diff options
Diffstat (limited to 'drivers/staging')
-rw-r--r-- | drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192 | 20 | ||||
-rw-r--r-- | drivers/staging/iio/TODO | 8 | ||||
-rw-r--r-- | drivers/staging/iio/accel/adis16203.c | 1 | ||||
-rw-r--r-- | drivers/staging/iio/accel/adis16240.c | 1 | ||||
-rw-r--r-- | drivers/staging/iio/adc/Kconfig | 12 | ||||
-rw-r--r-- | drivers/staging/iio/adc/Makefile | 1 | ||||
-rw-r--r-- | drivers/staging/iio/adc/ad7192.c | 1022 |
7 files changed, 3 insertions, 1062 deletions
diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192 b/drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192 deleted file mode 100644 index 1c35c507cc05..000000000000 --- a/drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192 +++ /dev/null @@ -1,20 +0,0 @@ -What: /sys/.../iio:deviceX/ac_excitation_en -KernelVersion: 3.1.0 -Contact: linux-iio@vger.kernel.org -Description: - This attribute, if available, is used to enable the AC - excitation mode found on some converters. In ac excitation mode, - the polarity of the excitation voltage is reversed on - alternate cycles, to eliminate DC errors. - -What: /sys/.../iio:deviceX/bridge_switch_en -KernelVersion: 3.1.0 -Contact: linux-iio@vger.kernel.org -Description: - This attribute, if available, is used to close or open the - bridge power down switch found on some converters. - In bridge applications, such as strain gauges and load cells, - the bridge itself consumes the majority of the current in the - system. To minimize the current consumption of the system, - the bridge can be disconnected (when it is not being used - using the bridge_switch_en attribute. diff --git a/drivers/staging/iio/TODO b/drivers/staging/iio/TODO index 1b8ebf2c1b69..4d469016a13a 100644 --- a/drivers/staging/iio/TODO +++ b/drivers/staging/iio/TODO @@ -1,10 +1,4 @@ -2018-04-15 - -All affected drivers: -Convert all uses of the old GPIO API from <linux/gpio.h> to the -GPIO descriptor API in <linux/gpio/consumer.h> and look up GPIO -lines from device tree, ACPI or board files, board files should -use <linux/gpio/machine.h>. +2020-02-25 ADI Drivers: diff --git a/drivers/staging/iio/accel/adis16203.c b/drivers/staging/iio/accel/adis16203.c index 39dfe3f7f254..fef52d9b5346 100644 --- a/drivers/staging/iio/accel/adis16203.c +++ b/drivers/staging/iio/accel/adis16203.c @@ -250,6 +250,7 @@ static const struct adis_data adis16203_data = { .diag_stat_reg = ADIS16203_DIAG_STAT, .self_test_mask = ADIS16203_MSC_CTRL_SELF_TEST_EN, + .self_test_reg = ADIS16203_MSC_CTRL, .self_test_no_autoclear = true, .timeouts = &adis16203_timeouts, diff --git a/drivers/staging/iio/accel/adis16240.c b/drivers/staging/iio/accel/adis16240.c index 39eb8364aa95..8bd35c6c56a1 100644 --- a/drivers/staging/iio/accel/adis16240.c +++ b/drivers/staging/iio/accel/adis16240.c @@ -373,6 +373,7 @@ static const struct adis_data adis16240_data = { .diag_stat_reg = ADIS16240_DIAG_STAT, .self_test_mask = ADIS16240_MSC_CTRL_SELF_TEST_EN, + .self_test_reg = ADIS16240_MSC_CTRL, .self_test_no_autoclear = true, .timeouts = &adis16240_timeouts, diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig index 31cd9a12f40f..b25f41053fac 100644 --- a/drivers/staging/iio/adc/Kconfig +++ b/drivers/staging/iio/adc/Kconfig @@ -15,18 +15,6 @@ config AD7816 To compile this driver as a module, choose M here: the module will be called ad7816. -config AD7192 - tristate "Analog Devices AD7190 AD7192 AD7193 AD7195 ADC driver" - depends on SPI - select AD_SIGMA_DELTA - help - Say yes here to build support for Analog Devices AD7190, - AD7192, AD7193 or AD7195 SPI analog to digital converters (ADC). - If unsure, say N (but it's safe to say "Y"). - - To compile this driver as a module, choose M here: the - module will be called ad7192. - config AD7280 tristate "Analog Devices AD7280A Lithium Ion Battery Monitoring System" depends on SPI diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile index 4b76769b32bc..6436a62b6278 100644 --- a/drivers/staging/iio/adc/Makefile +++ b/drivers/staging/iio/adc/Makefile @@ -4,5 +4,4 @@ # obj-$(CONFIG_AD7816) += ad7816.o -obj-$(CONFIG_AD7192) += ad7192.o obj-$(CONFIG_AD7280) += ad7280a.o diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c deleted file mode 100644 index bf3e2a9cc07f..000000000000 --- a/drivers/staging/iio/adc/ad7192.c +++ /dev/null @@ -1,1022 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * AD7190 AD7192 AD7193 AD7195 SPI ADC driver - * - * Copyright 2011-2015 Analog Devices Inc. - */ - -#include <linux/interrupt.h> -#include <linux/clk.h> -#include <linux/device.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/sysfs.h> -#include <linux/spi/spi.h> -#include <linux/regulator/consumer.h> -#include <linux/err.h> -#include <linux/sched.h> -#include <linux/delay.h> - -#include <linux/iio/iio.h> -#include <linux/iio/sysfs.h> -#include <linux/iio/buffer.h> -#include <linux/iio/trigger.h> -#include <linux/iio/trigger_consumer.h> -#include <linux/iio/triggered_buffer.h> -#include <linux/iio/adc/ad_sigma_delta.h> - -/* Registers */ -#define AD7192_REG_COMM 0 /* Communications Register (WO, 8-bit) */ -#define AD7192_REG_STAT 0 /* Status Register (RO, 8-bit) */ -#define AD7192_REG_MODE 1 /* Mode Register (RW, 24-bit */ -#define AD7192_REG_CONF 2 /* Configuration Register (RW, 24-bit) */ -#define AD7192_REG_DATA 3 /* Data Register (RO, 24/32-bit) */ -#define AD7192_REG_ID 4 /* ID Register (RO, 8-bit) */ -#define AD7192_REG_GPOCON 5 /* GPOCON Register (RO, 8-bit) */ -#define AD7192_REG_OFFSET 6 /* Offset Register (RW, 16-bit */ - /* (AD7792)/24-bit (AD7192)) */ -#define AD7192_REG_FULLSALE 7 /* Full-Scale Register */ - /* (RW, 16-bit (AD7792)/24-bit (AD7192)) */ - -/* Communications Register Bit Designations (AD7192_REG_COMM) */ -#define AD7192_COMM_WEN BIT(7) /* Write Enable */ -#define AD7192_COMM_WRITE 0 /* Write Operation */ -#define AD7192_COMM_READ BIT(6) /* Read Operation */ -#define AD7192_COMM_ADDR(x) (((x) & 0x7) << 3) /* Register Address */ -#define AD7192_COMM_CREAD BIT(2) /* Continuous Read of Data Register */ - -/* Status Register Bit Designations (AD7192_REG_STAT) */ -#define AD7192_STAT_RDY BIT(7) /* Ready */ -#define AD7192_STAT_ERR BIT(6) /* Error (Overrange, Underrange) */ -#define AD7192_STAT_NOREF BIT(5) /* Error no external reference */ -#define AD7192_STAT_PARITY BIT(4) /* Parity */ -#define AD7192_STAT_CH3 BIT(2) /* Channel 3 */ -#define AD7192_STAT_CH2 BIT(1) /* Channel 2 */ -#define AD7192_STAT_CH1 BIT(0) /* Channel 1 */ - -/* Mode Register Bit Designations (AD7192_REG_MODE) */ -#define AD7192_MODE_SEL(x) (((x) & 0x7) << 21) /* Operation Mode Select */ -#define AD7192_MODE_SEL_MASK (0x7 << 21) /* Operation Mode Select Mask */ -#define AD7192_MODE_DAT_STA BIT(20) /* Status Register transmission */ -#define AD7192_MODE_CLKSRC(x) (((x) & 0x3) << 18) /* Clock Source Select */ -#define AD7192_MODE_SINC3 BIT(15) /* SINC3 Filter Select */ -#define AD7192_MODE_ACX BIT(14) /* AC excitation enable(AD7195 only)*/ -#define AD7192_MODE_ENPAR BIT(13) /* Parity Enable */ -#define AD7192_MODE_CLKDIV BIT(12) /* Clock divide by 2 (AD7190/2 only)*/ -#define AD7192_MODE_SCYCLE BIT(11) /* Single cycle conversion */ -#define AD7192_MODE_REJ60 BIT(10) /* 50/60Hz notch filter */ -#define AD7192_MODE_RATE(x) ((x) & 0x3FF) /* Filter Update Rate Select */ - -/* Mode Register: AD7192_MODE_SEL options */ -#define AD7192_MODE_CONT 0 /* Continuous Conversion Mode */ -#define AD7192_MODE_SINGLE 1 /* Single Conversion Mode */ -#define AD7192_MODE_IDLE 2 /* Idle Mode */ -#define AD7192_MODE_PWRDN 3 /* Power-Down Mode */ -#define AD7192_MODE_CAL_INT_ZERO 4 /* Internal Zero-Scale Calibration */ -#define AD7192_MODE_CAL_INT_FULL 5 /* Internal Full-Scale Calibration */ -#define AD7192_MODE_CAL_SYS_ZERO 6 /* System Zero-Scale Calibration */ -#define AD7192_MODE_CAL_SYS_FULL 7 /* System