diff options
Diffstat (limited to 'include')
81 files changed, 2224 insertions, 1470 deletions
diff --git a/include/asm-generic/dma-mapping.h b/include/asm-generic/dma-mapping.h index 880a292d792f..c13f46109e88 100644 --- a/include/asm-generic/dma-mapping.h +++ b/include/asm-generic/dma-mapping.h @@ -4,7 +4,7 @@ static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus) { - return &dma_direct_ops; + return NULL; } #endif /* _ASM_GENERIC_DMA_MAPPING_H */ diff --git a/include/linux/alcor_pci.h b/include/linux/alcor_pci.h new file mode 100644 index 000000000000..da973e8a2da8 --- /dev/null +++ b/include/linux/alcor_pci.h @@ -0,0 +1,286 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2018 Oleksij Rempel <linux@rempel-privat.de> + * + * Driver for Alcor Micro AU6601 and AU6621 controllers + */ + +#ifndef __ALCOR_PCI_H +#define __ALCOR_PCI_H + +#define ALCOR_SD_CARD 0 +#define ALCOR_MS_CARD 1 + +#define DRV_NAME_ALCOR_PCI_SDMMC "alcor_sdmmc" +#define DRV_NAME_ALCOR_PCI_MS "alcor_ms" + +#define PCI_ID_ALCOR_MICRO 0x1AEA +#define PCI_ID_AU6601 0x6601 +#define PCI_ID_AU6621 0x6621 + +#define MHZ_TO_HZ(freq) ((freq) * 1000 * 1000) + +#define AU6601_BASE_CLOCK 31000000 +#define AU6601_MIN_CLOCK 150000 +#define AU6601_MAX_CLOCK 208000000 +#define AU6601_MAX_DMA_SEGMENTS 1 +#define AU6601_MAX_PIO_SEGMENTS 1 +#define AU6601_MAX_DMA_BLOCK_SIZE 0x1000 +#define AU6601_MAX_PIO_BLOCK_SIZE 0x200 +#define AU6601_MAX_DMA_BLOCKS 1 +#define AU6601_DMA_LOCAL_SEGMENTS 1 + +/* registers spotter by reverse engineering but still + * with unknown functionality: + * 0x10 - ADMA phy address. AU6621 only? + * 0x51 - LED ctrl? + * 0x52 - unknown + * 0x61 - LED related? Always toggled BIT0 + * 0x63 - Same as 0x61? + * 0x77 - unknown + */ + +/* SDMA phy address. Higher then 0x0800.0000? + * The au6601 and au6621 have different DMA engines with different issues. One + * For example au6621 engine is triggered by addr change. No other interaction + * is needed. This means, if we get two buffers with same address, then engine + * will stall. + */ +#define AU6601_REG_SDMA_ADDR 0x00 +#define AU6601_SDMA_MASK 0xffffffff + +#define AU6601_DMA_BOUNDARY 0x05 +#define AU6621_DMA_PAGE_CNT 0x05 +/* PIO */ +#define AU6601_REG_BUFFER 0x08 +/* ADMA ctrl? AU6621 only. */ +#define AU6621_DMA_CTRL 0x0c +#define AU6621_DMA_ENABLE BIT(0) +/* CMD index */ +#define AU6601_REG_CMD_OPCODE 0x23 +/* CMD parametr */ +#define AU6601_REG_CMD_ARG 0x24 +/* CMD response 4x4 Bytes */ +#define AU6601_REG_CMD_RSP0 0x30 +#define AU6601_REG_CMD_RSP1 0x34 +#define AU6601_REG_CMD_RSP2 0x38 +#define AU6601_REG_CMD_RSP3 0x3C +/* default timeout set to 125: 125 * 40ms = 5 sec + * how exactly it