| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 and cross-arch updates from Catalin Marinas:
"Here's a slightly wider-spread set of updates for 5.9.
Going outside the usual arch/arm64/ area is the removal of
read_barrier_depends() series from Will and the MSI/IOMMU ID
translation series from Lorenzo.
The notable arm64 updates include ARMv8.4 TLBI range operations and
translation level hint, time namespace support, and perf.
Summary:
- Removal of the tremendously unpopular read_barrier_depends()
barrier, which is a NOP on all architectures apart from Alpha, in
favour of allowing architectures to override READ_ONCE() and do
whatever dance they need to do to ensure address dependencies
provide LOAD -> LOAD/STORE ordering.
This work also offers a potential solution if compilers are shown
to convert LOAD -> LOAD address dependencies into control
dependencies (e.g. under LTO), as weakly ordered architectures will
effectively be able to upgrade READ_ONCE() to smp_load_acquire().
The latter case is not used yet, but will be discussed further at
LPC.
- Make the MSI/IOMMU input/output ID translation PCI agnostic,
augment the MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID
bus-specific parameter and apply the resulting changes to the
device ID space provided by the Freescale FSL bus.
- arm64 support for TLBI range operations and translation table level
hints (part of the ARMv8.4 architecture version).
- Time namespace support for arm64.
- Export the virtual and physical address sizes in vmcoreinfo for
makedumpfile and crash utilities.
- CPU feature handling cleanups and checks for programmer errors
(overlapping bit-fields).
- ACPI updates for arm64: disallow AML accesses to EFI code regions
and kernel memory.
- perf updates for arm64.
- Miscellaneous fixes and cleanups, most notably PLT counting
optimisation for module loading, recordmcount fix to ignore
relocations other than R_AARCH64_CALL26, CMA areas reserved for
gigantic pages on 16K and 64K configurations.
- Trivial typos, duplicate words"
Link: http://lkml.kernel.org/r/20200710165203.31284-1-will@kernel.org
Link: http://lkml.kernel.org/r/20200619082013.13661-1-lorenzo.pieralisi@arm.com
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (82 commits)
arm64: use IRQ_STACK_SIZE instead of THREAD_SIZE for irq stack
arm64/mm: save memory access in check_and_switch_context() fast switch path
arm64: sigcontext.h: delete duplicated word
arm64: ptrace.h: delete duplicated word
arm64: pgtable-hwdef.h: delete duplicated words
bus: fsl-mc: Add ACPI support for fsl-mc
bus/fsl-mc: Refactor the MSI domain creation in the DPRC driver
of/irq: Make of_msi_map_rid() PCI bus agnostic
of/irq: make of_msi_map_get_device_domain() bus agnostic
dt-bindings: arm: fsl: Add msi-map device-tree binding for fsl-mc bus
of/device: Add input id to of_dma_configure()
of/iommu: Make of_map_rid() PCI agnostic
ACPI/IORT: Add an input ID to acpi_dma_configure()
ACPI/IORT: Remove useless PCI bus walk
ACPI/IORT: Make iort_msi_map_rid() PCI agnostic
ACPI/IORT: Make iort_get_device_domain IRQ domain agnostic
ACPI/IORT: Make iort_match_node_callback walk the ACPI namespace for NC
arm64: enable time namespace support
arm64/vdso: Restrict splitting VVAR VMA
arm64/vdso: Handle faults on timens page
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- several Kbuild improvements
- several Mac fixes
- minor cleanups and fixes
- defconfig updates
* tag 'm68k-for-v5.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: defconfig: Update defconfigs for v5.8-rc3
m68k: Use CLEAN_FILES to clean up files
m68k: mac: Improve IOP debug messages
m68k: mac: Don't send uninitialized data in IOP message reply
m68k: mac: Fix IOP status/control register writes
m68k: mac: Don't send IOP message until channel is idle
m68k: atari: Annotate dummy read in ROM port IO code as __maybe_unused
m68k: Use sizeof_field() helper
m68k: Pass -D options to KBUILD_CPPFLAGS instead of KBUILD_{A,C}FLAGS
m68k: Optimize cc-option calls for cpuflags-y
m68k: sun3: Descend to prom from arch/m68k/sun3
m68k: Add arch/m68k/Kbuild
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/linux
Pull unicore32 removal from Mike Rapoport:
"Remove unicore32 support.
The unicore32 port do not seem maintained for a long time now, there
is no upstream toolchain that can create unicore32 binaries and all
the links to prebuilt toolchains for unicore32 are dead. Even
compilers that were available are not supported by the kernel anymore.
Guenter Roeck says:
"I have stopped building unicore32 images since v4.19 since there is
no available compiler that is still supported by the kernel. I am
surprised that support for it has not been removed from the kernel"
However, it's worth pointing out two things:
- Guan Xuetao is still listed as maintainer and asked for the port to
be kept around the last time Arnd suggested removing it two years
ago. He promised that there would be compiler sources (presumably
llvm), but has not made those available since.
- https://github.com/gxt has patches to linux-4.9 and qemu-2.7, both
released in 2016, with patches dated early 2019. These patches
mainly restore a syscall ABI that was never part of mainline Linux
but apparently used in production. qemu-2.8 removed support for
that ABI and newer kernels (4.19+) can no longer be built with the
old toolchain, so apparently there will not be any future updates
to that git tree"
* tag 'rm-unicore32' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/linux:
MAINTAINERS: remove "PKUNITY SOC DRIVERS" entry
rtc: remove fb-puv3 driver
video: fbdev: remove fb-puv3 driver
pwm: remove pwm-puv3 driver
input: i8042: remove support for 8042-unicore32io
i2c/buses: remove i2c-puv3 driver
cpufreq: remove unicore32 driver
arch: remove unicore32 port
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add support for function error injection.
