summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2020-07-08Merge branch 'bnxt_en-Driver-update-for-net-next'David S. Miller
Michael Chan says: ==================== bnxt_en: Driver update for net-next. This patchset implements ethtool -X to setup user-defined RSS indirection table. The new infrastructure also allows the proper logical ring index to be used to populate the RSS indirection when queried by ethtool -x. Prior to these patches, we were incorrectly populating the output of ethtool -x with internal ring IDs which would make no sense to the user. The last 2 patches add some cleanups to the VLAN acceleration logic and check the firmware capabilities before allowing VLAN acceleration offloads. v4: Move bnxt_get_rxfh_indir_size() fix to a new patch #2. Modify patch #7 to revert RSS map to default only when necessary. v3: Use ALIGN() in patch 5. Add warning messages in patch 6. v2: Some RSS indirection table changes requested by Jakub Kicinski. ==================== Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08bnxt_en: allow firmware to disable VLAN offloadsEdwin Peer
Bare-metal use cases require giving firmware and the embedded application processor control over VLAN offloads. The driver should not attempt to override or utilize this feature in such scenarios since it will not work as expected. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08bnxt_en: clean up VLAN feature bit handlingEdwin Peer
The hardware VLAN offload feature on our NIC does not have separate knobs for handling customer and service tags on RX. Either offloading of both must be enabled or both must be disabled. Introduce definitions for the combined feature set in order to clean up the code and make this constraint more clear. Technically these features can be separately enabled on TX, however, since the default is to turn both on, the combined TX feature set is also introduced for code consistency. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08bnxt_en: Implement ethtool -X to set indirection table.Michael Chan
With the new infrastructure in place, we can now support the setting of the indirection table from ethtool. When changing channels, in a rare case that firmware cannot reserve the rings that were promised, we will still try to keep the RSS map and only revert to default when absolutely necessary. v4: Revert RSS map to default during ring change only when absolutely necessary. v3: Add warning messages when firmware cannot reserve the requested RX rings, and when the RSS table entries have to change to default. v2: When changing channels, if the RSS table size changes and RSS map is non-default, return error. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08bnxt_en: Return correct RSS indirection table entries to ethtool -x.Michael Chan
Now that we have the logical indirection table, we can return these proper logical indices directly to ethtool -x instead of the physical IDs. Reported-by: Jakub Kicinski <kicinski@fb.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08bnxt_en: Fill HW RSS table from the RSS logical indirection table.Michael Chan
Now that we have the logical table, we can fill the HW RSS table using the logical table's entries and converting them to the HW specific format. Re-initialize the logical table to standard distribution if the number of RX rings changes during ring reservation. v4: Use bnxt_get_rxfh_indir_size() to get the RSS table size. v2: Use ALIGN() to roundup the RSS table size. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08bnxt_en: Add helper function to return the number of RSS contexts.Michael Chan
On some chips, this varies based on the number of RX rings. Add this helper function and refactor the existing code to use it. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08bnxt_en: Add logical RSS indirection table structure.Michael Chan
The driver currently does not keep track of the logical RSS indirection table. The hardware RSS table is set up with standard default ring distribution when initializing the chip. This makes it difficult to support user sepcified indirection table entries. As a first step, add the logical table in the main bnxt structure and allocate it according to chip specific table size. Add a function that sets up default RSS distribution based on the number of RX rings. v4: Use bnxt_get_rxfh_indir_size() for the current RSS table size. v2: Use kmalloc_array() since we init. all entries afterwards. Use ALIGN() to roundup the RSS table size. Use ethtool_rxfh_indir_default() to init. the default entries. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08bnxt_en: Fix up bnxt_get_rxfh_indir_size().Michael Chan
