diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/dmar.h | 8 | ||||
| -rw-r--r-- | include/linux/fdtable.h | 1 | ||||
| -rw-r--r-- | include/linux/firmware/intel/stratix10-smc.h | 312 | ||||
| -rw-r--r-- | include/linux/firmware/intel/stratix10-svc-client.h | 217 | ||||
| -rw-r--r-- | include/linux/fsl/mc.h | 12 | ||||
| -rw-r--r-- | include/linux/hyperv.h | 17 | ||||
| -rw-r--r-- | include/linux/mtd/mtd.h | 2 | ||||
| -rw-r--r-- | include/linux/nvmem-provider.h | 11 | ||||
| -rw-r--r-- | include/linux/pci.h | 8 | ||||
| -rw-r--r-- | include/uapi/linux/android/binder_ctl.h | 35 | ||||
| -rw-r--r-- | include/uapi/linux/magic.h | 1 |
11 files changed, 601 insertions, 23 deletions
diff --git a/include/linux/dmar.h b/include/linux/dmar.h index 843a41ba7e28..f8af1d770520 100644 --- a/include/linux/dmar.h +++ b/include/linux/dmar.h @@ -39,6 +39,7 @@ struct acpi_dmar_header; /* DMAR Flags */ #define DMAR_INTR_REMAP 0x1 #define DMAR_X2APIC_OPT_OUT 0x2 +#define DMAR_PLATFORM_OPT_IN 0x4 struct intel_iommu; @@ -170,6 +171,8 @@ static inline int dmar_ir_hotplug(struct dmar_drhd_unit *dmaru, bool insert) { return 0; } #endif /* CONFIG_IRQ_REMAP */ +extern bool dmar_platform_optin(void); + #else /* CONFIG_DMAR_TABLE */ static inline int dmar_device_add(void *handle) @@ -182,6 +185,11 @@ static inline int dmar_device_remove(void *handle) return 0; } +static inline bool dmar_platform_optin(void) +{ + return false; +} + #endif /* CONFIG_DMAR_TABLE */ struct irte { diff --git a/include/linux/fdtable.h b/include/linux/fdtable.h index 41615f38bcff..f07c55ea0c22 100644 --- a/include/linux/fdtable.h +++ b/include/linux/fdtable.h @@ -121,6 +121,7 @@ extern void __fd_install(struct files_struct *files, unsigned int fd, struct file *file); extern int __close_fd(struct files_struct *files, unsigned int fd); +extern int __close_fd_get_file(unsigned int fd, struct file **res); extern struct kmem_cache *files_cachep; diff --git a/include/linux/firmware/intel/stratix10-smc.h b/include/linux/firmware/intel/stratix10-smc.h new file mode 100644 index 000000000000..5be5dab50b13 --- /dev/null +++ b/include/linux/firmware/intel/stratix10-smc.h @@ -0,0 +1,312 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2017-2018, Intel Corporation + */ + +#ifndef __STRATIX10_SMC_H +#define __STRATIX10_SMC_H + +#include <linux/arm-smccc.h> +#include <linux/bitops.h> + +/** + * This file defines the Secure Monitor Call (SMC) message protocol used for + * service layer driver in normal world (EL1) to communicate with secure + * monitor software in Secure Monitor Exception Level 3 (EL3). + * + * This file is shared with secure firmware (FW) which is out of kernel tree. + * + * An ARM SMC instruction takes a function identifier and up to 6 64-bit + * register values as arguments, and can return up to 4 64-bit register + * value. The operation of the secure monitor is determined by the parameter + * values passed in through registers. + * + * EL1 and EL3 communicates pointer as physical address rather than the + * virtual address. + * + * Functions specified by ARM SMC Calling convention: + * + * FAST call executes atomic operations, returns when the requested operation + * has completed. + * STD call starts a operation which can be preempted by a non-secure + * interrupt. The call can return before the requested operation has + * completed. + * + * a0..a7 is used as register names in the descriptions below, on arm32 + * that translates to r0..r7 and on arm64 to w0..w7. + */ + +/** + * @func_num: function ID + */ +#define INTEL_SIP_SMC_STD_CALL_VAL(func_num) \ + ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_SMC_64, \ + ARM_SMCCC_OWNER_SIP, (func_num)) + +#define INTEL_SIP_SMC_FAST_CALL_VAL(func_num) \ + ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64, \ + ARM_SMCCC_OWNER_SIP, (func_num)) + +/** + * Return values in INTEL_SIP_SMC_* call + * + * INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION: + * Secure monitor software doesn't recognize the request. + * + * INTEL_SIP_SMC_STATUS_OK: + * FPGA configuration completed successfully, + * In case of FPGA configuration write operation, it means secure monitor + * software can accept the next chunk of FPGA configuration data. + * + * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY: + * In case of FPGA configuration write operation, it means secure monitor + * software is still processing previous data & can't accept the next chunk + * of data. Service driver needs to issue + * INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE call to query the + * completed block(s). + * + * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR: + * There is error during the FPGA configuration process. + * + * INTEL_SIP_SMC_REG_ERROR: + * There is error during a read or write operation of the protected registers. + * + * INTEL_SIP_SMC_RSU_ERROR: + * There is error during a remote status update. + */ +#define INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION 0xFFFFFFFF +#define INTEL_SIP_SMC_STATUS_OK 0x0 +#define INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY 0x1 +#define INTEL_SIP_SMC_FPGA_CONFIG_STATUS_REJECTED 0x2 +#define INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR 0x4 +#define INTEL_SIP_SMC_REG_ERROR 0x5 +#define INTEL_SIP_SMC_RSU_ERROR 0x7 + +/** + * Request INTEL_SIP_SMC_FPGA_CONFIG_START + * + * Sync call used by service driver at EL1 to request the FPGA in EL3 to + * be prepare to receive a new configuration. + * + * Call register usage: + * a0: INTEL_SIP_SMC_FPGA_CONFIG_START. + * a1: flag for full or partial configuration. 0 for full and 1 for partial + * configuration. + * a2-7: not used. + * + * Return status: + * a0: INTEL_SIP_SMC_STATUS_OK, or INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR. + * a1-3: not used. + */ +#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_START 1 +#define INTEL_SIP_SMC_FPGA_CONFIG_START \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_START) + +/** + * Request INTEL_SIP_SMC_FPGA_CONFIG_WRITE + * + * Async call used by service driver at EL1 to provide FPGA configuration data + * to secure world. + * + * Call register usage: + * a0: INTEL_SIP_SMC_FPGA_CONFIG_WRITE. + * a1: 64bit physical address of the configuration data memory block + * a2: Size of configuration data block. + * a3-7: not used. + * + * Return status: + * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY or + * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR. + * a1: 64bit physical address of 1st completed memory block if any completed + * block, otherwise zero value. + * a2: 64bit physical address of 2nd completed memory block if any completed + * block, otherwise zero value. + * a3: 64bit physical address of 3rd completed memory block if any completed + * block, otherwise zero value. + */ +#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_WRITE 2 +#define INTEL_SIP_SMC_FPGA_CONFIG_WRITE \ + INTEL_SIP_SMC_STD_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_WRITE) + +/** + * Request INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE + * + * Sync call used by service driver at EL1 to track the completed write + * transactions. This request is called after INTEL_SIP_SMC_FPGA_CONFIG_WRITE + * call returns INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY. + * + * Call register usage: + * a0: INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE. + * a1-7: not used. + * + * Return status: + * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY or + * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR. + * a1: 64bit physical address of 1st completed memory block. + * a2: 64bit physical address of 2nd completed memory block if + * any completed block, otherwise zero value. + * a3: 64bit physical address of 3rd completed memory block if + * any completed block, otherwise zero value. + */ +#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE 3 +#define INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE \ +INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE) + +/** + * Request INTEL_SIP_SMC_FPGA_CONFIG_ISDONE + * + * Sync call used by service driver at EL1 to inform secure world that all + * data are sent, to check whether or not the secure world had completed + * the FPGA configuration process. + * + * Call register usage: + * a0: INTEL_SIP_SMC_FPGA_CONFIG_ISDONE. + * a1-7: not used. + * + * Return status: + * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY or + * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR. + * a1-3: not used. + */ +#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_ISDONE 4 +#define INTEL_SIP_SMC_FPGA_CONFIG_ISDONE \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_ISDONE) + +/** + * Request INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM + * + * Sync call used by service driver at EL1 to query the physical address of + * memory block reserved by secure monitor software. + * + * Call register usage: + * a0:INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM. + * a1-7: not used. + * + * Return status: + * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR. + * a1: start of physical address of reserved memory block. + * a2: size of reserved memory block. + * a3: not used. + */ +#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_GET_MEM 5 +#define INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_GET_MEM) + +/** + * Request INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK + * + * For SMC loop-back mode only, used for internal integration, debugging + * or troubleshooting. + * + * Call register usage: + * a0: INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK. + * a1-7: not used. + * + * Return status: + * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR. + * a1-3: not used. + */ +#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_LOOPBACK 6 +#define INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_LOOPBACK) + +/* + * Request INTEL_SIP_SMC_REG_READ + * + * Read a protected register at EL3 + * + * Call register usage: + * a0: INTEL_SIP_SMC_REG_READ. + * a1: register address. + * a2-7: not used. + * + * Return status: + * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR. + * a1: value in the register + * a2-3: not used. + */ +#define INTEL_SIP_SMC_FUNCID_REG_READ 7 +#define INTEL_SIP_SMC_REG_READ \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_READ) + +/* + * Request INTEL_SIP_SMC_REG_WRITE + * + * Write a protected register at EL3 + * + * Call register usage: + * a0: INTEL_SIP_SMC_REG_WRITE. + * a1: register address + * a2: value to program into register. + * a3-7: not used. + * + * Return status: + * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR. + * a1-3: not used. + */ +#define INTEL_SIP_SMC_FUNCID_REG_WRITE 8 +#define INTEL_SIP_SMC_REG_WRITE \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_WRITE) + +/* + * Request INTEL_SIP_SMC_FUNCID_REG_UPDATE + * + * Update one or more bits in a protected register at EL3 using a + * read-modify-write operation. + * + * Call register usage: + * a0: INTEL_SIP_SMC_REG_UPDATE. + * a1: register address + * a2: write Mask. + * a3: value to write. + * a4-7: not used. + * + * Return status: + * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR. + * a1-3: Not used. + */ +#define INTEL_SIP_SMC_FUNCID_REG_UPDATE 9 +#define INTEL_SIP_SMC_REG_UPDATE \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_UPDATE) + +/* + * Request INTEL_SIP_SMC_RSU_STATUS + * + * Request remote status update boot log, call is synchronous. + * + * Call register usage: + * a0 INTEL_SIP_SMC_RSU_STATUS + * a1-7 not used + * + * Return status + * a0: Current Image + * a1: Last Failing Image + * a2: Version | State + * a3: Error details | Error location + * + * Or + * + * a0: INTEL_SIP_SMC_RSU_ERROR + */ +#define INTEL_SIP_SMC_FUNCID_RSU_STATUS 11 +#define INTEL_SIP_SMC_RSU_STATUS \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_STATUS) + +/* + * Request INTEL_SIP_SMC_RSU_UPDATE + * + * Request to set the offset of the bitstream to boot after reboot, call + * is synchronous. + * + * Call register usage: + * a0 INTEL_SIP_SMC_RSU_UPDATE + * a1 64bit physical address of the configuration data memory in flash + * a2-7 not used + * + * Return status + * a0 INTEL_SIP_SMC_STATUS_OK + */ +#define INTEL_SIP_SMC_FUNCID_RSU_UPDATE 12 +#define INTEL_SIP_SMC_RSU_UPDATE \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_UPDATE) +#endif diff --git a/include/linux/firmware/intel/stratix10-svc-client.h b/include/linux/firmware/intel/stratix10-svc-client.h new file mode 100644 index 000000000000..e521f172a47a --- /dev/null +++ b/include/linux/firmware/intel/stratix10-svc-client.h @@ -0,0 +1,217 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2017-2018, Intel