- Add support for custom exception handlers, as required by
BPF_PROBE_MEM.
- Add support for BPF_PROBE_MEM.
- Add trace events for idle enter / exit for the s390 specific idle
implementation.
- Remove unused zcore memmmap device.
- Remove unused "raw view" from s390 debug feature.
- AP bus + zcrypt device driver code refactoring.
- Provide cex4 cca sysfs attributes for cex3 for zcrypt device driver.
- Expose only minimal interface to walk physmem for mm/memblock. This
is a common code change and it has been agreed on with Mike Rapoport
and Andrew Morton that this can go upstream via the s390 tree.
- Rework of the s390 vmem/vmmemap code to allow for future memory hot
remove.
- Get rid of FORCE_MAX_ZONEORDER to finally allow for order-10
allocations again, instead of only order-8 allocations.
- Various small improvements and fixes.
* tag 's390-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
s390/vmemmap: coding style updates
s390/vmemmap: avoid memset(PAGE_UNUSED) when adding consecutive sections
s390/vmemmap: remember unused sub-pmd ranges
s390/vmemmap: fallback to PTEs if mapping large PMD fails
s390/vmem: cleanup empty page tables
s390/vmemmap: take the vmem_mutex when populating/freeing
s390/vmemmap: cleanup when vmemmap_populate() fails
s390/vmemmap: extend modify_pagetable() to handle vmemmap
s390/vmem: consolidate vmem_add_range() and vmem_remove_range()
s390/vmem: rename vmem_add_mem() to vmem_add_range()
s390: enable HAVE_FUNCTION_ERROR_INJECTION
s390/pci: clarify comment in s390_mmio_read/write
s390/time: improve comparison for tod steering
s390/time: select CLOCKSOURCE_VALIDATE_LAST_CYCLE
s390/time: use CLOCKSOURCE_MASK
s390/bpf: implement BPF_PROBE_MEM
s390/kernel: expand exception table logic to allow new handling options
s390/kernel: unify EX_TABLE* implementations
s390/mm: allow order 10 allocations
s390/mm: avoid trimming to MAX_ORDER
...
|
|
Pull io_uring updates from Jens Axboe:
"Lots of cleanups in here, hardening the code and/or making it easier
to read and fixing bugs, but a core feature/change too adding support
for real async buffered reads. With the latter in place, we just need
buffered write async support and we're done relying on kthreads for
the fast path. In detail:
- Cleanup how memory accounting is done on ring setup/free (Bijan)
- sq array offset calculation fixup (Dmitry)
- Consistently handle blocking off O_DIRECT submission path (me)
- Support proper async buffered reads, instead of relying on kthread
offload for that. This uses the page waitqueue to drive retries
from task_work, like we handle poll based retry. (me)
- IO completion optimizations (me)
- Fix race with accounting and ring fd install (me)
- Support EPOLLEXCLUSIVE (Jiufei)
- Get rid of the io_kiocb unionizing, made possible by shrinking
other bits (Pavel)
- Completion side cleanups (Pavel)
- Cleanup REQ_F_ flags handling, and kill off many of them (Pavel)
- Request environment grabbing cleanups (Pavel)
- File and socket read/write cleanups (Pavel)
- Improve kiocb_set_rw_flags() (Pavel)
- Tons of fixes and cleanups (Pavel)
- IORING_SQ_NEED_WAKEUP clear fix (Xiaoguang)"
* tag 'for-5.9/io_uring-20200802' of git://git.kernel.dk/linux-block: (127 commits)
io_uring: flip if handling after io_setup_async_rw
fs: optimise kiocb_set_rw_flags()
io_uring: don't touch 'ctx' after installing file descriptor
io_uring: get rid of atomic FAA for cq_timeouts
io_uring: consolidate *_check_overflow accounting
io_uring: fix stalled deferred requests
io_uring: fix racy overflow count reporting
io_uring: deduplicate __io_complete_rw()
io_uring: de-unionise io_kiocb
io-wq: update hash bits
io_uring: fix missing io_queue_linked_timeout()
io_uring: mark ->work uninitialised after cleanup
io_uring: deduplicate io_grab_files() calls
io_uring: don't do opcode prep twice
io_uring: clear IORING_SQ_NEED_WAKEUP after executing task works
io_uring: batch put_task_struct()
tasks: add put_task_struct_many()
io_uring: return locked and pinned page accounting
io_uring: don't miscount pinned memory
io_uring: don't open-code recv kbuf managment
...
|
|
Pull core block updates from Jens Axboe:
"Good amount of cleanups and tech debt removals in here, and as a
result, the diffstat shows a nice net reduction in code.
