diff options
Diffstat (limited to 'drivers/usb/mtu3')
-rw-r--r-- | drivers/usb/mtu3/Kconfig | 32 | ||||
-rw-r--r-- | drivers/usb/mtu3/Makefile | 2 | ||||
-rw-r--r-- | drivers/usb/mtu3/mtu3.h | 341 | ||||
-rw-r--r-- | drivers/usb/mtu3/mtu3_core.c | 675 | ||||
-rw-r--r-- | drivers/usb/mtu3/mtu3_gadget.c | 709 | ||||
-rw-r--r-- | drivers/usb/mtu3/mtu3_gadget_ep0.c | 791 | ||||
-rw-r--r-- | drivers/usb/mtu3/mtu3_hw_regs.h | 440 | ||||
-rw-r--r-- | drivers/usb/mtu3/mtu3_plat.c | 251 | ||||
-rw-r--r-- | drivers/usb/mtu3/mtu3_qmu.c | 573 | ||||
-rw-r--r-- | drivers/usb/mtu3/mtu3_qmu.h | 43 |
10 files changed, 3857 insertions, 0 deletions
diff --git a/drivers/usb/mtu3/Kconfig b/drivers/usb/mtu3/Kconfig new file mode 100644 index 000000000000..54dadee36f4d --- /dev/null +++ b/drivers/usb/mtu3/Kconfig @@ -0,0 +1,32 @@ +# For MTK USB3.0 IP + +config USB_MTU3 + tristate "MediaTek USB3 Dual Role controller" + depends on (USB || USB_GADGET) && HAS_DMA + depends on ARCH_MEDIATEK || COMPILE_TEST + help + Say Y or M here if your system runs on MediaTek SoCs with + Dual Role SuperSpeed USB controller. You can select usb + mode as peripheral role or host role, or both. + + If you don't know what this is, please say N. + + Choose M here to compile this driver as a module, and it + will be called mtu3.ko. + + +if USB_MTU3 +choice + bool "MTU3 Mode Selection" + default USB_MTU3_GADGET if (!USB && USB_GADGET) + +config USB_MTU3_GADGET + bool "Gadget only mode" + depends on USB_GADGET=y || USB_GADGET=USB_MTU3 + help + Select this when you want to use MTU3 in gadget mode only, + thereby the host feature will be regressed. + +endchoice + +endif diff --git a/drivers/usb/mtu3/Makefile b/drivers/usb/mtu3/Makefile new file mode 100644 index 000000000000..532c2570c58b --- /dev/null +++ b/drivers/usb/mtu3/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_USB_MTU3) += mtu3.o +mtu3-y := mtu3_plat.o mtu3_core.o mtu3_gadget_ep0.o mtu3_gadget.o mtu3_qmu.o diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h new file mode 100644 index 000000000000..ad1a1338bff1 --- /dev/null +++ b/drivers/usb/mtu3/mtu3.h @@ -0,0 +1,341 @@ +/* + * mtu3.h - MediaTek USB3 DRD header + * + * Copyright (C) 2016 MediaTek Inc. + * + * Author: Chunfeng Yun <chunfeng.yun@mediatek.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __MTU3_H__ +#define __MTU3_H__ + +#include <linux/device.h> +#include <linux/dmapool.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/phy/phy.h> +#include <linux/regulator/consumer.h> +#include <linux/usb.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/otg.h> + +struct mtu3; +struct mtu3_ep; +struct mtu3_request; + +#include "mtu3_hw_regs.h" +#include "mtu3_qmu.h" + +#define MU3D_EP_TXCR0(epnum) (U3D_TX1CSR0 + (((epnum) - 1) * 0x10)) +#define MU3D_EP_TXCR1(epnum) (U3D_TX1CSR1 + (((epnum) - 1) * 0x10)) +#define MU3D_EP_TXCR2(epnum) (U3D_TX1CSR2 + (((epnum) - 1) * 0x10)) + +#define MU3D_EP_RXCR0(epnum) (U3D_RX1CSR0 + (((epnum) - 1) * 0x10)) +#define MU3D_EP_RXCR1(epnum) (U3D_RX1CSR1 + (((epnum) - 1) * 0x10)) +#define MU3D_EP_RXCR2(epnum) (U3D_RX1CSR2 + (((epnum) - 1) * 0x10)) + +#define USB_QMU_RQCSR(epnum) (U3D_RXQCSR1 + (((epnum) - 1) * 0x10)) +#define USB_QMU_RQSAR(epnum) (U3D_RXQSAR1 + (((epnum) - 1) * 0x10)) +#define USB_QMU_RQCPR(epnum) (U3D_RXQCPR1 + (((epnum) - 1) * 0x10)) + +#define USB_QMU_TQCSR(epnum) (U3D_TXQCSR1 + (((epnum) - 1) * 0x10)) +#define USB_QMU_TQSAR(epnum) (U3D_TXQSAR1 + (((epnum) - 1) * 0x10)) +#define USB_QMU_TQCPR(epnum) (U3D_TXQCPR1 + (((epnum) - 1) * 0x10)) + +#define SSUSB_U2_CTRL(p) (U3D_SSUSB_U2_CTRL_0P + ((p) * 0x08)) + +#define MTU3_DRIVER_NAME "mtu3" +#define DMA_ADDR_INVALID (~(dma_addr_t)0) + +#define