diff options
Diffstat (limited to 'drivers')
90 files changed, 837 insertions, 529 deletions
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index 753e171de006..5909e8fa4013 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -159,26 +159,34 @@ void acpi_processor_ignore_ppc_init(void) void acpi_processor_ppc_init(struct cpufreq_policy *policy) { - int cpu = policy->cpu; - struct acpi_processor *pr = per_cpu(processors, cpu); - int ret; + unsigned int cpu; - if (!pr) - return; + for_each_cpu(cpu, policy->related_cpus) { + struct acpi_processor *pr = per_cpu(processors, cpu); + int ret; + + if (!pr) + continue; - ret = freq_qos_add_request(&policy->constraints, &pr->perflib_req, - FREQ_QOS_MAX, INT_MAX); - if (ret < 0) - pr_err("Failed to add freq constraint for CPU%d (%d)\n", cpu, - ret); + ret = freq_qos_add_request(&policy->constraints, + &pr->perflib_req, + FREQ_QOS_MAX, INT_MAX); + if (ret < 0) + pr_err("Failed to add freq constraint for CPU%d (%d)\n", + cpu, ret); + } } void acpi_processor_ppc_exit(struct cpufreq_policy *policy) { - struct acpi_processor *pr = per_cpu(processors, policy->cpu); + unsigned int cpu; - if (pr) - freq_qos_remove_request(&pr->perflib_req); + for_each_cpu(cpu, policy->related_cpus) { + struct acpi_processor *pr = per_cpu(processors, cpu); + + if (pr) + freq_qos_remove_request(&pr->perflib_req); + } } static int acpi_processor_get_performance_control(struct acpi_processor *pr) diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c index c77a5b1fb107..41feb88ee92d 100644 --- a/drivers/acpi/processor_thermal.c +++ b/drivers/acpi/processor_thermal.c @@ -127,26 +127,34 @@ static int cpufreq_set_cur_state(unsigned int cpu, int state) void acpi_thermal_cpufreq_init(struct cpufreq_policy *policy) { - int cpu = policy->cpu; - struct acpi_processor *pr = per_cpu(processors, cpu); - int ret; + unsigned int cpu; - if (!pr) - return; + for_each_cpu(cpu, policy->related_cpus) { + struct acpi_processor *pr = per_cpu(processors, cpu); + int ret; + + if (!pr) + continue; - ret = freq_qos_add_request(&policy->constraints, &pr->thermal_req, - FREQ_QOS_MAX, INT_MAX); - if (ret < 0) - pr_err("Failed to add freq constraint for CPU%d (%d)\n", cpu, - ret); + ret = freq_qos_add_request(&policy->constraints, + &pr->thermal_req, + FREQ_QOS_MAX, INT_MAX); + if (ret < 0) + pr_err("Failed to add freq constraint for CPU%d (%d)\n", + cpu, ret); + } } void acpi_thermal_cpufreq_exit(struct cpufreq_policy *policy) { - struct acpi_processor *pr = per_cpu(processors, policy->cpu); + unsigned int cpu; + + for_each_cpu(cpu, policy->related_cpus) { + struct acpi_processor *pr = per_cpu(processors, policy->cpu); - if (pr) - freq_qos_remove_request(&pr->thermal_req); + if (pr) + freq_qos_remove_request(&pr->thermal_req); + } } #else /* ! CONFIG_CPU_FREQ */ static int cpufreq_get_max_state(unsigned int cpu) diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 9ba74ab7e912..c27e206a764c 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -1707,6 +1707,14 @@ static void sdma_add_scripts(struct sdma_engine *sdma, if (!sdma->script_number) sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1; + if (sdma->script_number > sizeof(struct sdma_script_start_addrs) + / sizeof(s32)) { + dev_err(sdma->dev, + "SDMA script number %d not match with firmware.\n", + sdma->script_number); + return; + } + for (i = 0; i < sdma->script_number; i++) if (addr_arr[i] > 0) saddr_arr[i] = addr_arr[i]; diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c index 8e90a405939d..ef73f65224b1 100644 --- a/drivers/dma/qcom/bam_dma.c +++ b/drivers/dma/qcom/bam_dma.c @@ -694,6 +694,25 @@ static int bam_dma_terminate_all(struct dma_chan *chan) /* remove all transactions, including active transaction */ spin_lock_irqsave(&bchan->vc.lock, flag); + /* + * If we have transactions queued, then some might be committed to the + * hardware in the desc fifo. The only way to reset the desc fifo is + * to do a hardware reset (either by pipe or the entire block). + * bam_chan_init_hw() will