summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2017-04-30e1000e: Initial Support for CannonLakeSasha Neftin
i219 (6) and i219 (7) are the next LOM generations that will be available on the nextIntel Client platform (CannonLake) This patch provides the initial support for these devices Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Reviewed-by: Raanan Avargil <raanan.avargil@intel.com> Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-30e1000e: fix PTP on e1000_pch_lpt variantsJarod Wilson
I've got reports that the Intel I-218V NIC in Intel NUC5i5RYH systems used as a PTP slave experiences random ~10 hour clock jumps, which are resolved if the same workaround for the 82574 and 82583 is employed, so set the appropriate flag2 in e1000_pch_lpt_info too. Reported-by: Rupesh Patel <rupatel@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-29Merge branch '10GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2017-04-29 This series contains updates to ixgbe and ixgbevf only, most notable is the addition of XDP support to our 10GbE drivers. Paul fixes ixgbe to acquire the PHY semaphore before accessing PHY registers when issuing a device reset. John adds XDP support (yeah!) for ixgbe. Emil fixes an issue by flushing the MACVLAN filters on VF reset to avoid conflicts with other VFs that may end up using the same MAC address. Also fixed a bug where ethtool -S displayed some empty fields for ixgbevf because it was using ixgbe_stats instead ixgbevf_stats for IXGBEVF_QUEUE_STATS_LEN. Tony adds the ability to specify a zero MAC address in order to clear the VF's MAC address from the RAR table. Also adds support for a new 1000Base-T device based on x550EM_X MAC type. Fixed an issue where the RSS key specified by the user would be over-written with a pre-existing value, so change the rss_key to a pointer so we can check to see if the key has a value set before attempting to set it. Fixed the logic for mailbox support for getting RETA and RSS values, which are only supported by 82599 and x540 devices. v2: fixed up patches #2 and #3 based on feedback from Jakub and to address build issues when page sizes are larger than 4k ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-29ixgbevf: Check for RSS key before setting valueTony Nguyen
The RSS key is being repopulated every time the interface is brought up regardless of whether there is an existing value. If the user sets the RSS key and the interface is brought up (e.g. reset), the user specified RSS key will be overwritten. This patch changes the rss_key to a pointer so we can check to see if the key has been populated and preserve it accordingly. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-29ixgbevf: Fix errors in retrieving RETA and RSS from PFTony Nguyen
Mailbox support for getting RETA and RSS is available for only 82599 and x540; a previous patch reversed the logic and these adapters were returning not supported. Also, the NACK check in ixgbevf_get_rss_key_locked() was checking for the command IXGBE_VF_GET_RETA instead of IXGBE_VF_GET_RSS_KEY. This patch corrects both issues by correcting the logic and checking for the right command. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-29ixgbe: Check for RSS key before setting valueTony Nguyen
The RSS key is being repopulated every time the interface is brought up regardless of whether there is an existing value. If the user sets the RSS key and the interface is brought up (e.g. reset), the user specified RSS key will be overwritten. This patch changes the rss_key to a pointer so we can check to see if the key has been populated and preserve it accordingly. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-29ixgbe: Add 1000Base-T device based on X550EM_X MACPaul Greenwalt
Add support for new 1000Base-T device based on X550EM_X MAC type. All PHY operations are disabled as the PHY is controlled by FW. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-29ixgbe: Allow setting zero MAC address for VFTony Nguyen
Currently, there is no logic that allows a VF's MAC address to be removed from the RAR table. Allow the user to specify a zero MAC address in order to clear the VF's MAC address from the RAR table. This functionality is also utilized by libvirt when removing VFs. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-29ixgbevf: fix size of queue stats lengthEmil Tantilov
IXGBEVF_QUEUE_STATS_LEN is based on ixgebvf_stats, not ixgbe_stats. This change fixes a bug where ethtool -S displayed some empty fields. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-29ixgbe: clean macvlan MAC filter table on VF resetEmil Tantilov
Flush the macvlan filters on VF reset to avoid conflict with other VFs that may end up using the same MAC address. The main change here is the call to ixgbe_set_vf_macvlan() with index 0. Moved ixgbe_set_vf_macvlan() in front of ixgbe_vf_reset_event() to avoid adding a prototype. Reported-by: Sritej Kanakadandi Sritej Rama <skanakad@cisco.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-29ixgbe: delay tail write to every 'n' packetsJohn Fastabend
