diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/iio/accel/st_accel_core.c | 4 | ||||
-rw-r--r-- | drivers/iio/accel/st_accel_spi.c | 4 | ||||
-rw-r--r-- | drivers/iio/common/st_sensors/st_sensors_core.c | 64 | ||||
-rw-r--r-- | drivers/iio/common/st_sensors/st_sensors_spi.c | 65 | ||||
-rw-r--r-- | drivers/iio/gyro/st_gyro_core.c | 4 | ||||
-rw-r--r-- | drivers/iio/gyro/st_gyro_spi.c | 4 | ||||
-rw-r--r-- | drivers/iio/magnetometer/st_magn_core.c | 4 | ||||
-rw-r--r-- | drivers/iio/magnetometer/st_magn_spi.c | 4 | ||||
-rw-r--r-- | drivers/iio/pressure/st_pressure_core.c | 4 | ||||
-rw-r--r-- | drivers/iio/pressure/st_pressure_spi.c | 4 |
10 files changed, 94 insertions, 67 deletions
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index 6fc490ffef7e..630909702a19 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -1183,9 +1183,7 @@ int st_accel_common_probe(struct iio_dev *indio_dev) if (err) return err; - err = st_sensors_check_device_support(indio_dev, - ARRAY_SIZE(st_accel_sensors_settings), - st_accel_sensors_settings); + err = st_sensors_verify_id(indio_dev); if (err < 0) goto st_accel_power_off; diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c index c0556db9d60a..8af7027d5598 100644 --- a/drivers/iio/accel/st_accel_spi.c +++ b/drivers/iio/accel/st_accel_spi.c @@ -124,7 +124,9 @@ static int st_accel_spi_probe(struct spi_device *spi) adata = iio_priv(indio_dev); adata->sensor_settings = (struct st_sensor_settings *)settings; - st_sensors_spi_configure(indio_dev, spi, adata); + err = st_sensors_spi_configure(indio_dev, spi); + if (err < 0) + return err; err = st_accel_common_probe(indio_dev); if (err < 0) diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index 3610ca9eaa87..f05bf7cf0594 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -608,31 +608,6 @@ out: } EXPORT_SYMBOL(st_sensors_read_info_raw); -static int st_sensors_init_interface_mode(struct iio_dev *indio_dev, - const struct st_sensor_settings *sensor_settings) -{ - struct st_sensor_data *sdata = iio_priv(indio_dev); - struct device_node *np = sdata->dev->of_node; - struct st_sensors_platform_data *pdata; - - pdata = (struct st_sensors_platform_data *)sdata->dev->platform_data; - if (((np && of_property_read_bool(np, "spi-3wire")) || - (pdata && pdata->spi_3wire)) && sensor_settings->sim.addr) { - int err; - - err = sdata->tf->write_byte(&sdata->tb, sdata->dev, - sensor_settings->sim.addr, - sensor_settings->sim.value); - if (err < 0) { - dev_err(&indio_dev->dev, - "failed to init interface mode\n"); - return err; - } - } - - return 0; -} - /* * st_sensors_get_settings_index() - get index of the sensor settings for a * specific device from list of settings @@ -660,36 +635,30 @@ int st_sensors_get_settings_index(const char *name, } EXPORT_SYMBOL(st_sensors_get_settings_index); -int st_sensors_check_device_support(struct iio_dev *indio_dev, - int num_sensors_list, - const struct st_sensor_settings *sensor_settings) +/* + * st_sensors_verify_id() - verify sensor ID (WhoAmI) is matching with the + * expected value + * @indio_dev: IIO device reference. + * + * Return: 0 on success (valid sensor ID), else a negative error code. + */ +int st_sensors_verify_id(struct iio_dev *indio_dev) { struct st_sensor_data *sdata = iio_priv(indio_dev); - int i, err; + int err; u8 wai; - i = st_sensors_get_settings_index(indio_dev->name, - sensor_settings, num_sensors_list); - if (i < 0) { - dev_err(&indio_dev->dev, "device name %s not recognized.