diff options
Diffstat (limited to 'tools/testing')
20 files changed, 511 insertions, 123 deletions
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 32487ed18354..e66e710cc595 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -10,6 +10,7 @@ TARGETS += timers TARGETS += vm TARGETS += powerpc TARGETS += user +TARGETS += sysctl all: for TARGET in $(TARGETS); do \ diff --git a/tools/testing/selftests/powerpc/Makefile b/tools/testing/selftests/powerpc/Makefile index 316194f26ff4..b3dbe9ef1a40 100644 --- a/tools/testing/selftests/powerpc/Makefile +++ b/tools/testing/selftests/powerpc/Makefile @@ -13,7 +13,7 @@ CFLAGS := -Wall -O2 -flto -Wall -Werror -DGIT_VERSION='"$(GIT_VERSION)"' -I$(CUR export CC CFLAGS -TARGETS = pmu copyloops +TARGETS = pmu copyloops mm endif diff --git a/tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h b/tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h index ccd9c84c4e3f..d1dc37425510 100644 --- a/tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h +++ b/tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h @@ -46,12 +46,15 @@ #define R20 r20 #define R21 r21 #define R22 r22 +#define R29 r29 +#define R30 r30 +#define R31 r31 #define STACKFRAMESIZE 256 -#define STK_PARAM(i) (48 + ((i)-3)*8) #define STK_REG(i) (112 + ((i)-14)*8) #define _GLOBAL(A) FUNC_START(test_ ## A) +#define _GLOBAL_TOC(A) _GLOBAL(A) #define PPC_MTOCRF(A, B) mtocrf A, B diff --git a/tools/testing/selftests/powerpc/mm/Makefile b/tools/testing/selftests/powerpc/mm/Makefile new file mode 100644 index 000000000000..357ccbd6bad9 --- /dev/null +++ b/tools/testing/selftests/powerpc/mm/Makefile @@ -0,0 +1,18 @@ +noarg: + $(MAKE) -C ../ + +PROGS := hugetlb_vs_thp_test + +all: $(PROGS) + +$(PROGS): ../harness.c + +run_tests: all + @-for PROG in $(PROGS); do \ + ./$$PROG; \ + done; + +clean: + rm -f $(PROGS) + +.PHONY: all run_tests clean diff --git a/tools/testing/selftests/powerpc/mm/hugetlb_vs_thp_test.c b/tools/testing/selftests/powerpc/mm/hugetlb_vs_thp_test.c new file mode 100644 index 000000000000..3d8e5b033e1d --- /dev/null +++ b/tools/testing/selftests/powerpc/mm/hugetlb_vs_thp_test.c @@ -0,0 +1,72 @@ +#include <stdio.h> +#include <sys/mman.h> +#include <unistd.h> + +#include "utils.h" + +/* This must match the huge page & THP size */ +#define SIZE (16 * 1024 * 1024) + +static int test_body(void) +{ + void *addr; + char *p; + + addr = (void *)0xa0000000; + + p = mmap(addr, SIZE, PROT_READ | PROT_WRITE, + MAP_HUGETLB | MAP_ANONYMOUS | MAP_PRIVATE, -1, 0); + if (p != MAP_FAILED) { + /* + * Typically the mmap will fail because no huge pages are + * allocated on the system. But if there are huge pages + * allocated the mmap will succeed. That's fine too, we just + * munmap here before continuing. + */ + munmap(addr, SIZE); + } + + p = mmap(addr, SIZE, PROT_READ | PROT_WRITE, + MAP_ANONYMOUS | MAP_PRIVATE, -1, 0); + if (p == MAP_FAILED) { + printf("Mapping failed @ %p\n", addr); + perror("mmap"); + return 1; + } + + /* + * Either a user or kernel access is sufficient to trigger the bug. + * A kernel access is easier to spot & debug, as it will trigger the + * softlockup or RCU stall detectors, and when the system is kicked + * into xmon we get a backtrace in the kernel. + * + * A good option is: + * getcwd(p, SIZE); + * + * For the