MTU3_EP_ENABLED BIT(0) +#define MTU3_EP_STALL BIT(1) +#define MTU3_EP_WEDGE BIT(2) +#define MTU3_EP_BUSY BIT(3) + +#define MTU3_U2_IP_SLOT_DEFAULT 1 + +/** + * Normally the device works on HS or SS, to simplify fifo management, + * devide fifo into some 512B parts, use bitmap to manage it; And + * 128 bits size of bitmap is large enough, that means it can manage + * up to 64KB fifo size. + * NOTE: MTU3_EP_FIFO_UNIT should be power of two + */ +#define MTU3_EP_FIFO_UNIT (1 << 9) +#define MTU3_FIFO_BIT_SIZE 128 +#define MTU3_U2_IP_EP0_FIFO_SIZE 64 + +/** + * Maximum size of ep0 response buffer for ch9 requests, + * the SET_SEL request uses 6 so far, and GET_STATUS is 2 + */ +#define EP0_RESPONSE_BUF 6 + +/* device operated link and speed got from DEVICE_CONF register */ +enum mtu3_speed { + MTU3_SPEED_INACTIVE = 0, + MTU3_SPEED_FULL = 1, + MTU3_SPEED_HIGH = 3, +}; + +/** + * @MU3D_EP0_STATE_SETUP: waits for SETUP or received a SETUP + * without data stage. + * @MU3D_EP0_STATE_TX: IN data stage + * @MU3D_EP0_STATE_RX: OUT data stage + * @MU3D_EP0_STATE_TX_END: the last IN data is transferred, and + * waits for its completion interrupt + * @MU3D_EP0_STATE_STALL: ep0 is in stall status, will be auto-cleared + * after receives a SETUP. + */ +enum mtu3_g_ep0_state { + MU3D_EP0_STATE_SETUP = 1, + MU3D_EP0_STATE_TX, + MU3D_EP0_STATE_RX, + MU3D_EP0_STATE_TX_END, + MU3D_EP0_STATE_STALL, +}; + +/** + * @base: the base address of fifo + * @limit: the bitmap size in bits + * @bitmap: fifo bitmap in unit of @MTU3_EP_FIFO_UNIT + */ +struct mtu3_fifo_info { + u32 base; + u32 limit; + DECLARE_BITMAP(bitmap, MTU3_FIFO_BIT_SIZE); +}; + +/** + * General Purpose Descriptor (GPD): + * The format of TX GPD is a little different from RX one. + * And the size of GPD is 16 bytes. + * + * @flag: + * bit0: Hardware Own (HWO) + * bit1: Buffer Descriptor Present (BDP), always 0, BD is not supported + * bit2: Bypass (BPS), 1: HW skips this GPD if HWO = 1 + * bit7: Interrupt On Completion (IOC) + * @chksum: This is used to validate the contents of this GPD; + * If TXQ_CS_EN / RXQ_CS_EN bit is set, an interrupt is issued + * when checksum validation fails; + * Checksum value is calculated over the 16 bytes of the GPD by default; + * @data_buf_len (RX ONLY): This value indicates the length of + * the assigned data buffer + * @next_gpd: Physical address of the next GPD + * @buffer: Physical address of the data buffer + * @buf_len: + * (TX): This value indicates the length of the assigned data buffer + * (RX): The total length of data received + * @ext_len: reserved + * @ext_flag: + * bit5 (TX ONLY): Zero Length Packet (ZLP), + */ +struct qmu_gpd { + __u8 flag; + __u8 chksum; + __le16 data_buf_len; + __le32 next_gpd; + __le32 buffer; + __le16 buf_len; + __u8 ext_len; + __u8 ext_flag; +} __packed; + +/** +* dma: physical base address of GPD segment +* start: virtual base address of GPD segment +* end: the last GPD element +* enqueue: the first empty GPD to use +* dequeue: the first completed GPD serviced by ISR +* NOTE: the size of GPD ring should be >= 2 +*/ +struct mtu3_gpd_ring { + dma_addr_t dma; + struct qmu_gpd *start; + struct qmu_gpd *end; + struct qmu_gpd *enqueue; + struct qmu_gpd *dequeue; +}; + +/** + * @fifo_size: it is (@slot + 1) * @fifo_seg_size + * @fifo_seg_size: it is roundup_pow_of_two(@maxp) + */ +struct mtu3_ep { + struct usb_ep ep; + char name[12]; + struct mtu3 *mtu; + u8 epnum; + u8 type; + u8 is_in; + u16 maxp; + int slot; + u32 fifo_size; + u32 fifo_addr; + u32 fifo_seg_size; + struct mtu3_fifo_info *fifo; + + struct list_head req_list; + struct mtu3_gpd_ring gpd_ring; + const struct usb_endpoint_descriptor *desc; + + int flags; + u8 