summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2020-09-08tools/libbpf: Avoid counting local symbols in ABI checkTony Ambardar
Encountered the following failure building libbpf from kernel 5.8.5 sources with GCC 8.4.0 and binutils 2.34: (long paths shortened) Warning: Num of global symbols in sharedobjs/libbpf-in.o (234) does NOT match with num of versioned symbols in libbpf.so (236). Please make sure all LIBBPF_API symbols are versioned in libbpf.map. --- libbpf_global_syms.tmp 2020-09-02 07:30:58.920084380 +0000 +++ libbpf_versioned_syms.tmp 2020-09-02 07:30:58.924084388 +0000 @@ -1,3 +1,5 @@ +_fini +_init bpf_btf_get_fd_by_id bpf_btf_get_next_id bpf_create_map make[4]: *** [Makefile:210: check_abi] Error 1 Investigation shows _fini and _init are actually local symbols counted amongst global ones: $ readelf --dyn-syms --wide libbpf.so|head -10 Symbol table '.dynsym' contains 343 entries: Num: Value Size Type Bind Vis Ndx Name 0: 00000000 0 NOTYPE LOCAL DEFAULT UND 1: 00004098 0 SECTION LOCAL DEFAULT 11 2: 00004098 8 FUNC LOCAL DEFAULT 11 _init@@LIBBPF_0.0.1 3: 00023040 8 FUNC LOCAL DEFAULT 14 _fini@@LIBBPF_0.0.1 4: 00000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.0.4 5: 00000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.0.1 6: 0000ffa4 8 FUNC GLOBAL DEFAULT 12 bpf_object__find_map_by_offset@@LIBBPF_0.0.1 A previous commit filtered global symbols in sharedobjs/libbpf-in.o. Do the same with the libbpf.so DSO for consistent comparison. Fixes: 306b267cb3c4 ("libbpf: Verify versioned symbols") Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200905214831.1565465-1-Tony.Ambardar@gmail.com
2020-09-08bpf: Fix clobbering of r2 in bpf_gen_ld_absDaniel Borkmann
Bryce reported that he saw the following with: 0: r6 = r1 1: r1 = 12 2: r0 = *(u16 *)skb[r1] The xlated sequence was incorrectly clobbering r2 with pointer value of r6 ... 0: (bf) r6 = r1 1: (b7) r1 = 12 2: (bf) r1 = r6 3: (bf) r2 = r1 4: (85) call bpf_skb_load_helper_16_no_cache#7692160 ... and hence call to the load helper never succeeded given the offset was too high. Fix it by reordering the load of r6 to r1. Other than that the insn has similar calling convention than BPF helpers, that is, r0 - r5 are scratch regs, so nothing else affected after the insn. Fixes: e0cea7ce988c ("bpf: implement ld_abs/ld_ind in native bpf") Reported-by: Bryce Kahle <bryce.kahle@datadoghq.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/cace836e4d07bb63b1a53e49c5dfb238a040c298.1599512096.git.daniel@iogearbox.net
2020-09-03Merge branch 'hashmap_iter_bucket_lock_fix'Alexei Starovoitov
Yonghong Song says: ==================== Currently, the bpf hashmap iterator takes a bucket_lock, a spin_lock, before visiting each element in the bucket. This will cause a deadlock if a map update/delete operates on an element with the same bucket id of the visited map. To avoid the deadlock, let us just use rcu_read_lock instead of bucket_lock. This may result in visiting stale elements, missing some elements, or repeating some elements, if concurrent map delete/update happens for the same map. I think using rcu_read_lock is a reasonable compromise. For users caring stale/missing/repeating element issues, bpf map batch access syscall interface can be used. Note that another approach is during bpf_iter link stage, we check whether the iter program might be able to do update/delete to the visited map. If it is, reject the link_create. Verifier needs to record whether an update/delete operation happens for each map for this approach. I just feel this checking is too specialized, hence still prefer rcu_read_lock approach. Patch #1 has the kernel implementation and Patch #2 added a selftest which can trigger deadlock without Patch #1. ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-09-03selftests/bpf: Add bpf_{update, delete}_map_elem in hashmap iter programYonghong Song
Added bpf_{updata,delete}_map_elem to the very map element the iter program is visiting. Due to rcu protection, the visited map elements, although stale, should still contain correct values. $ ./test_progs -n 4/18 #4/18 bpf_hash_map:OK #4 bpf_iter:OK Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200902235341.2001534-1-yhs@fb.com
2020-09-03bpf: Do not use bucket_lock for hashmap iteratorYonghong Song