is calculated? + */ +#define AU6601_TIME_OUT_CTRL 0x69 +/* Block size for SDMA or PIO */ +#define AU6601_REG_BLOCK_SIZE 0x6c +/* Some power related reg, used together with AU6601_OUTPUT_ENABLE */ +#define AU6601_POWER_CONTROL 0x70 + +/* PLL ctrl */ +#define AU6601_CLK_SELECT 0x72 +#define AU6601_CLK_OVER_CLK 0x80 +#define AU6601_CLK_384_MHZ 0x30 +#define AU6601_CLK_125_MHZ 0x20 +#define AU6601_CLK_48_MHZ 0x10 +#define AU6601_CLK_EXT_PLL 0x04 +#define AU6601_CLK_X2_MODE 0x02 +#define AU6601_CLK_ENABLE 0x01 +#define AU6601_CLK_31_25_MHZ 0x00 + +#define AU6601_CLK_DIVIDER 0x73 + +#define AU6601_INTERFACE_MODE_CTRL 0x74 +#define AU6601_DLINK_MODE 0x80 +#define AU6601_INTERRUPT_DELAY_TIME 0x40 +#define AU6601_SIGNAL_REQ_CTRL 0x30 +#define AU6601_MS_CARD_WP BIT(3) +#define AU6601_SD_CARD_WP BIT(0) + +/* same register values are used for: + * - AU6601_OUTPUT_ENABLE + * - AU6601_POWER_CONTROL + */ +#define AU6601_ACTIVE_CTRL 0x75 +#define AU6601_XD_CARD BIT(4) +/* AU6601_MS_CARD_ACTIVE - will cativate MS card section? */ +#define AU6601_MS_CARD BIT(3) +#define AU6601_SD_CARD BIT(0) + +/* card slot state. It should automatically detect type of + * the card + */ +#define AU6601_DETECT_STATUS 0x76 +#define AU6601_DETECT_EN BIT(7) +#define AU6601_MS_DETECTED BIT(3) +#define AU6601_SD_DETECTED BIT(0) +#define AU6601_DETECT_STATUS_M 0xf + +#define AU6601_REG_SW_RESET 0x79 +#define AU6601_BUF_CTRL_RESET BIT(7) +#define AU6601_RESET_DATA BIT(3) +#define AU6601_RESET_CMD BIT(0) + +#define AU6601_OUTPUT_ENABLE 0x7a + +#define AU6601_PAD_DRIVE0 0x7b +#define AU6601_PAD_DRIVE1 0x7c +#define AU6601_PAD_DRIVE2 0x7d +/* read EEPROM? */ +#define AU6601_FUNCTION 0x7f + +#define AU6601_CMD_XFER_CTRL 0x81 +#define AU6601_CMD_17_BYTE_CRC 0xc0 +#define AU6601_CMD_6_BYTE_WO_CRC 0x80 +#define AU6601_CMD_6_BYTE_CRC 0x40 +#define AU6601_CMD_START_XFER 0x20 +#define AU6601_CMD_STOP_WAIT_RDY 0x10 +#define AU6601_CMD_NO_RESP 0x00 + +#define AU6601_REG_BUS_CTRL 0x82 +#define AU6601_BUS_WIDTH_4BIT 0x20 +#define AU6601_BUS_WIDTH_8BIT 0x10 +#define AU6601_BUS_WIDTH_1BIT 0x00 + +#define AU6601_DATA_XFER_CTRL 0x83 +#define AU6601_DATA_WRITE BIT(7) +#define AU6601_DATA_DMA_MODE BIT(6) +#define AU6601_DATA_START_XFER BIT(0) + +#define AU6601_DATA_PIN_STATE 0x84 +#define AU6601_BUS_STAT_CMD BIT(15) +/* BIT(4) - BIT(7) are permanently 1. + * May be reserved or not attached DAT4-DAT7 + */ +#define AU6601_BUS_STAT_DAT3 BIT(3) +#define AU6601_BUS_STAT_DAT2 BIT(2) +#define AU6601_BUS_STAT_DAT1 BIT(1) +#define AU6601_BUS_STAT_DAT0 BIT(0) +#define AU6601_BUS_STAT_DAT_MASK 0xf + +#define AU6601_OPT 0x85 +#define AU6601_OPT_CMD_LINE_LEVEL 0x80 +#define AU6601_OPT_NCRC_16_CLK