summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2019-07-02mfd: madera: Add Madera core support for CS47L92Richard Fitzgerald
This patch adds all the core support and defines for the Cirrus Logic CS42L92, CS47L92 and CS47L93 smart audio CODECs. Registers or fields are named MADERA_* if it is part of the common hardware platform and does not conflict with any other Madera codecs. It is named CS47L15_* if it is unique to CS47L15 and conflicts with definitions on other codecs. Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com> Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-02mfd: madera: Add Madera core support for CS47L15Richard Fitzgerald
This patch adds all the core support and defines for the Cirrus Logic CS47L15 smart audio CODEC. Registers or fields are named MADERA_* if it is part of the common hardware platform and does not conflict with any other Madera codecs. It is named CS47L15_* if it is unique to CS47L15 and conflicts with definitions on other codecs. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-02mfd: madera: Update DT bindings to add additional CODECsRichard Fitzgerald
This adds the cs47l15, cs42l92, cs47l92 and cs47l93 to the list of compatible strings and updates some properties that need to note the new CODECs. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-02mfd: madera: Add supply mapping for MICVDDCharles Keepax
Currently we are relying on the exact match of the regulator name to find MICVDD, we should add an explicit supply mapping to allow this to be found more reliably. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-02mfd: madera: Fix potential uninitialised use of variableStuart Henderson
regmap_read won't set val to anything if an ACKed bus fails. Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-02mfd: madera: Fix bad reference to pinctrl.txt fileOtto Sabart
The pinctrl.txt file was converted into reStructuredText and moved into driver-api folder. This patch updates the broken reference. Fixes: 5a9b73832e9e ("pinctrl.txt: move it to the driver-api book") Signed-off-by: Otto Sabart <ottosabart@seberm.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-02mfd: arizona: Fix undefined behaviorArnd Bergmann
When the driver is used with a subdevice that is disabled in the kernel configuration, clang gets a little confused about the control flow and fails to notice that n_subdevs is only uninitialized when subdevs is NULL, and we check for that, leading to a false-positive warning: drivers/mfd/arizona-core.c:1423:19: error: variable 'n_subdevs' is uninitialized when used here [-Werror,-Wuninitialized] subdevs, n_subdevs, NULL, 0, NULL); ^~~~~~~~~ drivers/mfd/arizona-core.c:999:15: note: initialize the variable 'n_subdevs' to silence this warning int n_subdevs, ret, i; ^ = 0 Ideally, we would rearrange the code to avoid all those early initializations and have an explicit exit in each disabled case, but it's much easier to chicken out and add one more initialization here to shut up the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-02mfd: core: Set fwnode for created devicesRobert Hancock
The logic for setting the of_node on devices created by mfd did not set the fwnode pointer to match, which caused fwnode-based APIs to malfunction on these devices since the fwnode pointer was null. Fix this. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-02mfd: intel-lpss: Keep device tables sorted by IDAndy Shevchenko
Easier to find and maintain if the device tables sorted by ID. Do it here for intel-lpss MFD driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-02mfd: menelaus: Remove superfluous error messageAlexandre Belloni
The RTC core already has error messages in case of failure, there is no need to have another message in the driver. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-02mfd: bd718x7: Make power button press duration configurableLeonard Crestez
Allow overwriting the values in BD718XX_REG_PWRONCONFIG0 and BD718XX_REG_PWRONCONFIG1 via devicetree. Read values in milliseconds and attempt to round them to something supported by the hardware. Keep existing values (from bootloader or OTP) if property is not present. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> [Lee: Fixed-up merge/API conflict] Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-02dt-bindings: mfd: Document short/long press duration for BD718X7Leonard Crestez
These values can be overwritten at probe time. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Acked-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-02mfd: bd718x7: Remove hardcoded config for button press durationLeonard Crestez
The reset button on imx8mm-evk is tied to PWRON_B pin of bd71847 and the long press duration is set to zero from OTP. The linux driver overrides those values and breaks reset from button. Overwriting OTP or bootloader configuration with some hardcoded defaults is not desirable, keep already programmed values instead. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Acked-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-02mfd: cros_ec: Register cros_ec_lid_angle driver when presentedGwendal Grignou