Current XDP implementation hits the tail on every XDP_TX return code. This patch changes driver behavior to only hit the tail after packet processing is complete. With this patch I can run XDP drop programs @ 14+Mpps and XDP_TX programs are at ~13.5Mpps. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-29ixgbe: add support for XDP_TX actionJohn Fastabend
A couple design choices were made here. First I use a new ring pointer structure xdp_ring[] in the adapter struct instead of pushing the newly allocated XDP TX rings into the tx_ring[] structure. This means we have to duplicate loops around rings in places we want to initialize both TX rings and XDP rings. But by making it explicit it is obvious when we are using XDP rings and when we are using TX rings. Further we don't have to do ring arithmatic which is error prone. As a proof point for doing this my first patches used only a single ring structure and introduced bugs in FCoE code and macvlan code paths. Second I am aware this is not the most optimized version of this code possible. I want to get baseline support in using the most readable format possible and then once this series is included I will optimize the TX path in another series of patches. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-29ixgbe: add XDP support for pass and drop actionsJohn Fastabend
Basic XDP drop support for ixgbe. Uses READ_ONCE/xchg semantics on XDP programs instead of RCU primitives as suggested by Daniel Borkmann and Alex Duyck. v2: fix the build issues seen w/ XDP when page sizes are larger than 4K and made minor fixes based on feedback from Jakub Kicinski Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-28ixgbe: Acquire PHY semaphore before device resetPaul Greenwalt
A recent firmware change fixed an issue to acquire the PHY semaphore before accessing PHY registers. This led to a case where SW can issue a device reset clearing the MDIO registers. This patch makes SW acquire the PHY semaphore before issuing a device reset. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-28Merge branch 'bpf-misc-next'David S. Miller
Daniel Borkmann says: ==================== Misc BPF updates This set cleans up ldimm64 leftovers from early eBPF days and adds couple of test cases related to this to the verifier test suite. It also cleans up the kallsyms spinlock (had same patch also in queue) by relaxing it through switching to _bh variant. It fixes up test_progs in relation to htons/ntohs and adds accessor macros for the percpu tests in test_maps. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28bpf: provide a generic macro for percpu values for selftestsDaniel Borkmann
To overcome bugs as described and fixed in 89087c456fb5 ("bpf: Fix values type used in test_maps"), provide a generic BPF_DECLARE_PERCPU() and bpf_percpu() accessor macro for all percpu map values used in tests. Declaring variables works as follows (also works for structs): BPF_DECLARE_PERCPU(uint32_t, my_value); They can then be accessed normally as uint32_t type through: bpf_percpu(my_value, <cpu_nr>) For example: bpf_percpu(my_value, 0)++; Implicitly, we make sure that the passed type is allocated and aligned by gcc at least on a 8-byte boundary, so that it works together with the map lookup/update syscall for percpu maps. We use it as a usage example in test_maps, so that others are free to adapt this into their code when necessary. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28bpf: fix _htons occurences in test_progsDaniel Borkmann
Dave reported that on sparc test_progs generates buggy swapped eth->h_proto protocol comparisons: 10: (15) if r3 == 0xdd86 goto pc+9 R0=imm2,min_value=2,max_value=2 R1=pkt(id=0,off=0,r=14) R2=pkt_end R3=inv R4=pkt(id=0,off=14,r=14) R5=inv56 R10=fp This is due to the unconditional ... #define htons __builtin_bswap16 #define ntohs __builtin_bswap16 ... in test_progs that causes this. Make use of asm/byteorder.h and use __constant_htons() where possible and only perform the bswap16 when on little endian in non-constant case. Fixes: 6882804c916b ("selftests/bpf: add a test for overlapping packet range checks") Fixes: 37821613626e ("selftests/bpf: add l4 load balancer test based on sched_cls") Reported-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28bpf: bpf_lock on kallsysms doesn't need to be irqsaveHannes Frederic Sowa
Hannes rightfully spotted that the bpf_lock doesn't need to be irqsave variant. We never perform any such updates where this would be necessary (neither right now nor in future), therefore relax this further. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28bpf: add various test cases to verifier selftestsDaniel Borkmann
Add several test cases around ldimm64, fp arithmetic and direct packet access. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28bpf, x86_64/arm64: remove old ldimm64 artifacts from jitsDaniel Borkmann