- Softirq completion cleanups (Christoph)
- Stop using ->queuedata (Christoph)
- Cleanup bd claiming (Christoph)
- Use check_events, moving away from the legacy media change
(Christoph)
- Use inode i_blkbits consistently (Christoph)
- Remove old unused writeback congestion bits (Christoph)
- Cleanup/unify submission path (Christoph)
- Use bio_uninit consistently, instead of bio_disassociate_blkg
(Christoph)
- sbitmap cleared bits handling (John)
- Request merging blktrace event addition (Jan)
- sysfs add/remove race fixes (Luis)
- blk-mq tag fixes/optimizations (Ming)
- Duplicate words in comments (Randy)
- Flush deferral cleanup (Yufen)
- IO context locking/retry fixes (John)
- struct_size() usage (Gustavo)
- blk-iocost fixes (Chengming)
- blk-cgroup IO stats fixes (Boris)
- Various little fixes"
* tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block: (135 commits)
block: blk-timeout: delete duplicated word
block: blk-mq-sched: delete duplicated word
block: blk-mq: delete duplicated word
block: genhd: delete duplicated words
block: elevator: delete duplicated word and fix typos
block: bio: delete duplicated words
block: bfq-iosched: fix duplicated word
iocost_monitor: start from the oldest usage index
iocost: Fix check condition of iocg abs_vdebt
block: Remove callback typedefs for blk_mq_ops
block: Use non _rcu version of list functions for tag_set_list
blk-cgroup: show global disk stats in root cgroup io.stat
blk-cgroup: make iostat functions visible to stat printing
block: improve discard bio alignment in __blkdev_issue_discard()
block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers
block: defer flush request no matter whether we have elevator
block: make blk_timeout_init() static
block: remove retry loop in ioc_release_fn()
block: remove unnecessary ioc nested locking
block: integrate bd_start_claiming into __blkdev_get
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fix from Richard Weinberger.
* 'mtd/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: properly check all write ioctls for permissions
|
|
Instead of waiting in a loop for the userfaultfd condition to become
true, just wait once and return VM_FAULT_RETRY.
We've already dropped the mmap lock, we know we can't really
successfully handle the fault at this point and the caller will have to
retry anyway. So there's no point in making the wait any more
complicated than it needs to be - just schedule away.
And once you don't have that complexity with explicit looping, you can
also just lose all the 'userfaultfd_signal_pending()' complexity,
because once we've set the correct process sleeping state, and don't
loop, the act of scheduling itself will be checking if there are any
pending signals before going to sleep.
We can also drop the VM_FAULT_MAJOR games, since we'll be treating all
retried faults as major soon anyway (series to regularize and share more
of fault handling across architectures in a separate series by Peter Xu,
and in the meantime we won't worry about the possible minor - I'll be
here all week, try the veal - accounting difference).
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull file locking fix from Jeff Layton:
"Just a single, one-line patch to fix an inefficiency in the posix
locking code that can lead to it doing more wakeups than necessary"
* tag 'filelock-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
locks: add locks_move_blocks in posix_lock_inode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add support for allocating transforms on a specific NUMA Node
- Introduce the flag CRYPTO_ALG_ALLOCATES_MEMORY for storage users
Algorithms:
- Drop PMULL based ghash on arm64
- Fixes for building with clang on x86
- Add sha256 helper that does the digest in one go
- Add SP800-56A rev 3 validation checks to dh
Drivers:
- Permit users to specify NUMA node in hisilicon/zip
- Add support for i.MX6 in imx-rngc
- Add sa2ul crypto driver
- Add BA431 hwrng driver
- Add Ingenic JZ4780 and X1000 hwrng driver
- Spread IRQ affinity in inside-secure and marvell/cesa"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (157 commits)
crypto: sa2ul - Fix inconsistent IS_ERR and PTR_ERR
hwrng: core - remove redundant initialization of variable ret
crypto: x86/curve25519 - Remove unused carry variables
crypto: ingenic - Add hardware RNG for Ingenic JZ4780 and X1000
dt-bindings: RNG: Add Ingenic RNG bindings.
crypto: caam/qi2 - add module alias
crypto: caam - add more RNG hw error codes
crypto: caam/jr - remove incorrect reference to caam_jr_register()
crypto: caam - silence .setkey in case of bad key length
crypto: caam/qi2 - create ahash shared descriptors only once
crypto: caam/qi2 - fix error reporting for caam_hash_alloc
crypto: caam - remove deadcode on 32-bit platforms
crypto: ccp - use generic power management
crypto: xts - Replace memcpy() invocation with simple assignment
crypto: marvell/cesa - irq balance
crypto: inside-secure - irq balance
crypto: ecc - SP800-56A rev 3 local public key validation
crypto: dh - SP800-56A rev 3 local public key validation
crypto: dh - check validity of Z before export
lib/mpi: Add mpi_sub_ui()
...
|
|
git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fsverity update from Eric Biggers:
"One fix for fs/verity/ to strengthen a memory barrier which might be
too weak. This mirrors a similar fix in fs/crypto/"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fs-verity: use smp_load_acquire() for ->i_verity_info
|
|
Pull fscrypt updates from Eric Biggers:
"This release, we add support for inline encryption via the blk-crypto
framework which was added in 5.8.
Now when an ext4 or f2fs filesystem is mounted with '-o inlinecrypt',
the contents of encrypted files will be encrypted/decrypted via
blk-crypto, instead of directly using the crypto API. This model
allows taking advantage of the inline encryption hardware that is
integrated into the UFS or eMMC host controllers on most mobile SoCs.
Note that this is just an alternate implementation; the ciphertext
written to disk stays the same.
(This pull request does *not* include support for direct I/O on
encrypted files, which blk-crypto makes possible, since that part is
still being discussed.)
Besides the above feature update, there are also a few fixes and
cleanups, e.g. strengthening some memory barriers that may be too
weak.
