diff options
Diffstat (limited to 'drivers')
100 files changed, 10585 insertions, 1099 deletions
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 4d8c00eac742..2764d713fea8 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -195,6 +195,17 @@ config PINCTRL_RZA1 help This selects pinctrl driver for Renesas RZ/A1 platforms. +config PINCTRL_RZA2 + bool "Renesas RZ/A2 gpio and pinctrl driver" + depends on OF + depends on ARCH_R7S9210 || COMPILE_TEST + select GPIOLIB + select GENERIC_PINCTRL_GROUPS + select GENERIC_PINMUX_FUNCTIONS + select GENERIC_PINCONF + help + This selects GPIO and pinctrl driver for Renesas RZ/A2 platforms. + config PINCTRL_RZN1 bool "Renesas RZ/N1 pinctrl driver" depends on OF @@ -339,15 +350,15 @@ config PINCTRL_RK805 This selects the pinctrl driver for RK805. config PINCTRL_OCELOT - bool "Pinctrl driver for the Microsemi Ocelot SoCs" - default y + bool "Pinctrl driver for the Microsemi Ocelot and Jaguar2 SoCs" depends on OF - depends on MSCC_OCELOT || COMPILE_TEST + depends on HAS_IOMEM select GPIOLIB select GPIOLIB_IRQCHIP select GENERIC_PINCONF select GENERIC_PINCTRL_GROUPS select GENERIC_PINMUX_FUNCTIONS + select OF_GPIO select REGMAP_MMIO source "drivers/pinctrl/actions/Kconfig" diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 18a13c1e2c21..712184b74a5c 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_PINCTRL_PIC32) += pinctrl-pic32.o obj-$(CONFIG_PINCTRL_PISTACHIO) += pinctrl-pistachio.o obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o obj-$(CONFIG_PINCTRL_RZA1) += pinctrl-rza1.o +obj-$(CONFIG_PINCTRL_RZA2) += pinctrl-rza2.o obj-$(CONFIG_PINCTRL_RZN1) += pinctrl-rzn1.o obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o obj-$(CONFIG_PINCTRL_SIRF) += sirf/ diff --git a/drivers/pinctrl/actions/Kconfig b/drivers/pinctrl/actions/Kconfig index 2397cb0f6011..c7ed1d481802 100644 --- a/drivers/pinctrl/actions/Kconfig +++ b/drivers/pinctrl/actions/Kconfig @@ -9,6 +9,12 @@ config PINCTRL_OWL help Say Y here to enable Actions Semi OWL pinctrl driver +config PINCTRL_S700 + bool "Actions Semi S700 pinctrl driver" + depends on PINCTRL_OWL + help + Say Y here to enable Actions Semi S700 pinctrl driver + config PINCTRL_S900 bool "Actions Semi S900 pinctrl driver" depends on PINCTRL_OWL diff --git a/drivers/pinctrl/actions/Makefile b/drivers/pinctrl/actions/Makefile index bd232d28400f..86521ed837dd 100644 --- a/drivers/pinctrl/actions/Makefile +++ b/drivers/pinctrl/actions/Makefile @@ -1,2 +1,3 @@ obj-$(CONFIG_PINCTRL_OWL) += pinctrl-owl.o +obj-$(CONFIG_PINCTRL_S700) += pinctrl-s700.o obj-$(CONFIG_PINCTRL_S900) += pinctrl-s900.o diff --git a/drivers/pinctrl/actions/pinctrl-owl.c b/drivers/pinctrl/actions/pinctrl-owl.c index 9d18c02f192b..5dfe7188a5f8 100644 --- a/drivers/pinctrl/actions/pinctrl-owl.c +++ b/drivers/pinctrl/actions/pinctrl-owl.c @@ -246,60 +246,6 @@ static int owl_pad_pinconf_reg(const struct owl_padinfo *info, return 0; } -static int owl_pad_pinconf_arg2val(const struct owl_padinfo *info, - unsigned int param, - u32 *arg) -{ - switch (param) { - case PIN_CONFIG_BIAS_BUS_HOLD: - *arg = OWL_PINCONF_PULL_HOLD; - break; - case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: - *arg = OWL_PINCONF_PULL_HIZ; - break; - case PIN_CONFIG_BIAS_PULL_DOWN: - *arg = OWL_PINCONF_PULL_DOWN; - break; - case PIN_CONFIG_BIAS_PULL_UP: - *arg = OWL_PINCONF_PULL_UP; - break; - case PIN_CONFIG_INPUT_SCHMITT_ENABLE: - *arg = (*arg >= 1 ? 