diff options
Diffstat (limited to 'drivers')
65 files changed, 1443 insertions, 565 deletions
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 47352d25c15e..567788664723 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -27,6 +27,20 @@ config CLKBLD_I8253 config CLKSRC_MMIO bool +config BCM2835_TIMER + bool "BCM2835 timer driver" if COMPILE_TEST + depends on GENERIC_CLOCKEVENTS + select CLKSRC_MMIO + help + Enables the support for the BCM2835 timer driver. + +config BCM_KONA_TIMER + bool "BCM mobile timer driver" if COMPILE_TEST + depends on GENERIC_CLOCKEVENTS + select CLKSRC_MMIO + help + Enables the support for the BCM Kona mobile timer driver. + config DIGICOLOR_TIMER bool "Digicolor timer driver" if COMPILE_TEST depends on GENERIC_CLOCKEVENTS @@ -141,6 +155,72 @@ config CLKSRC_DBX500_PRCMU help Use the always on PRCMU Timer as clocksource +config CLPS711X_TIMER + bool "Cirrus logic timer driver" if COMPILE_TEST + depends on GENERIC_CLOCKEVENTS + select CLKSRC_MMIO + help + Enables support for the Cirrus Logic PS711 timer. + +config ATLAS7_TIMER + bool "Atlas7 timer driver" if COMPILE_TEST + depends on GENERIC_CLOCKEVENTS + select CLKSRC_MMIO + help + Enables support for the Atlas7 timer. + +config MOXART_TIMER + bool "Moxart timer driver" if COMPILE_TEST + depends on GENERIC_CLOCKEVENTS + select CLKSRC_MMIO + help + Enables support for the Moxart timer. + +config MXS_TIMER + bool "Mxs timer driver" if COMPILE_TEST + depends on GENERIC_CLOCKEVENTS + select CLKSRC_MMIO + select STMP_DEVICE + help + Enables support for the Mxs timer. + +config PRIMA2_TIMER + bool "Prima2 timer driver" if COMPILE_TEST + depends on GENERIC_CLOCKEVENTS + select CLKSRC_MMIO + help + Enables support for the Prima2 timer. + +config U300_TIMER + bool "U300 timer driver" if COMPILE_TEST + depends on GENERIC_CLOCKEVENTS + depends on ARM + select CLKSRC_MMIO + help + Enables support for the U300 timer. + +config NSPIRE_TIMER + bool "NSpire timer driver" if COMPILE_TEST + depends on GENERIC_CLOCKEVENTS + select CLKSRC_MMIO + help + Enables support for the Nspire timer. + +config KEYSTONE_TIMER + bool "Keystone timer driver" if COMPILE_TEST + depends on GENERIC_CLOCKEVENTS + depends on ARM || ARM64 + select CLKSRC_MMIO + help + Enables support for the Keystone timer. + +config INTEGRATOR_AP_TIMER + bool "Integrator-ap timer driver" if COMPILE_TEST + depends on GENERIC_CLOCKEVENTS + select CLKSRC_MMIO + help + Enables support for the Integrator-ap timer. + config CLKSRC_DBX500_PRCMU_SCHED_CLOCK bool "Clocksource PRCMU Timer sched_clock" depends on (CLKSRC_DBX500_PRCMU && !CLKSRC_NOMADIK_MTU_SCHED_CLOCK) @@ -208,14 +288,16 @@ config ARM_ARCH_TIMER select CLKSRC_ACPI if ACPI config ARM_ARCH_TIMER_EVTSTREAM - bool "Support for ARM architected timer event stream generation" + bool "Enable ARM architected timer event stream generation by default" default y if ARM_ARCH_TIMER depends on ARM_ARCH_TIMER help - This option enables support for event stream generation based on - the ARM architected timer. It is used for waking up CPUs executing - the wfe instruction at a frequency represented as a power-of-2 - divisor of the clock rate. + This option enables support by default for event stream generation + based on the ARM architected timer. It is used for waking up CPUs + executing the wfe instruction at a frequency represented as a + power-of-2 divisor of the clock rate. The behaviour can also be + overridden on the command line using the + clocksource.arm_arch_timer.evtstream parameter. The main use of the event stream is wfe-based timeouts of userspace locking implementations. It might also be useful for imposing timeout on wfe to safeguard against any programming errors in case an expected @@ -224,8 +306,9 @@ config ARM_ARCH_TIMER_EVTSTREAM hardware anomalies of