All these patches have been in linux-next with no reported issues.
I've also tested them with the fscrypt xfstests, as usual. It's also
been tested that the inline encryption support works with the support
for Qualcomm and Mediatek inline encryption hardware that will be in
the scsi pull request for 5.9. Also, several SoC vendors are already
using a previous, functionally equivalent version of these patches"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: don't load ->i_crypt_info before it's known to be valid
fscrypt: document inline encryption support
fscrypt: use smp_load_acquire() for ->i_crypt_info
fscrypt: use smp_load_acquire() for ->s_master_keys
fscrypt: use smp_load_acquire() for fscrypt_prepared_key
fscrypt: switch fscrypt_do_sha256() to use the SHA-256 library
fscrypt: restrict IV_INO_LBLK_* to AES-256-XTS
fscrypt: rename FS_KEY_DERIVATION_NONCE_SIZE
fscrypt: add comments that describe the HKDF info strings
ext4: add inline encryption support
f2fs: add inline encryption support
fscrypt: add inline encryption support
fs: introduce SB_INLINECRYPT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"We don't have any big feature updates this time, there are lots of
small enhacements or fixes. A highlight perhaps is the parallel fsync
performance improvements, numbers below.
Regarding the dio/iomap that was reverted last time, the required API
changes are likely to land in the upcoming cycle, the btrfs part will
be updated afterwards.
User visible changes:
- new mount option rescue= to group all recovery-related mount
options so we don't have many specific options, currently
introducing only aliases for existing options, future extensions
are in development to allow read-only mount with partially damaged
structures:
- usebackuproot is an alias for rescue=usebackuproot
- nologreplay is an alias for rescue=nologreplay
- start deprecation of mount option inode_cache, removal scheduled to
v5.11
- removed deprecated mount options alloc_start and subvolrootid
- device stats corruption counter gets incremented when a checksum
mismatch is found
- qgroup information exported in /sys/fs/btrfs/<UUID>/qgroups/<id>
using sysfs
- add link /sys/fs/btrfs/<UUID>/bdi pointing to the associated
backing dev info
- FS_INFO ioctl enhancements:
- add flags to request/describe newly added items
- new item: numeric checksum type and checksum size
- new item: generation
- new item: metadata_uuid
- seed device: with one new read-write device added, print the new
device information in /proc/mounts
- balance: detect cancellation by Ctrl-C in existing cancellation
points
Performance improvements:
- optimized versions of various helpers on little-endian
architectures, where we don't have to do LE/BE conversion from
on-disk format
- tree-log/fsync optimizations leading to lower max latency reported
by dbench, reduced by about 12%
- all chunk tree leaves are prefetched at mount time, can improve
mount time on large (terabyte-sized) filesystems
- speed up parallel fsync of files with reflinked/deduped extents,
with jobs 16 to 1024 the throughput gets improved roughly by 50% on
average and runtime decreased roughly by 30% on average, notable
outlier is 128 jobs with +121.2% on throughput and -54.6% runtime
- another speed up of parallel fsync, reduce number of checksum tree
lookups and contention, the improvements start to show up with 2
tasks with +20% throughput and -16% runtime up to 64 with +200%
throughput and -66% runtime
Core:
- umount-time qgroup leak checker
- qgroups
- add a way to unreserve partial range after failure, avoiding
some EDQUOT errors
- improved flushing logic when EDQUOT is hit
- possible EINTR interruption caused by failed reservations after
transaction start is better handled and documented
- transaction abort errors are unified to EROFS in case it's not the
original reason of abort or we don't have other way to determine
the reason
Fixes:
- make truncate succeed on a NOCOW file even if data space is
exhausted
- fix cancelling balance on filesystem with exhausted metadata space
- anon block device:
- preallocate anon bdev when subvolume is created to report
failure early
- shorten time the anon bdev id is allocated
- don't allocate anon bdev for internal roots
- minor memory leak in ref-verify
- refuse invalid combinations of compression and NOCOW file flags
- lockdep fixes, updating the device locks
- remove obsolete fallback logic for block group profile adjustments
when switching from 1 to more devices, causing allocation of
unwanted block groups
Other cleanups, refactoring, simplifications:
- conversions from struct inode to struct btrfs_inode in internal
functions
- removal of unused struct members"
* tag 'for-5.9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (151 commits)
btrfs: do not set the full sync flag on the inode during page release
btrfs: release old extent maps during page release
btrfs: fix race between page release and a fast fsync
btrfs: open-code remount flag setting in btrfs_remount
btrfs: if we're restriping, use the target restripe profile
btrfs: don't adjust bg flags and use default allocation profiles
btrfs: fix lockdep splat from btrfs_dump_space_info
btrfs: move the chunk_mutex in btrfs_read_chunk_tree
btrfs: open device without device_list_mutex
btrfs: sysfs: use NOFS for device creation
btrfs: return EROFS for BTRFS_FS_STATE_ERROR cases
btrfs: document special case error codes for fs errors
btrfs: don't WARN if we abort a transaction with EROFS
btrfs: reduce contention on log trees when logging checksums
btrfs: remove done label in writepage_delalloc
btrfs: add comments for btrfs_reserve_flush_enum
btrfs: relocation: review the call sites which can be interrupted by signal
btrfs: avoid possible signal interruption of btrfs_drop_snapshot() on relocation tree
btrfs: relocation: allow signal to cancel balance
btrfs: raid56: remove out label in __raid56_parity_recover
...
|
|
Pull tpm updates from Jarkko Sakkinen:
"An issue was fixed with the TPM space buffer size. The buffer is used
to store in-TPM objects while swapped out of the TPM for a /dev/tpmrm0
session. The code incorrectly used PAGE_SIZE, which obviously can
vary. With these changes the buffer has a fixed size of 16 kB.