wedged; + u8 busy; +}; + +struct mtu3_request { + struct usb_request request; + struct list_head list; + struct mtu3_ep *mep; + struct mtu3 *mtu; + struct qmu_gpd *gpd; + int epnum; +}; + +/** + * struct mtu3 - device driver instance data. + * @slot: MTU3_U2_IP_SLOT_DEFAULT for U2 IP + * @may_wakeup: means device's remote wakeup is enabled + * @is_self_powered: is reported in device status and the config descriptor + * @ep0_req: dummy request used while handling standard USB requests + * for GET_STATUS and SET_SEL + * @setup_buf: ep0 response buffer for GET_STATUS and SET_SEL requests + */ +struct mtu3 { + spinlock_t lock; + struct device *dev; + void __iomem *mac_base; + void __iomem *ippc_base; + struct phy *phy; + struct regulator *vusb33; + struct clk *sys_clk; + int irq; + + struct mtu3_fifo_info tx_fifo; + struct mtu3_fifo_info rx_fifo; + + struct mtu3_ep *ep_array; + struct mtu3_ep *in_eps; + struct mtu3_ep *out_eps; + struct mtu3_ep *ep0; + int num_eps; + int slot; + int active_ep; + + struct dma_pool *qmu_gpd_pool; + enum mtu3_g_ep0_state ep0_state; + struct usb_gadget g; /* the gadget */ + struct usb_gadget_driver *gadget_driver; + struct mtu3_request ep0_req; + u8 setup_buf[EP0_RESPONSE_BUF]; + + unsigned is_active:1; + unsigned may_wakeup:1; + unsigned is_self_powered:1; + unsigned test_mode:1; + unsigned softconnect:1; + + u8 address; + u8 test_mode_nr; + u32 hw_version; +}; + +static inline struct mtu3 *gadget_to_mtu3(struct usb_gadget *g) +{ + return container_of(g, struct mtu3, g); +} + +static inline int is_first_entry(const struct list_head *list, + const struct list_head *head) +{ + return list_is_last(head, list); +} + +static inline struct mtu3_request *to_mtu3_request(struct usb_request *req) +{ + return req ? container_of(req, struct mtu3_request, request) : NULL; +} + +static inline struct mtu3_ep *to_mtu3_ep(struct usb_ep *ep) +{ + return ep ? container_of(ep, struct mtu3_ep, ep) : NULL; +} + +static inline struct mtu3_request *next_request(struct mtu3_ep *mep) +{ + struct list_head *queue = &mep->req_list; + + if (list_empty(queue)) + return NULL; + + return list_first_entry(queue, struct mtu3_request, list); +} + +static inline void mtu3_writel(void __iomem *base, u32 offset, u32 data) +{ + writel(data, base + offset); +} + +static inline u32 mtu3_readl(void __iomem *base, u32 offset) +{ + return readl(base + offset); +} + +static inline void mtu3_setbits(void __iomem *base, u32 offset, u32 bits) +{ + void __iomem *addr = base + offset; + u32 tmp = readl(addr); + + writel((tmp | (bits)), addr); +} + +static inline void mtu3_clrbits(void __iomem *base, u32 offset, u32 bits) +{ + void __iomem *addr = base + offset; + u32 tmp = readl(addr); + + writel((tmp & ~(bits)), addr); +} + +int ssusb_check_clocks(struct mtu3 *mtu, u32 ex_clks); +struct usb_request *mtu3_alloc_request(struct usb_ep *ep, gfp_t gfp_flags); +void mtu3_free_request(struct usb_ep *ep, struct usb_request *req); +void mtu3_req_complete(struct mtu3_ep *mep, + struct usb_request *req, int status); + +int mtu3_config_ep(struct mtu3 *mtu, struct mtu3_ep *mep, + int interval, int burst, int mult); +void mtu3_deconfig_ep(struct mtu3 *mtu, struct mtu3_ep *mep); +void mtu3_ep_stall_set(struct mtu3_ep *mep, bool set); +void mtu3_ep0_setup(struct mtu3 *mtu); +void mtu3_start(struct mtu3 *mtu); +void mtu3_stop(struct mtu3 *mtu); +void mtu3_hs_softconn_set(struct mtu3 *mtu, bool enable); + +int mtu3_gadget_setup(struct mtu3 *mtu); +void mtu3_gadget_cleanup(struct mtu3 *mtu); +void mtu3_gadget_reset(struct mtu3 *mtu); +void mtu3_gadget_suspend(struct mtu3 *mtu); +void mtu3_gadget_resume(struct mtu3 *mtu); +void mtu3_gadget_disconnect(struct