Full-Scale Calibration */ - -/* Mode Register: AD7192_MODE_CLKSRC options */ -#define AD7192_CLK_EXT_MCLK1_2 0 /* External 4.92 MHz Clock connected*/ - /* from MCLK1 to MCLK2 */ -#define AD7192_CLK_EXT_MCLK2 1 /* External Clock applied to MCLK2 */ -#define AD7192_CLK_INT 2 /* Internal 4.92 MHz Clock not */ - /* available at the MCLK2 pin */ -#define AD7192_CLK_INT_CO 3 /* Internal 4.92 MHz Clock available*/ - /* at the MCLK2 pin */ - -/* Configuration Register Bit Designations (AD7192_REG_CONF) */ - -#define AD7192_CONF_CHOP BIT(23) /* CHOP enable */ -#define AD7192_CONF_REFSEL BIT(20) /* REFIN1/REFIN2 Reference Select */ -#define AD7192_CONF_CHAN(x) ((x) << 8) /* Channel select */ -#define AD7192_CONF_CHAN_MASK (0x7FF << 8) /* Channel select mask */ -#define AD7192_CONF_BURN BIT(7) /* Burnout current enable */ -#define AD7192_CONF_REFDET BIT(6) /* Reference detect enable */ -#define AD7192_CONF_BUF BIT(4) /* Buffered Mode Enable */ -#define AD7192_CONF_UNIPOLAR BIT(3) /* Unipolar/Bipolar Enable */ -#define AD7192_CONF_GAIN(x) ((x) & 0x7) /* Gain Select */ - -#define AD7192_CH_AIN1P_AIN2M BIT(0) /* AIN1(+) - AIN2(-) */ -#define AD7192_CH_AIN3P_AIN4M BIT(1) /* AIN3(+) - AIN4(-) */ -#define AD7192_CH_TEMP BIT(2) /* Temp Sensor */ -#define AD7192_CH_AIN2P_AIN2M BIT(3) /* AIN2(+) - AIN2(-) */ -#define AD7192_CH_AIN1 BIT(4) /* AIN1 - AINCOM */ -#define AD7192_CH_AIN2 BIT(5) /* AIN2 - AINCOM */ -#define AD7192_CH_AIN3 BIT(6) /* AIN3 - AINCOM */ -#define AD7192_CH_AIN4 BIT(7) /* AIN4 - AINCOM */ - -#define AD7193_CH_AIN1P_AIN2M 0x001 /* AIN1(+) - AIN2(-) */ -#define AD7193_CH_AIN3P_AIN4M 0x002 /* AIN3(+) - AIN4(-) */ -#define AD7193_CH_AIN5P_AIN6M 0x004 /* AIN5(+) - AIN6(-) */ -#define AD7193_CH_AIN7P_AIN8M 0x008 /* AIN7(+) - AIN8(-) */ -#define AD7193_CH_TEMP 0x100 /* Temp senseor */ -#define AD7193_CH_AIN2P_AIN2M 0x200 /* AIN2(+) - AIN2(-) */ -#define AD7193_CH_AIN1 0x401 /* AIN1 - AINCOM */ -#define AD7193_CH_AIN2 0x402 /* AIN2 - AINCOM */ -#define AD7193_CH_AIN3 0x404 /* AIN3 - AINCOM */ -#define AD7193_CH_AIN4 0x408 /* AIN4 - AINCOM */ -#define AD7193_CH_AIN5 0x410 /* AIN5 - AINCOM */ -#define AD7193_CH_AIN6 0x420 /* AIN6 - AINCOM */ -#define AD7193_CH_AIN7 0x440 /* AIN7 - AINCOM */ -#define AD7193_CH_AIN8 0x480 /* AIN7 - AINCOM */ -#define AD7193_CH_AINCOM 0x600 /* AINCOM - AINCOM */ - -/* ID Register Bit Designations (AD7192_REG_ID) */ -#define ID_AD7190 0x4 -#define ID_AD7192 0x0 -#define ID_AD7193 0x2 -#define ID_AD7195 0x6 -#define AD7192_ID_MASK 0x0F - -/* GPOCON Register Bit Designations (AD7192_REG_GPOCON) */ -#define AD7192_GPOCON_BPDSW BIT(6) /* Bridge power-down switch enable */ -#define AD7192_GPOCON_GP32EN BIT(5) /* Digital Output P3 and P2 enable */ -#define AD7192_GPOCON_GP10EN BIT(4) /* Digital Output P1 and P0 enable */ -#define AD7192_GPOCON_P3DAT BIT(3) /* P3 state */ -#define AD7192_GPOCON_P2DAT BIT(2) /* P2 state */ -#define AD7192_GPOCON_P1DAT BIT(1) /* P1 state */ -#define AD7192_GPOCON_P0DAT BIT(0) /* P0 state */ - -#define AD7192_EXT_FREQ_MHZ_MIN 2457600 -#define AD7192_EXT_FREQ_MHZ_MAX 5120000 -#define AD7192_INT_FREQ_MHZ 4915200 - -#define AD7192_NO_SYNC_FILTER 1 -#define AD7192_SYNC3_FILTER 3 -#define AD7192_SYNC4_FILTER 4 - -/* NOTE: - * The AD7190/2/5 features a dual use data out ready DOUT/RDY output. - * In order to avoid contentions on the SPI bus, it's therefore necessary - * to use spi bus locking. - * - * The DOUT/RDY output must also be wired to an interrupt capable GPIO. - */ - -enum { - AD7192_SYSCALIB_ZERO_SCALE, - AD7192_SYSCALIB_FULL_SCALE, -}; - -struct ad7192_state { - struct regulator *avdd; - struct regulator *dvdd; - struct clk *mclk; - u16 int_vref_mv; - u32 fclk; - u32 f_order; - u32 mode; - u32 conf; - u32 scale_avail[8][2]; - u8 gpocon; - u8 devid; - u8 clock_sel; - struct mutex lock; /* protect sensor state */ - u8 syscalib_mode[8]; - - struct ad_sigma_delta sd; -}; - -static const char * const