Currently, for hashmap, the bpf iterator will grab a bucket lock, a spinlock, before traversing the elements in the bucket. This can ensure all bpf visted elements are valid. But this mechanism may cause deadlock if update/deletion happens to the same bucket of the visited map in the program. For example, if we added bpf_map_update_elem() call to the same visited element in selftests bpf_iter_bpf_hash_map.c, we will have the following deadlock: ============================================ WARNING: possible recursive locking detected 5.9.0-rc1+ #841 Not tainted -------------------------------------------- test_progs/1750 is trying to acquire lock: ffff9a5bb73c5e70 (&htab->buckets[i].raw_lock){....}-{2:2}, at: htab_map_update_elem+0x1cf/0x410 but task is already holding lock: ffff9a5bb73c5e20 (&htab->buckets[i].raw_lock){....}-{2:2}, at: bpf_hash_map_seq_find_next+0x94/0x120 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&htab->buckets[i].raw_lock); lock(&htab->buckets[i].raw_lock); *** DEADLOCK *** ... Call Trace: dump_stack+0x78/0xa0 __lock_acquire.cold.74+0x209/0x2e3 lock_acquire+0xba/0x380 ? htab_map_update_elem+0x1cf/0x410 ? __lock_acquire+0x639/0x20c0 _raw_spin_lock_irqsave+0x3b/0x80 ? htab_map_update_elem+0x1cf/0x410 htab_map_update_elem+0x1cf/0x410 ? lock_acquire+0xba/0x380 bpf_prog_ad6dab10433b135d_dump_bpf_hash_map+0x88/0xa9c ? find_held_lock+0x34/0xa0 bpf_iter_run_prog+0x81/0x16e __bpf_hash_map_seq_show+0x145/0x180 bpf_seq_read+0xff/0x3d0 vfs_read+0xad/0x1c0 ksys_read+0x5f/0xe0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ... The bucket_lock first grabbed in seq_ops->next() called by bpf_seq_read(), and then grabbed again in htab_map_update_elem() in the bpf program, causing deadlocks. Actually, we do not need bucket_lock here, we can just use rcu_read_lock() similar to netlink iterator where the rcu_read_{lock,unlock} likes below: seq_ops->start(): rcu_read_lock(); seq_ops->next(): rcu_read_unlock(); /* next element */ rcu_read_lock(); seq_ops->stop(); rcu_read_unlock(); Compared to old bucket_lock mechanism, if concurrent updata/delete happens, we may visit stale elements, miss some elements, or repeat some elements. I think this is a reasonable compromise. For users wanting to avoid stale, missing/repeated accesses, bpf_map batch access syscall interface can be used. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200902235340.2001375-1-yhs@fb.com
2020-09-03libbpf: Remove arch-specific include path in MakefileNaveen N. Rao
Ubuntu mainline builds for ppc64le are failing with the below error (*): CALL /home/kernel/COD/linux/scripts/atomic/check-atomics.sh DESCEND bpf/resolve_btfids Auto-detecting system features: ... libelf: [ [32mon[m ] ... zlib: [ [32mon[m ] ... bpf: [ [31mOFF[m ] BPF API too old make[6]: *** [Makefile:295: bpfdep] Error 1 make[5]: *** [Makefile:54: /home/kernel/COD/linux/debian/build/build-generic/tools/bpf/resolve_btfids//libbpf.a] Error 2 make[4]: *** [Makefile:71: bpf/resolve_btfids] Error 2 make[3]: *** [/home/kernel/COD/linux/Makefile:1890: tools/bpf/resolve_btfids] Error 2 make[2]: *** [/home/kernel/COD/linux/Makefile:335: __build_one_by_one] Error 2 make[2]: Leaving directory '/home/kernel/COD/linux/debian/build/build-generic' make[1]: *** [Makefile:185: __sub-make] Error 2 make[1]: Leaving directory '/home/kernel/COD/linux' resolve_btfids needs to be build as a host binary and it needs libbpf. However, libbpf Makefile hardcodes an include path utilizing $(ARCH). This results in mixing of cross-architecture headers resulting in a build failure. The specific header include path doesn't seem necessary for a libbpf build. Hence, remove the same. (*) https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.9-rc3/ppc64el/log Reported-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200902084246.1513055-1-naveen.n.rao@linux.vnet.ibm.com
2020-09-01tools/bpf: build: Make sure resolve_btfids cleans up after itselfToke Høiland-Jørgensen
The new resolve_btfids tool did not clean up the feature detection folder on 'make clean', and also was not called properly from the clean rule in tools/make/ folder on its 'make clean'. This lead to stale objects being left around, which could cause feature detection to fail on subsequent builds. Fixes: fbbb68de80a4 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/bpf/20200901144343.179552-1-toke@redhat.com
2020-08-31libbpf: Fix build failure from uninitialized variable warningTony Ambardar