mtu3 *mtu); +int ssusb_gadget_init(struct mtu3 *mtu); +void ssusb_gadget_exit(struct mtu3 *mtu); + +irqreturn_t mtu3_ep0_isr(struct mtu3 *mtu); +extern const struct usb_ep_ops mtu3_ep0_ops; + +#endif diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c new file mode 100644 index 000000000000..33d21dddb8a0 --- /dev/null +++ b/drivers/usb/mtu3/mtu3_core.c @@ -0,0 +1,675 @@ +/* + * mtu3_core.c - hardware access layer and gadget init/exit of + * MediaTek usb3 Dual-Role Controller Driver + * + * Copyright (C) 2016 MediaTek Inc. + * + * Author: Chunfeng Yun <chunfeng.yun@mediatek.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> + +#include "mtu3.h" + +static int ep_fifo_alloc(struct mtu3_ep *mep, u32 seg_size) +{ + struct mtu3_fifo_info *fifo = mep->fifo; + u32 num_bits = DIV_ROUND_UP(seg_size, MTU3_EP_FIFO_UNIT); + u32 start_bit; + + /* ensure that @mep->fifo_seg_size is power of two */ + num_bits = roundup_pow_of_two(num_bits); + if (num_bits > fifo->limit) + return -EINVAL; + + mep->fifo_seg_size = num_bits * MTU3_EP_FIFO_UNIT; + num_bits = num_bits * (mep->slot + 1); + start_bit = bitmap_find_next_zero_area(fifo->bitmap, + fifo->limit, 0, num_bits, 0); + if (start_bit >= fifo->limit) + return -EOVERFLOW; + + bitmap_set(fifo->bitmap, start_bit, num_bits); + mep->fifo_size = num_bits * MTU3_EP_FIFO_UNIT; + mep->fifo_addr = fifo->base + MTU3_EP_FIFO_UNIT * start_bit; + + dev_dbg(mep->mtu->dev, "%s fifo:%#x/%#x, start_bit: %d\n", + __func__, mep->fifo_seg_size, mep->fifo_size, start_bit); + + return mep->fifo_addr; +} + +static void ep_fifo_free(struct mtu3_ep *mep) +{ + struct mtu3_fifo_info *fifo = mep->fifo; + u32 addr = mep->fifo_addr; + u32 bits = mep->fifo_size / MTU3_EP_FIFO_UNIT; + u32 start_bit; + + if (unlikely(addr < fifo->base || bits > fifo->limit)) + return; + + start_bit = (addr - fifo->base) / MTU3_EP_FIFO_UNIT; + bitmap_clear(fifo->bitmap, start_bit, bits); + mep->fifo_size = 0; + mep->fifo_seg_size = 0; + + dev_dbg(mep->mtu->dev, "%s size:%#x/%#x, start_bit: %d\n", + __func__, mep->fifo_seg_size, mep->fifo_size, start_bit); +} + +/* set/clear U3D HS device soft connect */ +void mtu3_hs_softconn_set(struct mtu3 *mtu, bool enable) +{ + if (enable) { + mtu3_setbits(mtu->mac_base, U3D_POWER_MANAGEMENT, + SOFT_CONN | SUSPENDM_ENABLE); + } else { + mtu3_clrbits(mtu->mac_base, U3D_POWER_MANAGEMENT, + SOFT_CONN | SUSPENDM_ENABLE); + } + dev_dbg(mtu->dev, "SOFTCONN = %d\n", !!enable); +} + +/* only port0 of U2/U3 supports device mode */ +static int mtu3_device_enable(struct mtu3 *mtu) +{ + void __iomem *ibase = mtu->ippc_base; + u32 check_clk = 0; + + mtu3_clrbits(ibase, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN); + mtu3_clrbits(ibase, SSUSB_U2_CTRL(0), + (SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN | + SSUSB_U2_PORT_HOST_SEL)); + mtu3_setbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL); + + return ssusb_check_clocks(mtu, check_clk); +} + +static void mtu3_device_disable(struct mtu3 *mtu) +{ + void __iomem *ibase = mtu->ippc_base; + + mtu3_setbits(ibase, SSUSB_U2_CTRL(0), + SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN); + mtu3_clrbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL); + mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN); +} + +/* reset U3D's device module. */ +static void mtu3_device_reset(struct mtu3 *mtu) +{ + void __iomem *ibase = mtu->ippc_base; + + mtu3_setbits(ibase, U3D_SSUSB_DEV_RST_CTRL, SSUSB_DEV_SW_RST); + udelay(1); + mtu3_clrbits(ibase, U3D_SSUSB_DEV_RST_CTRL, SSUSB_DEV_SW_RST); +} + +/* disable all interrupts */ +static void mtu3_intr_disable(struct mtu3 *mtu) +{ + void __iomem *mbase = mtu->mac_base; + + /* Disable level 1 