1 : 0); - break; - default: - return -ENOTSUPP; - } - - return 0; -} - -static int owl_pad_pinconf_val2arg(const struct owl_padinfo *padinfo, - unsigned int param, - u32 *arg) -{ - switch (param) { - case PIN_CONFIG_BIAS_BUS_HOLD: - *arg = *arg == OWL_PINCONF_PULL_HOLD; - break; - case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: - *arg = *arg == OWL_PINCONF_PULL_HIZ; - break; - case PIN_CONFIG_BIAS_PULL_DOWN: - *arg = *arg == OWL_PINCONF_PULL_DOWN; - break; - case PIN_CONFIG_BIAS_PULL_UP: - *arg = *arg == OWL_PINCONF_PULL_UP; - break; - case PIN_CONFIG_INPUT_SCHMITT_ENABLE: - *arg = *arg == 1; - break; - default: - return -ENOTSUPP; - } - - return 0; -} - static int owl_pin_config_get(struct pinctrl_dev *pctrldev, unsigned int pin, unsigned long *config) @@ -318,7 +264,10 @@ static int owl_pin_config_get(struct pinctrl_dev *pctrldev, arg = owl_read_field(pctrl, reg, bit, width); - ret = owl_pad_pinconf_val2arg(info, param, &arg); + if (!pctrl->soc->padctl_val2arg) + return -ENOTSUPP; + + ret = pctrl->soc->padctl_val2arg(info, param, &arg); if (ret) return ret; @@ -349,7 +298,10 @@ static int owl_pin_config_set(struct pinctrl_dev *pctrldev, if (ret) return ret; - ret = owl_pad_pinconf_arg2val(info, param, &arg); + if (!pctrl->soc->padctl_arg2val) + return -ENOTSUPP; + + ret = pctrl->soc->padctl_arg2val(info, param, &arg); if (ret) return ret; @@ -787,7 +739,7 @@ static void owl_gpio_irq_mask(struct irq_data *data) val = readl_relaxed(gpio_base + port->intc_msk); if (val == 0) owl_gpio_update_reg(gpio_base + port->intc_ctl, - OWL_GPIO_CTLR_ENABLE, false); + OWL_GPIO_CTLR_ENABLE + port->shared_ctl_offset * 5, false); raw_spin_unlock_irqrestore(&pctrl->lock, flags); } @@ -811,7 +763,8 @@ static void owl_gpio_irq_unmask(struct irq_data *data) /* enable port interrupt */ value = readl_relaxed(gpio_base + port->intc_ctl); - value |= BIT(OWL_GPIO_CTLR_ENABLE) | BIT(OWL_GPIO_CTLR_SAMPLE_CLK_24M); + value |= ((BIT(OWL_GPIO_CTLR_ENABLE) | BIT(OWL_GPIO_CTLR_SAMPLE_CLK_24M)) + << port->shared_ctl_offset * 5); writel_relaxed(value, gpio_base + port->intc_ctl); /* enable GPIO interrupt */ @@ -849,7 +802,7 @@ static void owl_gpio_irq_ack(struct irq_data *data) raw_spin_lock_irqsave(&pctrl->lock, flags); owl_gpio_update_reg(gpio_base + port->intc_ctl, - OWL_GPIO_CTLR_PENDING, true); + OWL_GPIO_CTLR_PENDING + port->shared_ctl_offset * 5, true); raw_spin_unlock_irqrestore(&pctrl->lock, flags); } diff --git a/drivers/pinctrl/actions/pinctrl-owl.h b/drivers/pinctrl/actions/pinctrl-owl.h index a724d1d406d4..dae2e8363fd5 100644 --- a/drivers/pinctrl/actions/pinctrl-owl.h +++ b/drivers/pinctrl/actions/pinctrl-owl.h @@ -15,12 +15,135 @@ #define OWL_PINCONF_SLEW_SLOW 0 #define OWL_PINCONF_SLEW_FAST 1 -enum owl_pinconf_pull { - OWL_PINCONF_PULL_HIZ, - OWL_PINCONF_PULL_DOWN, - OWL_PINCONF_PULL_UP, - OWL_PINCONF_PULL_HOLD, -}; +#define MUX_PG(group_name, reg, shift, width) \ + { \ + .name = #group_name, \ + .pads = group_name##_pads, \ + .npads = ARRAY_SIZE(gro |