diff options
Diffstat (limited to 'drivers/regulator')
22 files changed, 1485 insertions, 119 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 8155e80dd3f8..91040ec8e242 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -78,6 +78,15 @@ config REGULATOR_ACT8865 This driver controls a active-semi act8865 voltage output regulator via I2C bus. +config REGULATOR_ACT8945A + tristate "Active-semi ACT8945A voltage regulator" + depends on MFD_ACT8945A + help + This driver controls a active-semi ACT8945A voltage regulator + via I2C bus. The ACT8945A features three step-down DC/DC converters + and four low-dropout linear regulators, along with a ActivePath + battery charger. + config REGULATOR_AD5398 tristate "Analog Devices AD5398/AD5821 regulators" depends on I2C @@ -261,6 +270,14 @@ config REGULATOR_HI6421 21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All of them come with support to either ECO (idle) or sleep mode. +config REGULATOR_HI655X + tristate "Hisilicon HI655X PMIC regulators support" + depends on ARCH_HISI || COMPILE_TEST + depends on MFD_HI655X_PMIC && OF + help + This driver provides support for the voltage regulators of the + Hisilicon Hi655x PMIC device. + config REGULATOR_ISL9305 tristate "Intersil ISL9305 regulator" depends on I2C @@ -343,6 +360,15 @@ config REGULATOR_MAX1586 regulator via I2C bus. The provided regulator is suitable for PXA27x chips to control VCC_CORE and VCC_USIM voltages. +config REGULATOR_MAX77620 + tristate "Maxim 77620/MAX20024 voltage regulator" + depends on MFD_MAX77620 + help + This driver controls Maxim MAX77620 voltage output regulator + via I2C bus. The provided regulator is suitable for Tegra + chip to control Step-Down DC-DC and LDOs. Say Y here to + enable the regulator driver. + config REGULATOR_MAX8649 tristate "Maxim 8649 voltage regulator" depends on I2C diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 980b1943fa81..a78d8bf27358 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o obj-$(CONFIG_REGULATOR_AB8500) += ab8500-ext.o ab8500.o obj-$(CONFIG_REGULATOR_ACT8865) += act8865-regulator.o +obj-$(CONFIG_REGULATOR_ACT8945A) += act8945a-regulator.o obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o @@ -34,6 +35,7 @@ obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o +obj-$(CONFIG_REGULATOR_HI655X) += hi655x-regulator.o obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o obj-$(CONFIG_REGULATOR_LM363X) += lm363x-regulator.o @@ -46,6 +48,7 @@ obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o obj-$(CONFIG_REGULATOR_LTC3589) += ltc3589.o obj-$(CONFIG_REGULATOR_MAX14577) += max14577.o obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o +obj-$(CONFIG_REGULATOR_MAX77620) += max77620-regulator.o obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o obj-$(CONFIG_REGULATOR_MAX8907) += max8907-regulator.o @@ -54,9 +57,9 @@ obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o obj-$(CONFIG_REGULATOR_MAX8973) += max8973-regulator.o obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o -obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o +obj-$(CONFIG_REGULATOR_MAX77686) += max77686-regulator.o obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o -obj-$(CONFIG_REGULATOR_MAX77802) += max77802.o +obj-$(CONFIG_REGULATOR_MAX77802) += max77802-regulator.o obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c index f8d4cd3d1397..000d566e32a4 100644 --- a/drivers/regulator/act8865-regulator.c +++ b/drivers/regulator/act8865-regulator.c @@ -218,7 +218,7 @@ static const struct