trigger a pipe reset, and also reinit the + * pipe. If the pipe is left disabled (default state after pipe reset) + * and is accessed by a connected hardware engine, a fatal error in + * the BAM will occur. There is a small window where this could happen + * with bam_chan_init_hw(), but it is assumed that the caller has + * stopped activity on any attached hardware engine. Make sure to do + * this first so that the BAM hardware doesn't cause memory corruption + * by accessing freed resources. + */ + if (!list_empty(&bchan->desc_list)) { + async_desc = list_first_entry(&bchan->desc_list, + struct bam_async_desc, desc_node); + bam_chan_init_hw(bchan, async_desc->dir); + } + list_for_each_entry_safe(async_desc, tmp, &bchan->desc_list, desc_node) { list_add(&async_desc->vd.node, &bchan->vc.desc_issued); diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c index 525dc7338fe3..8546ad034720 100644 --- a/drivers/dma/sprd-dma.c +++ b/drivers/dma/sprd-dma.c @@ -134,6 +134,10 @@ #define SPRD_DMA_SRC_TRSF_STEP_OFFSET 0 #define SPRD_DMA_TRSF_STEP_MASK GENMASK(15, 0) +/* SPRD DMA_SRC_BLK_STEP register definition */ +#define SPRD_DMA_LLIST_HIGH_MASK GENMASK(31, 28) +#define SPRD_DMA_LLIST_HIGH_SHIFT 28 + /* define DMA channel mode & trigger mode mask */ #define SPRD_DMA_CHN_MODE_MASK GENMASK(7, 0) #define SPRD_DMA_TRG_MODE_MASK GENMASK(7, 0) @@ -208,6 +212,7 @@ struct sprd_dma_dev { struct sprd_dma_chn channels[0]; }; +static void sprd_dma_free_desc(struct virt_dma_desc *vd); static bool sprd_dma_filter_fn(struct dma_chan *chan, void *param); static struct of_dma_filter_info sprd_dma_info = { .filter_fn = sprd_dma_filter_fn, @@ -609,12 +614,19 @@ static int sprd_dma_alloc_chan_resources(struct dma_chan *chan) static void sprd_dma_free_chan_resources(struct dma_chan *chan) { struct sprd_dma_chn *schan = to_sprd_dma_chan(chan); + struct virt_dma_desc *cur_vd = NULL; unsigned long flags; spin_lock_irqsave(&schan->vc.lock, flags); + if (schan->cur_desc) + cur_vd = &schan->cur_desc->vd; + sprd_dma_stop(schan); spin_unlock_irqrestore(&schan->vc.lock, flags); + if (cur_vd) + sprd_dma_free_desc(cur_vd); + vchan_free_chan_resources(&schan->vc); pm_runtime_put(chan->device->dev); } @@ -717,6 +729,7 @@ static int sprd_dma_fill_desc(struct dma_chan *chan, u32 int_mode = flags & SPRD_DMA_INT_MASK; int src_datawidth, dst_datawidth, src_step, dst_step; u32 temp, fix_mode = 0, fix_en = 0; + phys_addr_t llist_ptr; if (dir == DMA_MEM_TO_DEV) { src_step = sprd_dma_get_step(slave_cfg->src_addr_width); @@ -814,13 +827,16 @@ static int sprd_dma_fill_desc(struct dma_chan *chan, * Set the link-list pointer point to next link-list * configuration's physical address. */ - hw->llist_ptr = schan->linklist.phy_addr + temp; + llist_ptr = schan->linklist.phy_addr + temp; + hw->llist_ptr = lower_32_bits(llist_ptr); + hw->src_blk_step = (upper_32_bits(llist_ptr) << SPRD_DMA_LLIST_HIGH_SHIFT) & + SPRD_DMA_LLIST_HIGH_MASK; } else { hw->llist_ptr = 0; + hw->src_blk_step = 0; } hw->frg_step = 0; - hw->src_blk_step = 0; hw->des_blk_step = 0; return 0; } @@ -1023,15 +1039,22 @@ static int sprd_dma_resume(struct dma_chan *chan) static int sprd_dma_terminate_all(struct dma_chan *chan) { struct sprd_dma_chn *schan = to_sprd_dma_chan(chan); + struct virt_dma_desc *cur_vd = NULL; unsigned long flags; LIST_HEAD(head); spin_lock_irqsave(&schan->vc.lock, flags); + if (schan->cur_desc) + cur_vd = &schan->cur_desc->vd; + sprd_dma_stop(schan); vchan_get_all_descriptors(&schan->vc, &head); spin_unlock_irqrestore(&schan->vc.lock, flags); + if (cur_vd) + sprd_dma_free_desc(cur_vd); + vchan_dma_desc_free_list(&schan->vc, &head); return 0; } diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c index 5f8adf5c1f20..6e1268552f74 100644 --- a/drivers/dma/tegra210-adma.c +++ b/drivers/dma/tegra210-adma.c @@ -40,6 +40,7 @@ #define ADMA_CH_CONFIG_MAX_BURST_SIZE 16 #define ADMA_CH_CONFIG_WEIGHT_FOR_WRR(val) ((val) & 0xf) #define ADMA_CH_CONFIG_MAX_BUFS 8 +#define TEGRA186_ADMA_CH_CONFIG_OUTSTANDING_REQS(reqs) (reqs << 4) |