In addition, this contains support for acquiring TPM even log from
TPM2 ACPI table. This method is used by QEMU in particular"
* tag 'tpmdd-next-v5.9' of git://git.infradead.org/users/jjs/linux-tpmdd:
tpm: Add support for event log pointer found in TPM2 ACPI table
acpi: Extend TPM2 ACPI table with missing log fields
tpm: Unify the mismatching TPM space buffer sizes
tpm: Require that all digests are present in TCG_PCR_EVENT2 structures
|
|
* acpi-mm:
ACPI: OSL: Clean up the removal of unused memory mappings
ACPI: OSL: Use deferred unmapping in acpi_os_unmap_iomem()
ACPI: OSL: Use deferred unmapping in acpi_os_unmap_generic_address()
ACPICA: Preserve memory opregion mappings
ACPI: OSL: Implement deferred unmapping of ACPI memory
* acpi-tables:
ACPI: NUMA: Remove the useless 'node >= MAX_NUMNODES' check
ACPI: NUMA: Remove the useless sub table pointer check
ACPI: tables: Remove the duplicated checks for acpi_parse_entries_array()
ACPI: tables: avoid relocations for table signature array
* acpi-apei:
ACPI: APEI: remove redundant assignment to variable rc
* acpi-misc:
ACPI: Replace HTTP links with HTTPS ones
ACPI: Use valid link to the ACPI specification
ACPI: Use fallthrough pseudo-keyword
|
|
and 'acpi-prop'
* acpi-proc:
ACPI: procfs: Remove last dirs after being marked deprecated for a decade
* acpi-sysfs:
ACPI: sysfs: add newlines when printing module parameters
* acpi-pad:
ACPI: PAD: Eliminate usage of uninitialized_var() macro
* acpi-ec:
ACPI: EC: add newline when printing 'ec_event_clearing' module parameter
* acpi-pci:
PCI: hotplug: ACPI: Fix context refcounting in acpiphp_grab_context()
* acpi-prop:
ACPI: property: use cached name in acpi_fwnode_get_named_child_node()
|
|
* pm-sleep:
PM: sleep: spread "const char *" correctness
PM: hibernate: fix white space in a few places
freezer: Add unsafe version of freezable_schedule_timeout_interruptible() for NFS
PM: sleep: core: Emit changed uevent on wakeup_sysfs_add/remove
* pm-domains:
PM: domains: Restore comment indentation for generic_pm_domain.child_links
PM: domains: Fix up terminology with parent/child
* powercap:
powercap: Add Power Limit4 support
powercap: idle_inject: Replace play_idle() with play_idle_precise() in comments
powercap: intel_rapl: add support for Sapphire Rapids
* pm-tools:
pm-graph v5.7 - important s2idle fixes
cpupower: Replace HTTP links with HTTPS ones
cpupower: Fix NULL but dereferenced coccicheck errors
cpupower: Fix comparing pointer to 0 coccicheck warns
|
|
* pm-cpufreq: (24 commits)
cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode
cpufreq: intel_pstate: Rearrange the storing of new EPP values
cpufreq: intel_pstate: Avoid enabling HWP if EPP is not supported
cpufreq: intel_pstate: Clean up aperf_mperf_shift description
cpufreq: powernv: Make some symbols static
cpufreq: amd_freq_sensitivity: Mark sometimes used ID structs as __maybe_unused
cpufreq: intel_pstate: Supply struct attribute description for get_aperf_mperf_shift()
cpufreq: pcc-cpufreq: Mark sometimes used ID structs as __maybe_unused
cpufreq: powernow-k8: Mark 'hi' and 'lo' dummy variables as __always_unused
cpufreq: acpi-cpufreq: Mark sometimes used ID structs as __maybe_unused
cpufreq: acpi-cpufreq: Mark 'dummy' variable as __always_unused
cpufreq: powernv-cpufreq: Fix a bunch of kerneldoc related issues
cpufreq: pasemi: Include header file for {check,restore}_astate prototypes
cpufreq: cpufreq_governor: Demote store_sampling_rate() header to standard comment block
cpufreq: cpufreq: Demote lots of function headers unworthy of kerneldoc status
cpufreq: freq_table: Demote obvious misuse of kerneldoc to standard comment blocks
cpufreq: Replace HTTP links with HTTPS ones
cpufreq: intel_pstate: Fix static checker warning for epp variable
cpufreq: Remove the weakly defined cpufreq_default_governor()
cpufreq: Specify default governor on command line
...
