summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-02-15ALSA: Echoaudio - Add firmware cache #1Giuliano Pochini
Changes the way the firmware is passed through functions. When CONFIG_PM is enabled the firmware cannot be released because the driver will need it again to resume the card. With this patch the firmware is passed as an index of the struct firmware card_fw[] in place of a pointer. That same index is then used to locate the firmware in the firmware cache. Signed-off-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-02-12Merge remote branch 'alsa/devel' into topic/miscTakashi Iwai
2010-02-11ALSA: usbmixer - add possibility to remap dB valuesJaroslav Kysela
USB devices tends to represent dB ranges in different way than ALSA expects. Add possibility to override these values and add guessed values for SoundBlaster MP3+. Also rename 'Capture Input Source' control to 'Capture Source' for SoundBlaster MP3+ and Extigy. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-02-09sound: use DEFINE_PCI_DEVICE_TABLEAlexey Dobriyan
Use DEFINE_PCI_DEVICE_TABLE() to make PCI device ids go to .devinit.rodata section, so they can be discarded in some cases, and make them const. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-02-05ALSA: ice1712: fix: lock samplerate when samplerate locking is enabledSebastien Alaiwan
I found that the sampling rate locking setting of the ice1712 sound driver was only half-respected : when the driver was locked to, let's say, 44100Hz, and a usermode app was requesting 48000Hz playback, the request was succesful although the soundcard would continue to run at 44100Hz. Here's a patch that will make those requests to fail. Signed-off-by: Sebastien Alaiwan <sebastien.alaiwan@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-02-02ALSA: dummy driver - add model parameterJaroslav Kysela
This is a cleanup for the dummy driver. The model kernel module parameter is introduced to select the soundcard emulation. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-02-02ALSA: trivial: sound seq ioctl dbg: print hexadecimal value padded with 0sThadeu Lima de Souza Cascardo
Instead of padding with blanks and printing "number=0x a", print "number=0x0a". Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-02-01Merge remote branch 'alsa/devel' into topic/miscTakashi Iwai
2010-02-01sound: control: fix minimum TLV lengthClemens Ladisch
Allow TLV blocks that do not have any values; the smallest possible TLV is an empty container or one where the information is only in the tag. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-02-01sound: control: actually allow TLV command accessClemens Ladisch
Creating a control with TLV_COMMAND access was not possible because snd_ctl_new1() forgot to include it in the mask of allowable access bits. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-01-27ALSA: pcm_native - fix runtime->boundary calculationJaroslav Kysela
The code in pcm_lib updating runtime->hw_ptr_interrupt expects that runtime->boundary is divisible with runtime->period_size. Thanks are going to Clemens Ladisch for the notice. Fix the runtime->boundary calculation using buffer_size * period_size as base and find a least common multiple for 32bit platforms when the expression might overflow. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-01-26Merge remote branch 'alsa/devel' into topic/miscTakashi Iwai
2010-01-26ALSA: pcm_lib - return back hw_ptr_interruptJaroslav Kysela
Clemens Ladisch noted for hw_ptr_removal in "cleanup & merge hw_ptr update functions" commit: "It is possible for the status/delay ioctls to be called when the sound card's pointer register alreay shows a position at the beginning of the new period, but immediately before the interrupt is actually executed. (This happens regularly on a SMP machine with mplayer.) When that happens, the code thinks that the position must be at least one period ahead of the current position and drops an entire buffer of data." Return back the hw_ptr_interrupt variable. The last interrupt pointer is always computed from the latest hw_ptr instead of tracking it separately (in this case all hw_ptr checks and modifications might influence also hw_ptr_interrupt and it is difficult to keep it consistent). Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-01-26ALSA: cs46xx: Fix cpu idling with resumeFlorian Zumbiehl
Make sure that capture DMA doesn't stay enabled after system resume as that potentially prevents the processor from entering deep sleep states. Signed-off-by: Florian Zumbiehl <florz@florz.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-01-21Merge branch 'topic/noncached-mmap' into topic/miscTakashi Iwai
2010-01-21ALSA: hda - AD1988 codec - fix SPDIF-input mixer initialization (unmute)Jaroslav Kysela