While compiling libbpf, some GCC versions (at least 8.4.0) have difficulty determining control flow and a emit warning for potentially uninitialized usage of 'map', which results in a build error if using "-Werror": In file included from libbpf.c:56: libbpf.c: In function '__bpf_object__open': libbpf_internal.h:59:2: warning: 'map' may be used uninitialized in this function [-Wmaybe-uninitialized] libbpf_print(level, "libbpf: " fmt, ##__VA_ARGS__); \ ^~~~~~~~~~~~ libbpf.c:5032:18: note: 'map' was declared here struct bpf_map *map, *targ_map; ^~~ The warning/error is false based on code inspection, so silence it with a NULL initialization. Fixes: 646f02ffdd49 ("libbpf: Add BTF-defined map-in-map support") Reference: 063e68813391 ("libbpf: Fix false uninitialized variable warning") Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200831000304.1696435-1-Tony.Ambardar@gmail.com
2020-08-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2020-08-28 The following pull-request contains BPF updates for your *net* tree. We've added 4 non-merge commits during the last 4 day(s) which contain a total of 4 files changed, 7 insertions(+), 4 deletions(-). The main changes are: 1) Fix out of bounds access for BPF_OBJ_GET_INFO_BY_FD retrieval, from Yonghong Song. 2) Fix wrong __user annotation in bpf_stats sysctl handler, from Tobias Klauser. 3) Few fixes for BPF selftest scripting in test_{progs,maps}, from Jesper Dangaard Brouer. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28net_sched: fix error path in red_init()Cong Wang
When ->init() fails, ->destroy() is called to clean up. So it is unnecessary to clean up in red_init(), and it would cause some refcount underflow. Fixes: aee9caa03fc3 ("net: sched: sch_red: Add qevents "early_drop" and "mark"") Reported-and-tested-by: syzbot+b33c1cb0a30ebdc8a5f9@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+e5ea5f8a3ecfd4427a1c@syzkaller.appspotmail.com Cc: Petr Machata <petrm@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28net: dsa: mt7530: fix advertising unsupported 1000baseT_HalfLanden Chao
Remove 1000baseT_Half to advertise correct hardware capability in phylink_validate() callback function. Fixes: 38f790a80560 ("net: dsa: mt7530: Add support for port 5") Signed-off-by: Landen Chao <landen.chao@mediatek.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28netlink: fix a data race in netlink_rcv_wake()zhudi
The data races were reported by KCSAN: BUG: KCSAN: data-race in netlink_recvmsg / skb_queue_tail write (marked) to 0xffff8c0986e5a8c8 of 8 bytes by interrupt on cpu 3: skb_queue_tail+0xcc/0x120 __netlink_sendskb+0x55/0x80 netlink_broadcast_filtered+0x465/0x7e0 nlmsg_notify+0x8f/0x120 rtnl_notify+0x8e/0xb0 __neigh_notify+0xf2/0x120 neigh_update+0x927/0xde0 arp_process+0x8a3/0xf50 arp_rcv+0x27c/0x3b0 __netif_receive_skb_core+0x181c/0x1840 __netif_receive_skb+0x38/0xf0 netif_receive_skb_internal+0x77/0x1c0 napi_gro_receive+0x1bd/0x1f0 e1000_clean_rx_irq+0x538/0xb20 [e1000] e1000_clean+0x5e4/0x1340 [e1000] net_rx_action+0x310/0x9d0 __do_softirq+0xe8/0x308 irq_exit+0x109/0x110 do_IRQ+0x7f/0xe0 ret_from_intr+0x0/0x1d 0xffffffffffffffff read to 0xffff8c0986e5a8c8 of 8 bytes by task 1463 on cpu 0: netlink_recvmsg+0x40b/0x820 sock_recvmsg+0xc9/0xd0 ___sys_recvmsg+0x1a4/0x3b0 __sys_recvmsg+0x86/0x120 __x64_sys_recvmsg+0x52/0x70 do_syscall_64+0xb5/0x360 entry_SYSCALL_64_after_hwframe+0x65/0xca 0xffffffffffffffff Since the write is under sk_receive_queue->lock but the read is done as lockless. so fix it by using skb_queue_empty_lockless() instead of skb_queue_empty() for the read in netlink_rcv_wake() Signed-off-by: zhudi <zhudi21@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28Merge tag 'mac80211-for-davem-2020-08-28' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== We have: * fixes for AQL (airtime queue limits) * reduce packet loss detection false positives * a small channel number fix for the 6 GHz band * a fix for 80+80/160 MHz negotiation * an nl80211 attribute (NL80211_ATTR_HE_6GHZ_CAPABILITY) fix * add a missing sanity check for the regulatory code ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-28selftests/bpf: Fix massive output from test_mapsJesper Dangaard Brouer
When stdout output from the selftests tool 'test_maps' gets redirected into e.g file or pipe, then the output lines increase a lot (from 21 to 33949 lines). This is caused by the printf that happens before the fork() call, and there are user-space buffered printf data that seems to be duplicated into the forked process. To fix this fflush() stdout before the fork loop in __run_parallel(). Fixes: 1a97cf1fe503 ("selftests/bpf: speedup test_maps") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/159842985651.1050885.2154399297503372406.stgit@firesoul
2020-08-27rxrpc: Fix memory leak in rxkad_verify_response()Dinghao Liu