Fix up bnxt_get_rxfh_indir_size() to return the proper current RSS table size for P5 chips. Change it to non-static so that bnxt.c can use it to get the table size. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08bnxt_en: Set up the chip specific RSS table size.Michael Chan
Currently, we allocate one page for the hardware DMA RSS indirection table. While the size is currently big enough for all chips, future chip variations may support bigger sizes, so it is better to calculate and store the chip specific size and allocate accordingly. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter updates for net-next: 1) Support for rejecting packets from the prerouting chain, from Laura Garcia Liebana. 2) Remove useless assignment in pipapo, from Stefano Brivio. 3) On demand hook registration in IPVS, from Julian Anastasov. 4) Expire IPVS connection from process context to not overload timers, also from Julian. 5) Fallback to conntrack TCP tracker to handle connection reuse in IPVS, from Julian Anastasov. 6) Several patches to support for chain bindings. 7) Expose enum nft_chain_flags through UAPI. 8) Reject unsupported chain flags from the netlink control plane. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08Merge branch 'net-phy-Uninline-PHY-ethtool-statistics'David S. Miller
Florian Fainelli says: ==================== net: phy: Uninline PHY ethtool statistics Now that we have introduced ethtool_phy_ops we can uninline those operations and move them back into phy.c where they belong. Since those functions are used by DSA, we need to continue exporting those symbols. It might be possible to remove ndo_get_ethtool_phy_stats in a subsequent patch since we could have DSA register its own ethtool_phy_ops instance instead of overloading the ethtool_ops. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08net: phy: Uninline PHY ethtool statistics operationsFlorian Fainelli
Now that we have moved the PHY ethtool statistics to be dynamically registered, we no longer need to inline those for ethtool. This used to be done to avoid cross symbol referencing and allow ethtool to be decoupled from PHYLIB entirely. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08net: phy: Define PHY statistics ethtool_phy_opsFlorian Fainelli
Extend ethtool_phy_ops to include the 3 function pointers necessary for implementing PHY statistics. In a subsequent change we will uninline those functions. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08Replace HTTP links with HTTPS ones: ATMEL MACB ETHERNET DRIVERAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08net: dsa: loop: Print when registration is successfulFlorian Fainelli
We have a number of error conditions that can lead to the driver not probing successfully, move the print when we are sure dsa_register_switch() has suceeded. This avoids repeated prints in case of probe deferral for instance. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net: sfp: add error checking with sfp_irq_nameChris Healy
Add error checking with sfp_irq_name before use. Signed-off-by: Chris Healy <cphealy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net/sched: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07Replace HTTP links with HTTPS ones: X.25 network layerAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07Replace HTTP links with HTTPS ones: GRETH 10/100/1G Ethernet MAC device driverAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07bnx2x: fix spelling mistake "occurd" -> "occurred"Colin Ian King
There are spelling mistakes in various literal strings. Fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07Merge branch 'net-ethtool-Untangle-PHYLIB-dependency'David S. Miller