Corporation + */ + +#ifndef __STRATIX10_SVC_CLIENT_H +#define __STRATIX10_SVC_CLIENT_H + +/** + * Service layer driver supports client names + * + * fpga: for FPGA configuration + * rsu: for remote status update + */ +#define SVC_CLIENT_FPGA "fpga" +#define SVC_CLIENT_RSU "rsu" + +/** + * Status of the sent command, in bit number + * + * SVC_COMMAND_STATUS_RECONFIG_REQUEST_OK: + * Secure firmware accepts the request of FPGA reconfiguration. + * + * SVC_STATUS_RECONFIG_BUFFER_SUBMITTED: + * Service client successfully submits FPGA configuration + * data buffer to secure firmware. + * + * SVC_COMMAND_STATUS_RECONFIG_BUFFER_DONE: + * Secure firmware completes data process, ready to accept the + * next WRITE transaction. + * + * SVC_COMMAND_STATUS_RECONFIG_COMPLETED: + * Secure firmware completes FPGA configuration successfully, FPGA should + * be in user mode. + * + * SVC_COMMAND_STATUS_RECONFIG_BUSY: + * FPGA configuration is still in process. + * + * SVC_COMMAND_STATUS_RECONFIG_ERROR: + * Error encountered during FPGA configuration. + * + * SVC_STATUS_RSU_OK: + * Secure firmware accepts the request of remote status update (RSU). + */ +#define SVC_STATUS_RECONFIG_REQUEST_OK 0 +#define SVC_STATUS_RECONFIG_BUFFER_SUBMITTED 1 +#define SVC_STATUS_RECONFIG_BUFFER_DONE 2 +#define SVC_STATUS_RECONFIG_COMPLETED 3 +#define SVC_STATUS_RECONFIG_BUSY 4 +#define SVC_STATUS_RECONFIG_ERROR 5 +#define SVC_STATUS_RSU_OK 6 +#define SVC_STATUS_RSU_ERROR 7 +/** + * Flag bit for COMMAND_RECONFIG + * + * COMMAND_RECONFIG_FLAG_PARTIAL: + * Set to FPGA configuration type (full or partial), the default + * is full reconfig. + */ +#define COMMAND_RECONFIG_FLAG_PARTIAL 0 + +/** + * Timeout settings for service clients: + * timeout value used in Stratix10 FPGA manager driver. + * timeout value used in RSU driver + */ +#define SVC_RECONFIG_REQUEST_TIMEOUT_MS 100 +#define SVC_RECONFIG_BUFFER_TIMEOUT_MS 240 +#define SVC_RSU_REQUEST_TIMEOUT_MS 300 + +struct stratix10_svc_chan; + +/** + * enum stratix10_svc_command_code - supported service commands + * + * @COMMAND_NOOP: do 'dummy' request for integration/debug/trouble-shooting + * + * @COMMAND_RECONFIG: ask for FPGA configuration preparation, return status + * is SVC_STATUS_RECONFIG_REQUEST_OK + * + * @COMMAND_RECONFIG_DATA_SUBMIT: submit buffer(s) of bit-stream data for the + * FPGA configuration, return status is SVC_STATUS_RECONFIG_BUFFER_SUBMITTED, + * or SVC_STATUS_RECONFIG_ERROR + * + * @COMMAND_RECONFIG_DATA_CLAIM: check the status of the configuration, return + * status is SVC_STATUS_RECONFIG_COMPLETED, or SVC_STATUS_RECONFIG_BUSY, or + * SVC_STATUS_RECONFIG_ERROR + * + * @COMMAND_RECONFIG_STATUS: check the status of the configuration, return + * status is SVC_STATUS_RECONFIG_COMPLETED, or SVC_STATUS_RECONFIG_BUSY, or + * SVC_STATUS_RECONFIG_ERROR + * + * @COMMAND_RSU_STATUS: request remote system update boot log, return status + * is log data or SVC_STATUS_RSU_ERROR + * + * @COMMAND_RSU_UPDATE: set the offset of the bitstream to boot after reboot, + * return status is SVC_STATUS_RSU_OK or SVC_STATUS_RSU_ERROR + */ +enum stratix10_svc_command_code { + COMMAND_NOOP = 0, + COMMAND_RECONFIG, + COMMAND_RECONFIG_DATA_SUBMIT, + COMMAND_RECONFIG_DATA_CLAIM, + COMMAND_RECONFIG_STATUS, + COMMAND_RSU_STATUS, + COMMAND_RSU_UPDATE +}; + +/** + * struct stratix10_svc_client_msg - message sent by client to service + * @payload: starting address of data need be processed + * @payload_length: data size in bytes + * @command: service command + * @arg: args to be passed via registers and not physically mapped buffers + */ +struct stratix10_svc_client_msg { + void *payload; + size_t payload_length; + enum stratix10_svc_command_code command; + u64 arg[3]; +}; + +/** + * struct stratix10_svc_command_config_type - config type + * @flags: flag bit for the type of FPGA configuration + */ +struct stratix10_svc_command_config_type { + u32 flags; +}; + +/** + * struct stratix10_svc_cb_data - callback data structure from service layer + * @status: the status of sent command + * @kaddr1: address of 1st completed data block + * @kaddr2: address of 2nd completed data block + * @kaddr3: address of 3rd completed data block + */ +struct stratix10_svc_cb_data { + u32 status; + void *kaddr1; + void *kaddr2; + void *kaddr3; +}; + +/** + * struct stratix10_svc_client - service client structure + * @dev: the client device + * @receive_cb: callback to provide service client the received data + * @priv: client private data + */ +struct stratix10_svc_client { + struct device *dev; + void (*receive_cb)(struct stratix10_svc_client *client, + struct stratix10_svc_cb_data *cb_data); + void *priv; +}; + +/** + * stratix10_svc_request_channel_byname() - request service channel + * @client: identity of the client requesting the channel + * @name: supporting client name defined above + * + * Return: a pointer to channel assigned to the client on success, + * or ERR_PTR() on error. + */ +struct stratix10_svc_chan +*stratix10_svc_request_channel_byname(struct stratix10_svc_client *client, + const char *name); + +/** + * stratix10_svc_free_channel() - free service channel. + * @chan: service channel to be freed + */ +void stratix10_svc_free_channel(struct stratix10_svc_chan *chan); + +/** + * stratix10_svc_allocate_memory() - allocate the momory + * @chan: service channel assigned to the client + * @size: number of bytes client requests + * + * Service layer allocates the requested number of bytes from the memory + * pool for the client. + * + * Return: the starting address of allocated memory on success, or + * ERR_PTR() on error. + */ +void *stratix10_svc_allocate_memory(struct stratix10_svc_chan *chan, + size_t size); + +/** + * stratix10_svc_free_memory() - free allocated memory + * @chan: service channel assigned to the client + * @kaddr: starting address of memory to be free back to pool + */ +void stratix10_svc_free_memory(struct stratix10_svc_chan *chan, void *kaddr); + +/** + * stratix10_svc_send() - send a message to the remote + * @chan: service channel assigned to the client + * @msg: message data to be sent, in the format of + * struct stratix10_svc_client_msg + * + * Return: 0 for success, -ENOMEM or -ENOBUFS on error. + */ +int stratix10_svc_send(struct stratix10_svc_chan *chan, void *msg); + +/** + * intel_svc_done() - complete service request + * @chan: service channel assigned to the client + * + * This function is used by service client to inform service layer that + * client's service requests are completed, or there is an error in the + * request process. + */ +void stratix10_svc_done(struct stratix10_svc_chan *chan); +#endif + diff --git a/include/linux/fsl/mc.h b/include/linux/fsl/mc.h index 9d3f668df7df..741f567253ef 100644 --- a/include/linux/fsl/mc.h +++ b/include/linux/fsl/mc.h @@ -210,8 +210,8 @@ struct mc_cmd_header { }; struct fsl_mc_command { - u64 header; - u64 params[MC_CMD_NUM_OF_PARAMS]; + __le64 header; + __le64 params[MC_CMD_NUM_OF_PARAMS]; }; enum mc_cmd_status { @@ -238,11 +238,11 @@ enum mc_cmd_status { /* Command completion flag */ #define MC_CMD_FLAG_INTR_DIS 0x01 -static inline u64 mc_encode_cmd_header(u16 cmd_id, - u32 cmd_flags, - u16 token) +static inline __le64 mc_encode_cmd_header(u16 cmd_id, + u32 cmd_flags, + u16 token) { - u64 header = 0; + __le64 header = 0; struct mc_cmd_header *hdr = (struct mc_cmd_header *)&header; hdr->cmd_id = cpu_to_le16(cmd_id); diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 14131b6fae68..f0885cc01db6 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -831,15 +831,6 @@ struct vmbus_channel { */ struct list_head sc_list; /* - * Current number of sub-channels. - */ - int num_sc; - /* - * Number of a sub-channel (position within sc_list) which is supposed - * to be used as the next outgoing channel. - */ - int next_oc; - /* * The primary channel this sub-channel belongs to. * This will be NULL for the primary channel. */ @@ -973,14 +964,6 @@ void vmbus_set_chn_rescind_callback(struct vmbus_channel *channel, void (*chn_rescind_cb)(struct vmbus_channel *)); /* - * Retrieve the (sub) channel on which to send an outgoing request. - * When a primary channel has multiple sub-channels, we choose a - * channel whose VCPU binding is closest to the VCPU on which - * this call is being made. - */ -struct vmbus_channel *vmbus_get_outgoing_channel(struct vmbus_channel *primary); - -/* * Check if sub-channels have already been offerred. This API will be useful * when the