missing events. config ARM_GLOBAL_TIMER - bool + bool "Support for the ARM global timer" if COMPILE_TEST select CLKSRC_OF if OF + depends on ARM help This options enables support for the ARM global timer unit @@ -243,7 +326,7 @@ config CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK Use ARM global timer clock source as sched_clock config ARMV7M_SYSTICK - bool + bool "Support for the ARMv7M system time" if COMPILE_TEST select CLKSRC_OF if OF select CLKSRC_MMIO help @@ -254,9 +337,12 @@ config ATMEL_PIT def_bool SOC_AT91SAM9 || SOC_SAMA5 config ATMEL_ST - bool + bool "Atmel ST timer support" if COMPILE_TEST + depends on GENERIC_CLOCKEVENTS select CLKSRC_OF select MFD_SYSCON + help + Support for the Atmel ST timer. config CLKSRC_METAG_GENERIC def_bool y if METAG @@ -270,7 +356,7 @@ config CLKSRC_EXYNOS_MCT Support for Multi Core Timer controller on Exynos SoCs. config CLKSRC_SAMSUNG_PWM - bool "PWM timer drvier for Samsung S3C, S5P" if COMPILE_TEST + bool "PWM timer driver for Samsung S3C, S5P" if COMPILE_TEST depends on GENERIC_CLOCKEVENTS depends on HAS_IOMEM help @@ -293,6 +379,14 @@ config VF_PIT_TIMER help Support for Period Interrupt Timer on Freescale Vybrid Family SoCs. +config OXNAS_RPS_TIMER + bool "Oxford Semiconductor OXNAS RPS Timers driver" if COMPILE_TEST + depends on GENERIC_CLOCKEVENTS + select CLKSRC_OF + select CLKSRC_MMIO + help + This enables support for the Oxford Semiconductor OXNAS RPS timers. + config SYS_SUPPORTS_SH_CMT bool @@ -361,8 +455,8 @@ config CLKSRC_QCOM Qualcomm SoCs. config CLKSRC_VERSATILE - bool "ARM Versatile (Express) reference platforms clock source" - depends on PLAT_VERSATILE && GENERIC_SCHED_CLOCK && !ARCH_USES_GETTIMEOFFSET + bool "ARM Versatile (Express) reference platforms clock source" if COMPILE_TEST + depends on GENERIC_SCHED_CLOCK && !ARCH_USES_GETTIMEOFFSET select CLKSRC_OF default y if MFD_VEXPRESS_SYSREG help diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 473974f9590a..fd9d6df0bbc0 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -19,21 +19,21 @@ obj-$(CONFIG_CLKSRC_NOMADIK_MTU) += nomadik-mtu.o obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o obj-$(CONFIG_ORION_TIMER) += time-orion.o -obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o -obj-$(CONFIG_ARCH_CLPS711X) += clps711x-timer.o -obj-$(CONFIG_ARCH_ATLAS7) += timer-atlas7.o -obj-$(CONFIG_ARCH_MOXART) += moxart_timer.o -obj-$(CONFIG_ARCH_MXS) += mxs_timer.o +obj-$(CONFIG_BCM2835_TIMER) += bcm2835_timer.o +obj-$(CONFIG_CLPS711X_TIMER) += clps711x-timer.o +obj-$(CONFIG_ATLAS7_TIMER) += timer-atlas7.o +obj-$(CONFIG_MOXART_TIMER) += moxart_timer.o +obj-$(CONFIG_MXS_TIMER) += mxs_timer.o obj-$(CONFIG_CLKSRC_PXA) += pxa_timer.o -obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o -obj-$(CONFIG_ARCH_U300) += timer-u300.o +obj-$(CONFIG_PRIMA2_TIMER) += timer-prima2.o +obj-$(CONFIG_U300_TIMER) += timer-u300.o obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o obj-$(CONFIG_SUN5I_HSTIMER) += timer-sun5i.o obj-$(CONFIG_MESON6_TIMER) += meson6_timer.o obj-$(CONFIG_TEGRA_TIMER) += tegra20_timer.o obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o -obj-$(CONFIG_ARCH_NSPIRE) += zevio-timer.o -obj-$(CONFIG_ARCH_BCM_MOBILE) += bcm_kona_timer.o +obj-$(CONFIG_NSPIRE_TIMER) += zevio-timer.o +obj-$(CONFIG_BCM_KONA_TIMER) += bcm_kona_timer.o obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence_ttc_timer.o obj-$(CONFIG_CLKSRC_EFM32) += time-efm32.o obj-$(CONFIG_CLKSRC_STM32) += timer-stm32.o @@ -48,6 +48,7 @@ obj-$(CONFIG_MTK_TIMER) += mtk_timer.o obj-$(CONFIG_CLKSRC_PISTACHIO) += time-pistachio.o obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o obj-$(CONFIG_CLKSRC_NPS) += timer-nps.o +obj-$(CONFIG_OXNAS_RPS_TIMER) += timer-oxnas-rps.o obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o @@ -55,8 +56,8 @@ obj-$(CONFIG_ARMV7M_SYSTICK) += armv7m_systick.o obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp804.o obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST) += dummy_timer.o -obj-$(CONFIG_ARCH_KEYSTONE) += timer-keystone.o -obj-$(CONFIG_ARCH_INTEGRATOR_AP) += timer-integrator-ap.o +obj-$(CONFIG_KEYSTONE_TIMER) += timer-keystone.o +obj-$(CONFIG_INTEGRATOR_AP_TIMER) += timer-integrator-ap.o obj-$(CONFIG_CLKSRC_VERSATILE) += versatile.o obj-$(CONFIG_CLKSRC_MIPS_GIC) += mips-gic-timer.o obj-$(CONFIG_CLKSRC_TANGO_XTAL) += tango_xtal.o diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index 4814446a0024..5effd3027319 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -79,6 +79,14 @@ static enum ppi_nr arch_timer_uses_ppi = VIRT_PPI; static bool arch_timer_c3stop; static bool arch_timer_mem_use_virtual; +static bool evtstrm_enable = IS_ENABLED(CONFIG_ARM_ARCH_TIMER_EVTSTREAM); + +static int __init early_evtstrm_cfg(char *buf) +{ + return strtobool(buf, &evtstrm_enable); +} +early_param("clocksource.arm_arch_timer.evtstrm", early_evtstrm_cfg); + /* * Architected system timer support. */ @@ -372,7 +380,7 @@ static int arch_timer_setup(struct clock_event_device *clk) enable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI], 0); arch_counter_set_user_access(); - if (IS_ENABLED(CONFIG_ARM_ARCH_TIMER_EVTSTREAM)) + if (evtstrm_enable) arch_timer_configure_evtstream(); return 0; @@ -693,25 +701,26 @@ arch_timer_needs_probing(int type, const struct of_device_id *matches) return needs_probing; } -static void __init arch_timer_common_init(void) +static int __init arch_timer_common_init(void) { unsigned mask = ARCH_CP15_TIMER | ARCH_MEM_TIMER; /* Wait until both nodes are probed if we have two timers */ if ((arch_timers_present & mask) != mask) { if (arch_timer_needs_probing(ARCH_MEM_TIMER, arch_timer_mem_of_match)) - return; + return 0; if (arch_timer_needs_probing(ARCH_CP15_TIMER, arch_timer_of_match)) - return; + return 0; } arch_timer_banner(arch_timers_present); arch_counter_register(arch_timers_present); - arch_timer_arch_init(); + return arch_timer_arch_init(); } -static void __init arch_timer_init(void) +static int __init arch_timer_init(void) { + int ret; /* * If HYP mode is available, we know that the physical timer * has been configured to be accessible from PL1. Use it, so @@ -739,23 +748,30 @@ static void __init arch_timer_init(void) if (!has_ppi) { pr_warn("arch_timer: No interrupt available, giving up\n"); - return; + return -EINVAL; } } - arch_timer_register(); - arch_timer_common_init(); + ret = arch_timer_register(); + if (ret) + return ret; + + ret = arch_timer_common_init(); + if (ret) + return ret; arch_timer_kvm_info.virtual_irq = arch_timer_ppi[VIRT_PPI]; + + return 0; } -static void __init arch_timer_of_init(struct device_node *np) +static int __init arch_timer_of_init(struct device_node *np) { int i; if (arch_timers_present & ARCH_CP15_TIMER) { pr_warn("arch_timer: multiple nodes in dt, skipping\n"); - return; + return 0; } arch_timers_present |= ARCH_CP15_TIMER; @@ -774,23 +790,23 @@ static void __init arch_timer_of_init(struct device_node *np) of_property_read_bool(np, "arm,cpu-registers-not-fw-configured")) arch_timer_uses_ppi = PHYS_SECURE_PPI; - arch_timer_init(); + return arch_timer_init(); } CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_of_init); CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_of_init); -static void __init arch_timer_mem_init(struct device_node *np) +static int __init arch_timer_mem_init(struct device_node *np) { struct device_node *frame, *best_frame = NULL; void __iomem *cntctlbase, *base; - unsigned int irq; + unsigned int irq, ret = -EINVAL; u32 cnttidr; arch_timers_present |= ARCH_MEM_TIMER; cntctlbase = of_iomap(np, 0); if (!cntctlbase) { pr_err("arch_timer: Can't find CNTCTLBase\n"); - return; + return -ENXIO; } cnttidr = readl_relaxed(cntctlbase + CNTTIDR); @@ -830,6 +846,7 @@ static void __init arch_timer_mem_init(struct device_node *np) best_frame = of_node_get(frame); } + ret= -ENXIO; base = arch_counter_base = of_iomap(best_frame, 0); if (!base) { pr_err("arch_timer: Can't map frame's registers\n"); @@ -841,6 +858,7 @@ static void __init arch_timer_mem_init(struct device_node *np) else irq = irq_of_parse_and_map(best_frame, 0); + ret = -EINVAL; if (!irq) { pr_err("arch_timer: Frame missing %s irq", arch_timer_mem_use_virtual ? "virt" : "phys"); @@ -848,11 +866,15 @@ static void __init arch_timer_mem_init(struct device_node *np) } arch_timer_detect_rate(base, np); - arch_timer_mem_register(base, irq); - arch_timer_common_init(); + ret = arch_timer_mem_register(base, irq); + if (ret) + goto out; + + return arch_timer_common_init(); out: iounmap(cntctlbase); of_node_put(best_frame); + return ret; } CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem", arch_timer_mem_init); diff --git a/drivers/clocksource/arm_global_timer.c b/drivers/clocksource/arm_global_timer.c index 9df0d1699d22..2a9ceb6e93f9 100644 --- a/drivers/clocksource/arm_global_timer.c +++ b/drivers/clocksource/arm_global_timer.c @@ -238,7 +238,7 @@ static void __init gt_delay_timer_init(void) register_current_timer_delay(>_delay_timer); } -static void __init gt_clocksource_init(void) +static int __init gt_clocksource_init(void) { writel(0, gt_base + GT_CONTROL); writel(0, gt_base + GT_COUNTER0); @@ -249,7 +249,7 @@ static void __init gt_clocksource_init(void) #ifdef CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK sched_clock_register(gt_sched_clock_read, 64, gt_clk_rate); #endif - clocksource_register_hz(>_clocksource, gt_clk_rate); + return clocksource_register_hz(>_clocksource, gt_clk_rate); } static int gt_cpu_notify(struct notifier_block *self, unsigned long action, @@ -270,7 +270,7 @@ static struct notifier_block gt_cpu_nb = { .notifier_call = gt_cpu_notify, }; -static void __init global_timer_of_register(struct device_node *np) +static int __init global_timer_of_register(struct device_node *np) { struct clk *gt_clk; int err = 0; @@ -283,19 +283,19 @@ static void __init global_timer_of_register(struct device_node *np) if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9 && (read_cpuid_id() & 0xf0000f) < 0x200000) { pr_warn("global-timer: non support for this cpu version.\n"); - return; + return -ENOSYS; } gt_ppi = irq_of_parse_and_map(np, 0); if (!gt_ppi) { pr_warn("global-timer: unable to parse irq\n"); - return; + return -EINVAL; } gt_base = of_iomap(np, 0); if (!gt_base) { pr_warn("global-timer: invalid base address\n"); - return; + return -ENXIO; } gt_clk = of_clk_get(np, 0); @@ -332,11 +332,17 @@ static void __init global_timer_of_register(struct device_node *np) } /* Immediately configure the timer on the boot CPU */ - gt_clocksource_init(); - gt_clockevents_init(this_cpu_ptr(gt_evt)); + err = gt_clocksource_init(); + if (err) + goto out_irq; + + err = gt_clockevents_init(this_cpu_ptr(gt_evt)); + if (err) + goto out_irq; + gt_delay_timer_init(); - return; + return 0; out_irq: free_percpu_irq(gt_ppi, gt_evt); @@ -347,6 +353,8 @@ out_clk: out_unmap: iounmap(gt_base); WARN(err, "ARM Global timer register failed (%d)\n", err); + + return err; } /* Only tested on r2p2 and r3p0 */ diff --git a/drivers/clocksource/armv7m_systick.c b/drivers/clocksource/armv7m_systick.c index addfd2c64f54..a315491b7047 100644 --- a/drivers/clocksource/armv7m_systick.c +++ b/drivers/clocksource/armv7m_systick.c @@ -7,6 +7,7 @@ #include <linux/kernel.h> #include <linux/clocksource.h> #include <linux/clockchips.h> +#include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/clk.h> @@ -21,7 +22,7 @@ |