Fix a memory leak in rxkad_verify_response() whereby the response buffer doesn't get freed if we fail to allocate a ticket buffer. Fixes: ef68622da9cc ("rxrpc: Handle temporary errors better in rxkad security") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27Merge tag 'rxrpc-fixes-20200820' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc, afs: Fix probing issues Here are some fixes for rxrpc and afs to fix issues in the RTT measuring in rxrpc and thence the Volume Location server probing in afs: (1) Move the serial number of a received ACK into a local variable to simplify the next patch. (2) Fix the loss of RTT samples due to extra interposed ACKs causing baseline information to be discarded too early. This is a particular problem for afs when it sends a single very short call to probe a server it hasn't talked to recently. (3) Fix rxrpc_kernel_get_srtt() to indicate whether it actually has seen any valid samples or not. (4) Remove a field that's set/woken, but never read/waited on. (5) Expose the RTT and other probe information through procfs to make debugging of this stuff easier. (6) Fix VL rotation in afs to only use summary information from VL probing and not the probe running state (which gets clobbered when next a probe is issued). (7) Fix VL rotation to actually return the error aggregated from the probe errors. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27net: ethernet: ti: cpsw_new: fix error handling in cpsw_ndo_vlan_rx_kill_vid()Murali Karicheri
This patch fixes a bunch of issues in cpsw_ndo_vlan_rx_kill_vid() - pm_runtime_get_sync() returns non zero value. This results in non zero value return to caller which will be interpreted as error. So overwrite ret with zero. - If VID matches with port VLAN VID, then set error code. - Currently when VLAN interface is deleted, all of the VLAN mc addresses are removed from ALE table, however the return values from ale function calls are not checked. These functions can return error code -ENOENT. But that shouldn't happen in a normal case. So add error print to catch the situations so that these can be investigated and addressed. return zero in these cases as these are not real error case, but only serve to catch ALE table update related issues and help address the same in the driver. Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27net: Fix some commentsMiaohe Lin
Fix some comments, including wrong function name, duplicated word and so on. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27net: usb: Fix uninit-was-stored issue in asix_read_phy_addr()Himadri Pandya
The buffer size is 2 Bytes and we expect to receive the same amount of data. But sometimes we receive less data and run into uninit-was-stored issue upon read. Hence modify the error check on the return value to match with the buffer size as a prevention. Reported-and-tested by: syzbot+a7e220df5a81d1ab400e@syzkaller.appspotmail.com Signed-off-by: Himadri Pandya <himadrispandya@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27cfg80211: Adjust 6 GHz frequency to channel conversionAmar Singhal
Adjust the 6 GHz frequency to channel conversion function, the other way around was previously handled. Signed-off-by: Amar Singhal <asinghal@codeaurora.org> Link: https://lore.kernel.org/r/1592599921-10607-1-git-send-email-asinghal@codeaurora.org [rewrite commit message, hard-code channel 2] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-27mac80211: reduce packet loss event false positivesFelix Fietkau
When running a large number of packets per second with a high data rate and long A-MPDUs, the packet loss threshold can be reached very quickly when the link conditions change. This frequently shows up as spurious disconnects. Mitigate false positives by using a similar logic for regular stations as the one being used for TDLS, though with a more aggressive timeout. Packet loss events are only reported if no ACK was received for a second. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200808172542.41628-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-27cfg80211: regulatory: reject invalid hintsJohannes Berg
Reject invalid hints early in order to not cause a kernel WARN later if they're restored to or similar. Reported-by: syzbot+d451401ffd00a60677ee@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=d451401ffd00a60677ee Link: https://lore.kernel.org/r/20200819084648.13956-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-27wireless: fix wrong 160/80+80 MHz settingShay Bar
