summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2020-02-20mlxsw: spectrum_span: Use struct_size() to simplify allocationIdo Schimmel
Allocate the main mirroring struct and the individual structs for the different mirroring agents in a single allocation. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20mlxsw: spectrum_span: Do no expose mirroring agents to entire driverIdo Schimmel
The struct holding the different mirroring agents is currently allocated as part of the main driver struct. This is unlike other driver modules. Allocate the memory required to store the different mirroring agents as part of the initialization of the mirroring module. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20mlxsw: spectrum: Protect counter pool with a lockIdo Schimmel
The counter pool is a shared resource. It is used by both the ACL code to allocate counters for actions and by the routing code to allocate counters for adjacency entries (for example). Currently, all allocations are protected by RTNL, but this is going to change with the removal of RTNL from the routing code. Therefore, protect counter allocations with a spin lock. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20mlxsw: spectrum_kvdl: Protect allocations with a lockIdo Schimmel
The KVDL is used to store objects allocated throughout various places in the driver. For example, both nexthops (adjacency entries) and ACL actions are stored in the KVDL. Currently, all allocations are protected by RTNL, but this is going to change with the removal of RTNL from the routing code. Therefore, protect KVDL allocations with a lock. A mutex is used since the free operation can block in Spectrum-2. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20net: remove unused macro from fib_trie.cLi RongQing
TNODE_KMALLOC_MAX and VERSION are not used, so remove them Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20net: neigh: remove unused NEIGH_SYSCTL_MS_JIFFIES_ENTRYLi RongQing
this macro is never used, so remove it Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19tc-testing: updated tdc tests for basic filterRoman Mashak
Added tests for 'u32' extended match rules for u8 alignment. Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19Merge branch 'net-phy-Better-support-for-BCM54810'David S. Miller
Florian Fainelli says: ==================== net: phy: Better support for BCM54810 This patch series updates the broadcom PHY driver to better support the BCM54810 and allow it to make use of the exiting bcm54xx_adjust_rxrefclk() as well as fix suspend/resume for it. Changes in v2: - added Reviewed-by tags from Andrew for patches #1 and #3 - expanded commit message in #2 to explain the change ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net: phy: broadcom: Wire suspend/resume for BCM54810Florian Fainelli
The BCM54810 PHY can use the standard BMCR Power down suspend, but needs a custom resume routine which first clear the Power down bit, and then re-initializes the PHY. While in low-power mode, the PHY only accepts writes to the BMCR register. The datasheet clearly says it: Reads or writes to any MII register other than MII Control register (address 00h) while the device is in the standby power-down mode may cause unpredictable results. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net: phy: broadcom: Have bcm54xx_adjust_rxrefclk() check for flagsFlorian Fainelli
bcm54xx_adjust_rxrefclk() already checks for PHY_BRCM_AUTO_PWRDWN_ENABLE and PHY_BRCM_DIS_TXCRXC_NOENRGY in order to set the appropriate bit. The situation is a bit more complicated with the flag PHY_BRCM_RX_REFCLK_UNUSED but essentially amounts to the same situation. The default setting for the 125MHz clock is to be on for all PHYs and we still treat BCM50610 and BCM50610M specifically with the polarity of the bit reversed. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net: phy: broadcom: Allow BCM54810 to use bcm54xx_adjust_rxrefclk()Florian Fainelli
The function bcm54xx_adjust_rxrefclk() works correctly on the BCM54810 PHY, allow this device ID to proceed through. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19sfc: remove unused variable 'efx_default_channel_type'YueHaibing
drivers/net/ethernet/sfc/efx.c:116:38: warning: efx_default_channel_type defined but not used [-Wunused-const-variable=] commit 83975485077d ("sfc: move channel alloc/removal code") left behind this, remove it. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 83975485077d ("sfc: move channel alloc/removal code") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19Merge branch 'hns3-next'David S. Miller
Huazhong Tan says: ==================== net: hns3: misc updates for -net-next This series includes some misc updates for the HNS3 ethernet driver. [patch 1] modifies an unsuitable print when setting dulex mode. [patch 2] adds some debugfs info for TC and DWRR. [patch 3] adds some debugfs info for loopback. [patch 4] adds a missing help info for QS shaper in debugfs. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net: hns3: add missing help info for QS shaper in debugfsYonglong Liu
HNS3 driver can dump QS shaper configs via debugfs, but missing help info in debugfs for this operation. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net: hns3: add support for dump MAC ID and loopback status in debugfsYufeng Mo