purposes of this testcase it's preferable to spin in + * userspace, so the harness can kill us if we get stuck. That way we + * see a test failure rather than a dead system. + */ + *p = 0xf; + + munmap(addr, SIZE); + + return 0; +} + +static int test_main(void) +{ + int i; + + /* 10,000 because it's a "bunch", and completes reasonably quickly */ + for (i = 0; i < 10000; i++) + if (test_body()) + return 1; + + return 0; +} + +int main(void) +{ + return test_harness(test_main, "hugetlb_vs_thp"); +} diff --git a/tools/testing/selftests/rcutorture/bin/configinit.sh b/tools/testing/selftests/rcutorture/bin/configinit.sh index a1be6e62add1..9c3f3d39b934 100755 --- a/tools/testing/selftests/rcutorture/bin/configinit.sh +++ b/tools/testing/selftests/rcutorture/bin/configinit.sh @@ -62,7 +62,7 @@ grep '^grep' < $T/u.sh > $T/upd.sh echo "cat - $c" >> $T/upd.sh make mrproper make $buildloc distclean > $builddir/Make.distclean 2>&1 -make $buildloc defconfig > $builddir/Make.defconfig.out 2>&1 +make $buildloc $TORTURE_DEFCONFIG > $builddir/Make.defconfig.out 2>&1 mv $builddir/.config $builddir/.config.sav sh $T/upd.sh < $builddir/.config.sav > $builddir/.config cp $builddir/.config $builddir/.config.new diff --git a/tools/testing/selftests/rcutorture/bin/functions.sh b/tools/testing/selftests/rcutorture/bin/functions.sh index 9b17e810ddc3..d01b865bb100 100644 --- a/tools/testing/selftests/rcutorture/bin/functions.sh +++ b/tools/testing/selftests/rcutorture/bin/functions.sh @@ -76,15 +76,39 @@ configfrag_hotplug_cpu () { grep -q '^CONFIG_HOTPLUG_CPU=y$' "$1" } +# identify_boot_image qemu-cmd +# +# Returns the relative path to the kernel build image. This will be +# arch/<arch>/boot/bzImage unless overridden with the TORTURE_BOOT_IMAGE +# environment variable. +identify_boot_image () { + if test -n "$TORTURE_BOOT_IMAGE" + then + echo $TORTURE_BOOT_IMAGE + else + case "$1" in + qemu-system-x86_64|qemu-system-i386) + echo arch/x86/boot/bzImage + ;; + qemu-system-ppc64) + echo arch/powerpc/boot/bzImage + ;; + *) + echo "" + ;; + esac + fi +} + # identify_qemu builddir # # Returns our best guess as to which qemu command is appropriate for -# the kernel at hand. Override with the RCU_QEMU_CMD environment variable. +# the kernel at hand. Override with the TORTURE_QEMU_CMD environment variable. identify_qemu () { local u="`file "$1"`" - if test -n "$RCU_QEMU_CMD" + if test -n "$TORTURE_QEMU_CMD" then - echo $RCU_QEMU_CMD + echo $TORTURE_QEMU_CMD elif echo $u | grep -q x86-64 then echo qemu-system-x86_64 @@ -98,7 +122,7 @@ identify_qemu () { echo Cannot figure out what qemu command to use! 1>&2 echo file $1 output: $u # Usually this will be one of /usr/bin/qemu-system-* - # Use RCU_QEMU_CMD environment variable or appropriate + # Use TORTURE_QEMU_CMD environment variable or appropriate # argument to top-level script. exit 1 fi @@ -107,14 +131,14 @@ identify_qemu () { # identify_qemu_append qemu-cmd # # Output arguments for the qemu "-append" string based on CPU type -# and the RCU_QEMU_INTERACTIVE environment variable. +# and the TORTURE_QEMU_INTERACTIVE environment variable. identify_qemu_append () { case "$1" in qemu-system-x86_64|qemu-system-i386) echo noapic selinux=0 initcall_debug debug ;; esac - if test -n "$RCU_QEMU_INTERACTIVE" + if test -n "$TORTURE_QEMU_INTERACTIVE" then echo root=/dev/sda else @@ -124,8 +148,8 @@ identify_qemu_append () { # identify_qemu_args qemu-cmd serial-file # -# Output arguments for qemu arguments based on the RCU_QEMU_MAC -# and RCU_QEMU_INTERACTIVE environment variables. +# Output arguments for qemu arguments based on the TORTURE_QEMU_MAC +# and TORTURE_QEMU_INTERACTIVE environment variables. identify_qemu_args () { case "$1" in qemu-system-x86_64|qemu-system-i386) @@ -133,17 +157,17 @@ identify_qemu_args () { qemu-system-ppc64) echo -enable-kvm -M pseries -cpu POWER7 -nodefaults echo -device spapr-vscsi - if test -n "$RCU_QEMU_INTERACTIVE" -a -n "$RCU_QEMU_MAC" + if test -n "$TORTURE_QEMU_INTERACTIVE" -a -n "$TORTURE_QEMU_MAC" then - echo -device spapr-vlan,netdev=net0,mac=$RCU_QEMU_MAC + echo -device spapr-vlan,netdev=net0,mac=$TORTURE_QEMU_MAC echo -netdev bridge,br=br0,id=net0 - elif test -n "$RCU_QEMU_INTERACTIVE" + elif test -n "$TORTURE_QEMU_INTERACTIVE" then echo -net nic -net user fi ;; esac - if test -n "$RCU_QEMU_INTERACTIVE" + if test -n "$TORTURE_QEMU_INTERACTIVE" then echo -monitor stdio -serial pty -S else diff --git a/tools/testing/selftests/rcutorture/bin/kvm-build.sh b/tools/testing/selftests/rcutorture/bin/kvm-build.sh index 197901ec10bf..7c1e56b46de4 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-build.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-build.sh @@ -45,9 +45,9 @@ T=/tmp/test-linux.sh.$$ trap 'rm -rf $T' 0 mkdir $T -cat ${config_template} | grep -v CONFIG_RCU_TORTURE_TEST > $T/config +grep -v 'CONFIG_[A-Z]*_TORTURE_TEST' < ${config_template} > $T/config cat << ___EOF___ >> $T/config -CONFIG_INITRAMFS_SOURCE="$RCU_INITRD" +CONFIG_INITRAMFS_SOURCE="$TORTURE_INITRD" CONFIG_VIRTIO_PCI=y CONFIG_VIRTIO_CONSOLE=y ___EOF___ @@ -60,7 +60,7 @@ then exit 2 fi ncpus=`cpus2use.sh` -make O=$builddir -j$ncpus $RCU_KMAKE_ARG > $builddir/Make.out 2>&1 +make O=$builddir -j$ncpus $TORTURE_KMAKE_ARG > $builddir/Make.out 2>&1 retval=$? if test $retval -ne 0 || grep "rcu[^/]*": < $builddir/Make.out | egrep -q "Stop|Error|error:|warning:" || egrep -q "Stop|Error|error:" < $builddir/Make.out then diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh index 829186e19eb1..7f1ff1a8fc4b 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh @@ -35,7 +35,7 @@ configfile=`echo $i | sed -e 's/^.*\///'` ncs=`grep "Writes: Total:" $i/console.log 2> /dev/null | tail -1 | sed -e 's/^.* Total: //' -e 's/ .*$//'` if test -z "$ncs" then - echo $configfile + echo "$configfile -------" else title="$configfile ------- $ncs acquisitions/releases" dur=`sed -e 's/^.* locktorture.shutdown_secs=//' -e 's/ .*$//' < $i/qemu-cmd 2> /dev/null` diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh index d75b1dc5ae53..307c4b95f325 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh @@ -35,7 +35,7 @@ configfile=`echo $i | sed -e 's/^.*\///'` ngps=`grep ver: $i/console.log 2> /dev/null | tail -1 | sed -e 's/^.* ver: //' -e 's/ .*$//'` if test -z "$ngps" then - echo $configfile + echo "$configfile -------" else title="$configfile ------- $ngps grace periods" dur=`sed -e 's/^.* rcutorture.shutdown_secs=//' -e 's/ .