\n", - indio_dev->name); - return i; - } - - err = st_sensors_init_interface_mode(indio_dev, &sensor_settings[i]); - if (err < 0) - return err; - - if (sensor_settings[i].wai_addr) { + if (sdata->sensor_settings->wai_addr) { err = sdata->tf->read_byte(&sdata->tb, sdata->dev, - sensor_settings[i].wai_addr, &wai); + sdata->sensor_settings->wai_addr, + &wai); if (err < 0) { dev_err(&indio_dev->dev, "failed to read Who-Am-I register.\n"); return err; } - if (sensor_settings[i].wai != wai) { + if (sdata->sensor_settings->wai != wai) { dev_err(&indio_dev->dev, "%s: WhoAmI mismatch (0x%x).\n", indio_dev->name, wai); @@ -697,12 +666,9 @@ int st_sensors_check_device_support(struct iio_dev *indio_dev, } } - sdata->sensor_settings = - (struct st_sensor_settings *)&sensor_settings[i]; - - return i; + return 0; } -EXPORT_SYMBOL(st_sensors_check_device_support); +EXPORT_SYMBOL(st_sensors_verify_id); ssize_t st_sensors_sysfs_sampling_frequency_avail(struct device *dev, struct device_attribute *attr, char *buf) diff --git a/drivers/iio/common/st_sensors/st_sensors_spi.c b/drivers/iio/common/st_sensors/st_sensors_spi.c index 2213843f02cb..a57cd648975c 100644 --- a/drivers/iio/common/st_sensors/st_sensors_spi.c +++ b/drivers/iio/common/st_sensors/st_sensors_spi.c @@ -102,9 +102,68 @@ static const struct st_sensor_transfer_function st_sensors_tf_spi = { .read_multiple_byte = st_sensors_spi_read_multiple_byte, }; -void st_sensors_spi_configure(struct iio_dev *indio_dev, - struct spi_device *spi, struct st_sensor_data *sdata) +/* + * st_sensors_is_spi_3_wire() - check if SPI 3-wire mode has been selected + * @spi: spi device reference. + * + * Return: true if SPI 3-wire mode is selected, false otherwise. + */ +static bool st_sensors_is_spi_3_wire(struct spi_device *spi) +{ + struct device_node *np = spi->dev.of_node; + struct st_sensors_platform_data *pdata; + + pdata = (struct st_sensors_platform_data *)spi->dev.platform_data; + if ((np && of_property_read_bool(np, "spi-3wire")) || + (pdata && pdata->spi_3wire)) { + return true; + } + + return false; +} + +/* + * st_sensors_configure_spi_3_wire() - configure SPI 3-wire if needed + * @spi: spi device reference. + * @settings: sensor specific settings reference. + * + * Return: 0 on success, else a negative error code. + */ +static int st_sensors_configure_spi_3_wire(struct spi_device *spi, + struct st_sensor_settings *settings) +{ + if (settings->sim.addr) { + u8 buffer[] = { + settings->sim.addr, + settings->sim.value + }; + + return spi_write(spi, buffer, 2); + } + + return 0; +} + +/* + * st_sensors_spi_configure() - configure SPI interface + * @indio_dev: IIO device reference. + * @spi: spi device reference. + * + * Return: 0 on success, else a negative error code. + */ +int st_sensors_spi_configure(struct iio_dev *indio_dev, + struct spi_device *spi) { + struct st_sensor_data *sdata = iio_priv(indio_dev); + int err; + + if (st_sensors_is_spi_3_wire(spi)) { + err = st_sensors_configure_spi_3_wire(spi, + sdata->sensor_settings); + if (err < 0) + return err; + } + spi_set_drvdata(spi, indio_dev); indio_dev->dev.parent = &spi->dev; @@ -113,6 +172,8 @@ void st_sensors_spi_configure(struct iio_dev *indio_dev, sdata->dev = &spi->dev; sdata->tf = &st_sensors_tf_spi; sdata->get_irq_data_ready = st_sensors_spi_get_irq; + + return 0; } EXPORT_SYMBOL(st_sensors_spi_configure); diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c index 5cc63d41d855..4b87e79aa744 100644 --- a/drivers/iio/gyro/st_gyro_core.c +++ b/drivers/iio/gyro/st_gyro_core.c @@ -400,9 +400,7 @@ int st_gyro_common_probe(struct iio_dev *indio_dev) if (err) return err; - err = st_sensors_check_device_support(indio_dev, - ARRAY_SIZE(st_gyro_sensors_settings), - st_gyro_sensors_settings); + err = st_sensors_verify_id(indio_dev); if (err < 0) goto st_gyro_power_off; diff --git a/drivers/iio/gyro/st_gyro_spi.c b/drivers/iio/gyro/st_gyro_spi.c index bb7082055f85..b5c624251231 100644 --- a/drivers/iio/gyro/st_gyro_spi.c +++ b/drivers/iio/gyro/st_gyro_spi.c @@ -91,7 +91,9 @@ static int st_gyro_spi_probe(struct spi_device *spi) gdata = iio_priv(indio_dev); gdata->sensor_settings = (struct st_sensor_settings *)settings; - st_sensors_spi_configure(indio_dev, spi, gdata); + err = st_sensors_spi_configure(indio_dev, spi); + if (err < 0) + return err; err = st_gyro_common_probe(indio_dev); if (err < 0) diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c index 43a49a52c81a..3f313aefece6 100644 --- a/drivers/iio/magnetometer/st_magn_core.c +++ b/drivers/iio/magnetometer/st_magn_core.c @@ -502,9 +502,7 @@ int st_magn_common_probe(struct iio_dev *indio_dev) if (err) return err; - err = st_sensors_check_device_support(indio_dev, - ARRAY_SIZE(st_magn_sensors_settings), - st_magn_sensors_settings); + err = st_sensors_verify_id(indio_dev); if (err < 0) goto st_magn_power_off; diff --git a/drivers/iio/magnetometer/st_magn_spi.c b/drivers/iio/magnetometer/st_magn_spi.c index a3045afc6b53..fbf909bde841 100644 --- a/drivers/iio/magnetometer/st_magn_spi.c +++ b/drivers/iio/magnetometer/st_magn_spi.c @@ -73,7 +73,9 @@ static int st_magn_spi_probe(struct spi_device *spi) mdata = iio_priv(indio_dev); mdata->sensor_settings = (struct st_sensor_settings *)settings; - st_sensors_spi_configure(indio_dev, spi, mdata); + err = st_sensors_spi_configure(indio_dev, spi); + if (err < 0) + return err; err = st_magn_common_probe(indio_dev); if (err < 0) diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index 35d80ff27464..a783fc075c26 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -698,9 +698,7 @@ int st_press_common_probe(struct iio_dev *indio_dev) if (err) return err; - err = st_sensors_check_device_support(indio_dev, - ARRAY_SIZE(st_press_sensors_settings), - st_press_sensors_settings); + err = st_sensors_verify_id(indio_dev); if (err < 0) goto st_press_power_off; diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c index 3e8c1ffe001e..7c8b70221e70 100644 --- a/drivers/iio/pressure/st_pressure_spi.c +++ b/drivers/iio/pressure/st_pressure_spi.c @@ -83,7 +83,9 @@ static int st_press_spi_probe(struct spi_device *spi) press_data = iio_priv(indio_dev); press_data->sensor_settings = (struct st_sensor_settings *)settings; - st_sensors_spi_configure(indio_dev, spi, press_data); + err = st_sensors_spi_configure(indio_dev, spi); + if (err < 0) + return err; err = st_press_common_probe(indio_dev); if (err < 0) |