|
|
* pm-cpuidle:
cpuidle: ACPI: fix 'return' with no value build warning
intel_idle: Customize IceLake server support
cpuidle: change enter_s2idle() prototype
cpuidle: psci: Prevent domain idlestates until consumers are ready
cpuidle: psci: Convert PM domain to platform driver
cpuidle: psci: Fix error path via converting to a platform driver
cpuidle: psci: Fail cpuidle registration if set OSI mode failed
cpuidle: psci: Split into two separate build objects
intel_idle: Eliminate redundant static variable
|
|
* pm-em:
OPP: refactor dev_pm_opp_of_register_em() and update related drivers
Documentation: power: update Energy Model description
PM / EM: change name of em_pd_energy to em_cpu_energy
PM / EM: remove em_register_perf_domain
PM / EM: add support for other devices than CPUs in Energy Model
PM / EM: update callback structure and add device pointer
PM / EM: introduce em_dev_register_perf_domain function
PM / EM: change naming convention from 'capacity' to 'performance'
* pm-core:
mmc: jz4740: Use pm_ptr() macro
PM: Make *_DEV_PM_OPS macros use __maybe_unused
PM: core: introduce pm_ptr() macro
|
|
* pm-devfreq:
PM / devfreq: Fix the wrong end with semicolon
PM / devfreq: Fix indentaion of devfreq_summary debugfs node
PM / devfreq: Clean up the devfreq instance name in sysfs attr
memory: samsung: exynos5422-dmc: Add module param to control IRQ mode
memory: samsung: exynos5422-dmc: Adjust polling interval and uptreshold
memory: samsung: exynos5422-dmc: Use delayed timer as default
PM / devfreq: Add support delayed timer for polling mode
dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandle
PM / devfreq: tegra: Add Dmitry as a maintainer
PM / devfreq: event: Fix trivial spelling
PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absent
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
That gives us ordering guarantees around the pair.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It turns out that wait_on_page_bit_common() had several problems,
ranging from just unfair behavioe due to re-queueing at the end of the
wait queue when re-trying, and an outright bug that could result in
missed wakeups (but probably never happened in practice).
This rewrites the whole logic to avoid both issues, by simply moving the
logic to check (and possibly take) the bit lock into the wakeup path
instead.
That makes everything much more straightforward, and means that we never
need to re-queue the wait entry: if we get woken up, we'll be notified
through WQ_FLAG_WOKEN, and the wait queue entry will have been removed,
and everything will have been done for us.
Link: https://lore.kernel.org/lkml/CAHk-=wjJA2Z3kUFb-5s=6+n0qbTs8ELqKFt9B3pH85a8fGD73w@mail.gmail.com/
Link: https://lore.kernel.org/lkml/alpine.LSU.2.11.2007221359450.1017@eggly.anvils/
Reported-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"A single fix for a potential deadlock when printing a message about
spurious interrupts"
* tag 'x86-urgent-2020-08-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/i8259: Use printk_deferred() to prevent deadlock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- clean the generated moc file for xconfig
- fix xconfig bugs, and revert some bad commits
* tag 'kbuild-fixes-v5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: remove redundant FORCE definition in scripts/Makefile.modpost
kconfig: qconf: remove wrong ConfigList::firstChild()
Revert "kconfig: qconf: don't show goback button on splitMode"
Revert "kconfig: qconf: Change title for the item window"
kconfig: qconf: remove "goBack" debug message
kconfig: qconf: use delete[] instead of delete to free array
kconfig: qconf: compile moc object separately
kconfig: qconf: use if_changed for qconf.moc rule
modpost: explain why we can't use strsep
|
|
Pull KVM fixes from Paolo Bonzini:
"Bugfixes and strengthening the validity checks on inputs from new
userspace APIs.
Now I know why I shouldn't prepare pull requests on the weekend, it's
hard to concentrate if your son is shouting about his latest Minecraft
builds in your ear. Fortunately all the patches were ready and I just
had to check the test results..."
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Fix disable pause loop exit/pause filtering capability on SVM
KVM: LAPIC: Prevent setting the tscdeadline timer if the lapic is hw disabled
KVM: arm64: Don't inherit exec permission across page-table levels
KVM: arm64: Prevent vcpu_has_ptrauth from generating OOL functions
KVM: nVMX: check for invalid hdr.vmx.flags
KVM: nVMX: check for required but missing VMCS12 in KVM_SET_NESTED_STATE
selftests: kvm: do not set guest mode flag
|
|
The same code exists a few lines above.
Fixes: 436b2ac603d5 ("modpost: invoke modpost only when input files are updated")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This function returns the first child object, but the returned pointer
is not compatible with (ConfigItem *).
Commit cc1c08edccaf ("kconfig: qconf: don't show goback button on
splitMode") uncovered this issue because using the pointer from this
function would make qconf crash. (https://lkml.org/lkml/2020/7/18/411)
This function does not work. Remove.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
There is no need to repeat the same data structure for a quirk.
Drop a duplicate and rename to be more generic.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Pull networking fixes from David Miller:
1) Encap offset calculation is incorrect in esp6, from Sabrina Dubroca.
2) Better parameter validation in pfkey_dump(), from Mark Salyzyn.
3) Fix several clang issues on powerpc in selftests, from Tanner Love.
4) cmsghdr_from_user_compat_to_kern() uses the wrong length, from Al
Viro.
5) Out of bounds access in mlx5e driver, from Raed Salem.
6) Fix transfer buffer memleak in lan78xx, from Johan Havold.
7) RCU fixups in rhashtable, from Herbert Xu.
8) Fix ipv6 nexthop refcnt leak, from Xiyu Yang.
9) vxlan FDB dump must be done under RCU, from Ido Schimmel.
10) Fix use after free in mlxsw, from Ido Schimmel.
11) Fix map leak in HASH_OF_MAPS bpf code, from Andrii Nakryiko.
12) Fix bug in mac80211 Tx ack status reporting, from Vasanthakumar
Thiagarajan.
13) Fix memory leaks in IPV6_ADDRFORM code, from Cong Wang.
