summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2005-07-02[SCSI] lpfc: Fix ADISC completion incorrectly putting initiators on mapped listJames.Smart@Emulex.Com
Symptom - An unmapped node (initiator) that goes away in a situation such as cable pull, comes back as a mapped node. Fix - On ADISC completion, put a list on the mapped list only if it is a FCP_TARGET. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Add completion handler to the abort iocbsJames.Smart@Emulex.Com
Add completion handler to the abort iocbs to close a hole where we could reuse an iotag. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Fix LS_RJT never sent by lpfc_els_unsol_event()James.Smart@Emulex.Com
lpfc_els_unsol_event() checks rjt_err to determine is LS_RJT should be sent. However, rjt_err was set to LSEXP_NOTHING_ELSE (which is 0) in cases where an LS_RJT should be sent, so rjt_err was never true. Change lpfc_els_unsol_event() to set rjt_err to 1 when LS_RJT should be sent. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Add LP6000 PCI IDJames.Smart@Emulex.Com
Fix driver not seeing LP6000. Fix: add PCI id to the pci_device_id table and a short description for the HBA in get_hba_model_desc(). Also add a default clause to the switch statement that parses the various PCI ID's. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Set max_sectors in host templateJames.Smart@Emulex.Com
Add max_sectors to the driver host template and initialize it with 0xFFFF since the driver has no limitations on the size a transfer contained by a scsi command and that fits within the sg_tablesize provisioned by the driver. This fixes a performance issue seen in some configurations. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Fix error loading on sparcJames.Smart@Emulex.Com
Bug reported via SourceForge - lpfc does not load on sparc. The lpfc driver must byteswap all FCP IOCBs to recover the data into cpu native format. Also correct issue of "iotag not found" messages Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Fixes in mbox_timeout_handlerJames.Smart@Emulex.Com
Analysis: Timeout of READ_SPARM64 causes call to lpfc_mbox_timeout_handler which reads psli->mbox_active to determine the timeout mbox. Timeout handler then NULL's psli->mbox_active and calls lpfc_mbx_cmpl_read_sparam(), which on timeout condition, calls link_down(). link_down() now calls disc_done() which calls mbox_timeout_hander() again since WORKER_MBOX_TMO is still set, which goes back to read psli->mbox_active which is already NULL'ed. Remove redundant if statement in lpfc_mbox_timeout_handler. pmbox is assigned psli->mbox_active so there is no need to check if it actually equals psli->mbox_active. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] Fix issue where all hosts log nodev message for other initiatorsJames.Smart@Emulex.Com
Fix issue where all hosts connected to SAN get spammed with nodev message when other initiators go away. Display nodev message only when FC targets go away. However this behavior will be overridden if LOG_DISCOVERY is set. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: hgp/pgp cleanupsJames.Smart@Emulex.Com
From: Christoph Hellwig <hch@lst.de>: - rename PGP/HPH to lpfc_pgp/lpfc_hgp - use __le32 types for the members to start fixing sparse -Wbitwise issues - remove lpfc_sli.MBhostaddr, we can always use the pointer from SLI2_DESC directly Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-01[SCSI] - mptfusion - convert to new change_queue_depth APIMoore, Eric Dean
Convert driver to use new change_queue_depth API. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Fixed up rejections and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] aic7xxx: correct target valid check in aic7xxx_proc.cJames Bottomley
From: Andy Whitcroft <apw@shadowen.org> Updated to remove the bogus translated target check. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] use list_for_each_entry_safe in scsi_error.cChristoph Hellwig
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] remove scsi_eh_eflags_ macrosChristoph Hellwig
Just opencoded access to eh_eflags, it's much more readable anyway. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] remove scsi_cmnd->stateChristoph Hellwig
We never look at it except for the old megaraid driver that abuses it for sending internal commands. That usage can be fixed easily because those internal commands are single-threaded by a mutex and we can easily use a completion there. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] remove scsi_cmnd->ownerChristoph Hellwig