Florian Fainelli says: ==================== net: ethtool: Untangle PHYLIB dependency This patch series untangles the ethtool netlink dependency with PHYLIB which exists because the cable test feature calls directly into PHY library functions. The approach taken here is to introduce ethtool_phy_ops function pointers which can be dynamically registered when PHYLIB loads. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net: ethtool: Remove PHYLIB direct dependencyFlorian Fainelli
Now that we have introduced ethtool_phy_ops and the PHY library dynamically registers its operations with that function pointer, we can remove the direct PHYLIB dependency in favor of using dynamic operations. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net: phy: Register ethtool PHY operationsFlorian Fainelli
Utilize ethtool_set_ethtool_phy_ops to register a suitable set of PHY ethtool operations in a dynamic fashion such that ethtool will no longer directy reference PHY library symbols. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net: ethtool: Introduce ethtool_phy_opsFlorian Fainelli
In order to decouple ethtool from its PHY library dependency, define an ethtool_phy_ops singleton which can be overriden by the PHY library when it loads with an appropriate set of function pointers. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07Documentation: networking: fix ethtool-netlink table formatsRandy Dunlap
Fix table formatting to eliminate warnings. Documentation/networking/ethtool-netlink.rst:509: WARNING: Malformed table. Documentation/networking/ethtool-netlink.rst:522: WARNING: Malformed table. Documentation/networking/ethtool-netlink.rst:543: WARNING: Malformed table. Documentation/networking/ethtool-netlink.rst:555: WARNING: Malformed table. Documentation/networking/ethtool-netlink.rst:591: WARNING: Malformed table. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net: phy: add a Kconfig option for mdio_devresBartosz Golaszewski
If phylib is built as a module and CONFIG_MDIO_DEVICE is 'y', the mdio_device and mdio_bus code will be in the phylib module, not in the kernel image. Meanwhile we build mdio_devres depending on the CONFIG_MDIO_DEVICE symbol, so if it's 'y', it will go into the kernel and we'll hit the following linker error: ld: drivers/net/phy/mdio_devres.o: in function `devm_mdiobus_alloc_size': >> drivers/net/phy/mdio_devres.c:38: undefined reference to `mdiobus_alloc_size' ld: drivers/net/phy/mdio_devres.o: in function `devm_mdiobus_free': >> drivers/net/phy/mdio_devres.c:16: undefined reference to `mdiobus_free' ld: drivers/net/phy/mdio_devres.o: in function `__devm_mdiobus_register': >> drivers/net/phy/mdio_devres.c:87: undefined reference to `__mdiobus_register' ld: drivers/net/phy/mdio_devres.o: in function `devm_mdiobus_unregister': >> drivers/net/phy/mdio_devres.c:53: undefined reference to `mdiobus_unregister' ld: drivers/net/phy/mdio_devres.o: in function `devm_of_mdiobus_register': >> drivers/net/phy/mdio_devres.c:120: undefined reference to `of_mdiobus_register' Add a hidden Kconfig option for MDIO_DEVRES which will be currently selected by CONFIG_PHYLIB as there are no non-phylib users of these helpers. Reported-by: kernel test robot <lkp@intel.com> Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()") Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07Merge branch 'smsc-use-generic-power-management'David S. Miller
Vaibhav Gupta says: ==================== smsc: use generic power management Linux Kernel Mentee: Remove Legacy Power Management. The purpose of this patch series is to remove legacy power management callbacks from smsc ethernet drivers. The callbacks performing suspend() and resume() operations are still calling pci_save_state(), pci_set_power_state(), etc. and handling the power management themselves, which is not recommended. The conversion requires the removal of the those function calls and change the callback definition accordingly and make use of dev_pm_ops structure. All patches are compile-tested only. V2: Kbuild in V1, warning: variable 'err' is used uninitialized whenever 'if' conditio is false in funcution .resume() . ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07smsc9420: use generic power managementVaibhav Gupta
Drivers should not use legacy power management as they have to manage power states and related operations, for the device, themselves. This driver was handling them with the help of PCI helper functions. With generic PM, all essentials will be handled by the PCI core. Driver needs to do only device-specific operations. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07epic100: use generic power managementVaibhav Gupta