The MAC ID and loopback status information are obtained from the hardware, which will be helpful for debugging. This patch adds support for these two items in debugfs. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net: hns3: add enabled TC numbers and DWRR weight info in debugfsYonglong Liu
The actual enabled TC numbers and the DWRR weight of each TC may be helpful for debugging, so adds them into debugfs. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net: hns3: modify an unsuitable print when setting unknown duplex to fibreGuangbin Huang
Currently, if device is in link down status and user uses 'ethtool -s' command to set speed but not specify duplex mode, the duplex mode passed from ethtool to driver is unknown value(255), and the fibre port will identify this value as half duplex mode and print "only copper port supports half duplex!". This message is confusing. So for fibre port, only the setting duplex is half, prints error and returns. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19mlxsw: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19phy: avoid unnecessary link-up delay in polling modePetr Oros
commit 93c0970493c71f ("net: phy: consider latched link-down status in polling mode") removed double-read of latched link-state register for polling mode from genphy_update_link(). This added extra ~1s delay into sequence link down->up. Following scenario: - After boot link goes up - phy_start() is called triggering an aneg restart, hence link goes down and link-down info is latched. - After aneg has finished link goes up. In phy_state_machine is checked link state but it is latched "link is down". The state machine is scheduled after one second and there is detected "link is up". This extra delay can be avoided when we keep link-state register double read in case when link was down previously. With this solution we don't miss a link-down event in polling mode and link-up is faster. Details about this quirky behavior on Realtek phy: Without patch: T0: aneg is started, link goes down, link-down status is latched T0+3s: state machine runs, up-to-date link-down is read T0+4s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), here i read link-down (BMSR_LSTATUS==0), T0+5s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), up-to-date link-up is read (BMSR_LSTATUS==1), phydev->link goes up, state change PHY_NOLINK to PHY_RUNNING With patch: T0: aneg is started, link goes down, link-down status is latched T0+3s: state machine runs, up-to-date link-down is read T0+4s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), first BMSR read: BMSR_ANEGCOMPLETE==1 and BMSR_LSTATUS==0, second BMSR read: BMSR_ANEGCOMPLETE==1 and BMSR_LSTATUS==1, phydev->link goes up, state change PHY_NOLINK to PHY_RUNNING Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19Merge branch 'tcp_v6_gso_csum_prep'David S. Miller
Heiner Kallweit says: ==================== net: core: add helper tcp_v6_gso_csum_prep Several network drivers for chips that support TSO6 share the same code for preparing the TCP header, so let's factor it out to a helper. A difference is that some drivers reset the payload_len whilst others don't do this. This value is overwritten by TSO anyway, therefore the new helper resets it in general. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19vmxnet3: use new helper tcp_v6_gso_csum_prepHeiner Kallweit
Use new helper tcp_v6_gso_csum_prep in additional network drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19r8152: use new helper tcp_v6_gso_csum_prepHeiner Kallweit
Use new helper tcp_v6_gso_csum_prep in additional network drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19hv_netvsc: use new helper tcp_v6_gso_csum_prepHeiner Kallweit
Use new helper tcp_v6_gso_csum_prep in additional network drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net: socionext: use new helper tcp_v6_gso_csum_prepHeiner Kallweit
Use new helper tcp_v6_gso_csum_prep in additional network drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net: qcom/emac: use new helper tcp_v6_gso_csum_prepHeiner Kallweit
Use new helper tcp_v6_gso_csum_prep in additional network drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19ionic: use new helper tcp_v6_gso_csum_prepHeiner Kallweit
Use new helper tcp_v6_gso_csum_prep in additional network drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19jme: use new helper tcp_v6_gso_csum_prepHeiner Kallweit
Use new helper tcp_v6_gso_csum_prep in additional network drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19e1000(e): use new helper tcp_v6_gso_csum_prepHeiner Kallweit
Use new helper tcp_v6_gso_csum_prep in additional network drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19enic: use new helper tcp_v6_gso_csum_prepHeiner Kallweit
Use new helper tcp_v6_gso_csum_prep in additional network drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19bna: use new helper tcp_v6_gso_csum_prepHeiner Kallweit
Use new helper tcp_v6_gso_csum_prep in additional network drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net: atheros: use new helper tcp_v6_gso_csum_prepHeiner Kallweit
Use new helper tcp_v6_gso_csum_prep in additional network drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19r8169: use new helper tcp_v6_gso_csum_prepHeiner Kallweit