*$//' < $i/qemu-cmd 2> /dev/null` diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh index a44daaa259a9..ee1f6cae3d70 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh @@ -25,6 +25,7 @@ # Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> PATH=`pwd`/tools/testing/selftests/rcutorture/bin:$PATH; export PATH +. tools/testing/selftests/rcutorture/bin/functions.sh for rd in "$@" do firsttime=1 @@ -39,13 +40,24 @@ do fi TORTURE_SUITE="`cat $i/../TORTURE_SUITE`" kvm-recheck-${TORTURE_SUITE}.sh $i - configcheck.sh $i/.config $i/ConfigFragment - parse-build.sh $i/Make.out $configfile - parse-rcutorture.sh $i/console.log $configfile - parse-console.sh $i/console.log $configfile - if test -r $i/Warnings + if test -f "$i/console.log" then - cat $i/Warnings + configcheck.sh $i/.config $i/ConfigFragment + parse-build.sh $i/Make.out $configfile + parse-torture.sh $i/console.log $configfile + parse-console.sh $i/console.log $configfile + if test -r $i/Warnings + then + cat $i/Warnings + fi + else + if test -f "$i/qemu-cmd" + then + print_bug qemu failed + else + print_bug Build failed + fi + echo " $i" fi done done diff --git a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh index 94b28bb37d36..27e544e29510 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh @@ -94,9 +94,17 @@ fi # CONFIG_YENTA=n if kvm-build.sh $config_template $builddir $T then + QEMU="`identify_qemu $builddir/vmlinux`" + BOOT_IMAGE="`identify_boot_image $QEMU`" cp $builddir/Make*.out $resdir cp $builddir/.config $resdir - cp $builddir/arch/x86/boot/bzImage $resdir + if test -n "$BOOT_IMAGE" + then + cp $builddir/$BOOT_IMAGE $resdir + else + echo No identifiable boot image, not running KVM, see $resdir. + echo Do the torture scripts know about your architecture? + fi parse-build.sh $resdir/Make.out $title if test -f $builddir.wait then @@ -104,6 +112,7 @@ then fi else cp $builddir/Make*.out $resdir + cp $builddir/.config $resdir || : echo Build failed, not running KVM, see $resdir. if test -f $builddir.wait then @@ -124,9 +133,6 @@ cd $KVM kstarttime=`awk 'BEGIN { print systime() }' < /dev/null` echo ' ---' `date`: Starting kernel -# Determine the appropriate flavor of qemu command. -QEMU="`identify_qemu $builddir/vmlinux`" - # Generate -smp qemu argument. qemu_args="-nographic $qemu_args" cpu_count=`configNR_CPUS.sh $config_template` @@ -151,27 +157,38 @@ boot_args="`configfrag_boot_params "$boot_args" "$config_template"`" # Generate kernel-version-specific boot parameters boot_args="`per_version_boot_params "$boot_args" $builddir/.config $seconds`" -echo $QEMU $qemu_args -m 512 -kernel $builddir/arch/x86/boot/bzImage -append \"$qemu_append $boot_args\" > $resdir/qemu-cmd -if test -n "$RCU_BUILDONLY" +echo $QEMU $qemu_args -m 512 -kernel $builddir/$BOOT_IMAGE -append \"$qemu_append $boot_args\" > $resdir/qemu-cmd +if test -n "$TORTURE_BUILDONLY" then echo Build-only run specified, boot/test omitted. exit 0 fi -$QEMU $qemu_args -m 512 -kernel $builddir/arch/x86/boot/bzImage -append "$qemu_append $boot_args" & +( $QEMU $qemu_args -m 512 -kernel $builddir/$BOOT_IMAGE -append "$qemu_append $boot_args"; echo $? > $resdir/qemu-retval ) & qemu_pid=$! commandcompleted=0 echo Monitoring qemu job at pid $qemu_pid -for ((i=0;i<$seconds;i++)) +while : do + kruntime=`awk 'BEGIN { print systime() - '"$kstarttime"' }' < /dev/null` if kill -0 $qemu_pid > /dev/null 2>&1 then + if test $kruntime -ge $seconds + then + break; + fi sleep 1 else commandcompleted=1 - kruntime=`awk 'BEGIN { print systime() - '"$kstarttime"' }' < /dev/null` if test $kruntime -lt $seconds then echo Completed in $kruntime vs. $seconds >> $resdir/Warnings 2>&1 + grep "^(qemu) qemu:" $resdir/kvm-test-1-run.sh.out >> $resdir/Warnings 2>&1 + killpid="`sed -n "s/^(qemu) qemu: terminating on signal [0-9]* from pid \([0-9]*\).