the same rule/cookie multiple times,
each time for different representor sharing the tc block.
Changing the implementation and behavior by acknowledging and returning
success if the same rule/cookie is offloaded again to other slave
representor sharing the tc block by setting, checking and comparing
the netdev that added the rule first.
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Register a notifier block to handle netdev events for bond device
of non-uplink representors to support eswitch vports bonding.
When a non-uplink representor is a lower dev (slave) of bond and
becomes active, adding egress acl forward-to-vport rule of all slave
netdevs (active + standby) to forward to this representor's vport. Use
change lower netdev event to do this.
Use change upper event to detect slave representor unslaved from lag
device to delete its vport egress acl forward rule if any.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
By default, e-switch vport's egress acl just forward packets to its
counterpart NIC vport using existing egress acl table.
During port failover in bonding scenario where two VFs representors
are bonded, the egress acl forward-to-vport rule will be added to
the existing egress acl table of e-switch vport of passive/inactive
slave representor to forward packets to other NIC vport ie. the active
slave representor's NIC vport to handle egress "failover" traffic.
Enable egress acl and have APIs to create and destroy egress acl
forward-to-vport rule and group.
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Restructure the eswitch ingress acl codes into eswitch directory
and different files:
. Acl ingress helper functions to acl_helper.c/h
. Acl ingress functions used in offloads mode to acl_ingress_ofld.c
. Acl ingress functions used in legacy mode to acl_ingress_lgy.c
This patch does not change any functionality.
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
|
|
Refactor the egress acl codes so that offloads and legacy modes
can configure specifically their own needs of egress acl table,
groups and rules. While at it, restructure the eswitch egress
acl codes into eswitch directory and different files:
. Acl egress helper functions to acl_helper.c/h
. Acl egress functions used in offloads mode to acl_egress_ofld.c
. Acl egress functions used in legacy mode to acl_egress_lgy.c
This patch does not change any functionality.
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
We don't need both rx_status and rx_error parameters, as the latter is
a subset of the former. Remove rx_error completely and check the right bit
in rx_status.
Rename rx_status to rx_status0, and rx_status_err1 to
rx_status1. This naming more closely reflects the specification.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
When writing the driver's struct ice_tlan_ctx structure, do not write the
8-bit element int_q_state with the associated internal-to-hardware field
which is 122-bits, otherwise the helper function ice_write_byte() will use
undefined behavior when setting the mask used for that write. This should
not cause any functional change and will avoid use of undefined behavior.
Also, update a comment to highlight this structure element is not written.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
In current implementation number of XDP Tx queues is the same as
the number of transmit queues, which is not always true. This
patch changes this number to match the number of receive queues.
XDP programs are running on Rx rings, so what we actually need to
provide is the XDP Tx ring per each Rx ring so that the whole XDP
ecosystem is functional, e.g. if the result of XDP prog is XDP_TX
then you have the need to access the XDP Tx ring.
Signed-off-by: Marta Plantykow <marta.a.plantykow@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
When XDP Tx program is loaded and packets are sent from
interface, VSI statistics are not updated. This patch adds
packets sent on Tx XDP ring to VSI ring stats.
Signed-off-by: Marta Plantykow <marta.a.plantykow@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
When XDP Tx rings are destroyed the number of XDP Tx queues
is not changing. This patch is changing this number to 0.
Signed-off-by: Marta Plantykow <marta.a.plantykow@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
A race condition between FW and SW can occur between admin queue setup and
the first command sent. A link event may occur and FW attempts to notify a
non-existent queue. FW will set the critical error bit and disable the
queue. When this happens retry queue setup.
Signed-off-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Currently, if the PVID is set in the VLAN handling section of the VSI
context the driver still allows VLAN stripping to be enabled/disabled.
VLAN stripping should only be modifiable when the PVID is not set. Fix
this by preventing VLAN stripping modification when PVID is set.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Currently we are only including illegal_bytes and rx_crc_errors in the
PF netdev's rx_error counter. There are many more causes of Rx errors
that the device supports and reports via Ethtool. Accumulate all Rx
errors in the PF netdev's rx_error counter.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Handle memory leaks during control queue initialization and
buffer allocation failures. The macro ICE_FREE_CQ_BUFS is modified to
re-use for this fix.
Signed-off-by: Surabhi Boob <surabhi.boob@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Handle memory leak on filter management initialization failure.
Signed-off-by: Surabhi Boob <surabhi.boob@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The manage MAC write command was implemented in an overly complex way
that actually didn't work, as it wasn't symmetric to the manage MAC
read command, and was feeding bytes out of order to the firmware. Fix
the implementation by just using a simple array to represent the MAC
address when it is being written via firmware command.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Remove is_zero_ether_add() check when setting the VF default LAN address.
This check assumed that the address had been delete and zeroed before
calling ice_vc_add_mac_addr(). Now the default LAN address will be set
to the last unicast MAC address added by the VF.
The default LAN address is reported by the PF via ndo_get_vf_config.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The driver had an unused define that can be removed. Found by
compiler -Werror=unused-macros check.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Fix the remaining signed vs unsigned issues, which appear
when compiling with -Werror=sign-compare.