14) Fix bpf program reference count leaks in mlx5 during
mlx5e_alloc_rq(), from Xin Xiong.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits)
vxlan: fix memleak of fdb
rds: Prevent kernel-infoleak in rds_notify_queue_get()
net/sched: The error lable position is corrected in ct_init_module
net/mlx5e: fix bpf_prog reference count leaks in mlx5e_alloc_rq
net/mlx5e: E-Switch, Specify flow_source for rule with no in_port
net/mlx5e: E-Switch, Add misc bit when misc fields changed for mirroring
net/mlx5e: CT: Support restore ipv6 tunnel
net: gemini: Fix missing clk_disable_unprepare() in error path of gemini_ethernet_port_probe()
ionic: unlock queue mutex in error path
atm: fix atm_dev refcnt leaks in atmtcp_remove_persistent
net: ethernet: mtk_eth_soc: fix MTU warnings
net: nixge: fix potential memory leak in nixge_probe()
devlink: ignore -EOPNOTSUPP errors on dumpit
rxrpc: Fix race between recvmsg and sendmsg on immediate call failure
MAINTAINERS: Replace Thor Thayer as Altera Triple Speed Ethernet maintainer
selftests/bpf: fix netdevsim trap_flow_action_cookie read
ipv6: fix memory leaks on IPV6_ADDRFORM path
net/bpfilter: Initialize pos in __bpfilter_process_sockopt
igb: reinit_locked() should be called with rtnl_lock
e1000e: continue to init PHY even when failed to disable ULP
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread fix from Christian Brauner:
"A simple spelling fix for dequeue_synchronous_signal()"
* tag 'for-linus-2020-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
signal: fix typo in dequeue_synchronous_signal()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tooling fixes from Arnaldo Carvalho de Melo:
- Fix libtraceevent build with binutils 2.35
- Fix memory leak in process_dynamic_array_len in libtraceevent
- Fix 'perf test 68' zstd compression for s390
- Fix record failure when mixed with ARM SPE event
* tag 'perf-tools-fixes-2020-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
libtraceevent: Fix build with binutils 2.35
perf tools: Fix record failure when mixed with ARM SPE event
perf tests: Fix test 68 zstd compression for s390
tools lib traceevent: Fix memory leak in process_dynamic_array_len
|
|
When vxlan interface is deleted, all fdbs are deleted by vxlan_flush().
vxlan_flush() flushes fdbs but it doesn't delete fdb, which contains
all-zeros-mac because it is deleted by vxlan_uninit().
But vxlan_uninit() deletes only the fdb, which contains both all-zeros-mac
and default vni.
So, the fdb, which contains both all-zeros-mac and non-default vni
will not be deleted.
Test commands:
ip link add vxlan0 type vxlan dstport 4789 external
ip link set vxlan0 up
bridge fdb add to 00:00:00:00:00:00 dst 172.0.0.1 dev vxlan0 via lo \
src_vni 10000 self permanent
ip link del vxlan0
kmemleak reports as follows:
unreferenced object 0xffff9486b25ced88 (size 96):
comm "bridge", pid 2151, jiffies 4294701712 (age 35506.901s)
hex dump (first 32 bytes):
02 00 00 00 ac 00 00 01 40 00 09 b1 86 94 ff ff ........@.......
46 02 00 00 00 00 00 00 a7 03 00 00 12 b5 6a 6b F.............jk
backtrace:
[<00000000c10cf651>] vxlan_fdb_append.part.51+0x3c/0xf0 [vxlan]
[<000000006b31a8d9>] vxlan_fdb_create+0x184/0x1a0 [vxlan]
[<0000000049399045>] vxlan_fdb_update+0x12f/0x220 [vxlan]
[<0000000090b1ef00>] vxlan_fdb_add+0x12a/0x1b0 [vxlan]
[<0000000056633c2c>] rtnl_fdb_add+0x187/0x270
[<00000000dd5dfb6b>] rtnetlink_rcv_msg+0x264/0x490
[<00000000fc44dd54>] netlink_rcv_skb+0x4a/0x110
[<00000000dff433e7>] netlink_unicast+0x18e/0x250
[<00000000b87fb421>] netlink_sendmsg+0x2e9/0x400
[<000000002ed55153>] ____sys_sendmsg+0x237/0x260
[<00000000faa51c66>] ___sys_sendmsg+0x88/0xd0
[<000000006c3982f1>] __sys_sendmsg+0x4e/0x80
[<00000000a8f875d2>] do_syscall_64+0x56/0xe0
[<000000003610eefa>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
unreferenced object 0xffff9486b1c40080 (size 128):
comm "bridge", pid 2157, jiffies 4294701754 (age 35506.866s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 f8 dc 42 b2 86 94 ff ff ..........B.....