Drivers should not use legacy power management as they have to manage power states and related operations, for the device, themselves. With generic PM, all essentials will be handled by the PCI core. Driver needs to do only device-specific operations. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07mvpp2: fix pointer checkMatteo Croce
priv->page_pool is an array, so comparing against it will always return true. Do a meaningful check by checking priv->page_pool[0] instead. While at it, clear the page_pool pointers on deallocation, or when an allocation error happens during init. Reported-by: Colin Ian King <colin.king@canonical.com> Fixes: c2d6fe6163de ("mvpp2: XDP TX support") Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07mptcp: use mptcp worker for path managementFlorian Westphal
We can re-use the existing work queue to handle path management instead of a dedicated work queue. Just move pm_worker to protocol.c, call it from the mptcp worker and get rid of the msk lock (already held). Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07sun/cassini: mark cas_resume() as __maybe_unusedWei Yongjun
In certain configurations without power management support, gcc report the following warning: drivers/net/ethernet/sun/cassini.c:5206:12: warning: 'cas_resume' defined but not used [-Wunused-function] 5206 | static int cas_resume(struct device *dev_d) | ^~~~~~~~~~ Mark cas_resume() as __maybe_unused to make it clear. Fixes: f193f4ebde3d ("sun/cassini: use generic power management") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07sun/niu: add __maybe_unused attribute to PM functionsVaibhav Gupta
The upgraded .suspend() and .resume() throw "defined but not used [-Wunused-function]" warning for certain configurations. Mark them with "__maybe_unused" attribute. Compile-tested only. Fixes: b0db0cc2f695 ("sun/niu: use generic power management") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07Merge branch 'phy-warn'David S. Miller
Andrew Lunn says: ==================== drivers/net/phy C=1 W=1 fixes This fixes most of the Sparse and W=1 warnings in drivers/net/phy. The Cavium code is still not fully clean, but it might actually be the strange code is confusing Sparse. v2 -- Added RB, TB, AB. s/case/cause Reverse Christmas tree Module soft dependencies ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net: phy: mdio-octeon: Cleanup module loading dependenciesAndrew Lunn
To ensure that the octeon MDIO driver has been loaded, the Cavium ethernet drivers reference a dummy symbol in the MDIO driver. This forces it to be loaded first. And this symbol has not been cleanly implemented, resulting in warnings when build W=1 C=1. Since device tree is being used, and a phandle points to the PHY on the MDIO bus, we can make use of deferred probing. If the PHY fails to connect, it should be because the MDIO bus driver has not loaded yet. Return -EPROBE_DEFER so it will be tried again later. Additionally, add a MODULE_SOFTDEP() to give user space a hint as to what order it should load the modules. v2: s/octoen/octeon/ Add MODULE_SOFTDEP() Cc: Sunil Goutham <sgoutham@marvell.com> Cc: Robert Richter <rrichter@marvell.com> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net: phy: cavium: Improve __iomem messAndrew Lunn
The MIPS low level register access functions seem to be missing __iomem annotation. This causes lots of sparse warnings, when code casts off the __iomem. Make the Cavium MDIO drivers cleaner by pushing the casts lower down into the helpers, allow the drivers to work as normal, with __iomem. bus->register_base is now an void *, rather than a u64. So forming the mii_bus->id string cannot use %llx any more. Use %px, so this kernel address is still exposed to user space, as it was before. v2: s/cases/causes/g Cc: Sunil Goutham <sgoutham@marvell.com> Cc: Robert Richter <rrichter@marvell.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net: phy: dp83640: Fixup cast to restricted __be16 warningAndrew Lunn
ntohs() expects to be passed a __be16. Correct the type of the variable holding the sequence ID. Cc: Richard Cochran <richardcochran@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net: phy: Make phy_10gbit_fec_features_array staticAndrew Lunn
