diff options
Diffstat (limited to 'drivers/tty')
| -rw-r--r-- | drivers/tty/serial/qcom_geni_serial.c | 31 |
1 files changed, 28 insertions, 3 deletions
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index a4468db3b734..f701c7e9b89d 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -945,6 +945,7 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport, struct qcom_geni_serial_port *port = to_dev_port(uport, uport); unsigned long clk_rate; u32 ver, sampling_rate; + unsigned int avg_bw_core; qcom_geni_serial_stop_rx(uport); /* baud rate */ @@ -966,6 +967,16 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport, ser_clk_cfg = SER_CLK_EN; ser_clk_cfg |= clk_div << CLK_DIV_SHFT; + /* + * Bump up BW vote on CPU and CORE path as driver supports FIFO mode + * only. + */ + avg_bw_core = (baud > 115200) ? Bps_to_icc(CORE_2X_50_MHZ) + : GENI_DEFAULT_BW; + port->se.icc_paths[GENI_TO_CORE].avg_bw = avg_bw_core; + port->se.icc_paths[CPU_TO_GENI].avg_bw = Bps_to_icc(baud); + geni_icc_set_bw(&port->se); + /* parity */ tx_trans_cfg = readl(uport->membase + SE_UART_TX_TRANS_CFG); tx_parity_cfg = readl(uport->membase + SE_UART_TX_PARITY_CFG); @@ -1235,11 +1246,14 @@ static void qcom_geni_serial_pm(struct uart_port *uport, if (old_state == UART_PM_STATE_UNDEFINED) old_state = UART_PM_STATE_OFF; - if (new_state == UART_PM_STATE_ON && old_state == UART_PM_STATE_OFF) + if (new_state == UART_PM_STATE_ON && old_state == UART_PM_STATE_OFF) { + geni_icc_enable(&port->se); geni_se_resources_on(&port->se); - else if (new_state == UART_PM_STATE_OFF && - old_state == UART_PM_STATE_ON) + } else if (new_state == UART_PM_STATE_OFF && + old_state == UART_PM_STATE_ON) { geni_se_resources_off(&port->se); + geni_icc_disable(&port->se); + } } static const struct uart_ops qcom_geni_console_pops = { @@ -1337,6 +1351,17 @@ static int qcom_geni_serial_probe(struct platform_device *pdev) return -ENOMEM; } + ret = geni_icc_get(&port->se, NULL); + if (ret) + return ret; + port->se.icc_paths[GENI_TO_CORE].avg_bw = GENI_DEFAULT_BW; + port->se.icc_paths[CPU_TO_GENI].avg_bw = GENI_DEFAULT_BW; + + /* Set BW for register access */ + ret = geni_icc_set_bw(&port->se); + if (ret) + return ret; + port->name = devm_kasprintf(uport->dev, GFP_KERNEL, "qcom_geni_serial_%s%d", uart_console(uport) ? "console" : "uart", uport->line); |