*$/\1/p" $resdir/Warnings`" + if test -n "$killpid" + then + echo "ps -fp $killpid" >> $resdir/Warnings 2>&1 + ps -fp $killpid >> $resdir/Warnings 2>&1 + fi else echo ' ---' `date`: Kernel done fi @@ -181,23 +198,25 @@ done if test $commandcompleted -eq 0 then echo Grace period for qemu job at pid $qemu_pid - for ((i=0;i<=$grace;i++)) + while : do + kruntime=`awk 'BEGIN { print systime() - '"$kstarttime"' }' < /dev/null` if kill -0 $qemu_pid > /dev/null 2>&1 then - sleep 1 + : else break fi - if test $i -eq $grace + if test $kruntime -ge $((seconds + grace)) then - kruntime=`awk 'BEGIN { print systime() - '"$kstarttime"' }'` echo "!!! Hang at $kruntime vs. $seconds seconds" >> $resdir/Warnings 2>&1 kill -KILL $qemu_pid + break fi + sleep 1 done fi cp $builddir/console.log $resdir -parse-${TORTURE_SUITE}torture.sh $resdir/console.log $title +parse-torture.sh $resdir/console.log $title parse-console.sh $resdir/console.log $title diff --git a/tools/testing/selftests/rcutorture/bin/kvm.sh b/tools/testing/selftests/rcutorture/bin/kvm.sh index 5a78cbf55f06..40285c58653e 100644 --- a/tools/testing/selftests/rcutorture/bin/kvm.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm.sh @@ -38,9 +38,10 @@ dur=30 dryrun="" KVM="`pwd`/tools/testing/selftests/rcutorture"; export KVM PATH=${KVM}/bin:$PATH; export PATH -builddir="${KVM}/b1" -RCU_INITRD="$KVM/initrd"; export RCU_INITRD -RCU_KMAKE_ARG=""; export RCU_KMAKE_ARG +TORTURE_DEFCONFIG=defconfig +TORTURE_BOOT_IMAGE="" +TORTURE_INITRD="$KVM/initrd"; export TORTURE_INITRD +TORTURE_KMAKE_ARG="" TORTURE_SUITE=rcu resdir="" configs="" @@ -53,11 +54,12 @@ kversion="" usage () { echo "Usage: $scriptname optional arguments:" echo " --bootargs kernel-boot-arguments" - echo " --builddir absolute-pathname" + echo " --bootimage relative-path-to-kernel-boot-image" echo " --buildonly" echo " --configs \"config-file list\"" echo " --cpus N" echo " --datestamp string" + echo " --defconfig string" echo " --dryrun sched|script" echo " --duration minutes" echo " --interactive" @@ -67,7 +69,6 @@ usage () { echo " --no-initrd" echo " --qemu-args qemu-system-..." echo " --qemu-cmd qemu-system-..." - echo " --relbuilddir relative-pathname" echo " --results absolute-pathname" echo " --torture rcu" exit 1 @@ -78,17 +79,16 @@ do case "$1" in --bootargs) checkarg --bootargs "(list of kernel boot arguments)" "$#" "$2" '.*' '^--' - RCU_BOOTARGS="$2" + TORTURE_BOOTARGS="$2" shift ;; - --builddir) - checkarg --builddir "(absolute pathname)" "$#" "$2" '^/' '^error' - builddir=$2 - gotbuilddir=1 + --bootimage) + checkarg --bootimage "(relative path to kernel boot image)" "$#" "$2" '[a-zA-Z0-9][a-zA-Z0-9_]*' '^--' + TORTURE_BOOT_IMAGE="$2" shift ;; --buildonly) - RCU_BUILDONLY=1; export RCU_BUILDONLY + TORTURE_BUILDONLY=1 ;; --configs) checkarg --configs "(list of config files)" "$#" "$2" '^[^/]*$' '^--' @@ -105,6 +105,11 @@ do ds=$2 shift ;; + --defconfig) + checkarg --defconfig "defconfigtype" "$#" "$2" '^[^/][^/]*$' '^--' + TORTURE_DEFCONFIG=$2 + shift + ;; --dryrun) checkarg --dryrun "sched|script" $# "$2" 'sched\|script' '^--' dryrun=$2 @@ -116,11 +121,11 @@ do shift ;; --interactive) - RCU_QEMU_INTERACTIVE=1; export RCU_QEMU_INTERACTIVE + TORTURE_QEMU_INTERACTIVE=1; export TORTURE_QEMU_INTERACTIVE ;; --kmake-arg) checkarg --kmake-arg "(kernel make arguments)" $# "$2" '.