ad7192_syscalib_modes[] = { - [AD7192_SYSCALIB_ZERO_SCALE] = "zero_scale", - [AD7192_SYSCALIB_FULL_SCALE] = "full_scale", -}; - -static int ad7192_set_syscalib_mode(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, - unsigned int mode) -{ - struct ad7192_state *st = iio_priv(indio_dev); - - st->syscalib_mode[chan->channel] = mode; - - return 0; -} - -static int ad7192_get_syscalib_mode(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan) -{ - struct ad7192_state *st = iio_priv(indio_dev); - - return st->syscalib_mode[chan->channel]; -} - -static ssize_t ad7192_write_syscalib(struct iio_dev *indio_dev, - uintptr_t private, - const struct iio_chan_spec *chan, - const char *buf, size_t len) -{ - struct ad7192_state *st = iio_priv(indio_dev); - bool sys_calib; - int ret, temp; - - ret = strtobool(buf, &sys_calib); - if (ret) - return ret; - - temp = st->syscalib_mode[chan->channel]; - if (sys_calib) { - if (temp == AD7192_SYSCALIB_ZERO_SCALE) - ret = ad_sd_calibrate(&st->sd, AD7192_MODE_CAL_SYS_ZERO, - chan->address); - else - ret = ad_sd_calibrate(&st->sd, AD7192_MODE_CAL_SYS_FULL, - chan->address); - } - - return ret ? ret : len; -} - -static const struct iio_enum ad7192_syscalib_mode_enum = { - .items = ad7192_syscalib_modes, - .num_items = ARRAY_SIZE(ad7192_syscalib_modes), - .set = ad7192_set_syscalib_mode, - .get = ad7192_get_syscalib_mode -}; - -static const struct iio_chan_spec_ext_info ad7192_calibsys_ext_info[] = { - { - .name = "sys_calibration", - .write = ad7192_write_syscalib, - .shared = IIO_SEPARATE, - }, - IIO_ENUM("sys_calibration_mode", IIO_SEPARATE, - &ad7192_syscalib_mode_enum), - IIO_ENUM_AVAILABLE("sys_calibration_mode", &ad7192_syscalib_mode_enum), - {} -}; - -static struct ad7192_state *ad_sigma_delta_to_ad7192(struct ad_sigma_delta *sd) -{ - return container_of(sd, struct ad7192_state, sd); -} - -static int ad7192_set_channel(struct ad_sigma_delta *sd, unsigned int channel) -{ - struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd); - - st->conf &= ~AD7192_CONF_CHAN_MASK; - st->conf |= AD7192_CONF_CHAN(channel); - - return ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf); -} - -static int ad7192_set_mode(struct ad_sigma_delta *sd, - enum ad_sigma_delta_mode mode) -{ - struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd); - - st->mode &= ~AD7192_MODE_SEL_MASK; - st->mode |= AD7192_MODE_SEL(mode); - - return ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); -} - -static const struct ad_sigma_delta_info ad7192_sigma_delta_info = { - .set_channel = ad7192_set_channel, - .set_mode = ad7192_set_mode, - .has_registers = true, - .addr_shift = 3, - .read_mask = BIT(6), -}; - -static const struct ad_sd_calib_data ad7192_calib_arr[8] = { - {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN1}, - {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN1}, - {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN2}, - {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN2}, - {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN3}, - {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN3}, - {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN4}, - {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN4} -}; - -static int ad7192_calibrate_all(struct ad7192_state *st) -{ - return ad_sd_calibrate_all(&st->sd, ad7192_calib_arr, - ARRAY_SIZE(ad7192_calib_arr)); -} - -static inline bool ad7192_valid_external_frequency(u32 freq) -{ - return (freq >= AD7192_EXT_FREQ_MHZ_MIN && - freq <= AD7192_EXT_FREQ_MHZ_MAX); -} - -static int ad7192_of_clock_select(struct ad7192_state *st) -{ - struct device_node *np = st->sd.spi->dev.of_node; - unsigned int clock_sel; - - clock_sel = AD7192_CLK_INT; - - /* use internal clock */ - if (PTR_ERR(st->mclk) == -ENOENT) { - if (of_property_read_bool(np, "adi,int-clock-output-enable")) - clock_sel = AD7192_CLK_INT_CO; - } else { - if (of_property_read_bool(np, "adi,clock-xtal")) - clock_sel = AD7192_CLK_EXT_MCLK1_2; - else - clock_sel = AD7192_CLK_EXT_MCLK2; - } - - return clock_sel; -} - -static int ad7192_setup(struct ad7192_state *st, struct device_node *np) -{ - struct iio_dev *indio_dev = spi_get_drvdata(st->sd.spi); - bool rej60_en, refin2_en; - bool buf_en, bipolar, burnout_curr_en; - unsigned long long scale_uv; - int i, ret, id; - - /* reset the serial interface */ - ret = ad_sd_reset(&st->sd, 48); - if (ret < 0) - return ret; - usleep_range(500, 1000); /* Wait for at least 500us */ - - /* write/read test for device presence */ - ret = ad_sd_read_reg(&st->sd, AD7192_REG_ID, 1, &id); - if (ret) - return ret; - - id &= AD7192_ID_MASK; - - if (id != st->devid) - dev_warn(&st->sd.spi->dev, "device ID query failed (0x%X)\n", - id); - - st->mode = AD7192_MODE_SEL(AD7192_MODE_IDLE) | - AD7192_MODE_CLKSRC(st->clock_sel) | - AD7192_MODE_RATE(480); - - st->conf = AD7192_CONF_GAIN(0); - - rej60_en = of_property_read_bool(np, "adi,rejection-60-Hz-enable"); - if (rej60_en) - st->mode |= AD7192_MODE_REJ60; - - refin2_en = of_property_read_bool(np, "adi,refin2-pins-enable"); - if (refin2_en && st->devid != ID_AD7195) - st->conf |= AD7192_CONF_REFSEL; - - st->conf &= ~AD7192_CONF_CHOP; - st->f_order = AD7192_NO_SYNC_FILTER; - - buf_en = of_property_read_bool(np, "adi,buffer-enable"); - if (buf_en) - st->conf |= AD7192_CONF_BUF; - - bipolar = of_property_read_bool(np, "bipolar"); - if (!bipolar) - st->conf |= AD7192_CONF_UNIPOLAR; - - burnout_curr_en = of_property_read_bool(np, - "adi,burnout-currents-enable"); - if (burnout_curr_en && buf_en) { - st->conf |= AD7192_CONF_BURN; - } else if (burnout_curr_en) { - dev_warn(&st->sd.spi->dev, - "Can't enable burnout currents: see CHOP or buffer\n"); - } - - ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); - if (ret) - return ret; - - ret = ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf); - if (ret) - return ret; - - ret = ad7192_calibrate_all(st); - if (ret) - return ret; - - /* Populate available ADC input ranges */ - for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) { - scale_uv = ((u64)st->int_vref_mv * 100000000) - >> (indio_dev->channels[0].scan_type.realbits - - ((st->conf & AD7192_CONF_UNIPOLAR) ? 0 : 1)); - scale_uv >>= i; - - st->scale_avail[i][1] = do_div(scale_uv, 100000000) * 10; - st->scale_avail[i][0] = scale_uv; - } - - return 0; -} - -static ssize_t ad7192_show_ac_excitation(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ad7192_state *st = iio_priv(indio_dev); - - return sprintf(buf, "%d\n", !!(st->mode & AD7192_MODE_ACX)); -} - -static ssize_t ad7192_show_bridge_switch(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ad7192_state *st = iio_priv(indio_dev); - - return sprintf(buf, "%d\n", !!(st->gpocon & AD7192_GPOCON_BPDSW)); -} - -static ssize_t ad7192_set(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ad7192_state *st = iio_priv(indio_dev); - struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); - int ret; - bool val; - - ret = strtobool(buf, &val); - if (ret < 0) - return ret; - - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - - switch ((u32)this_attr->address) { - case AD7192_REG_GPOCON: - if (val) - st->gpocon |= AD7192_GPOCON_BPDSW; - else - st->gpocon &= ~AD7192_GPOCON_BPDSW; - - ad_sd_write_reg(&st->sd, AD7192_REG_GPOCON, 1, st->gpocon); - break; - case AD7192_REG_MODE: - if (val) - st->mode |= AD7192_MODE_ACX; - else - st->mode &= ~AD7192_MODE_ACX; - - ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); - break; - default: - ret = -EINVAL; - } - - iio_device_release_direct_mode(indio_dev); - - return ret ? ret : len; -} - -static void ad7192_get_available_filter_freq(struct ad7192_state *st, - int *freq) -{ - unsigned int fadc; - - /* Formulas for filter at page 25 of the datasheet */ - fadc = DIV_ROUND_CLOSEST(st->fclk, - AD7192_SYNC4_FILTER * AD7192_MODE_RATE(st->mode)); - freq[0] = DIV_ROUND_CLOSEST(fadc * 240, 