Fix cfg80211_chandef_usable(): consider IEEE80211_VHT_CAP_EXT_NSS_BW when verifying 160/80+80 MHz. Based on: "Table 9-272 — Setting of the Supported Channel Width Set subfield and Extended NSS BW Support subfield at a STA transmitting the VHT Capabilities Information field" From "Draft P802.11REVmd_D3.0.pdf" Signed-off-by: Aviad Brikman <aviad.brikman@celeno.com> Signed-off-by: Shay Bar <shay.bar@celeno.com> Link: https://lore.kernel.org/r/20200826143139.25976-1-shay.bar@celeno.com [reformat the code a bit and use u32_get_bits()] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-27mac80211: improve AQL aggregation estimation for low data ratesFelix Fietkau
Links with low data rates use much smaller aggregates and are much more sensitive to latency added by bufferbloat. Tune the assumed aggregation length based on the tx rate duration. Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20200821163045.62140-3-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-27mac80211: factor out code to look up the average packet length duration for ↵Felix Fietkau
a rate This will be used to enhance AQL estimated aggregation length Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20200821163045.62140-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-27mac80211: use rate provided via status->rate on ieee80211_tx_status_ext for AQLFelix Fietkau
Since ieee80211_tx_info does not have enough room to encode HE rates, HE drivers use status->rate to provide rate info. Store it in struct sta_info and use it for AQL. Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20200821163045.62140-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-26Merge branch 'net-fix-netpoll-crash-with-bnxt'David S. Miller
Jakub Kicinski says: ==================== net: fix netpoll crash with bnxt Rob run into crashes when using XDP on bnxt. Upon investigation it turns out that during driver reconfig irq core produces a warning message when IRQs are requested. This triggers netpoll, which in turn accesses uninitialized driver state. Same crash can also be triggered on this platform by changing the number of rings. Looks like we have two missing pieces here, netif_napi_add() has to make sure we start out with netpoll blocked. The driver also has to be more careful about when napi gets enabled. Tested XDP and channel count changes, the warning message no longer causes a crash. Not sure if the memory barriers added in patch 1 are necessary, but it seems we should have them. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt: don't enable NAPI until rings are readyJakub Kicinski
Netpoll can try to poll napi as soon as napi_enable() is called. It crashes trying to access a doorbell which is still NULL: BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 59 PID: 6039 Comm: ethtool Kdump: loaded Tainted: G S 5.9.0-rc1-00469-g5fd99b5d9950-dirty #26 RIP: 0010:bnxt_poll+0x121/0x1c0 Code: c4 20 44 89 e0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 41 8b 86 a0 01 00 00 41 23 85 18 01 00 00 49 8b 96 a8 01 00 00 0d 00 00 00 24 <89> 02 41 f6 45 77 02 74 cb 49 8b ae d8 01 00 00 31 c0 c7 44 24 1a netpoll_poll_dev+0xbd/0x1a0 __netpoll_send_skb+0x1b2/0x210 netpoll_send_udp+0x2c9/0x406 write_ext_msg+0x1d7/0x1f0 console_unlock+0x23c/0x520 vprintk_emit+0xe0/0x1d0 printk+0x58/0x6f x86_vector_activate.cold+0xf/0x46 __irq_domain_activate_irq+0x50/0x80 __irq_domain_activate_irq+0x32/0x80 __irq_domain_activate_irq+0x32/0x80 irq_domain_activate_irq+0x25/0x40 __setup_irq+0x2d2/0x700 request_threaded_irq+0xfb/0x160 __bnxt_open_nic+0x3b1/0x750 bnxt_open_nic+0x19/0x30 ethtool_set_channels+0x1ac/0x220 dev_ethtool+0x11ba/0x2240 dev_ioctl+0x1cf/0x390 sock_do_ioctl+0x95/0x130 Reported-by: Rob Sherwood <rsher@fb.com> Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26net: disable netpoll on fresh napisJakub Kicinski
napi_disable() makes sure to set the NAPI_STATE_NPSVC bit to prevent netpoll from accessing rings before init is complete. However, the same is not done for fresh napi instances in netif_napi_add(), even though we expect NAPI instances to be added as disabled. This causes crashes during driver reconfiguration (enabling XDP, changing the channel count) - if there is any printk() after netif_napi_add() but before napi_enable(). To ensure memory ordering is correct we need to use RCU accessors. Reported-by: Rob Sherwood <rsher@fb.com> Fixes: 2d8bff12699a ("netpoll: Close race condition between poll_one_napi and napi_disable") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26ipv4: Silence suspicious RCU usage warningIdo Schimmel