The SPDIF-input pin 0x1c is muted by default in hardware. Unmute appropriate pin to get captured samples instead zeros. Tested on Lenovo Thinkstation. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-01-21Merge remote branch 'alsa/devel' into topic/miscTakashi Iwai
2010-01-21ALSA: pcm_core: Fix wake_up() optimizationJaroslav Kysela
This change fixes the "ALSA: pcm_lib - optimize wake_up() calls for PCM I/O" commit. New sleeping queue is introduced to separate user space and kernel space wake_ups. runtime->nowake is renamed to twake (transfer wake). Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-01-18Merge remote branch 'alsa/devel' into topic/miscTakashi Iwai
2010-01-18sound: virtuoso: add Xonar DS supportClemens Ladisch
Add experimental support for the Asus Xonar DS. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-01-18sound: seq_timer: simplify snd_seq_timer_set_tick_resolution() parametersClemens Ladisch
As snd_seq_timer_set_tick_resolution() is always called with the same three fields of struct snd_seq_timer, it suffices to give that as the only parameter. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-01-18ALSA: pcm - Call pgprot_noncached() for vmalloc'ed buffersTakashi Iwai
pgprot_noncached() can be set for vmalloc'ed buffers safely, and we'd need non-cached behavior more or less, even for the intermediate ring- buffers. Now snd_pcm_lib_mmap_vmalloc() is added as the common PCM mmap callback that is coupled with snd_pcm_lib_alloc_vmalloc_buffer() & co. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-01-18ALSA: pcm - Remove unneeded ifdef pgprot_noncachedTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-01-14ALSA: ctxfi - Add subsystem optionTakashi Iwai
Added a new option "subsystem" to override the PCI SSID for identifying the card type. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-01-14ALSA: Add snd_pci_quirk_lookup_id()Takashi Iwai
Added a new function to look up a quirk entry with the given PCI SSID instead of a pci device pointer. This can be used when the searched ID is overridden for debugging or such a purpose. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-01-13Merge branch 'devel' of git.alsa-project.org:alsa-kernel into topic/miscTakashi Iwai
2010-01-13ALSA: pcm_lib - fix wrong delta print for jiffies checkJaroslav Kysela
The previous jiffies delta was 0 in all cases. Use hw_ptr variable to store and print original value. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-01-12sound_oss: remove use of old BKL ioctl pathAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-01-12Merge commit alsa/devel into topic/miscTakashi Iwai
Conflicts: include/sound/version.h
2010-01-08ALSA: hda - support OLPC XO-1.5 DC inputDaniel Drake
The XO's audio hardware is wired up to allow DC sensors (e.g. light sensors, thermistors, etc) to be plugged in through the microphone jack. Add sound mixer controls to allow this mode to be enabled and tweaked. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-01-08ALSA: hda - Configure XO-1.5 microphones at capture timeDaniel Drake
The XO-1.5 has a microphone LED designed to indicate to the user when something is being recorded. This light is controlled by the microphone bias voltage and it is currently coming on all the time. This patch defers the microphone port configuration until when recording is actually taking place, fixing the behaviour of the LED. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-01-08Merge branch 'topic/hda' of ↵Jaroslav Kysela
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into devel
2010-01-08ALSA: hda - conexant - Fixed microphone mixer for HP Compaq Presario F700Ken Prox
Added patch for Hewlett-Packard Company Device Subsystem id - 103c:30ea. Signed-off-by: Ken Prox <kprox@users.sourceforge.net> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-01-08ALSA: ac97_codec: merge WM9703 and WM9705 opsKrzysztof Helt
The WM9705 and WM9703 ops are the same actually so use the same code for both. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-01-08ALSA: pcm_lib: fix "something must be really wrong" conditionJaroslav Kysela
When runtime->periods == 1 or when pointer crosses end of ring buffer, the delta might be greater than buffer_size. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-01-07ALSA: pcm_lib - optimize wake_up() calls for PCM I/OJaroslav Kysela
As noted by pl bossart <bossart.nospam@gmail.com>, the PCM I/O routines (snd_pcm_lib_write1, snd_pcm_lib_read1) should block wake_up() calls until all samples are not processed. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-01-07ALSA: pcm_lib - cleanup & merge hw_ptr update functionsJaroslav Kysela