6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
backtrace:
[<00000000a2981b60>] vxlan_fdb_create+0x67/0x1a0 [vxlan]
[<0000000049399045>] vxlan_fdb_update+0x12f/0x220 [vxlan]
[<0000000090b1ef00>] vxlan_fdb_add+0x12a/0x1b0 [vxlan]
[<0000000056633c2c>] rtnl_fdb_add+0x187/0x270
[<00000000dd5dfb6b>] rtnetlink_rcv_msg+0x264/0x490
[<00000000fc44dd54>] netlink_rcv_skb+0x4a/0x110
[<00000000dff433e7>] netlink_unicast+0x18e/0x250
[<00000000b87fb421>] netlink_sendmsg+0x2e9/0x400
[<000000002ed55153>] ____sys_sendmsg+0x237/0x260
[<00000000faa51c66>] ___sys_sendmsg+0x88/0xd0
[<000000006c3982f1>] __sys_sendmsg+0x4e/0x80
[<00000000a8f875d2>] do_syscall_64+0x56/0xe0
[<000000003610eefa>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 3ad7a4b141eb ("vxlan: support fdb and learning in COLLECT_METADATA mode")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fix from Linus Walleij:
"A single last minute pin control fix to the Qualcomm driver fixing
missing dual edge PCH interrupts"
* tag 'pinctrl-v5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: Handle broken/missing PDC dual edge IRQs on sc7180
|
|
As recently done with with send/recv, flip the if after
rw_verify_aread() in io_{read,write}() and tabulise left bits left.
This removes mispredicted by a compiler jump on the success/fast path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use a local var to collect flags in kiocb_set_rw_flags(). That spares
some memory writes and allows to replace most of the jumps with MOVEcc.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit cc1c08edccaf5317d99a17a3231fe06381044e83.
Maxim Levitsky reports 'make xconfig' crashes since that commit
(https://lkml.org/lkml/2020/7/18/411)
Or, the following is simple test code that makes it crash:
menu "Menu"
config FOO
bool "foo"
default y
menuconfig BAR
bool "bar"
depends on FOO
endmenu
Select the Split View mode, and double-click "bar" in the right
window, then you will see Segmentation fault.
When 'last' is not set for symbolMode, the following code in
ConfigList::updateList() calls firstChild().
item = last ? last->nextSibling() : firstChild();
However, the pointer returned by ConfigList::firstChild() does not
seem to be compatible with (ConfigItem *), which seems another bug.
I'd rather want to reconsider whether hiding the goback icon is the
right thing to do.
In the following test code, the Split View shows "Menu2" and "Menu3"
in the right window. You can descend into "Menu3", but there is no way
to ascend back to "Menu2" from "Menu3".
menu "Menu1"
config FOO
bool "foo"
default y
menu "Menu2"
depends on FOO
menu "Menu3"
config BAZ
bool "baz"
endmenu
endmenu
endmenu
It is true that the goback button is currently not functional due to
yet another bug, but hiding the problem is not the right way to go.
Anyway, Segmentation fault is fatal. Revert the offending commit for
now, and we should find the right solution.
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This reverts commit 5752ff07fd90d764d96e3c586cc95c09598abfdd.
It added dead code to ConfigList:ConfigList().
The constructor of ConfigList has the initializer, mode(singleMode).
if (mode == symbolMode)
setHeaderLabels(QStringList() << "Item" << "Name" << "N" << "M" << "Y" << "Value");
else
setHeaderLabels(QStringList() << "Option" << "Name" << "N" << "M" << "Y" << "Value");
... always takes the else part.
The change to ConfigList::updateSelection() is strange too.
When you click the split view icon for the first time, the titles in
both windows show "Option". After you click something in the right
window, the title suddenly changes to "Item".
ConfigList::updateSelection() is not the right place to do this,
at least. It was not a good idea, I think.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Every time the goback icon is clicked, the annoying message "goBack"
is displayed on the console.
I guess this line is the left-over debug code of commit af737b4defe1
("kconfig: qconf: simplify the goBack() logic").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
cppcheck reports "Mismatching allocation and deallocation".
$ cppcheck scripts/kconfig/qconf.cc
Checking scripts/kconfig/qconf.cc ...
scripts/kconfig/qconf.cc:1242:10: error: Mismatching allocation and deallocation: data [mismatchAllocDealloc]
delete data;
^
scripts/kconfig/qconf.cc:1236:15: note: Mismatching allocation and deallocation: data
char *data = new char[count + 1];
^
scripts/kconfig/qconf.cc:1242:10: note: Mismatching allocation and deallocation: data
delete data;
^
scripts/kconfig/qconf.cc:1255:10: error: Mismatching allocation and deallocation: data [mismatchAllocDealloc]
delete data;
^
scripts/kconfig/qconf.cc:1236:15: note: Mismatching allocation and deallocation: data
char *data = new char[count + 1];
^
scripts/kconfig/qconf.cc:1255:10: note: Mismatching allocation and deallocation: data
delete data;
^
Fixes: c4f7398bee9c ("kconfig: qconf: make debug links work again")
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Currently, qconf.moc is included from qconf.cc but they can be compiled
independently.
When you modify qconf.cc, qconf.moc does not need recompiling.
Rename qconf.moc to qconf-moc.cc, and split it out as an independent
compilation unit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Regenerate qconf.moc when the moc command is changed.
This also allows 'make mrproper' to clean it up. Previously, it was
not cleaned up because 'clean-files += qconf.moc' was missing.
Now 'make mrproper' correctly cleans it up because files listed in
'targets' are cleaned.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The sparse tool complains as follows:
drivers/platform/x86/thinkpad_acpi.c:9636:25: warning:
symbol 'dev_attr_charge_start_threshold' was not declared. Should it be static?
drivers/platform/x86/thinkpad_acpi.c:9642:25: warning:
symbol 'dev_attr_charge_stop_threshold' was not declared. Should it be static?
Those variables are not used outside of thinkpad_acpi.c, so this
commit marks them static.
Fixes: e33929537b76 ("platform/x86: thinkpad_acpi: use standard charge control attribute names")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongj |
