summaryrefslogtreecommitdiffstats
path: root/net/mac80211/cfg.c
diff options
context:
space:
mode:
Diffstat (limited to 'net/mac80211/cfg.c')
-rw-r--r--net/mac80211/cfg.c167
1 files changed, 156 insertions, 11 deletions
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index d06c65fa5526..2577c45069e5 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -411,7 +411,8 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
BIT(NL80211_STA_FLAG_SHORT_PREAMBLE) |
BIT(NL80211_STA_FLAG_WME) |
BIT(NL80211_STA_FLAG_MFP) |
- BIT(NL80211_STA_FLAG_AUTHENTICATED);
+ BIT(NL80211_STA_FLAG_AUTHENTICATED) |
+ BIT(NL80211_STA_FLAG_TDLS_PEER);
if (test_sta_flag(sta, WLAN_STA_AUTHORIZED))
sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_AUTHORIZED);
if (test_sta_flag(sta, WLAN_STA_SHORT_PREAMBLE))
@@ -422,6 +423,8 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_MFP);
if (test_sta_flag(sta, WLAN_STA_AUTH))
sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_AUTHENTICATED);
+ if (test_sta_flag(sta, WLAN_STA_TDLS_PEER))
+ sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_TDLS_PEER);
}
@@ -488,6 +491,31 @@ static void ieee80211_config_ap_ssid(struct ieee80211_sub_if_data *sdata,
(params->hidden_ssid != NL80211_HIDDEN_SSID_NOT_IN_USE);
}
+static int ieee80211_set_probe_resp(struct ieee80211_sub_if_data *sdata,
+ u8 *resp, size_t resp_len)
+{
+ struct sk_buff *new, *old;
+
+ if (!resp || !resp_len)
+ return -EINVAL;
+
+ old = sdata->u.ap.probe_resp;
+
+ new = dev_alloc_skb(resp_len);
+ if (!new)
+ return -ENOMEM;
+
+ memcpy(skb_put(new, resp_len), resp, resp_len);
+
+ rcu_assign_pointer(sdata->u.ap.probe_resp, new);
+ synchronize_rcu();
+
+ if (old)
+ dev_kfree_skb(old);
+
+ return 0;
+}
+
/*
* This handles both adding a beacon and setting new beacon info
*/
@@ -498,6 +526,7 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata,
int new_head_len, new_tail_len;
int size;
int err = -EINVAL;
+ u32 changed = 0;
old = rtnl_dereference(sdata->u.ap.beacon);
@@ -581,11 +610,17 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata,
kfree(old);
+ err = ieee80211_set_probe_resp(sdata, params->probe_resp,
+ params->probe_resp_len);
+ if (!err)
+ changed |= BSS_CHANGED_AP_PROBE_RESP;
+
ieee80211_config_ap_ssid(sdata, params);
+ changed |= BSS_CHANGED_BEACON_ENABLED |
+ BSS_CHANGED_BEACON |
+ BSS_CHANGED_SSID;
- ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED |
- BSS_CHANGED_BEACON |
- BSS_CHANGED_SSID);
+ ieee80211_bss_info_change_notify(sdata, changed);
return 0;
}
@@ -594,6 +629,8 @@ static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev,
{
struct ieee80211_sub_if_data *sdata;
struct beacon_data *old;
+ struct ieee80211_sub_if_data *vlan;
+ int ret;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
@@ -601,7 +638,24 @@ static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev,
if (old)
return -EALREADY;
- return ieee80211_config_beacon(sdata, params);
+ ret = ieee80211_config_beacon(sdata, params);
+ if (ret)
+ return ret;
+
+ /*
+ * Apply control port protocol, this allows us to
+ * not encrypt dynamic WEP control frames.
+ */
+ sdata->control_port_protocol = params->crypto.control_port_ethertype;
+ sdata->control_port_no_encrypt = params->crypto.control_port_no_encrypt;
+ list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) {
+ vlan->control_port_protocol =
+ params->crypto.control_port_ethertype;
+ vlan->control_port_no_encrypt =
+ params->crypto.control_port_no_encrypt;
+ }
+
+ return 0;
}
static int ieee80211_set_beacon(struct wiphy *wiphy, struct net_device *dev,
@@ -778,7 +832,7 @@ static void sta_apply_parameters(struct ieee80211_local *local,
}
if (params->ht_capa)
- ieee80211_ht_cap_ie_to_sta_ht_cap(sband,
+ ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
params->ht_capa,
&sta->sta.ht_cap);
@@ -847,7 +901,12 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
sta_apply_parameters(local, sta, params);
- rate_control_rate_init(sta);
+ /*
+ * for TDLS, rate control should be initialized only when supported
+ * rates are known.