never checked anywhere Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] remove scsi_cmnd->abort_reasonChristoph Hellwig
Never used for anything but printing it out in debug routines. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] remove scsi_cmnd.eh_stateChristoph Hellwig
it's never set to anything, and just three broken drivers are looking at it and doing odd things. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] megaraid: fix compilation after eh locking changesJames Bottomley
From: Christoph Hellwig <hch@lst.de> Patch fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] aacraid: New products patchMark Haverkamp
This patch add the following products to the driver: IBM ServeRAID 8i ICP 9014R0 ICP 9024R0 ICP 9047MA ICP 9087MA ICP 9085LI ICP 5085AU Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] remove scsi_set_deviceChristoph Hellwig
scsi_add_host is the proper place to set the device, but people copy the scsi_set_device usage from older drivers again and again. note that this leaves some legacy drivers like qlogicisp/qlogicfc without pci association in sysfs, but they're scheduled to go away soon anyway. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] scsi/qla1280: replace schedule_timeout() with ssleep()Nishanth Aravamudan
Use ssleep() instead of schedule_timeout to guarantee the task delays as expected. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-25Fix up try_to_freeze() usage in arch/i386/kernel/signal.cLinus Torvalds
The parentheses were missing. Noted by Pavel Machek.
2005-06-25Merge Christoph's freeze cleanup patchLinus Torvalds
2005-06-25[PATCH] Cleanup patch for process freezingChristoph Lameter
1. Establish a simple API for process freezing defined in linux/include/sched.h: frozen(process) Check for frozen process freezing(process) Check if a process is being frozen freeze(process) Tell a process to freeze (go to refrigerator) thaw_process(process) Restart process frozen_process(process) Process is frozen now 2. Remove all references to PF_FREEZE and PF_FROZEN from all kernel sources except sched.h 3. Fix numerous locations where try_to_freeze is manually done by a driver 4. Remove the argument that is no longer necessary from two function calls. 5. Some whitespace cleanup 6. Clear potential race in refrigerator (provides an open window of PF_FREEZE cleared before setting PF_FROZEN, recalc_sigpending does not check PF_FROZEN). This patch does not address the problem of freeze_processes() violating the rule that a task may only modify its own flags by setting PF_FREEZE. This is not clean in an SMP environment. freeze(process) is therefore not SMP safe! Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] schedule the obsolete raw driver for removalAdrian Bunk
Since kernel 2.6.3 the Kconfig text explicitely stated this driver was obsolete. (trolling for IBMers) Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] list_for_each_entry: fs-dquot.cDomen Puncer
Make code more readable with list_for_each_entry_safe. Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Maximilian Attems <janitor@sternwelten.at> Signed-off-by: Domen Puncer <domen@coderock.org> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] drivers/char/rio/: kill rio_udelayAdrian Bunk
There's no need for a function that only calls udelay. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] MAINTAINERS: document that uclinux-dev@uclinux.org is subscribers-onlyAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] DCO: use IANA-reserved second level domain nameAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] serial/68328serial: replace schedule_timeout() with ↵Nishanth Aravamudan
msleep_interruptible() Use msleep_interruptible() instead of schedule_timeout() in send_break() to guarantee the task delays as expected. Change @duration's units to milliseconds, and modify arguments in callers appropriately. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] serial/68360serial: replace schedule_timeout() with ↵Nishanth Aravamudan
msleep_interruptible() Use msleep_interruptible() instead of schedule_timeout() in send_break() to guarantee the task delays as expected. Change @duration's units to milliseconds, and modify arguments in callers appropriately. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] Remove duplicate file in Documentation/networkingTobias Klauser
The files wanpipe.txt and wan-router.txt in Documentation/networking contain the exact same information (diff between the two shows no document is "Linux WAN Router Utilities Package" and therefor the name wan-router.txt is more appropriate. Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] Remove duplicate file in Documentation/networking (00-INDEX)Tobias Klauser