BIT(4) +#define AU6601_OPT_CMD_NWT BIT(3) +#define AU6601_OPT_STOP_CLK BIT(2) +#define AU6601_OPT_DDR_MODE BIT(1) +#define AU6601_OPT_SD_18V BIT(0) + +#define AU6601_CLK_DELAY 0x86 +#define AU6601_CLK_DATA_POSITIVE_EDGE 0x80 +#define AU6601_CLK_CMD_POSITIVE_EDGE 0x40 +#define AU6601_CLK_POSITIVE_EDGE_ALL (AU6601_CLK_CMD_POSITIVE_EDGE \ + | AU6601_CLK_DATA_POSITIVE_EDGE) + + +#define AU6601_REG_INT_STATUS 0x90 +#define AU6601_REG_INT_ENABLE 0x94 +#define AU6601_INT_DATA_END_BIT_ERR BIT(22) +#define AU6601_INT_DATA_CRC_ERR BIT(21) +#define AU6601_INT_DATA_TIMEOUT_ERR BIT(20) +#define AU6601_INT_CMD_INDEX_ERR BIT(19) +#define AU6601_INT_CMD_END_BIT_ERR BIT(18) +#define AU6601_INT_CMD_CRC_ERR BIT(17) +#define AU6601_INT_CMD_TIMEOUT_ERR BIT(16) +#define AU6601_INT_ERROR BIT(15) +#define AU6601_INT_OVER_CURRENT_ERR BIT(8) +#define AU6601_INT_CARD_INSERT BIT(7) +#define AU6601_INT_CARD_REMOVE BIT(6) +#define AU6601_INT_READ_BUF_RDY BIT(5) +#define AU6601_INT_WRITE_BUF_RDY BIT(4) +#define AU6601_INT_DMA_END BIT(3) +#define AU6601_INT_DATA_END BIT(1) +#define AU6601_INT_CMD_END BIT(0) + +#define AU6601_INT_NORMAL_MASK 0x00007FFF +#define AU6601_INT_ERROR_MASK 0xFFFF8000 + +#define AU6601_INT_CMD_MASK (AU6601_INT_CMD_END | \ + AU6601_INT_CMD_TIMEOUT_ERR | AU6601_INT_CMD_CRC_ERR | \ + AU6601_INT_CMD_END_BIT_ERR | AU6601_INT_CMD_INDEX_ERR) +#define AU6601_INT_DATA_MASK (AU6601_INT_DATA_END | AU6601_INT_DMA_END | \ + AU6601_INT_READ_BUF_RDY | AU6601_INT_WRITE_BUF_RDY | \ + AU6601_INT_DATA_TIMEOUT_ERR | AU6601_INT_DATA_CRC_ERR | \ + AU6601_INT_DATA_END_BIT_ERR) +#define AU6601_INT_ALL_MASK ((u32)-1) + +/* MS_CARD mode registers */ + +#define AU6601_MS_STATUS 0xa0 + +#define AU6601_MS_BUS_MODE_CTRL 0xa1 +#define AU6601_MS_BUS_8BIT_MODE 0x03 +#define AU6601_MS_BUS_4BIT_MODE 0x01 +#define AU6601_MS_BUS_1BIT_MODE 0x00 + +#define AU6601_MS_TPC_CMD 0xa2 +#define AU6601_MS_TPC_READ_PAGE_DATA 0x02 +#define AU6601_MS_TPC_READ_REG 0x04 +#define AU6601_MS_TPC_GET_INT 0x07 +#define AU6601_MS_TPC_WRITE_PAGE_DATA 0x0D +#define AU6601_MS_TPC_WRITE_REG 0x0B +#define AU6601_MS_TPC_SET_RW_REG_ADRS 0x08 +#define AU6601_MS_TPC_SET_CMD 0x0E +#define AU6601_MS_TPC_EX_SET_CMD 0x09 +#define AU6601_MS_TPC_READ_SHORT_DATA 0x03 +#define AU6601_MS_TPC_WRITE_SHORT_DATA 0x0C + +#define AU6601_MS_TRANSFER_MODE 0xa3 +#define AU6601_MS_XFER_INT_TIMEOUT_CHK BIT(2) +#define AU6601_MS_XFER_DMA_ENABLE BIT(1) +#define AU6601_MS_XFER_START BIT(0) + +#define AU6601_MS_DATA_PIN_STATE 0xa4 + +#define AU6601_MS_INT_STATUS 0xb0 +#define AU6601_MS_INT_ENABLE 0xb4 +#define AU6601_MS_INT_OVER_CURRENT_ERROR BIT(23) +#define AU6601_MS_INT_DATA_CRC_ERROR BIT(21) +#define AU6601_MS_INT_INT_TIMEOUT