interrupts */ + mtu3_writel(mbase, U3D_LV1IECR, ~0x0); + + /* Disable endpoint interrupts */ + mtu3_writel(mbase, U3D_EPIECR, ~0x0); +} + +static void mtu3_intr_status_clear(struct mtu3 *mtu) +{ + void __iomem *mbase = mtu->mac_base; + + /* Clear EP0 and Tx/Rx EPn interrupts status */ + mtu3_writel(mbase, U3D_EPISR, ~0x0); + + /* Clear U2 USB common interrupts status */ + mtu3_writel(mbase, U3D_COMMON_USB_INTR, ~0x0); + + /* Clear speed change interrupt status */ + mtu3_writel(mbase, U3D_DEV_LINK_INTR, ~0x0); +} + +/* enable system global interrupt */ +static void mtu3_intr_enable(struct mtu3 *mtu) +{ + void __iomem *mbase = mtu->mac_base; + u32 value; + + /*Enable level 1 interrupts (BMU, QMU, MAC3, DMA, MAC2, EPCTL) */ + value = BMU_INTR | QMU_INTR | MAC2_INTR | EP_CTRL_INTR; + mtu3_writel(mbase, U3D_LV1IESR, value); + + /* Enable U2 common USB interrupts */ + value = SUSPEND_INTR | RESUME_INTR | RESET_INTR; + mtu3_writel(mbase, U3D_COMMON_USB_INTR_ENABLE, value); + + /* Enable QMU interrupts. */ + value = TXQ_CSERR_INT | TXQ_LENERR_INT | RXQ_CSERR_INT | + RXQ_LENERR_INT | RXQ_ZLPERR_INT; + mtu3_writel(mbase, U3D_QIESR1, value); + + /* Enable speed change interrupt */ + mtu3_writel(mbase, U3D_DEV_LINK_INTR_ENABLE, SSUSB_DEV_SPEED_CHG_INTR); +} + +/* set/clear the stall and toggle bits for non-ep0 */ +void mtu3_ep_stall_set(struct mtu3_ep *mep, bool set) +{ + struct mtu3 *mtu = mep->mtu; + void __iomem *mbase = mtu->mac_base; + u8 epnum = mep->epnum; + u32 csr; + + if (mep->is_in) { /* TX */ + csr = mtu3_readl(mbase, MU3D_EP_TXCR0(epnum)) & TX_W1C_BITS; + if (set) + csr |= TX_SENDSTALL; + else + csr = (csr & (~TX_SENDSTALL)) | TX_SENTSTALL; + mtu3_writel(mbase, MU3D_EP_TXCR0(epnum), csr); + } else { /* RX */ + csr = mtu3_readl(mbase, MU3D_EP_RXCR0(epnum)) & RX_W1C_BITS; + if (set) + csr |= RX_SENDSTALL; + else + csr = (csr & (~RX_SENDSTALL)) | RX_SENTSTALL; + mtu3_writel(mbase, MU3D_EP_RXCR0(epnum), csr); + } + + if (!set) { + mtu3_setbits(mbase, U3D_EP_RST, EP_RST(mep->is_in, epnum)); + mtu3_clrbits(mbase, U3D_EP_RST, EP_RST(mep->is_in, epnum)); + mep->flags &= ~MTU3_EP_STALL; + } else { + mep->flags |= MTU3_EP_STALL; + } + + dev_dbg(mtu->dev, "%s: %s\n", mep->name, + set ? "SEND STALL" : "CLEAR STALL, with EP RESET"); +} + +void mtu3_start(struct mtu3 *mtu) +{ + void __iomem *mbase = mtu->mac_base; + + dev_dbg(mtu->dev, "%s devctl 0x%x\n", __func__, + mtu3_readl(mbase, U3D_DEVICE_CONTROL)); + + mtu3_clrbits(mtu->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN); + + /* Initialize the default interrupts */ + mtu3_intr_enable(mtu); + + mtu->is_active = 1; + + if (mtu->softconnect) + mtu3_hs_softconn_set(mtu, 1); +} + +void mtu3_stop(struct mtu3 *mtu) +{ + dev_dbg(mtu->dev, "%s\n", __func__); + + mtu3_intr_disable(mtu); + mtu3_intr_status_clear(mtu); + + if (mtu->softconnect) + mtu3_hs_softconn_set(mtu, 0); + + mtu->is_active = 0; + mtu3_setbits(mtu->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN); +} + +/* for non-ep0 */ +int mtu3_config_ep(struct mtu3 *mtu, struct mtu3_ep *mep, + int interval, int burst, int mult) +{ + void __iomem *mbase = mtu->mac_base; + int epnum = mep->epnum; + u32 csr0, csr1, csr2; + int fifo_sgsz, fifo_addr; + int num_pkts; + + fifo_addr = ep_fifo_alloc(mep, mep->maxp); + if (fifo_addr < 0) { + dev_err(mtu->dev, "alloc ep fifo failed(%d)\n", mep->maxp); + return -ENOMEM; + } + fifo_sgsz = ilog2(mep->fifo_seg_size); + dev_dbg(mtu->dev, "%s fifosz: %x(%x/%x)\n", __func__, fifo_sgsz, + mep->fifo_seg_size, mep->fifo_size); + + if (mep->is_in) { + csr0 = TX_TXMAXPKTSZ(mep->maxp); + csr0 |= TX_DMAREQEN; + + num_pkts = (burst + 1) * (mult + 1) - 1; + csr1 = TX_SS_BURST(burst) | TX_SLOT(mep->slot); + csr1 |= TX_MAX_PKT(num_pkts) | TX_MULT(mult); + + csr2 = TX_FIFOADDR(fifo_addr >> 4); + csr2 |= TX_FIFOSEGSIZE(fifo_sgsz); + + switch (mep->type) { + case USB_ENDPOINT_XFER_BULK: + csr1 |= TX_TYPE(TYPE_BULK); + break; + case USB_ENDPOINT_XFER_ISOC: + csr1 |= TX_TYPE(TYPE_ISO); + csr2 |= TX_BINTERVAL(interval); + break; + case USB_ENDPOINT_XFER_INT: + csr1 |= TX_TYPE(TYPE_INT); + csr2 |= TX_BINTERVAL(interval); + break; + } + + /* Enable QMU Done interrupt */ + mtu3_setbits(mbase, U3D_QIESR0, QMU_TX_DONE_INT(epnum)); + + mtu3_writel(mbase, MU3D_EP_TXCR0(epnum), csr0); + mtu3_writel(mbase, MU3D_EP_TXCR1(epnum), csr1); + mtu3_writel(mbase, MU3D_EP_TXCR2(epnum), csr2); + + dev_dbg(mtu->dev, "U3D_TX%d CSR0:%#x, CSR1:%#x, CSR2:%#x\n", + epnum, mtu3_readl(mbase, MU3D_EP_TXCR0(epnum)), + mtu3_readl(mbase, MU3D_EP_TXCR1(epnum)), + mtu3_readl(mbase, MU3D_EP_TXCR2(epnum))); + } else { + csr0 = RX_RXMAXPKTSZ(mep->maxp); + csr0 |= RX_DMAREQEN; + + num_pkts = (burst + 1) * (mult + 1) - 1; + csr1 = RX_SS_BURST(burst) | RX_SLOT(mep->slot); + csr1 |= RX_MAX_PKT(num_pkts) | RX_MULT(mult); + + csr2 = RX_FIFOADDR(fifo_addr >> 4); + csr2 |= RX_FIFOSEGSIZE(fifo_sgsz); + + switch (mep->type) { + case USB_ENDPOINT_XFER_BULK: + csr1 |= RX_TYPE(TYPE_BULK); + break; + case USB_ENDPOINT_XFER_ISOC: + csr1 |= RX_TYPE(TYPE_ISO); + csr2 |= RX_BINTERVAL(interval); + break; + case USB_ENDPOINT_XFER_INT: + csr1 |= RX_TYPE(TYPE_INT); + csr2 |= RX_BINTERVAL(interval); + break; + } + + /*Enable QMU Done interrupt */ + mtu3_setbits(mbase, U3D_QIESR0, QMU_RX_DONE_INT(epnum)); + + mtu3_writel(mbase, MU3D_EP_RXCR0(epnum), csr0); + mtu3_writel(mbase, MU3D_EP_RXCR1(epnum), csr1); + mtu3_writel(mbase, MU3D_EP_RXCR2(epnum), csr2); + + dev_dbg(mtu->dev, "U3D_RX%d CSR0:%#x, CSR1:%#x, CSR2:%#x\n", + epnum, mtu3_readl(mbase, MU3D_EP_RXCR0(epnum)), + mtu3_readl(mbase, MU3D_EP_RXCR1(epnum)), + mtu3_readl(mbase, MU3D_EP_RXCR2(epnum))); + } + + dev_dbg(mtu->dev, "csr0:%#x, csr1:%#x, csr2:%#x\n", csr0, csr1, csr2); + dev_dbg(mtu->dev, "%s: %s, fifo-addr:%#x, fifo-size:%#x(%#x/%#x)\n", + __func__, mep->name, mep->fifo_addr, mep->fifo_size, + fifo_sgsz, mep->fifo_seg_size); + + return 0; +} + +/* for non-ep0 */ +void mtu3_deconfig_ep(struct mtu3 *mtu, struct mtu3_ep *mep) +{ + void __iomem *mbase = mtu->mac_base; + int epnum = mep->epnum; + + if (mep->is_in) { + mtu3_writel(mbase, MU3D_EP_TXCR0(epnum), 0); + mtu3_writel(mbase, MU3D_EP_TXCR1(epnum), 0); + mtu3_writel(mbase, MU3D_EP_TXCR2(epnum), 0); + mtu3_setbits(mbase, U3D_QIECR0, QMU_TX_DONE_INT(epnum)); + } else { + mtu3_writel(mbase, MU3D_EP_RXCR0(epnum), 0); + mtu3_writel(mbase, MU3D_EP_RXCR1(epnum), 0); + mtu3_writel(mbase, MU3D_EP_RXCR2(epnum), 0); + mtu3_setbits(mbase, U3D_QIECR0, QMU_RX_DONE_INT(epnum)); + } + + ep_fifo_free(mep); + + dev_dbg(mtu->dev, "%s: %s\n", __func__, mep->name); +} + +/* + * 1. when supports only HS, the fifo is shared for all EPs, and + * the capability registers of @EPNTXFFSZ or @EPNRXFFSZ indicate + * the total fifo size of non-ep0, and ep0's is fixed to 64B, + * so the total fifo size is 64B + @EPNTXFFSZ; + * Due to the first 64B should be reserved for EP0, non-ep0's fifo + * starts from offset 64 and are divided into two equal parts for + * TX or RX EPs for simplification. + */ +static void get_ep_fifo_config(struct mtu3 *mtu) +{ + struct mtu3_fifo_info *tx_fifo; + struct mtu3_fifo_info *rx_fifo; + u32 fifosize; + + fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNTXFFSZ); + tx_fifo = &mtu->tx_fifo; + tx_fifo->base = MTU3_U2_IP_EP0_FIFO_SIZE; + tx_fifo->limit = (fifosize / MTU3_EP_FIFO_UNIT) >> 1; + bitmap_zero(tx_fifo->bitmap, MTU3_FIFO_BIT_SIZE); + + rx_fifo = &mtu->rx_fifo; + rx_fifo->base = + tx_fifo->base + tx_fifo->limit * MTU3_EP_FIFO_UNIT; + rx_fifo->limit = tx_fifo->limit; + bitmap_zero(rx_fifo->bitmap, MTU3_FIFO_BIT_SIZE); + mtu->slot = MTU3_U2_IP_SLOT_DEFAULT; + + dev_dbg(mtu->dev, "%s, TX: base-%d, limit-%d; RX: base-%d, limit-%d\n", + __func__, tx_fifo->base, tx_fifo->limit, + rx_fifo->base, rx_fifo->limit); +} + +void mtu3_ep0_setup(struct mtu3 *mtu) +{ + u32 maxpacket = mtu->g.ep0->maxpacket; + u32 csr; + + dev_dbg(mtu->dev, "%s maxpacket: %d\n", __func__, maxpacket); + + csr = mtu3_readl(mtu->mac_base, U3D_EP0CSR); + csr &= ~EP0_MAXPKTSZ_MSK; + csr |= EP0_MAXPKTSZ(maxpacket); + csr &= EP0_W1C_BITS; + mtu3_writel(mtu->mac_base, U3D_EP0CSR, csr); + + /* Enable EP0 interrupt */ + mtu3_writel(mtu->mac_base, U3D_EPIESR, EP0ISR); +} + +static int mtu3_mem_alloc(struct mtu3 *mtu) +{ + void __iomem *mbase = mtu->mac_base; + struct mtu3_ep *ep_array; + int in_ep_num, out_ep_num; + u32 cap_epinfo; + int ret; + int i; + + mtu->hw_version = mtu3_readl(mtu->ippc_base, U3D_SSUSB_HW_ID); + + cap_epinfo = mtu3_readl(mbase, U3D_CAP_EPINFO); + in_ep_num = CAP_TX_EP_NUM(cap_epinfo); + out_ep_num = CAP_RX_EP_NUM(cap_epinfo); + + dev_info(mtu->dev, "IP version 0x%x\n", mtu->hw_version); + dev_info(mtu->dev, "fifosz/epnum: Tx=%#x/%d, Rx=%#x/%d\n", + mtu3_readl(mbase, U3D_CAP_EPNTXFFSZ), in_ep_num, + mtu3_readl(mbase, U3D_CAP_EPNRXFFSZ), out_ep_num); + + /* one for ep0, another is reserved */ + mtu->num_eps = min(in_ep_num, out_ep_num) + 1; + ep_array = kcalloc(mtu->num_eps * 2, sizeof(*ep_array), GFP_KERNEL); + if (ep_array == NULL) + return -ENOMEM; + + mtu->ep_array = ep_array; + mtu->in_eps = ep_array; + mtu->out_eps = &ep_array[mtu->num_eps]; + /* ep0 uses in_eps[0], out_eps[0] is reserved */ + mtu->ep0 = mtu->in_eps; + + mtu->ep0->mtu = mtu; + mtu->ep0->epnum = 0; + + for (i = 1; i < mtu->num_eps; i++) { + struct mtu3_ep *mep = mtu->in_eps + i; + + mep->fifo = &mtu->tx_fifo; + mep = mtu->out_eps + i; + mep->fifo = &mtu->rx_fifo; + } + + get_ep_fifo_config(mtu); + + ret = mtu3_qmu_init(mtu); + if (ret) + kfree(mtu->ep_array); + + return ret; +} + +static void mtu3_mem_free(struct mtu3 *mtu) +{ + mtu3_qmu_exit(mtu); + kfree(mtu->ep_array); +} + +static void mtu3_regs_init(struct mtu3 *mtu) +{ + + void __iomem *mbase = mtu->mac_base; + + /* be sure interrupts are disabled before registration of ISR */ + mtu3_intr_disable(mtu); + mtu3_intr_status_clear(mtu); + + mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN); + /* HS/FS detected by HW */ + mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE); + + /* delay about 0.1us from detecting reset to send chirp-K */ + mtu3_clrbits(mbase, U3D_LINK_RESET_INFO, WTCHRP_MSK); + + /* U2/U3 detected by HW */ + mtu3_writel(mbase, U3D_DEVICE_CONF, 0); + + /* enable QMU 16B checksum */ + mtu3_setbits(mbase, U3D_QCR0, QMU_CS16B_EN); + + /* vbus detected by HW */ + mtu3_clrbits(mbase, U3D_MISC_CTRL, VBUS_FRC_EN | VBUS_ON); +} + +static irqreturn_t mtu3_link_isr(struct mtu3 *mtu) +{ + void __iomem *mbase = mtu->mac_base; + enum usb_device_speed udev_speed; + u32 maxpkt = 64; + u32 link; + u32 speed; + + link = mtu3_readl(mbase, U3D_DEV_LINK_INTR); + link &= mtu3_readl(mbase, U3D_DEV_LINK_INTR_ENABLE); + mtu3_writel(mbase, U3D_DEV_LINK_INTR, link); /* W1C */ + dev_dbg(mtu->dev, "=== LINK[%x] ===\n", link); + + if (!