For both cases, the verifier is already rejecting such invalid formed instructions. Thus, remove these artifacts from old times and align it with ppc64, sparc64 and s390x JITs that don't have them in the first place. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2017-04-28 Just one patch to fix a misplaced spin_unlock_bh in an error path. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28Merge tag 'mac80211-next-for-davem-2017-04-28' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Another set of patches for -next: * API support for concurrent scheduled scan requests * API changes for roaming reporting * BSS max idle support in mac80211 * API changes for TX status reporting in mac80211 * API changes for RX rate reporting in mac80211 * rewrite monitor logic to prepare for BPF filters * bugfix for rare devices without 2.4 GHz support * a bugfix for recent DFS changes * some further cleanups The API changes are actually at a nice time, since it's typically quiet just before the merge window, and trees can be synchronized easily during it. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28rhashtable: Do not lower max_elems when max_size is zeroHerbert Xu
The commit 6d684e54690c ("rhashtable: Cap total number of entries to 2^31") breaks rhashtable users that do not set max_size. This is because when max_size is zero max_elems is also incorrectly set to zero instead of 2^31. This patch fixes it by only lowering max_elems when max_size is not zero. Fixes: 6d684e54690c ("rhashtable: Cap total number of entries to 2^31") Reported-by: Florian Fainelli <f.fainelli@gmail.com> Reported-by: kernel test robot <fengguang.wu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28cfg80211: add request id to cfg80211_sched_scan_*() apiArend Van Spriel
Have proper request id filled in the SCHED_SCAN_RESULTS and SCHED_SCAN_STOPPED notifications toward user-space by having the driver provide it through the api. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: Add support for BSS max idle period elementAvraham Stern
Parse the BSS max idle period element and set the BSS configuration accordingly so the driver can use this information to configure the max idle period and to use protected management frames for keep alive when required. The BSS max idle period element is defined in IEEE802.11-2016, section 9.4.2.79 Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28cfg80211: unify cfg80211_roamed() and cfg80211_roamed_bss()Avraham Stern
cfg80211_roamed() and cfg80211_roamed_bss() take the same arguments except that cfg80211_roamed() requires the BSSID and cfg80211_roamed_bss() requires the bss entry. Unify the two functions by using a struct for driver initiated roaming information so that either the BSSID or the bss entry can be passed as an argument to the unified function. Signed-off-by: Avraham Stern <avraham.stern@intel.com> [modified the ath6k, brcm80211, rndis and wlan-ng drivers accordingly] Signed-off-by: Luca Coelho <luciano.coelho@intel.com> [modify brcmfmac to remove the useless cast, spotted by Arend] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: Fix possible sband related NULL pointer de-referenceMohammed Shafi Shajakhan
Existing API 'ieee80211_get_sdata_band' returns default 2 GHz band even if the channel context configuration is NULL. This crashes for chipsets which support 5 Ghz alone when it tries to access members of 'sband'. Channel context configuration can be NULL in multivif case and when channel switch is in progress (or) when it fails. Fix this by replacing the API 'ieee80211_get_sdata_band' with 'ieee80211_get_sband' which returns a NULL pointer for sband when the channel configuration is NULL. An example scenario is as below: In multivif mode (AP + STA) with drivers like ath10k, when we do a channel switch in the AP vif (which has a number of clients connected) and a STA vif which is connected to some other AP, when the channel switch in AP vif fails, while the STA vifs tries to connect to the other AP, there is a window where the channel context is NULL/invalid and this results in a crash while the clients connected to the AP vif tries to reconnect and this race is very similar to the one investigated by Michal in https://patchwork.kernel.org/patch/3788161/ and this does happens with hardware that supports 5Ghz alone after long hours of testing with continuous channel switch on the AP vif ieee80211 phy0: channel context reservation cannot be finalized because some interfaces aren't switching wlan0: failed to finalize CSA, disconnecting wlan0-1: deauthenticating from 8c:fd:f0:01:54:9c by local choice (Reason: 3=DEAUTH_LEAVING) WARNING: CPU: 1 PID: 19032 at net/mac80211/ieee80211_i.h:1013 sta_info_alloc+0x374/0x3fc [mac80211] [<bf77272c>] (sta_info_alloc [mac80211]) [<bf78776c>] (ieee80211_add_station [mac80211])) [<bf73cc50>] (nl80211_new_station [cfg80211]) Unable to handle kernel NULL pointer dereference at virtual address 00000014 pgd = d5f4c000 Internal error: Oops: 17 [#1] PREEMPT SMP ARM PC is at sta_info_alloc+0x380/0x3fc [mac80211] LR is at sta_info_alloc+0x37c/0x3fc [mac80211] [<bf772738>] (sta_info_alloc [mac80211]) [<bf78776c>] (ieee80211_add_station [mac80211]) [<bf73cc50>] (nl80211_new_station [cfg80211])) Cc: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: add ieee80211_tx_status_extFelix Fietkau