BIT(20) +#define AU6601_MS_INT_INT_RESP_ERROR BIT(19) +#define AU6601_MS_INT_CED_ERROR BIT(18) +#define AU6601_MS_INT_TPC_TIMEOUT BIT(16) +#define AU6601_MS_INT_ERROR BIT(15) +#define AU6601_MS_INT_CARD_INSERT BIT(7) +#define AU6601_MS_INT_CARD_REMOVE BIT(6) +#define AU6601_MS_INT_BUF_READ_RDY BIT(5) +#define AU6601_MS_INT_BUF_WRITE_RDY BIT(4) +#define AU6601_MS_INT_DMA_END BIT(3) +#define AU6601_MS_INT_TPC_END BIT(1) + +#define AU6601_MS_INT_DATA_MASK 0x00000038 +#define AU6601_MS_INT_TPC_MASK 0x003d8002 +#define AU6601_MS_INT_TPC_ERROR 0x003d0000 + +#define ALCOR_PCIE_LINK_CTRL_OFFSET 0x10 +#define ALCOR_PCIE_LINK_CAP_OFFSET 0x0c +#define ALCOR_CAP_START_OFFSET 0x34 + +struct alcor_dev_cfg { + u8 dma; +}; + +struct alcor_pci_priv { + struct pci_dev *pdev; + struct pci_dev *parent_pdev; + struct device *dev; + void __iomem *iobase; + unsigned int irq; + + unsigned long id; /* idr id */ + + struct alcor_dev_cfg *cfg; + + /* PCI ASPM related vars */ + int pdev_cap_off; + u8 pdev_aspm_cap; + int parent_cap_off; + u8 parent_aspm_cap; + u8 ext_config_dev_aspm; +}; + +void alcor_write8(struct alcor_pci_priv *priv, u8 val, unsigned int addr); +void alcor_write16(struct alcor_pci_priv *priv, u16 val, unsigned int addr); +void alcor_write32(struct alcor_pci_priv *priv, u32 val, unsigned int addr); +void alcor_write32be(struct alcor_pci_priv *priv, u32 val, unsigned int addr); +u8 alcor_read8(struct alcor_pci_priv *priv, unsigned int addr); +u32 alcor_read32(struct alcor_pci_priv *priv, unsigned int addr); +u32 alcor_read32be(struct alcor_pci_priv *priv, unsigned int addr); +#endif diff --git a/include/linux/bio.h b/include/linux/bio.h index 056fb627edb3..7380b094dcca 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -491,35 +491,40 @@ do { \ bio_clear_flag(bio, BIO_THROTTLED);\ (bio)->bi_disk = (bdev)->bd_disk; \ (bio)->bi_partno = (bdev)->bd_partno; \ + bio_associate_blkg(bio); \ } while (0) #define bio_copy_dev(dst, src) \ do { \ (dst)->bi_disk = (src)->bi_disk; \ (dst)->bi_partno = (src)->bi_partno; \ + bio_clone_blkg_association(dst, src); \ } while (0) #define bio_dev(bio) \ disk_devt((bio)->bi_disk) #if defined(CONFIG_MEMCG) && defined(CONFIG_BLK_CGROUP) -int bio_associate_blkcg_from_page(struct bio *bio, struct page *page); +void bio_associate_blkg_from_page(struct bio *bio, struct page *page); #else -static inline int bio_associate_blkcg_from_page(struct bio *bio, - struct page *page) { return 0; } +static inline void bio_associate_blkg_from_page(struct bio *bio, + struct page *page) { } #endif #ifdef CONFIG_BLK_CGROUP -int bio_associate_blkcg(struct bio *bio, struct cgroup_subsys_state *blkcg_css); -int