Simplify the code by using the new helper tcp_v6_gso_csum_prep. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net: core: add helper tcp_v6_gso_csum_prepHeiner Kallweit
Several network drivers for chips that support TSO6 share the same code for preparing the TCP header, so let's factor it out to a helper. A difference is that some drivers reset the payload_len whilst others don't do this. This value is overwritten by TSO anyway, therefore the new helper resets it in general. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net/ipv4/sysctl: show tcp_{allowed, available}_congestion_control in ↵Christian Brauner
non-initial netns It is currenty possible to switch the TCP congestion control algorithm in non-initial network namespaces: unshare -U --map-root --net --fork --pid --mount-proc echo "reno" > /proc/sys/net/ipv4/tcp_congestion_control works just fine. But currently non-initial network namespaces have no way of kowing which congestion algorithms are available or allowed other than through trial and error by writing the names of the algorithms into the aforementioned file. Since we already allow changing the congestion algorithm in non-initial network namespaces by exposing the tcp_congestion_control file there is no reason to not also expose the tcp_{allowed,available}_congestion_control files to non-initial network namespaces. After this change a container with a separate network namespace will show: root@f1:~# ls -al /proc/sys/net/ipv4/tcp_* | grep congestion -rw-r--r-- 1 root root 0 Feb 19 11:54 /proc/sys/net/ipv4/tcp_allowed_congestion_control -r--r--r-- 1 root root 0 Feb 19 11:54 /proc/sys/net/ipv4/tcp_available_congestion_control -rw-r--r-- 1 root root 0 Feb 19 11:54 /proc/sys/net/ipv4/tcp_congestion_control Link: https://github.com/lxc/lxc/issues/3267 Reported-by: Haw Loeung <haw.loeung@canonical.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net: mvneta: align xdp stats naming scheme to mlx5 driverLorenzo Bianconi
Introduce "rx" prefix in the name scheme for xdp counters on rx path. Differentiate between XDP_TX and ndo_xdp_xmit counters Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19Merge branch 'octeontx2-af-Cleanup-changes'David S. Miller
Sunil Goutham says: ==================== octeontx2-af: Cleanup changes These patches cleanup AF driver by removing unnecessary function exports and cleanup repititive logic. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19octeontx2-af: Cleanup nixlf and blkaddr retrieval logicSunil Goutham
Cleanedup repititive nixlf and blkaddr retrieving logic is various mailbox handlers throughout the rvu_nix.c file. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19octeontx2-af: Cleanup CGX config permission checksSunil Goutham
Most of the CGX register config is restricted to mapped RVU PFs, this patch cleans up these permission checks spread across the rvu_cgx.c file by moving the checks to a common fn(). Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19octeontx2-af: Remove unnecessary export symbols in CGX driverSunil Goutham
Since CGX driver and AF driver are built into a single module the export symbols in CGX driver are not needed. This patch gets rid of them. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19Merge tag 'mlx5-updates-2020-01-24' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== This series adds two moderate updates and some misc small patches to mlx5 driver. 1) From Aya, Add the missing devlink health dump callbacks support for both rx and tx health reporters. First patch of the series is extending devlink API to set binary fmsg data. All others patches in the series are adding the mlx5 devlink health callbacks support and the needed FW commands. 2) Also from Aya, Support for FEC modes based on 50G per lane links. Part of this series, Aya adds one missing link mode define "FEC_LLRS" to include/uapi/linux/ethtool.h. 3) From Joe, Use proper logging and tracing line terminations 4) From Christophe, Remove a useless 'drain_workqueue()' ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-18net/mlx5: Remove a useless 'drain_workqueue()' call in 'mlx5e_ipsec_cleanup()'Christophe JAILLET
'destroy_workqueue()' already calls 'drain_workqueue()', there is no need to call it explicitly. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-18net/mlx5e: Add support for FEC modes based on 50G per lane linksAya Levin
Introduce new FEC modes: - RS-FEC-(544,514) - LL_RS-FEC-(272,257+1) Add support in ethtool for set and get callbacks for the new modes above. While RS-FEC-(544,514) is mapped to exsiting RS FEC mode, LL_RS-FEC-(272,257+1) is mapped to a new ethtool link mode: LL-RS. Add support for FEC on 50G per lane link modes up to 400G. The new link modes uses a u16 fields instead of u8 fields for the legacy link modes. Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-18ethtool: Add support for low latency RS FECAya Levin
Add support for low latency Reed Solomon FEC as LLRS. The LL-FEC is defined by the 25G/50G ethernet consortium, in the document titled "Low Latency Reed Solomon Forward Error Correction" Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> CC: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
