diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/mtd/spi-nor.h | 55 |
1 files changed, 41 insertions, 14 deletions
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 60bac2c0ec45..d13958de6d8a 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -51,6 +51,8 @@ #define SPINOR_OP_CLFSR 0x50 /* Clear flag status register */ #define SPINOR_OP_RDEAR 0xc8 /* Read Extended Address Register */ #define SPINOR_OP_WREAR 0xc5 /* Write Extended Address Register */ +#define SPINOR_OP_SRSTEN 0x66 /* Software Reset Enable */ +#define SPINOR_OP_SRST 0x99 /* Software Reset */ /* 4-byte address opcodes - used on Spansion and some Macronix flashes. */ #define SPINOR_OP_READ_4B 0x13 /* Read data bytes (low frequency) */ @@ -182,6 +184,7 @@ enum spi_nor_protocol { SNOR_PROTO_1_2_2_DTR = SNOR_PROTO_DTR(1, 2, 2), SNOR_PROTO_1_4_4_DTR = SNOR_PROTO_DTR(1, 4, 4), SNOR_PROTO_1_8_8_DTR = SNOR_PROTO_DTR(1, 8, 8), + SNOR_PROTO_8_8_8_DTR = SNOR_PROTO_DTR(8, 8, 8), }; static inline bool spi_nor_protocol_is_dtr(enum spi_nor_protocol proto) @@ -228,7 +231,7 @@ struct spi_nor_hwcaps { * then Quad SPI protocols before Dual SPI protocols, Fast Read and lastly * (Slow) Read. */ -#define SNOR_HWCAPS_READ_MASK GENMASK(14, 0) +#define SNOR_HWCAPS_READ_MASK GENMASK(15, 0) #define SNOR_HWCAPS_READ BIT(0) #define SNOR_HWCAPS_READ_FAST BIT(1) #define SNOR_HWCAPS_READ_1_1_1_DTR BIT(2) @@ -245,11 +248,12 @@ struct spi_nor_hwcaps { #define SNOR_HWCAPS_READ_4_4_4 BIT(9) #define SNOR_HWCAPS_READ_1_4_4_DTR BIT(10) -#define SNOR_HWCAPS_READ_OCTAL GENMASK(14, 11) +#define SNOR_HWCAPS_READ_OCTAL GENMASK(15, 11) #define SNOR_HWCAPS_READ_1_1_8 BIT(11) #define SNOR_HWCAPS_READ_1_8_8 BIT(12) #define SNOR_HWCAPS_READ_8_8_8 BIT(13) #define SNOR_HWCAPS_READ_1_8_8_DTR BIT(14) +#define SNOR_HWCAPS_READ_8_8_8_DTR BIT(15) /* * Page Program capabilities. @@ -260,18 +264,19 @@ struct spi_nor_hwcaps { * JEDEC/SFDP standard to define them. Also at this moment no SPI flash memory * implements such commands. */ -#define SNOR_HWCAPS_PP_MASK GENMASK(22, 16) -#define SNOR_HWCAPS_PP BIT(16) +#define SNOR_HWCAPS_PP_MASK GENMASK(23, 16) +#define SNOR_HWCAPS_PP BIT(16) -#define SNOR_HWCAPS_PP_QUAD GENMASK(19, 17) -#define SNOR_HWCAPS_PP_1_1_4 BIT(17) -#define SNOR_HWCAPS_PP_1_4_4 BIT(18) -#define SNOR_HWCAPS_PP_4_4_4 BIT(19) +#define SNOR_HWCAPS_PP_QUAD GENMASK(19, 17) +#define SNOR_HWCAPS_PP_1_1_4 BIT(17) +#define SNOR_HWCAPS_PP_1_4_4 BIT(18) +#define SNOR_HWCAPS_PP_4_4_4 BIT(19) -#define SNOR_HWCAPS_PP_OCTAL GENMASK(22, 20) -#define SNOR_HWCAPS_PP_1_1_8 BIT(20) -#define SNOR_HWCAPS_PP_1_8_8 BIT(21) -#define SNOR_HWCAPS_PP_8_8_8 BIT(22) +#define SNOR_HWCAPS_PP_OCTAL GENMASK(23, 20) +#define SNOR_HWCAPS_PP_1_1_8 BIT(20) +#define SNOR_HWCAPS_PP_1_8_8 BIT(21) +#define SNOR_HWCAPS_PP_8_8_8 BIT(22) +#define SNOR_HWCAPS_PP_8_8_8_DTR BIT(23) #define SNOR_HWCAPS_X_X_X (SNOR_HWCAPS_READ_2_2_2 | \ SNOR_HWCAPS_READ_4_4_4 | \ @@ -279,10 +284,14 @@ struct spi_nor_hwcaps { SNOR_HWCAPS_PP_4_4_4 | \ SNOR_HWCAPS_PP_8_8_8) +#define SNOR_HWCAPS_X_X_X_DTR (SNOR_HWCAPS_READ_8_8_8_DTR | \ + SNOR_HWCAPS_PP_8_8_8_DTR) + #define SNOR_HWCAPS_DTR (SNOR_HWCAPS_READ_1_1_1_DTR | \ SNOR_HWCAPS_READ_1_2_2_DTR | \ SNOR_HWCAPS_READ_1_4_4_DTR | \ - SNOR_HWCAPS_READ_1_8_8_DTR) + SNOR_HWCAPS_READ_1_8_8_DTR | \ + SNOR_HWCAPS_READ_8_8_8_DTR) #define SNOR_HWCAPS_ALL (SNOR_HWCAPS_READ_MASK | \ SNOR_HWCAPS_PP_MASK) @@ -318,6 +327,22 @@ struct spi_nor_controller_ops { int (*erase)(struct spi_nor *nor, loff_t offs); }; +/** + * enum spi_nor_cmd_ext - describes the command opcode extension in DTR mode + * @SPI_NOR_EXT_NONE: no extension. This is the default, and is used in Legacy + * SPI mode + * @SPI_NOR_EXT_REPEAT: the extension is same as the opcode + * @SPI_NOR_EXT_INVERT: the extension is the bitwise inverse of the opcode + * @SPI_NOR_EXT_HEX: the extension is any hex value. The command and opcode + * combine to form a 16-bit opcode. + */ +enum spi_nor_cmd_ext { + SPI_NOR_EXT_NONE = 0, + SPI_NOR_EXT_REPEAT, + SPI_NOR_EXT_INVERT, + SPI_NOR_EXT_HEX, +}; + /* * Forward declarations that are used internally by the core and manufacturer * drivers. @@ -345,6 +370,7 @@ struct spi_nor_flash_parameter; * @program_opcode: the program opcode * @sst_write_second: used by the SST write operation * @flags: flag options for the current SPI NOR (SNOR_F_*) + * @cmd_ext_type: the command opcode extension type for DTR mode. * @read_proto: the SPI protocol for read operations * @write_proto: the SPI protocol for write operations * @reg_proto: the SPI protocol for read_reg/write_reg/erase operations @@ -376,6 +402,7 @@ struct spi_nor { enum spi_nor_protocol reg_proto; bool sst_write_second; u32 flags; + enum spi_nor_cmd_ext cmd_ext_type; const struct spi_nor_controller_ops *controller_ops; @@ -406,7 +433,7 @@ static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor) * @name: the chip type name * @hwcaps: the hardware capabilities supported by the controller driver * - * The drivers can use this fuction to scan the SPI NOR. + * The drivers can use this function to scan the SPI NOR. * In the scanning, it will try to get all the necessary information to * fill the mtd_info{} and the spi_nor{}. * |