This array is not used outside of phy_device.c, so make it static. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net: phy: Properly define genphy_c45_driverAndrew Lunn
Avoid the W=1 warning that symbol 'genphy_c45_driver' was not declared. Should it be static? Declare it on the phy header file. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net: phy: Fixup parameters in kerneldocAndrew Lunn
Correct the kerneldoc for a few structure and function calls, as reported by C=1 W=1. Cc: Alexandru Ardelean <alexaundru.ardelean@analog.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net: phy: at803x: Avoid comparison is always false warningAndrew Lunn
By placing the GENMASK value into an unsigned int and then passing it to PREF_FIELD, the type is reduces down from ULL. Given the reduced size of the type, the range checks in PREP_FAIL() are always true, and -Wtype-limits then gives a warning. By skipping the intermediate variable, the warning can be avoided. Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net: sfp: Unique GPIO interrupt namesChris Healy
Dynamically generate a unique GPIO interrupt name, based on the device name and the GPIO name. For example: 103: 0 sx1503q 12 Edge sff2-los 104: 0 sx1503q 13 Edge sff2-tx-fault The sffX indicates the SFP the los and tx-fault are associated with. v3: - reverse Christmas tree new variable - fix spaces vs tabs v2: - added net-next to PATCH part of subject line - switched to devm_kasprintf() Signed-off-by: Chris Healy <cphealy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07ice: add documentation for device-caps regionJacob Keller
The recent change by commit 8d7aab3515fa ("ice: implement snapshot for device capabilities") to implement the device-caps region for the ice driver forgot to document it. Add documentation to the ice devlink documentation file describing the new region and add some sample output to the shell commands provided as an example. Fixes: 8d7aab3515fa ("ice: implement snapshot for device capabilities") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net: systemport: Add support for VLAN transmit accelerationFlorian Fainelli
SYSTEMPORT is capable of performing VLAN transmit acceleration, support that by configuring it appropriately, providing the VLAN ID and PCP/DEI where necessary. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06mptcp: fix race in subflow_data_ready()Davide Caratti
syzkaller was able to make the kernel reach subflow_data_ready() for a server subflow that was closed before subflow_finish_connect() completed. In these cases we can avoid using the path for regular/fallback MPTCP data, and just wake the main socket, to avoid the following warning: WARNING: CPU: 0 PID: 9370 at net/mptcp/subflow.c:885 subflow_data_ready+0x1e6/0x290 net/mptcp/subflow.c:885 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 9370 Comm: syz-executor.0 Not tainted 5.7.0 #106 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xb7/0xfe lib/dump_stack.c:118 panic+0x29e/0x692 kernel/panic.c:221 __warn.cold+0x2f/0x3d kernel/panic.c:582 report_bug+0x28b/0x2f0 lib/bug.c:195 fixup_bug arch/x86/kernel/traps.c:105 [inline] fixup_bug arch/x86/kernel/traps.c:100 [inline] do_error_trap+0x10f/0x180 arch/x86/kernel/traps.c:197 do_invalid_op+0x32/0x40 arch/x86/kernel/traps.c:216 invalid_op+0x1e/0x30 arch/x86/entry/entry_64.S:1027 RIP: 0010:subflow_data_ready+0x1e6/0x290 net/mptcp/subflow.c:885 Code: 04 02 84 c0 74 06 0f 8e 91 00 00 00 41 0f b6 5e 48 31 ff 83 e3 18 89 de e8 37 ec 3d fe 84 db 0f 85 65 ff ff ff e8 fa ea 3d fe <0f> 0b e9 59 ff ff ff e8 ee ea 3d fe 48 89 ee 4c 89 ef e8 f3 77 ff RSP: 0018:ffff88811b2099b0 EFLAGS: 00010206 RAX: ffff888111197000 RBX: 0000000000000000 RCX: ffffffff82fbc609 RDX: 0000000000000100 RSI: ffffffff82fbc616 RDI: 0000000000000001 RBP: ffff8881111bc800 R08: ffff888111197000 R09: ffffed10222a82af R10: ffff888111541577 R11: ffffed10222a82ae R12: 1ffff11023641336 R13: ffff888111541000 R14: ffff88810fd4ca00 R15: ffff888111541570 tcp_child_process+0x754/0x920 net/ipv4/tcp_minisocks.c:841 tcp_v4_do_rcv+0x749/0x8b0 net/ipv4/tcp_ipv4.c:1642 tcp_v4_rcv+0x2666/0x2e60 net/ipv4/tcp_ipv4.c:1999 ip_protocol_deliver_rcu+0x29/0x1f0 net/ipv4/ip_input.c:204 ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline] NF_HOOK include/linux/netfilter.h:421 [inline] ip_local_deliver+0x2da/0x390 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:441 [inline] ip_rcv_finish net/ipv4/ip_input.c:428 [inline] ip_rcv_finish net/ipv4/ip_input.c:414 [inline] NF_HOOK include/linux/netfilter.h:421 [inline] ip_rcv+0xef/0x140 net/ipv4/ip_input.c:539 __netif_receive_skb_one_core+0x197/0x1e0 net/core/dev.c:5268 __netif_receive_skb+0x27/0x1c0 net/core/dev.c:5382 process_backlog+0x1e5/0x6d0 net/core/dev.c:6226 napi_poll net/core/dev.c:6671 [inline] net_rx_action+0x3e3/0xd70 net/core/dev.c:6739 __do_softirq+0x18c/0x634 kernel/softirq.c:292 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1082 </IRQ> do_softirq.part.0+0x26/0x30 kernel/softirq.c:337 do_softirq arch/x86/include/asm/preempt.h:26 [inline] __local_bh_enable_ip+0x46/0x50 kernel/softirq.c:189 local_bh_enable include/linux/bottom_half.h:32 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:723 [inline] ip_finish_output2+0x78a/0x19c0 net/ipv4/ip_output.c:229 __ip_finish_output+0x471/0x720 net/ipv4/ip_output.c:306 dst_output include/net/dst.h:435 [inline] ip_local_out+0x181/0x1e0 net/ipv4/ip_output.c:125 __ip_queue_xmit+0x7a1/0x14e0 net/ipv4/ip_output.c:530 __tcp_transmit_skb+0x19dc/0x35e0 net/ipv4/tcp_output.c:1238 __tcp_send_ack.part.0+0x3c2/0x5b0 net/ipv4/tcp_output.c:3785 __tcp_send_ack net/ipv4/tcp_output.c:3791 [inline] tcp_send_ack+0x7d/0xa0 net/ipv4/tcp_output.c:3791 tcp_rcv_synsent_state_process net/ipv4/tcp_input.c:6040 [inline] tcp_rcv_state_process+0x36a4/0x49c2 net/ipv4/tcp_input.c:6209 tcp_v4_do_rcv+0x343/0x8b0 net/ipv4/tcp_ipv4.c:1651 sk_backlog_rcv include/net/sock.h:996 [inline] __release_sock+0x1ad/0x310 net/core/sock.c:2548 release_sock+0x54/0x1a0 net/core/sock.c:3064 inet_wait_for_connect net/ipv4/af_inet.c:594 [inline] __inet_stream_connect+0x57e/0xd50 net/ipv4/af_inet.c:686 inet_stream_connect+0x53/0xa0 net/ipv4/af_inet.c:725 mptcp_stream_connect+0x171/0x5f0 net/mptcp/protocol.c:1920 __sys_connect_file net/socket.c:1854 [inline] __sys_connect+0x267/0x2f0 net/socket.c:1871 __do_sys_connect net/socket.c:1882 [inline] __se_sys_connect net/socket.c:1879 [inline] __x64_sys_connect+0x6f/0xb0 net/socket.c:1879 do_syscall_64+0xb7/0x3d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fb577d06469 Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ff 49 2b 00 f7 d8 64 89 01 48 RSP: 002b:00007fb5783d5dd8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 000000000068bfa0 RCX: 00007fb577d06469 RDX: 000000000000004d RSI: 0000000020000040 RDI: 0000000000000003 RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000041427c R14: 00007fb5783d65c0 R15: 0000000000000003 Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/39 Reported-by: Christoph Paasch <cpaasch@apple.com> Fixes: e1ff9e82e2ea ("net: mptcp: improve fallback to TCP") Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06Replace HTTP links with HTTPS ones: IPv*Alexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06Merge branch 'qed-warnings-cleanup'David S. Miller
Alexander Lobakin says: ==================== net: qed/qede: W=1 C=1 warnings cleanup This set cleans qed/qede build log under W=1 C=1 with GCC 8 and sparse 0.6.2. The only thing left is "context imbalance -- unexpected unlock" in one of the source files, which will be issued later during the refactoring cycles. The biggest part is handling the endianness warnings. The current code often just assumes that both host and device operate in LE, which is obviously incorrect (despite the fact that it's true for x86 platforms), and makes sparse {s,m}ad. The rest of the series is mostly random non-functional fixes here-and-there. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06net: qede: fix BE vs CPU comparisonAlexander Lobakin
Flow Dissector's keys are mostly Network / Big Endian. U{16,32}_MAX are the same in either of byteorders, but let's make sparse happy with wrapping them into noops. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06net: qede: fix kernel-doc for qede_ptp_adjfreq()Alexander Lobakin
One of the function arguments was renamed some time ago, but this wasn't reflected in its kernel-doc comment. Also add the description for return values. Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-23 01:22:34 +0000