summaryrefslogtreecommitdiffstats
path: root/drivers/thermal
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/thermal')
-rw-r--r--drivers/thermal/intel_pch_thermal.c60
-rw-r--r--drivers/thermal/intel_powerclamp.c9
2 files changed, 63 insertions, 6 deletions
diff --git a/drivers/thermal/intel_pch_thermal.c b/drivers/thermal/intel_pch_thermal.c
index 9b4815e81b0d..19bf2028e508 100644
--- a/drivers/thermal/intel_pch_thermal.c
+++ b/drivers/thermal/intel_pch_thermal.c
@@ -20,10 +20,13 @@
#include <linux/types.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/acpi.h>
#include <linux/thermal.h>
#include <linux/pm.h>
/* Intel PCH thermal Device IDs */
+#define PCH_THERMAL_DID_HSW_1 0x9C24 /* Haswell PCH */
+#define PCH_THERMAL_DID_HSW_2 0x8C24 /* Haswell PCH */
#define PCH_THERMAL_DID_WPT 0x9CA4 /* Wildcat Point */
#define PCH_THERMAL_DID_SKL 0x9D31 /* Skylake PCH */
@@ -66,9 +69,53 @@ struct pch_thermal_device {
unsigned long crt_temp;
int hot_trip_id;
unsigned long hot_temp;
+ int psv_trip_id;
+ unsigned long psv_temp;
bool bios_enabled;
};
+#ifdef CONFIG_ACPI
+
+/*
+ * On some platforms, there is a companion ACPI device, which adds
+ * passive trip temperature using _PSV method. There is no specific
+ * passive temperature setting in MMIO interface of this PCI device.
+ */
+static void pch_wpt_add_acpi_psv_trip(struct pch_thermal_device *ptd,
+ int *nr_trips)
+{
+ struct acpi_device *adev;
+
+ ptd->psv_trip_id = -1;
+
+ adev = ACPI_COMPANION(&ptd->pdev->dev);
+ if (adev) {
+ unsigned long long r;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(adev->handle, "_PSV", NULL,
+ &r);
+ if (ACPI_SUCCESS(status)) {
+ unsigned long trip_temp;
+
+ trip_temp = DECI_KELVIN_TO_MILLICELSIUS(r);
+ if (trip_temp) {
+ ptd->psv_temp = trip_temp;
+ ptd->psv_trip_id = *nr_trips;
+ ++(*nr_trips);
+ }
+ }
+ }
+}
+#else
+static void pch_wpt_add_acpi_psv_trip(struct pch_thermal_device *ptd,
+ int *nr_trips)
+{
+ ptd->psv_trip_id = -1;
+
+}
+#endif
+
static int pch_wpt_init(struct pch_thermal_device *ptd, int *nr_trips)
{
u8 tsel;
@@ -119,6 +166,8 @@ read_trips:
++(*nr_trips);
}
+ pch_wpt_add_acpi_psv_trip(ptd, nr_trips);
+
return 0;
}
@@ -194,6 +243,8 @@ static int pch_get_trip_type(struct thermal_zone_device *tzd, int trip,
*type = THERMAL_TRIP_CRITICAL;
else if (ptd->hot_trip_id == trip)
*type = THERMAL_TRIP_HOT;
+ else if (ptd->psv_trip_id == trip)
+ *type = THERMAL_TRIP_PASSIVE;
else
return -EINVAL;
@@ -208,6 +259,8 @@ static int pch_get_trip_temp(struct thermal_zone_device *tzd, int trip, int *tem
*temp = ptd->crt_temp;
else if (ptd->hot_trip_id == trip)
*temp = ptd->hot_temp;
+ else if (ptd->psv_trip_id == trip)
+ *temp = ptd->psv_temp;
else
return -EINVAL;
@@ -242,6 +295,11 @@ static int intel_pch_thermal_probe(struct pci_dev *pdev,
ptd->ops = &pch_dev_ops_wpt;
dev_name = "pch_skylake";
break;
+ case PCH_THERMAL_DID_HSW_1:
+ case PCH_THERMAL_DID_HSW_2:
+ ptd->ops = &pch_dev_ops_wpt;
+ dev_name = "pch_haswell";
+ break;
default:
dev_err(&pdev->dev, "unknown pch thermal device\n");
return -ENODEV;
@@ -324,6 +382,8 @@ static int intel_pch_thermal_resume(struct device *device)
static struct pci_device_id intel_pch_thermal_id[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_WPT) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_SKL) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_HSW_1) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_HSW_2) },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, intel_pch_thermal_id);
diff --git a/drivers/thermal/intel_powerclamp.c b/drivers/thermal/intel_powerclamp.c
index 6d93f1d65dba..83e697186410 100644
--- a/drivers/thermal/intel_powerclamp.c
+++ b/drivers/thermal/intel_powerclamp.c
@@ -669,20 +669,17 @@ static struct thermal_cooling_device_ops powerclamp_cooling_ops = {
.set_cur_state = powerclamp_set_cur_state,
};
-static const struct x86_cpu_id intel_powerclamp_ids[] __initconst = {
+static const struct x86_cpu_id __initconst intel_powerclamp_ids[] = {
{ X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_MWAIT },
- { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_ARAT },
- { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_NONSTOP_TSC },
- { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_CONSTANT_TSC},
{}
};
MODULE_DEVICE_TABLE(x86cpu, intel_powerclamp_ids);
static int __init powerclamp_probe(void)
{
+
if (!x86_match_cpu(intel_powerclamp_ids)) {
- pr_err("Intel powerclamp does not run on family %d model %d\n",
- boot_cpu_data.x86, boot_cpu_data.x86_model);
+ pr_err("CPU does not support MWAIT");
return -ENODEV;
}