1024); - - fadc = DIV_ROUND_CLOSEST(st->fclk, - AD7192_SYNC3_FILTER * AD7192_MODE_RATE(st->mode)); - freq[1] = DIV_ROUND_CLOSEST(fadc * 240, 1024); - - fadc = DIV_ROUND_CLOSEST(st->fclk, AD7192_MODE_RATE(st->mode)); - freq[2] = DIV_ROUND_CLOSEST(fadc * 230, 1024); - freq[3] = DIV_ROUND_CLOSEST(fadc * 272, 1024); -} - -static ssize_t ad7192_show_filter_avail(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct ad7192_state *st = iio_priv(indio_dev); - unsigned int freq_avail[4], i; - size_t len = 0; - - ad7192_get_available_filter_freq(st, freq_avail); - - for (i = 0; i < ARRAY_SIZE(freq_avail); i++) - len += scnprintf(buf + len, PAGE_SIZE - len, - "%d.%d ", freq_avail[i] / 1000, - freq_avail[i] % 1000); - - buf[len - 1] = '\n'; - - return len; -} - -static IIO_DEVICE_ATTR(filter_low_pass_3db_frequency_available, - 0444, ad7192_show_filter_avail, NULL, 0); - -static IIO_DEVICE_ATTR(bridge_switch_en, 0644, - ad7192_show_bridge_switch, ad7192_set, - AD7192_REG_GPOCON); - -static IIO_DEVICE_ATTR(ac_excitation_en, 0644, - ad7192_show_ac_excitation, ad7192_set, - AD7192_REG_MODE); - -static struct attribute *ad7192_attributes[] = { - &iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr, - &iio_dev_attr_bridge_switch_en.dev_attr.attr, - &iio_dev_attr_ac_excitation_en.dev_attr.attr, - NULL -}; - -static const struct attribute_group ad7192_attribute_group = { - .attrs = ad7192_attributes, -}; - -static struct attribute *ad7195_attributes[] = { - &iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr, - &iio_dev_attr_bridge_switch_en.dev_attr.attr, - NULL -}; - -static const struct attribute_group ad7195_attribute_group = { - .attrs = ad7195_attributes, -}; - -static unsigned int ad7192_get_temp_scale(bool unipolar) -{ - return unipolar ? 2815 * 2 : 2815; -} - -static int ad7192_set_3db_filter_freq(struct ad7192_state *st, - int val, int val2) -{ - int freq_avail[4], i, ret, freq; - unsigned int diff_new, diff_old; - int idx = 0; - - diff_old = U32_MAX; - freq = val * 1000 + val2; - - ad7192_get_available_filter_freq(st, freq_avail); - - for (i = 0; i < ARRAY_SIZE(freq_avail); i++) { - diff_new = abs(freq - freq_avail[i]); - if (diff_new < diff_old) { - diff_old = diff_new; - idx = i; - } - } - - switch (idx) { - case 0: - st->f_order = AD7192_SYNC4_FILTER; - st->mode &= ~AD7192_MODE_SINC3; - - st->conf |= AD7192_CONF_CHOP; - break; - case 1: - st->f_order = AD7192_SYNC3_FILTER; - st->mode |= AD7192_MODE_SINC3; - - st->conf |= AD7192_CONF_CHOP; - break; - case 2: - st->f_order = AD7192_NO_SYNC_FILTER; - st->mode &= ~AD7192_MODE_SINC3; - - st->conf &= ~AD7192_CONF_CHOP; - break; - case 3: - st->f_order = AD7192_NO_SYNC_FILTER; - st->mode |= AD7192_MODE_SINC3; - - st->conf &= ~AD7192_CONF_CHOP; - break; - } - - ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); - if (ret < 0) - return ret; - - return ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf); -} - -static int ad7192_get_3db_filter_freq(struct ad7192_state *st) -{ - unsigned int fadc; - - fadc = DIV_ROUND_CLOSEST(st->fclk, - st->f_order * AD7192_MODE_RATE(st->mode)); - - if (st->conf & AD7192_CONF_CHOP) - return DIV_ROUND_CLOSEST(fadc * 240, 1024); - if (st->mode & AD7192_MODE_SINC3) - return DIV_ROUND_CLOSEST(fadc * 272, 1024); - else - return DIV_ROUND_CLOSEST(fadc * 230, 1024); -} - -static int ad7192_read_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int *val, - int *val2, - long m) -{ - struct ad7192_state *st = iio_priv(indio_dev); - bool unipolar = !!