summaryrefslogtreecommitdiffstats
path: root/drivers/regulator
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/regulator')
-rw-r--r--drivers/regulator/axp20x-regulator.c12
-rw-r--r--drivers/regulator/core.c2
-rw-r--r--drivers/regulator/stw481x-vmmc.c3
-rw-r--r--drivers/regulator/tps65086-regulator.c54
4 files changed, 41 insertions, 30 deletions
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 54382ef902c6..e6a512ebeae2 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -337,10 +337,18 @@ static const struct regulator_desc axp809_regulators[] = {
AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)),
AXP_DESC(AXP809, ELDO3, "eldo3", "eldoin", 700, 3300, 100,
AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)),
- AXP_DESC_IO(AXP809, LDO_IO0, "ldo_io0", "ips", 700, 3300, 100,
+ /*
+ * Note the datasheet only guarantees reliable operation up to
+ * 3.3V, this needs to be enforced via dts provided constraints
+ */
+ AXP_DESC_IO(AXP809, LDO_IO0, "ldo_io0", "ips", 700, 3800, 100,
AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07,
AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
- AXP_DESC_IO(AXP809, LDO_IO1, "ldo_io1", "ips", 700, 3300, 100,
+ /*
+ * Note the datasheet only guarantees reliable operation up to
+ * 3.3V, this needs to be enforced via dts provided constraints
+ */
+ AXP_DESC_IO(AXP809, LDO_IO1, "ldo_io1", "ips", 700, 3800, 100,
AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07,
AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
AXP_DESC_FIXED(AXP809, RTC_LDO, "rtc_ldo", "ips", 1800),
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index cf23b1e2ac4c..ee13c47addf1 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2755,7 +2755,7 @@ static int _regulator_set_voltage_time(struct regulator_dev *rdev,
ramp_delay = rdev->desc->ramp_delay;
if (ramp_delay == 0) {
- rdev_warn(rdev, "ramp_delay not set\n");
+ rdev_dbg(rdev, "ramp_delay not set\n");
return 0;
}
diff --git a/drivers/regulator/stw481x-vmmc.c b/drivers/regulator/stw481x-vmmc.c
index 7d2ae3e9e942..342f5da79975 100644
--- a/drivers/regulator/stw481x-vmmc.c
+++ b/drivers/regulator/stw481x-vmmc.c
@@ -47,7 +47,8 @@ static struct regulator_desc vmmc_regulator = {
.volt_table = stw481x_vmmc_voltages,
.enable_time = 200, /* FIXME: look this up */
.enable_reg = STW_CONF1,
- .enable_mask = STW_CONF1_PDN_VMMC,
+ .enable_mask = STW_CONF1_PDN_VMMC | STW_CONF1_MMC_LS_STATUS,
+ .enable_val = STW_CONF1_PDN_VMMC,
.vsel_reg = STW_CONF1,
.vsel_mask = STW_CONF1_VMMC_MASK,
};
diff --git a/drivers/regulator/tps65086-regulator.c b/drivers/regulator/tps65086-regulator.c
index 33f389d583ef..caf174ffa316 100644
--- a/drivers/regulator/tps65086-regulator.c
+++ b/drivers/regulator/tps65086-regulator.c
@@ -71,18 +71,17 @@ struct tps65086_regulator {
unsigned int decay_mask;
};
-static const struct regulator_linear_range tps65086_buck126_10mv_ranges[] = {
+static const struct regulator_linear_range tps65086_10mv_ranges[] = {
REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0),
REGULATOR_LINEAR_RANGE(410000, 0x1, 0x7F, 10000),
};
static const struct regulator_linear_range tps65086_buck126_25mv_ranges[] = {
- REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0),
- REGULATOR_LINEAR_RANGE(1000000, 0x1, 0x18, 0),
+ REGULATOR_LINEAR_RANGE(1000000, 0x0, 0x18, 0),