fib_info_notify_update() is always called with RTNL held, but not from an RCU read-side critical section. This leads to the following warning [1] when the FIB table list is traversed with hlist_for_each_entry_rcu(), but without a proper lockdep expression. Since modification of the list is protected by RTNL, silence the warning by adding a lockdep expression which verifies RTNL is held. [1] ============================= WARNING: suspicious RCU usage 5.9.0-rc1-custom-14233-g2f26e122d62f #129 Not tainted ----------------------------- net/ipv4/fib_trie.c:2124 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/834: #0: ffffffff85a3b6b0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0 stack backtrace: CPU: 0 PID: 834 Comm: ip Not tainted 5.9.0-rc1-custom-14233-g2f26e122d62f #129 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x100/0x184 lockdep_rcu_suspicious+0x143/0x14d fib_info_notify_update+0x8d1/0xa60 __nexthop_replace_notify+0xd2/0x290 rtm_new_nexthop+0x35e2/0x5946 rtnetlink_rcv_msg+0x4f7/0xbd0 netlink_rcv_skb+0x17a/0x480 rtnetlink_rcv+0x22/0x30 netlink_unicast+0x5ae/0x890 netlink_sendmsg+0x98a/0xf40 ____sys_sendmsg+0x879/0xa00 ___sys_sendmsg+0x122/0x190 __sys_sendmsg+0x103/0x1d0 __x64_sys_sendmsg+0x7d/0xb0 do_syscall_64+0x32/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fde28c3be57 Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 RSP: 002b:00007ffc09330028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fde28c3be57 RDX: 0000000000000000 RSI: 00007ffc09330090 RDI: 0000000000000003 RBP: 000000005f45f911 R08: 0000000000000001 R09: 00007ffc0933012c R10: 0000000000000076 R11: 0000000000000246 R12: 0000000000000001 R13: 00007ffc09330290 R14: 00007ffc09330eee R15: 00005610e48ed020 Fixes: 1bff1a0c9bbd ("ipv4: Add function to send route updates") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26drivers/net/wan/lapbether: Set network_header before transmittingXie He
Set the skb's network_header before it is passed to the underlying Ethernet device for transmission. This patch fixes the following issue: When we use this driver with AF_PACKET sockets, there would be error messages of: protocol 0805 is buggy, dev (Ethernet interface name) printed in the system "dmesg" log. This is because skbs passed down to the Ethernet device for transmission don't have their network_header properly set, and the dev_queue_xmit_nit function in net/core/dev.c complains about this. Reason of setting the network_header to this place (at the end of the Ethernet header, and at the beginning of the Ethernet payload): Because when this driver receives an skb from the Ethernet device, the network_header is also set at this place. Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26mptcp: free acked data before waiting for more memoryFlorian Westphal
After subflow lock is dropped, more wmem might have been made available. This fixes a deadlock in mptcp_connect.sh 'mmap' mode: wmem is exhausted. But as the mptcp socket holds on to already-acked data (for retransmit) no wakeup will occur. Using 'goto restart' calls mptcp_clean_una(sk) which will free pages that have been acked completely in the mean time. Fixes: fb529e62d3f3 ("mptcp: break and restart in case mptcp sndbuf is full") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26taprio: Fix using wrong queues in gate maskVinicius Costa Gomes
Since commit 9c66d1564676 ("taprio: Add support for hardware offloading") there's a bit of inconsistency when offloading schedules to the hardware: In software mode, the gate masks are specified in terms of traffic classes, so if say "sched-entry S 03 20000", it means that the traffic classes 0 and 1 are open for 20us; when taprio is offloaded to hardware, the gate masks are specified in terms of hardware queues. The idea here is to fix hardware offloading, so schedules in hardware and software mode have the same behavior. What's needed to do is to map traffic classes to queues when applying the offload to the driver. Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26net: cdc_ncm: Fix build errorYueHaibing
If USB_NET_CDC_NCM is y and USB_NET_CDCETHER is m, build fails: drivers/net/usb/cdc_ncm.o:(.rodata+0x1d8): undefined reference to `usbnet_cdc_update_filter' Select USB_NET_CDCETHER for USB_NET_CDC_NCM to fix this. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: e10dcb1b6ba7 ("net: cdc_ncm: hook into set_rx_mode to admit multicast traffic") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26net: hns3: Fix for geneve tx checksum bugYi Li