*' '^error$' - RCU_KMAKE_ARG="$2"; export RCU_KMAKE_ARG + TORTURE_KMAKE_ARG="$2" shift ;; --kversion) @@ -130,27 +135,20 @@ do ;; --mac) checkarg --mac "(MAC address)" $# "$2" '^\([0-9a-fA-F]\{2\}:\)\{5\}[0-9a-fA-F]\{2\}$' error - RCU_QEMU_MAC=$2; export RCU_QEMU_MAC + TORTURE_QEMU_MAC=$2 shift ;; --no-initrd) - RCU_INITRD=""; export RCU_INITRD + TORTURE_INITRD=""; export TORTURE_INITRD ;; --qemu-args) checkarg --qemu-args "-qemu args" $# "$2" '^-' '^error' - RCU_QEMU_ARG="$2" + TORTURE_QEMU_ARG="$2" shift ;; --qemu-cmd) checkarg --qemu-cmd "(qemu-system-...)" $# "$2" 'qemu-system-' '^--' - RCU_QEMU_CMD="$2"; export RCU_QEMU_CMD - shift - ;; - --relbuilddir) - checkarg --relbuilddir "(relative pathname)" "$#" "$2" '^[^/]*$' '^--' - relbuilddir=$2 - gotrelbuilddir=1 - builddir=${KVM}/${relbuilddir} + TORTURE_QEMU_CMD="$2" shift ;; --results) @@ -184,30 +182,6 @@ then resdir=$KVM/res fi -if test "$dryrun" = "" -then - if ! test -e $resdir - then - mkdir -p "$resdir" || : - fi - mkdir $resdir/$ds - - # Be noisy only if running the script. - echo Results directory: $resdir/$ds - echo $scriptname $args - - touch $resdir/$ds/log - echo $scriptname $args >> $resdir/$ds/log - echo ${TORTURE_SUITE} > $resdir/$ds/TORTURE_SUITE - - pwd > $resdir/$ds/testid.txt - if test -d .git - then - git status >> $resdir/$ds/testid.txt - git rev-parse HEAD >> $resdir/$ds/testid.txt - fi -fi - # Create a file of test-name/#cpus pairs, sorted by decreasing #cpus. touch $T/cfgcpu for CF in $configs @@ -274,7 +248,39 @@ END { # Generate a script to execute the tests in appropriate batches. cat << ___EOF___ > $T/script +CONFIGFRAG="$CONFIGFRAG"; export CONFIGFRAG +KVM="$KVM"; export KVM +KVPATH="$KVPATH"; export KVPATH +PATH="$PATH"; export PATH +TORTURE_BOOT_IMAGE="$TORTURE_BOOT_IMAGE"; export TORTURE_BOOT_IMAGE +TORTURE_BUILDONLY="$TORTURE_BUILDONLY"; export TORTURE_BUILDONLY +TORTURE_DEFCONFIG="$TORTURE_DEFCONFIG"; export TORTURE_DEFCONFIG +TORTURE_INITRD="$TORTURE_INITRD"; export TORTURE_INITRD +TORTURE_KMAKE_ARG="$TORTURE_KMAKE_ARG"; export TORTURE_KMAKE_ARG +TORTURE_QEMU_CMD="$TORTURE_QEMU_CMD"; export TORTURE_QEMU_CMD +TORTURE_QEMU_INTERACTIVE="$TORTURE_QEMU_INTERACTIVE"; export TORTURE_QEMU_INTERACTIVE +TORTURE_QEMU_MAC="$TORTURE_QEMU_MAC"; export TORTURE_QEMU_MAC TORTURE_SUITE="$TORTURE_SUITE"; export TORTURE_SUITE +if ! test -e $resdir +then + mkdir -p "$resdir" || : +fi +mkdir $resdir/$ds +echo Results directory: $resdir/$ds +echo $scriptname $args +touch $resdir/$ds/log +echo $scriptname $args >> $resdir/$ds/log +echo ${TORTURE_SUITE} > $resdir/$ds/TORTURE_SUITE +pwd > $resdir/$ds/testid.txt +if test -d .git +then + git status >> $resdir/$ds/testid.txt + git rev-parse HEAD >> $resdir/$ds/testid.txt + if ! git diff HEAD > $T/git-diff 2>&1 + then + cp $T/git-diff $resdir/$ds + fi +fi ___EOF___ awk < $T/cfgcpu.pack \ -v CONFIGDIR="$CONFIGFRAG/$kversion/" \ @@ -282,8 +288,8 @@ awk < $T/cfgcpu.pack \ -v ncpus=$cpus \ -v rd=$resdir/$ds/ \ -v dur=$dur \ - -v RCU_QEMU_ARG=$RCU_QEMU_ARG \ - -v RCU_BOOTARGS=$RCU_BOOTARGS \ + -v TORTURE_QEMU_ARG="$TORTURE_QEMU_ARG" \ + -v TORTURE_BOOTARGS="$TORTURE_BOOTARGS" \ 'BEGIN { i = 0; } @@ -320,7 +326,7 @@ function dump(first, pastlast) print "touch " builddir ".wait"; print "mkdir " builddir " > /dev/null 2>&1 || :"; print "mkdir " rd cfr[jn] " || :"; - print "kvm-test-1-run.sh " CONFIGDIR cf[j], builddir, rd cfr[jn], dur " \"" RCU_QEMU_ARG "\" \"" RCU_BOOTARGS "\" > " rd cfr[jn] "/kvm-test-1-run.sh.out 2>&1 &" + print "kvm-test-1-run.sh " CONFIGDIR cf[j], builddir, rd cfr[jn], dur " \"" TORTURE_QEMU_ARG "\" \"" TORTURE_BOOTARGS "\" > " rd cfr[jn] "/kvm-test-1-run.sh.out 2>&1 &" print "echo ", cfr[jn], cpusr[jn] ovf ": Waiting for build to complete. `date`"; print "echo ", cfr[jn], cpusr[jn] ovf ": Waiting for build to complete. `date` >> " rd "/log"; print "while test -f " builddir ".wait" @@ -374,28 +380,26 @@ END { dump(first, i); }' >> $T/script +cat << ___EOF___ >> $T/script +echo +echo +echo " --- `date` Test summary:" +echo Results directory: $resdir/$ds +if test -z "$TORTURE_BUILDONLY" +then + kvm-recheck.sh $resdir/$ds +fi +___EOF___ + if test "$dryrun" = script then - # Dump out the script, but define the environment variables that - # it needs to run standalone. - echo CONFIGFRAG="$CONFIGFRAG; export CONFIGFRAG" - echo KVM="$KVM; export KVM" - echo KVPATH="$KVPATH; export KVPATH" - echo PATH="$PATH; export PATH" - echo RCU_BUILDONLY="$RCU_BUILDONLY; export RCU_BUILDONLY" - echo RCU_INITRD="$RCU_INITRD; export RCU_INITRD" - echo RCU_KMAKE_ARG="$RCU_KMAKE_ARG; export RCU_KMAKE_ARG" - echo RCU_QEMU_CMD="$RCU_QEMU_CMD; export RCU_QEMU_CMD" - echo RCU_QEMU_INTERACTIVE="$RCU_QEMU_INTERACTIVE; export RCU_QEMU_INTERACTIVE" - echo RCU_QEMU_MAC="$RCU_QEMU_MAC; export RCU_QEMU_MAC" - echo "mkdir -p "$resdir" || :" - echo "mkdir $resdir/$ds" cat $T/script exit 0 elif test "$dryrun" = sched then # Extract the test run schedule from the script. - egrep 'start batch|Starting build\.' $T/script | + egrep 'Start batch|Starting build\.' $T/script | + grep -v ">>" | sed -e 's/:.*$//' -e 's/^echo //' exit 0 else @@ -404,9 +408,3 @@ else fi # Tracing: trace_event=rcu:rcu_grace_period,rcu:rcu_future_grace_period,rcu:rcu_grace_period_init,rcu:rcu_nocb_wake,rcu:rcu_preempt_task,rcu:rcu_unlock_preempted_task,rcu:rcu_quiescent_state_report,rcu:rcu_fqs,rcu:rcu_callback,rcu:rcu_kfree_callback,rcu:rcu_batch_start,rcu:rcu_invoke_callback,rcu:rcu_invoke_kfree_callback,rcu:rcu_batch_end,rcu:rcu_torture_read,rcu:rcu_barrier - -echo -echo -echo " --- `date` Test summary:" -echo Results directory: $resdir/$ds -kvm-recheck.sh $resdir/$ds diff --git a/tools/testing/selftests/rcutorture/bin/parse-rcutorture.sh b/tools/testing/selftests/rcutorture/bin/parse-torture.sh index dd0a275d9796..3455560ab4e4 100755 --- a/tools/testing/selftests/rcutorture/bin/parse-rcutorture.sh +++ b/tools/testing/selftests/rcutorture/bin/parse-torture.sh @@ -1,14 +1,14 @@ #!