REGULATOR_LINEAR_RANGE(1025000, 0x19, 0x7F, 25000),
};
-static const struct regulator_linear_range tps65086_buck345_ranges[] = {
+static const struct regulator_linear_range tps65086_buck345_25mv_ranges[] = {
REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0),
REGULATOR_LINEAR_RANGE(425000, 0x1, 0x7F, 25000),
};
@@ -125,27 +124,27 @@ static int tps65086_of_parse_cb(struct device_node *dev,
static struct tps65086_regulator regulators[] = {
TPS65086_REGULATOR("BUCK1", "buck1", BUCK1, 0x80, TPS65086_BUCK1CTRL,
BUCK_VID_MASK, TPS65086_BUCK123CTRL, BIT(0),
- tps65086_buck126_10mv_ranges, TPS65086_BUCK1CTRL,
+ tps65086_10mv_ranges, TPS65086_BUCK1CTRL,
BIT(0)),
TPS65086_REGULATOR("BUCK2", "buck2", BUCK2, 0x80, TPS65086_BUCK2CTRL,
BUCK_VID_MASK, TPS65086_BUCK123CTRL, BIT(1),
- tps65086_buck126_10mv_ranges, TPS65086_BUCK2CTRL,
+ tps65086_10mv_ranges, TPS65086_BUCK2CTRL,
BIT(0)),
TPS65086_REGULATOR("BUCK3", "buck3", BUCK3, 0x80, TPS65086_BUCK3VID,
BUCK_VID_MASK, TPS65086_BUCK123CTRL, BIT(2),
- tps65086_buck345_ranges, TPS65086_BUCK3DECAY,
+ tps65086_10mv_ranges, TPS65086_BUCK3DECAY,
BIT(0)),
TPS65086_REGULATOR("BUCK4", "buck4", BUCK4, 0x80, TPS65086_BUCK4VID,
BUCK_VID_MASK, TPS65086_BUCK4CTRL, BIT(0),
- tps65086_buck345_ranges, TPS65086_BUCK4VID,
+ tps65086_10mv_ranges, TPS65086_BUCK4VID,
BIT(0)),
TPS65086_REGULATOR("BUCK5", "buck5", BUCK5, 0x80, TPS65086_BUCK5VID,
BUCK_VID_MASK, TPS65086_BUCK5CTRL, BIT(0),
- tps65086_buck345_ranges, TPS65086_BUCK5CTRL,
+ tps65086_10mv_ranges, TPS65086_BUCK5CTRL,
BIT(0)),
TPS65086_REGULATOR("BUCK6", "buck6", BUCK6, 0x80, TPS65086_BUCK6VID,
BUCK_VID_MASK, TPS65086_BUCK6CTRL, BIT(0),
- tps65086_buck126_10mv_ranges, TPS65086_BUCK6CTRL,
+ tps65086_10mv_ranges, TPS65086_BUCK6CTRL,
BIT(0)),
TPS65086_REGULATOR("LDOA1", "ldoa1", LDOA1, 0xF, TPS65086_LDOA1CTRL,
VDOA1_VID_MASK, TPS65086_LDOA1CTRL, BIT(0),
@@ -162,18 +161,6 @@ static struct tps65086_regulator regulators[] = {
TPS65086_SWITCH("VTT", "vtt", VTT, TPS65086_SWVTT_EN, BIT(4)),
};
-static inline bool has_25mv_mode(int id)
-{
- switch (id) {
- case BUCK1:
- case BUCK2:
- case BUCK6:
- return true;
- default:
- return false;
- }
-}
-
static int tps65086_of_parse_cb(struct device_node *dev,
const struct regulator_desc *desc,
struct regulator_config *config)
@@ -181,12 +168,27 @@ static int tps65086_of_parse_cb(struct device_node *dev,
int ret;
/* Check for 25mV step mode */
- if (has_25mv_mode(desc->id) &&
- of_property_read_bool(config->of_node, "ti,regulator-step-size-25mv")) {
- regulators[desc->id].desc.linear_ranges =
+ if (of_property_read_bool(config->of_node, "ti,regulator-step-size-25mv")) {
+ switch (desc->id) {
+ case BUCK1:
+ case BUCK2:
+ case BUCK6:
+ regulators[desc->id].desc.linear_ranges =
tps65086_buck126_25mv_ranges;
- regulators[desc->id].desc.n_linear_ranges =
+ regulators[desc->id].desc.n_linear_ranges =
ARRAY_SIZE(tps65086_buck126_25mv_ranges);
+ break;
+ case BUCK3:
+ case BUCK4:
+ case BUCK5:
+ regulators[desc->id].desc.linear_ranges =
+ tps65086_buck345_25mv_ranges;
+ regulators[desc->id].desc.n_linear_ranges =
+ ARRAY_SIZE(tps65086_buck345_25mv_ranges);
+ break;
+ default:
+ dev_warn(config->dev, "25mV step mode only valid for BUCK regulators\n");
+ }
}
/* Check for decay mode */
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-13 13:44:37 +0000