when skb->encapsulation is 0, skb->ip_summed is CHECKSUM_PARTIAL and it is udp packet, which has a dest port as the IANA assigned. the hardware is expected to do the checksum offload, but the hardware will not do the checksum offload when udp dest port is 6081. This patch fixes it by doing the checksum in software. Reported-by: Li Bing <libing@winhong.com> Signed-off-by: Yi Li <yili@winhong.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26Merge branch 'bnxt_en-Bug-fixes'David S. Miller
Michael Chan says: ==================== bnxt_en: Bug fixes. This set of driver patches include bug fixes for ethtool get channels, ethtool statistics, ethtool NVRAM, AER recovery, a firmware reset issue that could potentially crash, hwmon temperature reporting issue on VF, and 2 fixes for regressions introduced by the recent user-defined RSS map feature. Please queue patches 1 to 6 for -stable. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt_en: Setup default RSS map in all scenarios.Michael Chan
The recent changes to support user-defined RSS map assume that RX rings are always reserved and the default RSS map is set after the RX rings are successfully reserved. If the firmware spec is older than 1.6.1, no ring reservations are required and the default RSS map is not setup at all. In another scenario where the fw Resource Manager is older, RX rings are not reserved and we also end up with no valid RSS map. Fix both issues in bnxt_need_reserve_rings(). In both scenarios described above, we don't need to reserve RX rings so we need to call this new function bnxt_check_rss_map_no_rmgr() to setup the default RSS map when needed. Without valid RSS map, the NIC won't receive packets properly. Fixes: 1667cbf6a4eb ("bnxt_en: Add logical RSS indirection table structure.") Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt_en: init RSS table for Minimal-Static VF reservationEdwin Peer
There are no VF rings available during probe when the device is configured using the Minimal-Static reservation strategy. In this case, the RSS indirection table can only be initialized later, during bnxt_open_nic(). However, this was not happening because the rings will already have been reserved via bnxt_init_dflt_ring_mode(), causing bnxt_need_reserve_rings() to return false in bnxt_reserve_rings() and bypass the RSS table init. Solve this by pushing the call to bnxt_set_dflt_rss_indir_tbl() into __bnxt_reserve_rings(), which is common to both paths and is called whenever ring configuration is changed. After doing this, the RSS table init that must be called from bnxt_init_one() happens implicitly via bnxt_set_default_rings(), necessitating doing the allocation earlier in order to avoid a null pointer dereference. Fixes: bd3191b5d87d ("bnxt_en: Implement ethtool -X to set indirection table.") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt_en: fix HWRM error when querying VF temperatureEdwin Peer
Firmware returns RESOURCE_ACCESS_DENIED for HWRM_TEMP_MONITORY_QUERY for VFs. This produces unpleasing error messages in the log when temp1_input is queried via the hwmon sysfs interface from a VF. The error is harmless and expected, so silence it and return unknown as the value. Since the device temperature is not particularly sensitive information, provide flexibility to change this policy in future by silencing the error rather than avoiding the HWRM call entirely for VFs. Fixes: cde49a42a9bb ("bnxt_en: Add hwmon sysfs support to read temperature") Cc: Marc Smith <msmith626@gmail.com> Reported-by: Marc Smith <msmith626@gmail.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt_en: Fix possible crash in bnxt_fw_reset_task().Michael Chan
bnxt_fw_reset_task() is run from a delayed workqueue. The current code is not cancelling the workqueue in the driver's .remove() method and it can potentially crash if the device is removed with the workqueue still pending. The fix is to clear the BNXT_STATE_IN_FW_RESET flag and then cancel the delayed workqueue in bnxt_remove_one(). bnxt_queue_fw_reset_work() also needs to check that this flag is set before scheduling. This will guarantee that no rescheduling will be done after it is cancelled. Fixes: 230d1f0de754 ("bnxt_en: Handle firmware reset.") Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt_en: Fix PCI AER error recovery flowVasundhara Volam
When a PCI error is detected the PCI state could be corrupt, save the PCI state after initialization and restore it after the slot reset. Fixes: 6316ea6db93d ("bnxt_en: Enable AER support.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt_en: Fix ethtool -S statitics with XDP or TCs enabled.Michael Chan