Register driver when EC indicates has precise lid angle calculation code running. Fix incorrect extra resource allocation in cros_ec_sensors_register(). Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-02mfd: madera: Add missing of table registrationDaniel Gomez
MODULE_DEVICE_TABLE(of, <of_match_table>) should be called to complete DT OF mathing mechanism and register it. Before this patch: modinfo ./drivers/mfd/madera.ko | grep alias After this patch: modinfo ./drivers/mfd/madera.ko | grep alias alias: of:N*T*Ccirrus,wm1840C* alias: of:N*T*Ccirrus,wm1840 alias: of:N*T*Ccirrus,cs47l91C* alias: of:N*T*Ccirrus,cs47l91 alias: of:N*T*Ccirrus,cs47l90C* alias: of:N*T*Ccirrus,cs47l90 alias: of:N*T*Ccirrus,cs47l85C* alias: of:N*T*Ccirrus,cs47l85 alias: of:N*T*Ccirrus,cs47l35C* alias: of:N*T*Ccirrus,cs47l35 Reported-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Daniel Gomez <dagmcr@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-07-02Merge branches 'ib-mfd-clk-gpio-power-regulator-rtc-5.3', ↵Lee Jones
'ib-mfd-clk-regulator-rtc-5.3', 'ib-mfd-cros-5.3' and 'ib-mfd-regulator-5.3' into ibs-for-mfd-merged
2019-07-02regulator: lp87565: Fix missing break in switch statementColin Ian King
Currently the LP87565_DEVICE_TYPE_LP87561_Q1 case does not have a break statement, causing it to fall through to a dev_err message. Fix this by adding in the missing break statement. Addresses-Coverity: ("Missing break in switch") Fixes: 7ee63bd74750 ("regulator: lp87565: Add 4-phase lp87561 regulator support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27clk: RK808: Add RK809 and RK817 support.Tony Xie
RK809 and RK817 are power management IC chips for multimedia products. most of their functions and registers are same, including the clkout funciton. Signed-off-by: Tony Xie <tony.xie@rock-chips.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27rtc: rk808: Add RK809 and RK817 support.Tony Xie
RK809 and RK817 are power management IC chips for multimedia products. Most of their functions and registers are same, including the rtc. Signed-off-by: Tony Xie <tony.xie@rock-chips.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27dt-bindings: mfd: rk808: Add binding information for RK809 and RK817.Tony Xie
Add device tree bindings documentation for Rockchip's RK809 & RK817 PMIC. Signed-off-by: Tony Xie <tony.xie@rock-chips.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27regulator: rk808: Add RK809 and RK817 support.Heiko Stuebner
Add support for the rk809 and rk817 regulator driver. Their specifications are as follows： 1. The RK809 and RK809 consist of 5 DCDCs, 9 LDOs and have the same registers for these components except dcdc5. 2. The dcdc5 is a boost dcdc for RK817 and is a buck for RK809. 3. The RK817 has one switch but The Rk809 has two. The output voltages are configurable and are meant to supply power to the main processor and other components. Signed-off-by: Tony Xie <tony.xie@rock-chips.com> Acked-by: Mark Brown <broonie@kernel.org> [rebased on top of 5.2-rc1] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27mfd: rk808: Add RK817 and RK809 supportTony Xie
The RK809 and RK817 are a Power Management IC (PMIC) for multimedia and handheld devices. They contains the following components: - Regulators - RTC - Clocking Both RK809 and RK817 chips are using a similar register map, so we can reuse the RTC and Clocking functionality. Most of regulators have a some implementation also. Signed-off-by: Tony Xie <tony.xie@rock-chips.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27power: supply: Initial support for ROHM BD70528 PMIC charger blockMatti Vaittinen
ROHM BD70528 PMIC includes battery charger block. Support charger staus queries and doing few basic settings like input current limit and charging current. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27rtc: bd70528: Initial support for ROHM bd70528 RTCMatti Vaittinen
Support RTC block in ROHM bd70528 power management IC. Support getting and setting the time and date as well as arming an alarm which can also be used to wake the PMIC from standby state. HW supports wake interrupt only for the next 24 hours (sec, minute and hour information only) so we limit also the alarm interrupt to this 24 hours for the sake of consistency. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27gpio: Initial support for ROHM bd70528 GPIO blockMatti Vaittinen
ROHM BD70528 PMIC has 4 GPIO pins. Allow them to be controlled by GPIO framework. IRQs are handled by regmap-irq and GPIO driver is not aware of the irq usage. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27dt-bindings: mfd: Document first ROHM BD70528 bindingsMatti Vaittinen
Document bindings for regulators (3 bucks, 3 LDOs and 2 LED drivers) and 4 GPIO pins which can be configured for I/O or as interrupt sources withe configurable trigger levels. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27clk: bd718x7: Support ROHM BD70528 clk blockMatti Vaittinen