wanpipe.txt and wan-router.txt in Documentation/networking contain the exact same information (diff between the two shows no Documentation/networking/00-INDEX as pointed out by Randy Dunlap. Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] Remove duplicate file in Documentation/networking ↵Tobias Klauser
(drivers_net_wan_Kconfig) wanpipe.txt and wan-router.txt in Documentation/networking contain the exact same information (diff between the two shows no drivers/net/wan/Kconfig. Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] sound/oss/cmpci: Use the DMA_32BIT_MASK constantTobias Klauser
Use the DMA_32BIT_MASK constant from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] sound/oss/es1370: Use the DMA_32BIT_MASK constantTobias Klauser
Use the DMA_32BIT_MASK constant from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] sound/oss/es1371: Use the DMA_32BIT_MASK constantTobias Klauser
Use the DMA_32BIT_MASK constant from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] sound/oss/esssolo1: Use the DMA_32BIT_MASK constantTobias Klauser
Use the DMA_32BIT_MASK constant from dma-mapping.h when calling pci_set_dma_mask() or pci_set_consistent_dma_mask() See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] printk: arch/i386/mm/pgtable.cChristophe Lucas
printk() calls should include appropriate KERN_* constant. Signed-off-by: Christophe Lucas <clucas@rotomalug.org> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] printk: arch/i386/mm/ioremap.cChristophe Lucas
printk() calls should include appropriate KERN_* constant. Signed-off-by: Christophe Lucas <clucas@rotomalug.org> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] Kill signed charsJ.A. Magallon
scripts/ is full of mismatches between char* params an signed char* arguments, and viceversa. gcc4 now complaints loud about this. Patch below deletes all those 'signed'. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] update comment about gzip scratch sizeOlaf Hering
fix a comment about the array size. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] ll_merge_requests_fn() cleanupNikita Danilov
ll_merge_requests_fn() assigns total_{phys,hw}_segments twice. Fix this and a typo. Signed-off-by: Nikita Danilov <nikita@clusterfs.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] drivers/isdn/hisax/: possible cleanupsAdrian Bunk
This patch contains the following possible cleanups: - make needlessly global code static - remove the compiled but unused st5481_hdlc.{c,h} - kill enternow.h - enternow_pci.c: kill InByte/OutByte/BYTE - isdnl2.c: kill FreeSkb - remove or #if 0 the following unused functions: - config.c: IsdnCardState - ipacx.c: ipacx_new_ph - ipacx.c: dch_bh - ipacx.c: setup_ipacx - isdnl2.c: IsRR Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Kai Germaschewski <kai@germaschewski.name> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] drivers/cdrom/cm206.c: cleanupsAdrian Bunk
This patch contains the following cleanups: - make needlessly global functions static - remove the following unused global function: - cm206_delay Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] drivers/char/ip2*: cleanupsAdrian Bunk
This patch contains the following cleanups: - i2cmd.c: #if 0 the unused function i2cmdUnixFlags - i2cmd.c: make the needlessly global funciton i2cmdBaudDef static - ip2main.c: remove dead code that wasn't reachable due to an #ifdef Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] kfree cleanups for drivers/firmware/Jesper Juhl
Here's a patch with kfree() cleanups for drivers/firmware/efivars.c Patch removes redundant NULL checks before kfree and also makes a small whitespace cleanup - moves two statements on same line to separate lines. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Acked-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] kfree cleanups in ixj.cJesper Juhl
This patch removes redundant checks for NULL pointer before kfree() in drivers/telephony/ Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] remove pointless NULL check before kfree in sony535.cJesper Juhl
There's no need to check for NULL, kfree() can cope. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] update Computone MAINTAINERS entryAdrian Bunk
This patch states that Michael still maintains this driver and removes a no longer mailing list. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-03 13:06:21 +0000