2020-02-18net/mlxe5: Separate between FEC and current speedAya Levin
FEC mode is per link type, not necessary per speed. This patch access FEC register by link modes instead of speeds. This patch will allow further enhacment of link modes supporting FEC with the same speed (different lane type). Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-18net/mlx5e: Advertise globaly supported FEC modesAya Levin
Ethtool advertise supported link modes on an interface. Per each FEC mode, query if there is a link type which supports it. If so, add this FEC mode to the supported FEC modes list. Prior to this patch, ethtool advertised only the supported FEC modes on the current link type. Add an explicit mapping between internal FEC modes and ethtool link mode bits. With this change, adding new FEC modes in the downstream patch would be easier. Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-18net/mlx5e: Enforce setting of a single FEC modeAya Levin
Ethtool command allow setting of several FEC modes in a single set command. The driver can only set a single FEC mode at a time. With this patch driver will reply not-supported on setting several FEC modes. Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-18net/mlx5e: Set FEC to auto when configured mode is not supportedAya Levin
When configuring FEC mode, driver tries to set it for all available link types. If a link type doesn't support a FEC mode, set this link type to auto (FW best effort). Prior to this patch, when a link type didn't support a FEC mode is was set to no FEC. Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-18mlx5: Use proper logging and tracing line terminationsJoe Perches
netdev_err should use newline termination but mlx5_health_report is used in a trace output function devlink_health_report where no newline should be used. Remove the newlines from a couple formats and add a format string of "%s\n" to the netdev_err call to not directly output the logging string. Also use snprintf to avoid any possible output string overrun. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-18net/mlx5e: Support dump callback in RX reporterAya Levin
Add support for SQ's FW dump on RX reporter's events. Use Resource dump API to retrieve the relevant data: RX slice, RQ dump, RX buffer and ICOSQ dump (depends on the error). Wrap it in formatted messages and store the binary output in devlink core. Example: $ devlink health dump show pci/0000:00:0b.0 reporter rx RX Slice: data: 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de RQs: RQ: rqn: 1512 data: 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de RQ: rqn: 1517 data: 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de $ devlink health dump show pci/0000:00:0b.0 reporter rx -jp { "RX Slice": { "data":[ 0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,2,1,0,0,0,0,128,0,1,0,0,0,0,173,222] }, "RQs": [ { "RQ": { "index": 1512, "data": [ 0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,2,1,0,0,0,0,128,0,1,0,0,0,0,173,222] } },{ "RQ": { "index": 1517, "data": [ 0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,2,1,0,0,0,0,128,0,1,0,0,0,0,173] } } ] } Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-02-18net/mlx5e: Support dump callback in TX reporterAya Levin
Add support for SQ's FW dump on TX reporter's events. Use Resource dump API to retrieve the relevant data: SX slice, SQ dump and SQ buffer. Wrap it in formatted messages and store the binary output in devlink core. Example: $ devlink health dump show pci/0000:00:0b.0 reporter tx SX Slice: data: 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 02 01 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 20 40 90 81 88 ff ff 00 00 00 00 00 00 00 00 15 00 15 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 81 ae 41 06 00 ea ff ff SQs: SQ: index: 1511 data: 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 02 01 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 20 40 90 81 88 ff ff 00 00 00 00 00 00 00 00 15 00 15 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 81 ae 41 06 00 ea ff ff SQ: index: 1516 data: 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 02 01 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 20 40 90 81 88 ff ff 00 00 00 00 00 00 00 00 15 00 15 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 81 ae 41 06 00 ea ff ff $ devlink health dump show pci/0000:00:0b.0 reporter tx -jp { "SX Slice": { "data": [ 0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,2,1,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,32,64,144,129,136,255,255,0,0,0,0,0,0,0,0,21,0,21,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,129,174,65,6,0,234,255,255], }, "SQs": [ { "SQ": { "index": 1511, "data": [ 0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,2,1,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,32,64,144,129,136,255,255,0,0,0,0,0,0,0,0,21,0,21,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,129,174,65,6,0,234,255,255] } },{ "SQ": { "index": 1516, "data": [ 0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,2,1,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,32,64,144,129,136,255,255,0,0,0,0,0,0,0,0,21,0,21,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,129,174,65,6,0,234,255,255] } } ] } Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-12 13:22:58 +0000