/bin/sh # -# Check the console output from an rcutorture run for goodness. +# Check the console output from a torture run for goodness. # The "file" is a pathname on the local system, and "title" is # a text string for error-message purposes. # -# The file must contain rcutorture output, but can be interspersed -# with other dmesg text. +# The file must contain torture output, but can be interspersed +# with other dmesg text, as in console-log output. # # Usage: -# sh parse-rcutorture.sh file title +# sh parse-torture.sh file title # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -28,7 +28,7 @@ # # Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com> -T=/tmp/parse-rcutorture.sh.$$ +T=/tmp/parse-torture.sh.$$ file="$1" title="$2" @@ -36,13 +36,13 @@ trap 'rm -f $T.seq' 0 . functions.sh -# check for presence of rcutorture.txt file +# check for presence of torture output file. if test -f "$file" -a -r "$file" then : else - echo $title unreadable rcutorture.txt file: $file + echo $title unreadable torture output file: $file exit 1 fi @@ -76,9 +76,9 @@ BEGIN { END { if (badseq) { if (badseqno1 == badseqno2 && badseqno2 == ver) - print "RCU GP HANG at " ver " rcutorture stat " badseqnr; + print "GP HANG at " ver " torture stat " badseqnr; else - print "BAD SEQ " badseqno1 ":" badseqno2 " last:" ver " RCU version " badseqnr; + print "BAD SEQ " badseqno1 ":" badseqno2 " last:" ver " version " badseqnr; } }' > $T.seq @@ -91,13 +91,13 @@ then exit 2 fi else - if grep -q RCU_HOTPLUG $file + if grep -q "_HOTPLUG:" $file then print_warning HOTPLUG FAILURES $title `cat $T.seq` echo " " $file exit 3 fi - echo $title no success message, `grep --binary-files=text 'ver:' $file | wc -l` successful RCU version messages + echo $title no success message, `grep --binary-files=text 'ver:' $file | wc -l` successful version messages if test -s $T.seq then print_warning $title `cat $T.seq` diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE02-T b/tools/testing/selftests/rcutorture/configs/rcu/TREE02-T new file mode 100644 index 000000000000..61c8d9ce5bb2 --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE02-T @@ -0,0 +1,25 @@ +CONFIG_SMP=y +CONFIG_NR_CPUS=8 +CONFIG_PREEMPT_NONE=n +CONFIG_PREEMPT_VOLUNTARY=n +CONFIG_PREEMPT=y +#CHECK#CONFIG_TREE_PREEMPT_RCU=y +CONFIG_HZ_PERIODIC=n +CONFIG_NO_HZ_IDLE=y +CONFIG_NO_HZ_FULL=n +CONFIG_RCU_FAST_NO_HZ=n +CONFIG_RCU_TRACE=y +CONFIG_HOTPLUG_CPU=n +CONFIG_SUSPEND=n +CONFIG_HIBERNATION=n +CONFIG_RCU_FANOUT=3 +CONFIG_RCU_FANOUT_LEAF=3 +CONFIG_RCU_FANOUT_EXACT=n +CONFIG_RCU_NOCB_CPU=n +CONFIG_DEBUG_LOCK_ALLOC=y +CONFIG_PROVE_LOCKING=n +CONFIG_PROVE_RCU_DELAY=n +CONFIG_RCU_CPU_STALL_INFO=n +CONFIG_RCU_CPU_STALL_VERBOSE=y +CONFIG_RCU_BOOST=n +CONFIG_DEBUG_OBJECTS_RCU_HEAD=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE08.boot b/tools/testing/selftests/rcutorture/configs/rcu/TREE08.boot new file mode 100644 index 000000000000..3b42b8b033cd --- /dev/null +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE08.boot @@ -0,0 +1 @@ +rcutorture.torture_type=sched diff --git a/tools/testing/selftests/sysctl/Makefile b/tools/testing/selftests/sysctl/Makefile new file mode 100644 index 000000000000..0a92adaf0865 --- /dev/null +++ b/tools/testing/selftests/sysctl/Makefile @@ -0,0 +1,19 @@ +# Makefile for sysctl selftests. +# Expects kernel.sysctl_writes_strict=1. + +# No binaries, but make sure arg-less "make" doesn't trigger "run_tests". +all: + +# Allow specific tests to be selected. +test_num: + @/bin/sh ./run_numerictests + |