Many of these are because there is an external interface that is passing
an int to us (which we can't change) but that we (rightfully) store
and compare against as an unsigned in our data structures.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Christoph Hellwig says:
====================
remove kernel_getsockopt
this series reduces scope from the last round and just removes
kernel_getsockopt to avoid conflicting with the sctp cleanup series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No users left.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The only difference between a few missing fixes applied to the SCTP
one is that TCP uses ->getpeername to get the remote address, while
SCTP uses kernel_getsockopt(.. SCTP_PRIMARY_ADDR). But given that
getpeername is defined to return the primary address for sctp, there
doesn't seem to be any reason for the different way of quering the
peername, or all the code duplication.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
change typo in function name "nofity" to "notify"
sctp_ulpevent_nofity_peer_addr_change ->
sctp_ulpevent_notify_peer_addr_change
Signed-off-by: Jonas Falkevik <jonas.falkevik@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds a field to the tls rx offload context which enables
drivers to force a send_resync call.
This field can be used by drivers to request a resync at the next
possible tls record. It is beneficial for hardware that provides the
resync sequence number asynchronously. In such cases, the packet that
triggered the resync does not contain the information required for a
resync. Instead, the driver requests resync for all the following
TLS record until the asynchronous notification with the resync request
TCP sequence arrives.
A following series for mlx5e ConnectX-6DX TLS RX offload support will
use this mechanism.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cong Wang says:
====================
net_sched: reduce the number of qdisc resets
This patchset aims to reduce the number of qdisc resets during
qdisc tear down. Patch 1~3 are preparation for their following
patches, especially patch 2 and patch 3 add a few tracepoints
so that we can observe the whole lifetime of qdisc's. Patch 4
and patch 5 are the ones do the actual work. Please find more
details in each patch description.
Vaclav Zindulka tested this patchset and his large ruleset with
over 13k qdiscs defined got from 22s to 520ms.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Resetting old qdisc on dev_queue->qdisc_sleeping in
dev_qdisc_reset() is redundant, because this qdisc,
even if not same with dev_queue->qdisc, is reset via
qdisc_put() right after calling dev_graft_qdisc() when
hitting refcnt 0.
This is very easy to observe with qdisc_reset() tracepoint
and stack traces.
Reported-by: Václav Zindulka <vaclav.zindulka@tlapnet.cz>
Tested-by: Václav Zindulka <vaclav.zindulka@tlapnet.cz>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Except for sch_mq and sch_mqprio, each dev queue points to the
same root qdisc, so when we reset the dev queues with
netdev_for_each_tx_queue() we end up resetting the same instance
of the root qdisc for multiple times.
Avoid this by checking the __QDISC_STATE_DEACTIVATED bit in
each iteration, so for sch_mq/sch_mqprio, we still reset all
of them like before, for the rest, we only reset it once.
Reported-by: Václav Zindulka <vaclav.zindulka@tlapnet.cz>
Tested-by: Václav Zindulka <vaclav.zindulka@tlapnet.cz>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With this tracepoint, we could know when qdisc's are created,
especially those default qdisc's.
Sample output:
tc-736 [001] ...1 56.230107: qdisc_create: dev=ens3 kind=pfifo parent=1:0
tc-736 [001] ...1 56.230113: qdisc_create: dev=ens3 kind=hfsc parent=ffff:ffff
tc-738 [001] ...1 56.256816: qdisc_create: dev=ens3 kind=pfifo parent=1:100
tc-739 [001] ...1 56.267584: qdisc_create: dev=ens3 kind=pfifo parent=1:200
tc-740 [001] ...1 56.279649: qdisc_create: dev=ens3 kind=fq_codel parent=1:100
tc-741 [001] ...1 56.289996: qdisc_create: dev=ens3 kind=pfifo_fast parent=1:200
tc-745 [000] .N.1 111.687483: qdisc_create: dev=ens3 kind=ingress parent=ffff:fff1
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add two tracepoints for qdisc_reset() and qdisc_destroy() to track
qdisc resetting and destroying.
Sample output:
tc-756 [000] ...3 138.355662: qdisc_reset: dev=ens3 kind=pfifo_fast parent=ffff:ffff handle=0:0
tc-756 [000] ...1 138.355720: qdisc_reset: dev=ens3 kind=pfifo_fast parent=ffff:ffff handle=0:0
tc-756 [000] ...1 138.355867: qdisc_reset: dev=ens3 kind=pfifo_fast parent=ffff:ffff handle=0:0
tc-756 [000] ...1 138.355930: qdisc_destroy: dev=ens3 kind=pfifo_fast parent=ffff:ffff handle=0:0
tc-757 [000] ...2 143.073780: qdisc_reset: dev=ens3 kind=fq_codel parent=ffff:ffff handle=8001:0
tc-757 [000] ...1 143.073878: qdisc_reset: dev=ens3 kind=fq_codel parent=ffff:ffff handle=8001:0
tc-757 [000] ...1 143.074114: qdisc_reset: dev=ens3 kind=fq_codel parent=ffff:ffff handle=8001:0
tc-757 [000] ...1 143.074228: qdisc_destroy: dev=ens3 kind=fq_codel parent=ffff:ffff handle=8001:0
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
qdisc_destroy() calls ops->reset() and cleans up qdisc->gso_skb
and qdisc->skb_bad_txq, these are nearly same with qdisc_reset(),
so just call it directly, and cosolidate the code for the next
patch.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No element named "client" exists within "struct ipa_endpoint".
It might be a heritage forgotten to be removed. Delete it now.
Signed-off-by: Wang Wenhu <wenhu.wang@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change "transactio" -> "transaction". Also an alignment correction.
Signed-off-by: Wang Wenhu <wenhu.wang@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eric Dumazet says:
====================
tcp: tcp_v4_err() cleanups
This series is a followup of patch 239174945dac ("tcp: tcp_v4_err() icmp
skb is named icmp_skb").
Move the RFC 6069 code into a helper, and rename icmp_skb to standard
skb name so that tcp_v4_err() and tcp_v6_err() are using consistent names.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