(st->conf & AD7192_CONF_UNIPOLAR); - - switch (m) { - case IIO_CHAN_INFO_RAW: - return ad_sigma_delta_single_conversion(indio_dev, chan, val); - case IIO_CHAN_INFO_SCALE: - switch (chan->type) { - case IIO_VOLTAGE: - mutex_lock(&st->lock); - *val = st->scale_avail[AD7192_CONF_GAIN(st->conf)][0]; - *val2 = st->scale_avail[AD7192_CONF_GAIN(st->conf)][1]; - mutex_unlock(&st->lock); - return IIO_VAL_INT_PLUS_NANO; - case IIO_TEMP: - *val = 0; - *val2 = 1000000000 / ad7192_get_temp_scale(unipolar); - return IIO_VAL_INT_PLUS_NANO; - default: - return -EINVAL; - } - case IIO_CHAN_INFO_OFFSET: - if (!unipolar) - *val = -(1 << (chan->scan_type.realbits - 1)); - else - *val = 0; - /* Kelvin to Celsius */ - if (chan->type == IIO_TEMP) - *val -= 273 * ad7192_get_temp_scale(unipolar); - return IIO_VAL_INT; - case IIO_CHAN_INFO_SAMP_FREQ: - *val = st->fclk / - (st->f_order * 1024 * AD7192_MODE_RATE(st->mode)); - return IIO_VAL_INT; - case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: - *val = ad7192_get_3db_filter_freq(st); - *val2 = 1000; - return IIO_VAL_FRACTIONAL; - } - - return -EINVAL; -} - -static int ad7192_write_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int val, - int val2, - long mask) -{ - struct ad7192_state *st = iio_priv(indio_dev); - int ret, i, div; - unsigned int tmp; - - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - - switch (mask) { - case IIO_CHAN_INFO_SCALE: - ret = -EINVAL; - mutex_lock(&st->lock); - for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) - if (val2 == st->scale_avail[i][1]) { - ret = 0; - tmp = st->conf; - st->conf &= ~AD7192_CONF_GAIN(-1); - st->conf |= AD7192_CONF_GAIN(i); - if (tmp == st->conf) - break; - ad_sd_write_reg(&st->sd, AD7192_REG_CONF, - 3, st->conf); - ad7192_calibrate_all(st); - break; - } - mutex_unlock(&st->lock); - break; - case IIO_CHAN_INFO_SAMP_FREQ: - if (!val) { - ret = -EINVAL; - break; - } - - div = st->fclk / (val * st->f_order * 1024); - if (div < 1 || div > 1023) { - ret = -EINVAL; - break; - } - - st->mode &= ~AD7192_MODE_RATE(-1); - st->mode |= AD7192_MODE_RATE(div); - ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); - break; - case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: - ret = ad7192_set_3db_filter_freq(st, val, val2 / 1000); - break; - default: - ret = -EINVAL; - } - - iio_device_release_direct_mode(indio_dev); - - return ret; -} - -static int ad7192_write_raw_get_fmt(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - long mask) -{ - switch (mask) { - case IIO_CHAN_INFO_SCALE: - return IIO_VAL_INT_PLUS_NANO; - case IIO_CHAN_INFO_SAMP_FREQ: - return IIO_VAL_INT; - case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: - return IIO_VAL_INT_PLUS_MICRO; - default: - return -EINVAL; - } -} - -static int ad7192_read_avail(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - const int **vals, int *type, int *length, - long mask) -{ - struct ad7192_state *st = iio_priv(indio_dev); - - switch (mask) { - case IIO_CHAN_INFO_SCALE: - *vals = (int *)st->scale_avail; - *type = IIO_VAL_INT_PLUS_NANO; - /* Values are stored in a 2D matrix */ - *length = ARRAY_SIZE(st->scale_avail) * 2; - - return IIO_AVAIL_LIST; - } - - return -EINVAL; -} - -static const struct iio_info ad7192_info = { - .read_raw = ad7192_read_raw, - .write_raw = ad7192_write_raw, - .write_raw_get_fmt = ad7192_write_raw_get_fmt, - .read_avail = ad7192_read_avail, - .attrs = &ad7192_attribute_group, - .validate_trigger = ad_sd_validate_trigger, -}; - -static const struct iio_info ad7195_info = { - .read_raw = ad7192_read_raw, - .write_raw = ad7192_write_raw, - .write_raw_get_fmt = ad7192_write_raw_get_fmt, - .read_avail = ad7192_read_avail, - .attrs = &ad7195_attribute_group, - .validate_trigger = ad_sd_validate_trigger, -}; - -static const struct iio_chan_spec ad7192_channels[] = { - AD_SD_DIFF_CHANNEL(0, 1, 2, AD7192_CH_AIN1P_AIN2M, 24, 32, 0), - AD_SD_DIFF_CHANNEL(1, 3, 4, AD7192_CH_AIN3P_AIN4M, 24, 32, 0), - AD_SD_TEMP_CHANNEL(2, AD7192_CH_TEMP, 24, 32, 0), - AD_SD_SHORTED_CHANNEL(3, 2, AD7192_CH_AIN2P_AIN2M, 24, 32, 0), - AD_SD_CHANNEL(4, 1, AD7192_CH_AIN1, 24, 32, 0), - AD_SD_CHANNEL(5, 2, AD7192_CH_AIN2, 24, 32, 0), - AD_SD_CHANNEL(6, 3, AD7192_CH_AIN3, 24, 32, 0), - AD_SD_CHANNEL(7, 4, AD7192_CH_AIN4, 24, 32, 0), - IIO_CHAN_SOFT_TIMESTAMP(8), -}; - -static const struct iio_chan_spec