Do general cleanup in snd_pcm_update_hw_ptr*() routines and merge them. The main change is hw_ptr_interrupt variable removal to simplify code logic. This variable can be computed directly from hw_ptr. Ensure that updated hw_ptr is not lower than previous one (it was possible with old code in some obscure situations when interrupt was delayed or the lowlevel driver returns wrong ring buffer position value). Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-01-07ALSA: pcm_lib - add possibility to log last 10 DMA ring buffer positionsJaroslav Kysela
In some debug cases, it might be usefull to see previous ring buffer positions to determine position problems from the lowlevel drivers. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-01-07ALSA: pcm_lib.c - convert second xrun_debug() parameter to use definesJaroslav Kysela
To increase code readability, convert send xrun_debug() argument to use defines. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2009-12-28ALSA: Release v1.0.22.1Jaroslav Kysela
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2009-12-28ALSA: usb-audio: use usbquirk.h for detection of HVR-950Q/850John S. Gruber
Detect the HVR-950Q HVR-850 urb data alignment quirk using usbquirk.h rather than using a case statement in snd_usb_audio_probe. Signed-off-by: John S. Gruber <JohnSGruber@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-28ALSA: usb-audio: relax urb data align. restriction HVR-950Q and HVR-850 onlyJohn S. Gruber
Addressing audio quality problem. In sound/usb/usbaudio.c, for the Hauppage HVR-950Q and HVR-850 only, change retire_capture_urb to allow transfers on audio sub-slot boundaries rather than audio slots boundaries. With these devices the left and right channel samples can be split between two different urbs. Throwing away extra channel samples causes a sound quality problem for stereo streams as the left and right channels are swapped repeatedly, perhaps many times per second. Urbs unaligned on sub-slot boundaries are still truncated to the next lowest stride (audio slot) to retain synchronization on samples even though left/right channel synchronization may be lost in this case. Detect the quirk using a case statement in snd_usb_audio_probe. BugLink: https://bugs.launchpad.net/ubuntu/+bug/495745 Signed-off-by: John S. Gruber <JohnSGruber@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-28ALSA: usb-audio: make buffer pointer based on bytes instead on framesClemens Ladisch
Since there are devices that do not align the size of their data packets to frame boundaries, the driver needs to be able to keep track of partial frames. This patch prepares for support for such devices by changing the hwptr_done variable from a frame counter to a byte counter. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-28ALSA: usb-audio - Added functionality for E-mu 0404USB/0202USB/TrackerPreSergiy Kovalchuk
Added functionality: 1) Extension Units support (all XU settings now available at alsamixer, kmix, etc): - "AnalogueIn soft limiter" switch; - "Sample rate" selector (values 0,1,2,3,4,5 corresponds to 44.1 48 ... 192 kHz); - "DigitalIn CLK source" selector (internal/external) (**); - "DigitalOut format SPDIF/AC3" switch (**); (**)E-mu-0404usb only. 2) Automatic device sample rate adjustment depending on substream samplerate for both capture and playback substream. [minor coding-style fixes by tiwai] Signed-off-by: Sergiy Kovalchuk <cnb_zerg@yahoo.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-28ALSA: hda: Refactor powerdown for Realtek HDA codecsDaniel T Chen
This patch converts the alc889 Aspire-specific powerdown to a generic one. Like the previous effort, it currently only handles Front and PCM but can be easily extended to cover other nids. The existing hook for alc889 Aspire-specific remains enabled. Upon further testing, I've added its use for ALC861_AUTO as well. Following patches will enable them for other quirks. Tested-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-28ALSA: hda: Add powerdown for Analog Devices HDA codecsDaniel T Chen
This patch ports powerdown fixes to AD198x. Currently we only turn off Front and HP for suspend, but this is easily extended for additional nids. Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-27ALSA: hda - Use strict_strtoul()Takashi Iwai
Rewrite the codes to use strict_strtoul() instead of simple_strtoul(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-27ALSA: hda - Add sanity check for storing the user-defined pin configsTakashi Iwai
Check whether the given NID is a pin widget before storing the user-defined pin configs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-27ALSA: hda - Fix click noises at suspend/free with Realtek codecsTakashi Iwai
Call snd_hda_shutup_pins() at suspend and free for avoiding click noises. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-27ALSA: hda - Add snd_hda_shutup_pins() helper functionTakashi Iwai
Add a common helper function for clearing pin controls before suspend. Use the pincfg array instead of looking through all widget tree. Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-16 06:38:07 +0000