This allows the driver to pass in struct ieee80211_tx_status directly. Make ieee80211_tx_status_noskb a wrapper around it. As with ieee80211_tx_status_noskb, there is no _ni variant of this call, because it probably won't be needed. Even if the driver won't provide any extra status info other than what's in struct ieee80211_tx_info already, it can optimize status reporting this way by passing in the station pointer. Signed-off-by: Felix Fietkau <nbd@nbd.name> [use C99 initializers] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: move ieee80211_tx_status_noskb below ieee80211_tx_statusFelix Fietkau
Makes further cleanups more readable Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: make rate control tx status API more extensibleFelix Fietkau
Rename .tx_status_noskb to .tx_status_ext and pass a new on-stack struct ieee80211_tx_status instead of struct ieee80211_tx_info. This struct can be used to pass extra information, e.g. for dynamic tx power control Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: use bitfield macros for encoded rateJohannes Berg
Instead of hand-coding the bit manipulations, use the bitfield macros to generate the code for the encoded bitrate. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: rename ieee80211_rx_status::vht_nss to just nssJohannes Berg
This field will need to be used again for HE, so rename it now. Again, mostly done with this spatch: @@ expression status; @@ -status->vht_nss +status->nss @@ expression status; @@ -status.vht_nss +status.nss Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: separate encoding/bandwidth from flagsJohannes Berg
We currently use a lot of flags that are mutually incompatible, separate this out into actual encoding and bandwidth enum values. Much of this again done with spatch, with manual post-editing, mostly to add the switch statements and get rid of the conversions. @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_80MHZ +status->bw = RATE_INFO_BW_80 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_40MHZ +status->bw = RATE_INFO_BW_40 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_20MHZ +status->bw = RATE_INFO_BW_20 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_160MHZ +status->bw = RATE_INFO_BW_160 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_5MHZ +status->bw = RATE_INFO_BW_5 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_10MHZ +status->bw = RATE_INFO_BW_10 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_VHT +status->encoding = RX_ENC_VHT @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_HT +status->encoding = RX_ENC_HT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_VHT +status.encoding = RX_ENC_VHT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_HT +status.encoding = RX_ENC_HT @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_HT) +(status->encoding == RX_ENC_HT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_VHT) +(status->encoding == RX_ENC_VHT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_5MHZ) +(status->bw == RATE_INFO_BW_5) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_10MHZ) +(status->bw == RATE_INFO_BW_10) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_40MHZ) +(status->bw == RATE_INFO_BW_40) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_80MHZ) +(status->bw == RATE_INFO_BW_80) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_160MHZ) +(status->bw == RATE_INFO_BW_160) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: clean up rate encoding bits in RX statusJohannes Berg
In preparation for adding support for HE rates, clean up the driver report encoding for rate/bandwidth reporting on RX frames. Much of this patch was done with the following spatch: @@ expression status; @@ -status->flag & (RX_FLAG_HT | RX_FLAG_VHT) +status->enc_flags & (RX_ENC_FLAG_HT | RX_ENC_FLAG_VHT) @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORTPRE +status->enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status->flag & RX_FLAG_SHORTPRE +status->enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT +status->enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status->flag & RX_FLAG_HT +status->enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_40MHZ +status->enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status->flag & RX_FLAG_40MHZ +status->enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORT_GI +status->enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status->flag & RX_FLAG_SHORT_GI +status->enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT_GF +status->enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status->flag & RX_FLAG_HT_GF +status->enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_VHT +status->enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status->flag & RX_FLAG_VHT +status->enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_STBC_MASK +status->enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status->flag & RX_FLAG_STBC_MASK +status->enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_LDPC +status->enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status->flag & RX_FLAG_LDPC +status->enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_10MHZ +status->enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status->flag & RX_FLAG_10MHZ +status->enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_5MHZ +status->enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status->flag & RX_FLAG_5MHZ +status->enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_80MHZ +status->enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_80MHZ +status->enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_160MHZ +status->enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_160MHZ +status->enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_BF +status->enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_BF +status->enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status->flag op STBC << RX_FLAG_STBC_SHIFT +status->enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORTPRE +status.enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status.flag & RX_FLAG_SHORTPRE +status.enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT +status.enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status.flag & RX_FLAG_HT +status.enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_40MHZ +status.enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status.flag & RX_FLAG_40MHZ +status.enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORT_GI +status.enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status.flag & RX_FLAG_SHORT_GI +status.enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT_GF +status.enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status.flag & RX_FLAG_HT_GF +status.enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_VHT +status.enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status.flag & RX_FLAG_VHT +status.enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_STBC_MASK +status.enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status.flag & RX_FLAG_STBC_MASK +status.enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_LDPC +status.enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status.flag & RX_FLAG_LDPC +status.enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_10MHZ +status.enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status.flag & RX_FLAG_10MHZ +status.enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_5MHZ +status.enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status.flag & RX_FLAG_5MHZ +status.enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_80MHZ +status.enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_80MHZ +status.enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_160MHZ +status.enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_160MHZ +status.enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_BF +status.enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_BF +status.enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status.flag op STBC << RX_FLAG_STBC_SHIFT +status.enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ @@ -RX_FLAG_STBC_SHIFT +RX_ENC_FLAG_STBC_SHIFT Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-27Merge tag 'wireless-drivers-next-for-davem-2017-04-27' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.12 Few remaining patches for 4.12 submitted during the last week. Major changes: iwlwifi * the firmware for 7265D and 3168 NICs is frozen at version 29 * more support for the upcoming A000 series ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27Merge branch 'qed-ptp-enhancements'David S. Miller
Sudarsana Reddy Kalluru says: ==================== qed*: PTP enhancements. The patch series contains set of enhancements for qed/qede ptp implementation. Patches (1)-(3) adds resource locking implementation to allow PTP functionality only on the first detected ethernet PF of the port. The change is required as the adapter currently supports only one instance of the PTP client on a given port. Patch (4) removes the un-needed header file. Patch (5) moves the ptt-lock get/release logic to the ptp specific code. Please consider applying this series to "net-next" branch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27qed: Acquire/release ptt_ptp lock when enabling/disabling PTP.sudarsana.kalluru@cavium.com
Move the code for acquiring/releasing ptt_ptp lock to ptp specific implementations i.e., ptp_enable()/disable() respectively. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27qed: Remove the un-needed ptp header file.sudarsana.kalluru@cavium.com