bio_associate_blkg(struct bio *bio, struct blkcg_gq *blkg); -void bio_disassociate_task(struct bio *bio); -void bio_clone_blkcg_association(struct bio *dst, struct bio *src); +void bio_disassociate_blkg(struct bio *bio); +void bio_associate_blkg(struct bio *bio); +void bio_associate_blkg_from_css(struct bio *bio, + struct cgroup_subsys_state *css); +void bio_clone_blkg_association(struct bio *dst, struct bio *src); #else /* CONFIG_BLK_CGROUP */ -static inline int bio_associate_blkcg(struct bio *bio, - struct cgroup_subsys_state *blkcg_css) { return 0; } -static inline void bio_disassociate_task(struct bio *bio) { } -static inline void bio_clone_blkcg_association(struct bio *dst, - struct bio *src) { } +static inline void bio_disassociate_blkg(struct bio *bio) { } +static inline void bio_associate_blkg(struct bio *bio) { } +static inline void bio_associate_blkg_from_css(struct bio *bio, + struct cgroup_subsys_state *css) +{ } +static inline void bio_clone_blkg_association(struct bio *dst, + struct bio *src) { } #endif /* CONFIG_BLK_CGROUP */ #ifdef CONFIG_HIGHMEM diff --git a/include/linux/blk-cgroup.h b/include/linux/blk-cgroup.h index 6d766a19f2bb..f025fd1e22e6 100644 --- a/include/linux/blk-cgroup.h +++ b/include/linux/blk-cgroup.h @@ -21,6 +21,7 @@ #include <linux/blkdev.h> #include <linux/atomic.h> #include <linux/kthread.h> +#include <linux/fs.h> /* percpu_counter batch for blkg_[rw]stats, per-cpu drift doesn't matter */ #define BLKG_STAT_CPU_BATCH (INT_MAX / 2) @@ -122,11 +123,8 @@ struct blkcg_gq { /* all non-root blkcg_gq's are guaranteed to have access to parent */ struct blkcg_gq *parent; - /* request allocation list for this blkcg-q pair */ - struct request_list rl; - /* reference count */ - atomic_t refcnt; + struct percpu_ref refcnt; /* is this blkg online? protected by both blkcg and q locks */ bool online; @@ -184,6 +182,8 @@ extern struct cgroup_subsys_state * const blkcg_root_css; struct blkcg_gq *blkg_lookup_slowpath(struct blkcg *blkcg, struct request_queue *q, bool update_hint); +struct blkcg_gq *__blkg_lookup_create(struct blkcg *blkcg, + struct request_queue *q); struct blkcg_gq *blkg_lookup_create(struct blkcg *blkcg, struct request_queue *q); int blkcg_init_queue(struct request_queue *q); @@ -230,22 +230,62 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol, char *input, struct blkg_conf_ctx *ctx); void blkg_conf_finish(struct blkg_conf_ctx *ctx); +/** + * blkcg_css - find the current css + * + * Find the css associated with either the kthread or the current task. + * This may return a dying css, so it is up to the caller to use tryget logic + * to confirm it is alive and well. + */ +static inline struct cg |