ROHM BD70528 is an ultra low power PMIC with similar 32K clk as bd718x7. Only difference (from clk perspective) is register address. Add support for controlling BD70528 clk using bd718x7 driver. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27mfd: bd70528: Support ROHM bd70528 PMIC coreMatti Vaittinen
ROHM BD70528MWV is an ultra-low quiescent current general purpose single-chip power management IC for battery-powered portable devices. Add MFD core which enables chip access for following subdevices: - regulators/LED drivers - battery-charger - gpios - 32.768kHz clk - RTC - watchdog Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27mfd: regulator: clk: Split rohm-bd718x7.hMatti Vaittinen
Split the bd718x7.h to ROHM common and bd718x7 specific parts so that we do not need to add same things in every new ROHM PMIC header. Please note that this change requires changes also in bd718x7 sub-device drivers for regulators and clk. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-17regulator: lp87565: Add 4-phase lp87561 regulator supportKeerthy
The LP8756x family has a single output 4-phase regulator configuration. Add support for the same. The control lies in the master buck which is buck0 for 4-phase configuration. Enable/disable/voltage set happen via buck0 registers. Data Sheet: https://www.ti.com/lit/ds/symlink/lp87561-q1.pdf Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-17mfd: lp87565: Add support for 4-phase LP87561 combinationKeerthy
Add support for 4-phase LP87561 combination. Data Sheet: https://www.ti.com/lit/ds/symlink/lp87561-q1.pdf Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-17dt-bindings: mfd: lp87565: Add LP87561 configurationKeerthy
lp87561 is a single output 4-phase regulator configuration. Add support for the same. Data Sheet: https://www.ti.com/lit/ds/symlink/lp87561-q1.pdf Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-10mfd: cros_ec: Update I2S APIGwendal Grignou
Improve I2S API. Rename ec_response_codec_gain into ec_codec_i2s_gain, update caller accordlingly. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-10mfd: cros_ec: Add Management API entry pointsGwendal Grignou
Add commands for test and management. Add command space for future development. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-10mfd: cros_ec: Add SKU ID and Secure storage APIGwendal Grignou
Add API to store SKU, Cros board information in EC flash memory. Add API to store security data in EC. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-10mfd: cros_ec: Add API for rwsigGwendal Grignou
Add command to retrieve signature of image stored in the RW memory slot(s). Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-10mfd: cros_ec: Add API for Fingerprint supportGwendal Grignou
Add API for fingerprint sensor presented by embedded controller. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-10mfd: cros_ec: Add API for Touchpad supportGwendal Grignou
Add API to control touchpad presented by Embedded Controller. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-10mfd: cros_ec: Add API for EC-EC communicationGwendal Grignou
Allow EC to talk to other ECs that are not presented to the host. Neeed when EC are present in detachable keyboard. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-10mfd: cros_ec: Add I2C passthru protection APIGwendal Grignou
Prevent direct i2c access to device behind EC when not in development mode. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-10mfd: cros_ec: Add Smart Battery Firmware update APIGwendal Grignou
Add API to update battery firmware. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-10mfd: cros_ec: Add Hibernate APIGwendal Grignou
Add support for controlling hibernation of the Embedded Controller. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-10mfd: cros_ec: Add API for keyboard testingGwendal Grignou
Add command to allow keyboard testing in factory. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-10mfd: cros_ec: Complete Power and USB PD APIGwendal Grignou
Improve API for USB Powe delivery and power management. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-10mfd: cros_ec: Fix temperature APIGwendal Grignou
Improve API to retrieve temperature information. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-10mfd: cros_ec: Add fingerprint APIGwendal Grignou
Add support for fingerprint sensors managed by embedded controller. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-10mfd: cros_ec: Fix event processing APIGwendal Grignou
Improve API between EC and Host to report events. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-10mfd: cros_ec: Complete MEMS sensor APIGwendal Grignou
Add new command for batched mode, add support for more sensors. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-10mfd: cros_ec: Add EC transport protocol v4Gwendal Grignou
Introduce a new transport procotol between EC and host. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-10mfd: cros_ec: Expand hash APIGwendal Grignou
Improve API to verify EC image signature. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Benson Leung <bleung@chromium.org> Reviewed-by: Fabien Lahoudere <fabien.lahoudere@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-11 23:49:30 +0000