(link & SSUSB_DEV_SPEED_CHG_INTR)) + return IRQ_NONE; + + speed = SSUSB_DEV_SPEED(mtu3_readl(mbase, U3D_DEVICE_CONF)); + + switch (speed) { + case MTU3_SPEED_FULL: + udev_speed = USB_SPEED_FULL; + /*BESLCK = 4 < BESLCK_U3 = 10 < BESLDCK = 15 */ + mtu3_writel(mbase, U3D_USB20_LPM_PARAMETER, LPM_BESLDCK(0xf) + | LPM_BESLCK(4) | LPM_BESLCK_U3(0xa)); + mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, + LPM_BESL_STALL | LPM_BESLD_STALL); + break; + case MTU3_SPEED_HIGH: + udev_speed = USB_SPEED_HIGH; + /*BESLCK = 4 < BESLCK_U3 = 10 < BESLDCK = 15 */ + mtu3_writel(mbase, U3D_USB20_LPM_PARAMETER, LPM_BESLDCK(0xf) + | LPM_BESLCK(4) | LPM_BESLCK_U3(0xa)); + mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, + LPM_BESL_STALL | LPM_BESLD_STALL); + break; + default: + udev_speed = USB_SPEED_UNKNOWN; + break; + } + dev_dbg(mtu->dev, "%s: %s\n", __func__, usb_speed_string(udev_speed)); + + mtu->g.speed = udev_speed; + mtu->g.ep0->maxpacket = maxpkt; + mtu->ep0_state = MU3D_EP0_STATE_SETUP; + + if (udev_speed == USB_SPEED_UNKNOWN) + mtu3_gadget_disconnect(mtu); + else + mtu3_ep0_setup(mtu); + + return IRQ_HANDLED; +} + +static irqreturn_t mtu3_u2_common_isr(struct mtu3 *mtu) +{ + void __iomem *mbase = mtu->mac_base; + u32 u2comm; + + u2comm = mtu3_readl(mbase, U3D_COMMON_USB_INTR); + u2comm &= mtu3_readl(mbase, U3D_COMMON_USB_INTR_ENABLE); + mtu3_writel(mbase, U3D_COMMON_USB_INTR, u2comm); /* W1C */ + dev_dbg(mtu->dev, "=== U2COMM[%x] ===\n", u2comm); + + if (u2comm & SUSPEND_INTR) + mtu3_gadget_suspend(mtu); + + if (u2comm & RESUME_INTR) + mtu3_gadget_resume(mtu); + + if (u2comm & RESET_INTR) + mtu3_gadget_reset(mtu); + + return IRQ_HANDLED; +} + +irqreturn_t mtu3_irq(int irq, void *data) +{ + struct mtu3 *mtu = (struct mtu3 *)data; + unsigned long flags; + u32 level1; + + spin_lock_irqsave(&mtu->lock, flags); + + /* U3D_LV1ISR is RU */ + level1 = mtu3_readl(mtu->mac_base, U3D_LV1ISR); + level1 &= mtu3_readl(mtu->mac_base, U3D_LV1IER); + + if (level1 & EP_CTRL_INTR) + mtu3_link_isr(mtu); + + if (level1 & MAC2_INTR) + mtu3_u2_common_isr(mtu); + + if (level1 & BMU_INTR) + mtu3_ep0_isr(mtu); + + if (level1 & QMU_INTR) + mtu3_qmu_isr(mtu); + + spin_unlock_irqrestore(&mtu->lock, flags); + + return IRQ_HANDLED; +} + +static int mtu3_hw_init(struct mtu3 *mtu) +{ + int ret; + + mtu3_device_reset(mtu); + + ret = mtu3_device_enable(mtu); + if (ret) { + dev_err(mtu->dev, "device enable failed %d\n", ret); + return ret; + } + + ret = mtu3_mem_alloc(mtu); + if (ret) + return -ENOMEM; + + mtu3_regs_init(mtu); + + return 0; +} + +static void mtu3_hw_exit(struct mtu3 *mtu) +{ + mtu3_device_disable(mtu); + mtu3_mem_free(mtu); +} + +/*-------------------------------------------------------------------------*/ + +int ssusb_gadget_init(struct mtu3 *mtu) +{ + struct device *dev = mtu->dev; + int ret; + + ret = mtu3_hw_init(mtu); + if (ret) { + dev_err(dev, "mtu3 hw init failed:%d\n", ret); + return ret; + } + + ret = devm_request_irq(dev, mtu->irq, mtu3_irq, 0, dev_name(dev), mtu); + if (ret) { + dev_err(dev, "request irq %d failed!\n", mtu->irq); + goto irq_err; + } + + device_init_wakeup(dev, true); + + ret = mtu3_gadget_setup(mtu); + if (ret) { + dev_err(dev, "mtu3 gadget init failed:%d\n", ret); + goto gadget_err; + } + + dev_dbg(dev, " %s() done...\n", __func__); + + return 0; + +gadget_err: + device_init_wakeup(dev, false); + +irq_err: + mtu3_hw_exit(mtu); + dev_err(dev, " %s() fail...\n", __func__); + + return ret; +} + +void ssusb_gadget_exit(struct mtu3 *mtu) +{ + mtu3_gadget_cleanup(mtu); + device_init_wakeup(mtu->dev, false); + mtu3_hw_exit(mtu); +} diff --git a/drivers/usb/mtu3/mtu3_gadget.c b/drivers/usb/mtu3/mtu3_gadget.c new file mode 100644 index 000000000000..0e25e0f9e605 --- /dev/null +++ b/drivers/usb/mtu3/mtu3_gadget.c @@ -0,0 +1,709 @@ +/* + * mtu3_gadget.c - MediaTek usb3 DRD peripheral support + * + * Copyright (C) 2016 MediaTek Inc. + * + * Author: Chunfeng Yun <chunfeng.yun@mediatek.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include "mtu3.h" |