diff options
Diffstat (limited to 'drivers/usb/serial/cp210x.c')
-rw-r--r-- | drivers/usb/serial/cp210x.c | 189 |
1 files changed, 186 insertions, 3 deletions
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index c01c7863dd1a..02e4acb2823b 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -50,6 +50,9 @@ static void cp210x_release(struct usb_serial *); static int cp210x_port_probe(struct usb_serial_port *); static int cp210x_port_remove(struct usb_serial_port *); static void cp210x_dtr_rts(struct usb_serial_port *p, int on); +static void cp210x_process_read_urb(struct urb *urb); +static void cp210x_enable_event_mode(struct usb_serial_port *port); +static void cp210x_disable_event_mode(struct usb_serial_port *port); static const struct usb_device_id id_table[] = { { USB_DEVICE(0x045B, 0x0053) }, /* Renesas RX610 RX-Stick */ @@ -253,9 +256,21 @@ struct cp210x_serial_private { bool use_actual_rate; }; +enum cp210x_event_state { + ES_DATA, + ES_ESCAPE, + ES_LSR, + ES_LSR_DATA_0, + ES_LSR_DATA_1, + ES_MSR +}; + struct cp210x_port_private { __u8 bInterfaceNumber; bool has_swapped_line_ctl; + bool event_mode; + enum cp210x_event_state event_state; + u8 lsr; }; static struct usb_serial_driver cp210x_device = { @@ -281,7 +296,8 @@ static struct usb_serial_driver cp210x_device = { .release = cp210x_release, .port_probe = cp210x_port_probe, .port_remove = cp210x_port_remove, - .dtr_rts = cp210x_dtr_rts + .dtr_rts = cp210x_dtr_rts, + .process_read_urb = cp210x_process_read_urb, }; static struct usb_serial_driver * const serial_drivers[] = { @@ -403,6 +419,15 @@ struct cp210x_comm_status { */ #define PURGE_ALL 0x000f +/* CP210X_EMBED_EVENTS */ +#define CP210X_ESCCHAR 0xec + +#define CP210X_LSR_OVERRUN BIT(1) +#define CP210X_LSR_PARITY BIT(2) +#define CP210X_LSR_FRAME BIT(3) +#define CP210X_LSR_BREAK BIT(4) + + /* CP210X_GET_FLOW/CP210X_SET_FLOW read/write these 0x10 bytes */ struct cp210x_flow_ctl { __le32 ulControlHandshake; @@ -809,6 +834,7 @@ static int cp210x_get_line_ctl(struct usb_serial_port *port, u16 *ctl) static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port) { + struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); int result; result = cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_ENABLE); @@ -820,10 +846,14 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port) /* Configure the termios structure */ cp210x_get_termios(tty, port); - /* The baud rate must be initialised on cp2104 */ - if (tty) + if (tty) { + /* The baud rate must be initialised on cp2104 */ cp210x_change_speed(tty, port, NULL); + if (I_INPCK(tty)) + cp210x_enable_event_mode(port); + } + result = usb_serial_generic_open(tty, port); if (result) goto err_disable; @@ -832,18 +862,128 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port) err_disable: cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_DISABLE); + port_priv->event_mode = false; return result; } static void cp210x_close(struct usb_serial_port *port) { + struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); + usb_serial_generic_close(port); /* Clear both queues; cp2108 needs this to avoid an occasional hang */ cp210x_write_u16_reg(port, CP210X_PURGE, PURGE_ALL); cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_DISABLE); + + /* Disabling the interface disables event-insertion mode. */ + port_priv->event_mode = false; +} + +static void cp210x_process_lsr(struct usb_serial_port *port, unsigned char lsr, char *flag) +{ + if (lsr & CP210X_LSR_BREAK) { + port->icount.brk++; + *flag = TTY_BREAK; + } else if (lsr & CP210X_LSR_PARITY) { + port->icount.parity++; + *flag = TTY_PARITY; + } else if (lsr & CP210X_LSR_FRAME) { + port->icount.frame++; + *flag = TTY_FRAME; + } + + if (lsr & CP210X_LSR_OVERRUN) { + port->icount.overrun++; + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); + } +} + +static bool cp210x_process_char(struct usb_serial_port *port, unsigned char *ch, char *flag) +{ + struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); + + switch (port_priv->event_state) { + case ES_DATA: + if (*ch == CP210X_ESCCHAR) { + port_priv->event_state = ES_ESCAPE; + break; + } + return false; + case ES_ESCAPE: + switch (*ch) { + case 0: + dev_dbg(&port->dev, "%s - escape char\n", __func__); + *ch = CP210X_ESCCHAR; + port_priv->event_state = ES_DATA; + return false; + case 1: + port_priv->event_state = ES_LSR_DATA_0; + break; + case 2: + port_priv->event_state = ES_LSR; + break; + case 3: + port_priv->event_state = ES_MSR; + break; + default: + dev_err(&port->dev, "malformed event 0x%02x\n", *ch); + port_priv->event_state = ES_DATA; + break; + } + break; + case ES_LSR_DATA_0: + port_priv->lsr = *ch; + port_priv->event_state = ES_LSR_DATA_1; + break; + case ES_LSR_DATA_1: + dev_dbg(&port->dev, "%s - lsr = 0x%02x, data = 0x%02x\n", + __func__, port_priv->lsr, *ch); + cp210x_process_lsr(port, port_priv->lsr, flag); + port_priv->event_state = ES_DATA; + return false; + case ES_LSR: + dev_dbg(&port->dev, "%s - lsr = 0x%02x\n", __func__, *ch); + port_priv->lsr = *ch; + cp210x_process_lsr(port, port_priv->lsr, flag); + port_priv->event_state = ES_DATA; + break; + case ES_MSR: + dev_dbg(&port->dev, "%s - msr = 0x%02x\n", __func__, *ch); + /* unimplemented */ + port_priv->event_state = ES_DATA; + break; + } + + return true; +} + +static void cp210x_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); + unsigned char *ch = urb->transfer_buffer; + char flag; + int i; + + if (!urb->actual_length) + return; + + if (port_priv->event_mode) { + for (i = 0; i < urb->actual_length; i++, ch++) { + flag = TTY_NORMAL; + + if (cp210x_process_char(port, ch, &flag)) + continue; + + tty_insert_flip_char(&port->port, *ch, flag); + } + } else { + tty_insert_flip_string(&port->port, ch, urb->actual_length); + } + tty_flip_buffer_push(&port->port); } /* @@ -1176,6 +1316,41 @@ static void cp210x_change_speed(struct tty_struct *tty, tty_encode_baud_rate(tty, baud, baud); } +static void cp210x_enable_event_mode(struct usb_serial_port *port) +{ + struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); + int ret; + + if (port_priv->event_mode) + return; + + port_priv->event_state = ES_DATA; + port_priv->event_mode = true; + + ret = cp210x_write_u16_reg(port, CP210X_EMBED_EVENTS, CP210X_ESCCHAR); + if (ret) { + dev_err(&port->dev, "failed to enable events: %d\n", ret); + port_priv->event_mode = false; + } +} + +static void cp210x_disable_event_mode(struct usb_serial_port *port) +{ + struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); + int ret; + + if (!port_priv->event_mode) + return; + + ret = cp210x_write_u16_reg(port, CP210X_EMBED_EVENTS, 0); + if (ret) { + dev_err(&port->dev, "failed to disable events: %d\n", ret); + return; + } + + port_priv->event_mode = false; +} + static void cp210x_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { @@ -1298,6 +1473,14 @@ static void cp210x_set_termios(struct tty_struct *tty, sizeof(flow_ctl)); } + /* + * Enable event-insertion mode only if input parity checking is + * enabled for now. + */ + if (I_INPCK(tty)) + cp210x_enable_event_mode(port); + else + cp210x_disable_event_mode(port); } static int cp210x_tiocmset(struct tty_struct *tty, |