ad7193_channels[] = { - AD_SD_DIFF_CHANNEL(0, 1, 2, AD7193_CH_AIN1P_AIN2M, 24, 32, 0), - AD_SD_DIFF_CHANNEL(1, 3, 4, AD7193_CH_AIN3P_AIN4M, 24, 32, 0), - AD_SD_DIFF_CHANNEL(2, 5, 6, AD7193_CH_AIN5P_AIN6M, 24, 32, 0), - AD_SD_DIFF_CHANNEL(3, 7, 8, AD7193_CH_AIN7P_AIN8M, 24, 32, 0), - AD_SD_TEMP_CHANNEL(4, AD7193_CH_TEMP, 24, 32, 0), - AD_SD_SHORTED_CHANNEL(5, 2, AD7193_CH_AIN2P_AIN2M, 24, 32, 0), - AD_SD_CHANNEL(6, 1, AD7193_CH_AIN1, 24, 32, 0), - AD_SD_CHANNEL(7, 2, AD7193_CH_AIN2, 24, 32, 0), - AD_SD_CHANNEL(8, 3, AD7193_CH_AIN3, 24, 32, 0), - AD_SD_CHANNEL(9, 4, AD7193_CH_AIN4, 24, 32, 0), - AD_SD_CHANNEL(10, 5, AD7193_CH_AIN5, 24, 32, 0), - AD_SD_CHANNEL(11, 6, AD7193_CH_AIN6, 24, 32, 0), - AD_SD_CHANNEL(12, 7, AD7193_CH_AIN7, 24, 32, 0), - AD_SD_CHANNEL(13, 8, AD7193_CH_AIN8, 24, 32, 0), - IIO_CHAN_SOFT_TIMESTAMP(14), -}; - -static int ad7192_channels_config(struct iio_dev *indio_dev) -{ - struct ad7192_state *st = iio_priv(indio_dev); - const struct iio_chan_spec *channels; - struct iio_chan_spec *chan; - int i; - - switch (st->devid) { - case ID_AD7193: - channels = ad7193_channels; - indio_dev->num_channels = ARRAY_SIZE(ad7193_channels); - break; - default: - channels = ad7192_channels; - indio_dev->num_channels = ARRAY_SIZE(ad7192_channels); - break; - } - - chan = devm_kcalloc(indio_dev->dev.parent, indio_dev->num_channels, - sizeof(*chan), GFP_KERNEL); - if (!chan) - return -ENOMEM; - - indio_dev->channels = chan; - - for (i = 0; i < indio_dev->num_channels; i++) { - *chan = channels[i]; - chan->info_mask_shared_by_all |= - BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY); - if (chan->type != IIO_TEMP) { - chan->info_mask_shared_by_type_available |= - BIT(IIO_CHAN_INFO_SCALE); - chan->ext_info = ad7192_calibsys_ext_info; - } - chan++; - } - - return 0; -} - -static int ad7192_probe(struct spi_device *spi) -{ - struct ad7192_state *st; - struct iio_dev *indio_dev; - int ret, voltage_uv = 0; - - if (!spi->irq) { - dev_err(&spi->dev, "no IRQ?\n"); - return -ENODEV; - } - - indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); - if (!indio_dev) - return -ENOMEM; - - st = iio_priv(indio_dev); - - mutex_init(&st->lock); - - st->avdd = devm_regulator_get(&spi->dev, "avdd"); - if (IS_ERR(st->avdd)) - return PTR_ERR(st->avdd); - - ret = regulator_enable(st->avdd); - if (ret) { - dev_err(&spi->dev, "Failed to enable specified AVdd supply\n"); - return ret; - } - - st->dvdd = devm_regulator_get(&spi->dev, "dvdd"); - if (IS_ERR(st->dvdd)) { - ret = PTR_ERR(st->dvdd); - goto error_disable_avdd; - } - - ret = regulator_enable(st->dvdd); - if (ret) { - dev_err(&spi->dev, "Failed to enable specified DVdd supply\n"); - goto error_disable_avdd; - } - - voltage_uv = regulator_get_voltage(st->avdd); - - if (voltage_uv) - st->int_vref_mv = voltage_uv / 1000; - else - dev_err(&spi->dev, "Device tree error, reference voltage undefined\n"); - - spi_set_drvdata(spi, indio_dev); - st->devid = spi_get_device_id(spi)->driver_data; - indio_dev->dev.parent = &spi->dev; - indio_dev->name = spi_get_device_id(spi)->name; - indio_dev->modes = INDIO_DIRECT_MODE; - - ret = ad7192_channels_config(indio_dev); - if (ret < 0) - goto error_disable_dvdd; - - if (st->devid == ID_AD7195) - indio_dev->info = &ad7195_info; - else - indio_dev->info = &ad7192_info; - - ad_sd_init(&st->sd, indio_dev, spi, &ad7192_sigma_delta_info); - - ret = ad_sd_setup_buffer_and_trigger(indio_dev); - if (ret) - goto error_disable_dvdd; - - st->fclk = AD7192_INT_FREQ_MHZ; - - st->mclk = devm_clk_get(&st->sd.spi->dev, "mclk"); - if (IS_ERR(st->mclk) && PTR_ERR(st->mclk) != -ENOENT) { - ret = PTR_ERR(st->mclk); - goto error_remove_trigger; - } - - st->clock_sel = ad7192_of_clock_select(st); - - if (st->clock_sel == AD7192_CLK_EXT_MCLK1_2 || - st->clock_sel == AD7192_CLK_EXT_MCLK2) { - ret = clk_prepare_enable(st->mclk); - if (ret < 0) - goto error_remove_trigger; - - st->fclk = clk_get_rate(st->mclk); - if (!ad71 |