+ */
+ if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER))
+ rate_control_rate_init(sta);
layer2_update = sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
sdata->vif.type == NL80211_IFTYPE_AP;
@@ -931,6 +990,9 @@ static int ieee80211_change_station(struct wiphy *wiphy,
sta_apply_parameters(local, sta, params);
+ if (test_sta_flag(sta, WLAN_STA_TDLS_PEER) && params->supported_rates)
+ rate_control_rate_init(sta);
+
rcu_read_unlock();
if (sdata->vif.type == NL80211_IFTYPE_STATION &&
@@ -1394,7 +1456,7 @@ static int ieee80211_set_channel(struct wiphy *wiphy,
(old_oper_type != local->_oper_channel_type))
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
- if ((sdata && sdata->vif.type != NL80211_IFTYPE_MONITOR) &&
+ if (sdata && sdata->vif.type != NL80211_IFTYPE_MONITOR &&
old_vif_oper_type != sdata->vif.bss_conf.channel_type)
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_HT);
@@ -1917,7 +1979,7 @@ static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct net_device *dev,
enum nl80211_channel_type channel_type,
bool channel_type_valid, unsigned int wait,
const u8 *buf, size_t len, bool no_cck,
- u64 *cookie)
+ bool dont_wait_for_ack, u64 *cookie)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
@@ -1925,10 +1987,15 @@ static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct net_device *dev,
struct sta_info *sta;
struct ieee80211_work *wk;
const struct ieee80211_mgmt *mgmt = (void *)buf;
- u32 flags = IEEE80211_TX_INTFL_NL80211_FRAME_TX |
- IEEE80211_TX_CTL_REQ_TX_STATUS;
+ u32 flags;
bool is_offchan = false;
+ if (dont_wait_for_ack)
+ flags = IEEE80211_TX_CTL_NO_ACK;
+ else
+ flags = IEEE80211_TX_INTFL_NL80211_FRAME_TX |
+ IEEE80211_TX_CTL_REQ_TX_STATUS;
+
/* Check that we are on the requested channel for transmission */
if (chan != local->tmp_channel &&
chan != local->oper_channel)
@@ -2488,6 +2555,82 @@ static int ieee80211_tdls_oper(struct wiphy *wiphy, struct net_device *dev,
return 0;
}
+static int ieee80211_probe_client(struct wiphy *wiphy, struct net_device *dev,
+ const u8 *peer, u64 *cookie)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_qos_hdr *nullfunc;
+ struct sk_buff *skb;
+ int size = sizeof(*nullfunc);
+ __le16 fc;
+ bool qos;
+ struct ieee80211_tx_info *info;
+ struct sta_info *sta;
+
+ rcu_read_lock();
+ sta = sta_info_get(sdata, peer);
+ if (sta) {
+ qos = test_sta_flag(sta, WLAN_STA_WME);
+ rcu_read_unlock();
+ } else {
+ rcu_read_unlock();
+ return -ENOLINK;
+ }
+
+ if (qos) {
+ fc = cpu_to_le16(IEEE80211_FTYPE_DATA |
+ IEEE80211_STYPE_QOS_NULLFUNC |
+ IEEE80211_FCTL_FROMDS);
+ } else {
+ size -= 2;
+ fc = cpu_to_le16(IEEE80211_FTYPE_DATA |
+ IEEE80211_STYPE_NULLFUNC |
+ IEEE80211_FCTL_FROMDS);
+ }
+
+ skb = dev_alloc_skb(local->hw.extra_tx_headroom + size);
+ if (!skb)
+ return -ENOMEM;
+
+ skb->dev = dev;
+
+ skb_reserve(skb, local->hw.extra_tx_headroom);
+
+ nullfunc = (void *) skb_put(skb, size);
+ nullfunc->frame_control = fc;
+ nullfunc->duration_id = 0;
+ memcpy(nullfunc->addr1, sta->sta.addr, ETH_ALEN);
+ memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN);
+ memcpy(nullfunc->addr3, sdata->vif.addr, ETH_ALEN);
+ nullfunc->seq_ctrl = 0;
+
+ info = IEEE80211_SKB_CB(skb);
+
+ info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS |
+ IEEE80211_TX_INTFL_NL80211_FRAME_TX;
+
+ skb_set_queue_mapping(skb, IEEE80211_AC_VO);
+ skb->priority = 7;
+ if (qos)
+ nullfunc->qos_ctrl = cpu_to_le16(7);
+
+ local_bh_disable();
+ ieee80211_xmit(sdata, skb);
+ local_bh_enable();
+
+ *cookie = (unsigned long) skb;
+ return 0;
+}
+
+static struct ieee80211_channel *
+ieee80211_wiphy_get_channel(struct wiphy *wiphy)
+{
+ struct ieee80211_local *local = wiphy_priv(wiphy);
+
+ return local->oper_channel;
+}
+
struct cfg80211_ops mac80211_config_ops = {
.add_virtual_intf = ieee80211_add_iface,
.del_virtual_intf = ieee80211_del_iface,
@@ -2553,4 +2696,6 @@ struct cfg80211_ops mac80211_config_ops = {
.set_rekey_data = ieee80211_set_rekey_data,
.tdls_oper = ieee80211_tdls_oper,
.tdls_mgmt = ieee80211_tdls_mgmt,
+ .probe_client = ieee80211_probe_client,
+ .get_channel = ieee80211_wiphy_get_channel,
};