driver is unloaded after establishing sub-channels. In this case, * when the driver is re-loaded, the driver would have to check if the diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index ba8fa9072aca..677768b21a1d 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -25,6 +25,7 @@ #include <linux/notifier.h> #include <linux/device.h> #include <linux/of.h> +#include <linux/nvmem-provider.h> #include <mtd/mtd-abi.h> @@ -342,6 +343,7 @@ struct mtd_info { struct device dev; int usecount; struct mtd_debug_info dbg; + struct nvmem_device *nvmem; }; int mtd_ooblayout_ecc(struct mtd_info *mtd, int section, diff --git a/include/linux/nvmem-provider.h b/include/linux/nvmem-provider.h index 1e3283c2af77..fe051323be0a 100644 --- a/include/linux/nvmem-provider.h +++ b/include/linux/nvmem-provider.h @@ -19,6 +19,13 @@ typedef int (*nvmem_reg_read_t)(void *priv, unsigned int offset, typedef int (*nvmem_reg_write_t)(void *priv, unsigned int offset, void *val, size_t bytes); +enum nvmem_type { + NVMEM_TYPE_UNKNOWN = 0, + NVMEM_TYPE_EEPROM, + NVMEM_TYPE_OTP, + NVMEM_TYPE_BATTERY_BACKED, +}; + /** * struct nvmem_config - NVMEM device configuration * @@ -28,8 +35,10 @@ typedef int (*nvmem_reg_write_t)(void *priv, unsigned int offset, * @owner: Pointer to exporter module. Used for refcounting. * @cells: Optional array of pre-defined NVMEM cells. * @ncells: Number of elements in cells. + * @type: Type of the nvmem storage * @read_only: Device is read-only. * @root_only: Device is accessibly to root only. + * @no_of_node: Device should not use the parent's of_node even if it's !NULL. * @reg_read: Callback to read data. * @reg_write: Callback to write data. * @size: Device size. @@ -51,8 +60,10 @@ struct nvmem_config { struct module *owner; const struct nvmem_cell_info *cells; int ncells; + enum nvmem_type type; bool read_only; bool root_only; + bool no_of_node; nvmem_reg_read_t reg_read; nvmem_reg_write_t reg_write; int size; diff --git a/include/linux/pci.h b/include/linux/pci.h index 51a5a5217667..1ab78a23ae08 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -396,6 +396,14 @@ struct pci_dev { unsigned int is_hotplug_bridge:1; unsigned int shpc_managed:1; /* SHPC owned by shpchp */ unsigned int is_thunderbolt:1; /* Thunderbolt controller */ + /* + * Devices marked being untrusted are the ones that can potentially + * execute DMA attacks and similar. They are typically connected + * through external ports such as Thunderbolt but not limited to + * that. When an IOMMU is enabled they should be getting full + * mappings to make sure they cannot access arbitrary memory. + */ + unsigned int untrusted:1; unsigned int __aer_firmware_first_valid:1; unsigned int __aer_firmware_first:1; unsigned int broken_intx_masking:1; /* INTx masking can't be used */ diff --git a/include/uapi/linux/android/binder_ctl.h b/include/uapi/linux/android/binder_ctl.h new file mode 100644 index 000000000000..65b2efd1a0a5 --- /dev/null +++ b/include/uapi/linux/android/binder_ctl.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright (C) 2018 Canonical Ltd. + * + */ + +#ifndef _UAPI_LINUX_BINDER_CTL_H +#define _UAPI_LINUX_BINDER_CTL_H + +#include <linux/android/binder.h> +#include <linux/types.h> +#include <linux/ioctl.h> + +#define BINDERFS_MAX_NAME 255 + +/** + * struct binderfs_device - retrieve information about a new binder device + * @name: the name to use for the new binderfs binder device + * @major: major number allocated for binderfs binder devices + * @minor: minor number allocated for the new binderfs binder device + * + */ +struct binderfs_device { + char name[BINDERFS_MAX_NAME + 1]; + __u8 major; + __u8 minor; +}; + +/** + * Allocate a new binder device. + */ +#define BINDER_CTL_ADD _IOWR('b', 1, struct binderfs_device) + +#endif /* _UAPI_LINUX_BINDER_CTL_H */ + diff --git a/include/uapi/linux/magic.h b/include/uapi/linux/magic.h index 96c24478d8ce..f8c00045d537 100644 --- a/include/uapi/linux/magic.h +++ b/include/uapi/linux/magic.h @@ -73,6 +73,7 @@ #define DAXFS_MAGIC 0x64646178 #define BINFMTFS_MAGIC 0x42494e4d #define DEVPTS_SUPER_MAGIC 0x1cd1 +#define BINDERFS_SUPER_MAGIC 0x6c6f6f70 #define FUTEXFS_SUPER_MAGIC 0xBAD1DEA #define PIPEFS_MAGIC 0x50495045 #define PROC_SUPER_MAGIC 0x9fa0 |