The patch deletes the qed_ptp.h file which is not required. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27qede: Add support for PTP resource locking.sudarsana.kalluru@cavium.com
The patch adds necessary changes to the driver to use qed resource locking functionality. Currently the ptp initialization is spread between driver probe/open implementations, associated APIs are qede_ptp_register_phc()/qede_ptp_start(). Clubbed this functionality into single API qed_ptp_enable() to simplify the usage of qed resource locking implementation. The new API will be invoked in the probe path. Similarly the ptp clean-up code is moved to qede_ptp_disable() which gets invoked in the driver unload path. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27qed: Add support for PTP resource locking.sudarsana.kalluru@cavium.com
The patch adds support for per-port resource lock in favour of PTP. PTP module acquires/releases the MFW resource lock while enabling/ disabling the PTP on the interface. The PF instance which has the ownership of this resource lock will get the exclusive access to the PTP clock functionality on the port. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27qed: Add support for MFW resource locking.sudarsana.kalluru@cavium.com
The patch adds API for default initialization of the MFW resource locking. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27net: vrf: Do not allow looback to be moved to a VRFDavid Ahern
Moving the loopback into a VRF breaks networking for the default VRF. Since the VRF device is the loopback for VRF domains, there is no reason to move the loopback. Given the repercussions, block attempts to set lo into a VRF. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27fib_rules: fix error return codeWei Yongjun
Fix to return error code -EINVAL from the error handling case instead of 0, as done elsewhere in this function. Fixes: 622ec2c9d524 ("net: core: add UID to flows, rules, and routes") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27bridge: add per-port broadcast flood flagMike Manning
Support for l2 multicast flood control was added in commit b6cb5ac8331b ("net: bridge: add per-port multicast flood flag"). It allows broadcast as it was introduced specifically for unknown multicast flood control. But as broadcast is a special case of multicast, this may also need to be disabled. For this purpose, introduce a flag to disable the flooding of received l2 broadcasts. This approach is backwards compatible and provides flexibility in filtering for the desired packet types. Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Mike Manning <mmanning@brocade.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27net: fib: Decrease one unnecessary rt cache flush in fib_disable_ipGao Feng
The func fib_flush already flushes the rt cache if necessary, so it is not necessary to invoke rt_cache_flush again in fib_disable_ip. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27l2tp: remove useless device duplication test in l2tp_eth_create()Guillaume Nault
There's no need to verify that cfg->ifname is unique at this point. register_netdev() will return -EEXIST if asked to create a device with a name that's alrealy in use. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27net: remove unnecessary carrier status checkZhang Shengju
Since netif_carrier_on() will do nothing if device's carrier is already on, so it's unnecessary to do carrier status check. It's the same for netif_carrier_off(). Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27net: update comment for netif_dormant() functionZhang Shengju
This patch updates the comment for netif_dormant() function to reflect the intended usage. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27samples/bpf: Add support for SKB_MODE to xdp1 and xdp_tx_iptunnelDavid Ahern
Add option to xdp1 and xdp_tx_iptunnel to insert xdp program in SKB_MODE: - update set_link_xdp_fd to take a flags argument that is added to the RTM_SETLINK message - Add -S option to xdp1 and xdp_tx_iptunnel user code. When passed in XDP_FLAGS_SKB_MODE is set in the flags arg passed to set_link_xdp_fd Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27rhashtable: Cap total number of entries to 2^31Herbert Xu
When max_size is not set or if it set to a sufficiently large value, the nelems counter can overflow. This would cause havoc with the automatic shrinking as it would then attempt to fit a huge number of entries into a tiny hash table. This patch fixes this by adding max_elems to struct rhashtable to cap the number of elements. This is set to 2^31 as nelems is not a precise count. This is sufficiently smaller than UINT_MAX that it should be safe. When max_size is set max_elems will be lowered to at most twice max_size as is the status quo. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-05 04:36:27 +0000