We are returning the wrong count for ETH_SS_STATS in get_sset_count() when XDP or TCs are enabled. In a recent commit, we got rid of irrelevant counters when the ring is RX only or TX only, but we did not make the proper adjustments for the count. As a result, when we have XDP or TCs enabled, we are returning an excess count because some of the rings are TX only. This causes ethtool -S to display extra counters with no counter names. Fix bnxt_get_num_ring_stats() by not assuming that all rings will always have RX and TX counters in combined mode. Fixes: 125592fbf467 ("bnxt_en: show only relevant ethtool stats for a TX or RX ring") Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt_en: Check for zero dir entries in NVRAM.Vasundhara Volam
If firmware goes into unstable state, HWRM_NVM_GET_DIR_INFO firmware command may return zero dir entries. Return error in such case to avoid zero length dma buffer request. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt_en: Don't query FW when netif_running() is false.Pavan Chebbi
In rare conditions like two stage OS installation, the ethtool's get_channels function may be called when the device is in D3 state, leading to uncorrectable PCI error. Check netif_running() first before making any query to FW which involves writing to BAR. Fixes: db4723b3cd2d ("bnxt_en: Check max_tx_scheduler_inputs value from firmware.") Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26net: dp83869: Fix RGMII internal delay configurationDaniel Gorsulowski
The RGMII control register at 0x32 indicates the states for the bits RGMII_TX_CLK_DELAY and RGMII_RX_CLK_DELAY as follows: RGMII Transmit/Receive Clock Delay 0x0 = RGMII transmit clock is shifted with respect to transmit/receive data. 0x1 = RGMII transmit clock is aligned with respect to transmit/receive data. This commit fixes the inversed behavior of these bits Fixes: 736b25afe284 ("net: dp83869: Add RGMII internal delay configuration") Signed-off-by: Daniel Gorsulowski <daniel.gorsulowski@esd.eu> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25ibmvnic fix NULL tx_pools and rx_tools issue at do_resetMingming Cao
At the time of do_rest, ibmvnic tries to re-initalize the tx_pools and rx_pools to avoid re-allocating the long term buffer. However there is a window inside do_reset that the tx_pools and rx_pools were freed before re-initialized making it possible to deference null pointers. This patch fix this issue by always check the tx_pool and rx_pool are not NULL after ibmvnic_login. If so, re-allocating the pools. This will avoid getting into calling reset_tx/rx_pools with NULL adapter tx_pools/rx_pools pointer. Also add null pointer check in reset_tx_pools and reset_rx_pools to safe handle NULL pointer case. Signed-off-by: Mingming Cao <mmc@linux.vnet.ibm.com> Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25net: ethernet: ti: cpsw_new: fix clean up of vlan mc entries for host portMurali Karicheri
To flush the vid + mc entries from ALE, which is required when a VLAN interface is removed, driver needs to call cpsw_ale_flush_multicast() with ALE_PORT_HOST for port mask as these entries are added only for host port. Without this, these entries remain in the ALE table even after removing the VLAN interface. cpsw_ale_flush_multicast() calls cpsw_ale_flush_mcast which expects a port mask to do the job. Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25net: ethernet: ti: cpsw: fix clean up of vlan mc entries for host portMurali Karicheri
To flush the vid + mc entries from ALE, which is required when a VLAN interface is removed, driver needs to call cpsw_ale_flush_multicast() with ALE_PORT_HOST for port mask as these entries are added only for host port. Without this, these entries remain in the ALE table even after removing the VLAN interface. cpsw_ale_flush_multicast() calls cpsw_ale_flush_mcast which expects a port mask to do the job. Fixes: 15180eca569b ("net: ethernet: ti: cpsw: fix vlan mcast") Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25net: caif: fix error code handlingTong Zhang
cfpkt_peek_head return 0 and 1, caller is checking error using <0 Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25net: dsa: mt7530: Add of_node_put() before break and return statementsSumera Priyadarsini
Every iteration of for_each_child_of_node() decrements the reference count of the previous node, however when control is transferred from the middle of the loop, as in the case of a return or break or goto, there is no decrement thus ultimately resulting in a memory leak. Fix a potential memory leak in mt7530.c by inserting of_node_put() before the break and return statements. Issue found with Coccinelle. Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-19 11:25:49 +0000