regulator_desc act8600_regulators[] = { .ops = &act8865_ldo_ops, .type = REGULATOR_VOLTAGE, .n_voltages = 1, - .fixed_uV = 1800000, + .fixed_uV = 3300000, .enable_reg = ACT8600_LDO910_CTRL, .enable_mask = ACT8865_ENA, .owner = THIS_MODULE, @@ -369,7 +369,7 @@ static int act8865_pdata_from_dt(struct device *dev, for (i = 0; i < num_matches; i++) { regulator->id = i; regulator->name = matches[i].name; - regulator->platform_data = matches[i].init_data; + regulator->init_data = matches[i].init_data; of_node[i] = matches[i].of_node; regulator++; } @@ -396,7 +396,7 @@ static struct regulator_init_data for (i = 0; i < pdata->num_regulators; i++) { if (pdata->regulators[i].id == id) - return pdata->regulators[i].platform_data; + return pdata->regulators[i].init_data; } return NULL; @@ -415,7 +415,7 @@ static void act8865_power_off(void) static int act8865_pmic_probe(struct i2c_client *client, const struct i2c_device_id *i2c_id) { - static const struct regulator_desc *regulators; + const struct regulator_desc *regulators; struct act8865_platform_data pdata_of, *pdata; struct device *dev = &client->dev; struct device_node **of_node; diff --git a/drivers/regulator/act8945a-regulator.c b/drivers/regulator/act8945a-regulator.c new file mode 100644 index 000000000000..441864b9fece --- /dev/null +++ b/drivers/regulator/act8945a-regulator.c @@ -0,0 +1,165 @@ +/* + * Voltage regulation driver for active-semi ACT8945A PMIC + * + * Copyright (C) 2015 Atmel Corporation + * + * Author: Wenyou Yang <wenyou.yang@atmel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + */ + +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> + +/** + * ACT8945A Global Register Map. + */ +#define ACT8945A_SYS_MODE 0x00 +#define ACT8945A_SYS_CTRL 0x01 +#define ACT8945A_DCDC1_VSET1 0x20 +#define ACT8945A_DCDC1_VSET2 0x21 +#define ACT8945A_DCDC1_CTRL 0x22 +#define ACT8945A_DCDC2_VSET1 0x30 +#define ACT8945A_DCDC2_VSET2 0x31 +#define ACT8945A_DCDC2_CTRL 0x32 +#define ACT8945A_DCDC3_VSET1 0x40 +#define ACT8945A_DCDC3_VSET2 0x41 +#define ACT8945A_DCDC3_CTRL 0x42 +#define ACT8945A_LDO1_VSET 0x50 +#define ACT8945A_LDO1_CTRL 0x51 +#define ACT8945A_LDO2_VSET 0x54 +#define ACT8945A_LDO2_CTRL 0x55 +#define ACT8945A_LDO3_VSET 0x60 +#define ACT8945A_LDO3_CTRL 0x61 +#define ACT8945A_LDO4_VSET 0x64 +#define ACT8945A_LDO4_CTRL 0x65 + +/** + * Field Definitions. + */ +#define ACT8945A_ENA 0x80 /* ON - [7] */ +#define ACT8945A_VSEL_MASK 0x3F /* VSET - [5:0] */ + +/** + * ACT8945A Voltage Number + */ +#define ACT8945A_VOLTAGE_NUM 64 + +enum { + ACT8945A_ID_DCDC1, + ACT8945A_ID_DCDC2, + ACT8945A_ID_DCDC3, + ACT8945A_ID_LDO1, + ACT8945A_ID_LDO2, + ACT8945A_ID_LDO3, + ACT8945A_ID_LDO4, + ACT8945A_REG_NUM, +}; + +static const struct regulator_linear_range act8945a_voltage_ranges[] = { + REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000), + REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000), + REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000), +}; + +static struct regulator_ops act8945a_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +#define ACT89xx_REG(_name, _family, _id, _vsel_reg, _supply) \ + [_family##_ID_##_id] = { \ + .name = _name, \ + .supply_name = _supply, \ + .of_match = of_match_ptr("REG_"#_id), \ + .regulators_node = of_match_ptr("regulators"), \ + .id = _family##_ID_##_id, \ + .type = REGULATOR_VOLTAGE, \ + .ops = &act8945a_ops, \ + .n_voltages = ACT8945A_VOLTAGE_NUM, \ + .linear_ranges = act8945a_voltage_ranges, \ + .n_linear_ranges = ARRAY_SIZE(act8945a_voltage_ranges), \ + .vsel_reg = _family##_##_id##_##_vsel_reg, \ + .vsel_mask = ACT8945A_VSEL_MASK, \ + .enable_reg = _family##_##_id##_CTRL, \ + .enable_mask = ACT8945A_ENA, \ + .owner = THIS_MODULE, \ + } + +static const struct regulator_desc act8945a_regulators[] = { + ACT89xx_REG("DCDC_REG1", ACT8945A, DCDC1, VSET1, "vp1"), + ACT89xx_REG("DCDC_REG2", ACT8945A, DCDC2, VSET1, "vp2"), + ACT89xx_REG("DCDC_REG3", ACT8945A, DCDC3, VSET1, "vp3"), + ACT89xx_REG("LDO_REG1", ACT8945A, LDO1, VSET, "inl45"), + ACT89xx_REG("LDO_REG2", ACT8945A, LDO2, VSET, "inl45"), + ACT89xx_REG("LDO_REG3", ACT8945A, LDO3, VSET, "inl67"), + ACT89xx_REG("LDO_REG4", ACT8945A, LDO4, VSET, "inl67"), +}; + +static const struct regulator_desc act8945a_alt_regulators[] = { + ACT89xx_REG("DCDC_REG1", ACT8945A, DCDC1, VSET2, "vp1"), + ACT89xx_REG("DCDC_REG2", ACT8945A, DCDC2, VSET2, "vp2"), + ACT89xx_REG("DCDC_REG3", ACT8945A, DCDC3, VSET2, "vp3"), + ACT89xx_REG("LDO_REG1", ACT8945A, LDO1, VSET, "inl45"), + ACT89xx_REG("LDO_REG2", ACT8945A, LDO2, VSET, "inl45"), + ACT89xx_REG("LDO_REG3", ACT8945A, LDO3, VSET, "inl67"), + ACT89xx_REG("LDO_REG4", ACT8945A, LDO4, VSET, "inl67"), +}; + +static int act8945a_pmic_probe(struct platform_device *pdev) +{ + struct regulator_config config = { }; + const struct regulator_desc *regulators; + struct regulator_dev *rdev; + int i, num_regulators; + bool voltage_select; + + voltage_select = of_property_read_bool(pdev->dev.parent->of_node, + "active-semi,vsel-high"); + + if (voltage_select) { + regulators = act8945a_alt_regulators; + num_regulators = ARRAY_SIZE(act8945a_alt_regulators); + } else { + regulators = act8945a_regulators; + num_regulators = ARRAY_SIZE(act8945a_regulators); + } + + config.dev = &pdev->dev; + config.dev->of_node = pdev->dev.parent->of_node; + for (i = 0; i < num_regulators; i++) { + rdev = devm_regulator_register(&pdev->dev, ®ulators[i], &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, + "failed to register %s regulator\n", + regulators[i].name); + return PTR_ERR(rdev); + } + } + + return 0; +} + +static struct platform_driver act8945a_pmic_driver = { + .driver = { + .name = "act8945a-regulator", + }, + .probe = act8945a_pmic_probe, +}; +module_platform_driver(act8945a_pmic_driver); + +MODULE_DESCRIPTION("Active-semi ACT8945A voltage regulator driver"); +MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/ad5398.c b/drivers/regulator/ad5398.c index ea50a886ba63..8b0f788a9bbb 100644 --- a/drivers/regulator/ad5398.c +++ b/drivers/regulator/ad5398.c @@ -58,10 +58,12 @@ static int ad5398_write_reg(struct i2c_client *client, const unsigned short data val = cpu_to_be16(data); ret = i2c_master_send(client, (char *)&val, 2); - if (ret < 0) + if (ret != 2) { dev_err(&client->dev, "I2C write error\n"); + return ret < 0 ? ret : -EIO; + } - return ret; + return 0; } static int ad5398_get_current_limit(struct regulator_dev *rdev) diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index f2e1a39ce0f3..214e815e98eb 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -39,7 +39,7 @@ #define AXP_DESC_IO(_family, _id, _match, _supply, _min, _max, _step, _vreg, \ _vmask, _ereg, _emask, _enable_val, _disable_val) \ [_family##_##_id] = { \ - .name = #_id, \ + .name = (_match), \ .supply_name = (_supply), \ .of_match = of_match_ptr(_match), \ .regulators_node = of_match_ptr("regulators"), \ @@ -61,7 +61,7 @@ #define AXP_DESC(_family, _id, _match, _supply, _min, _max, _step, _vreg, \ _vmask, _ereg, _emask) \ [_family##_##_id] = { \ - .name = #_id, \ + .name = (_match), \ .supply_name = (_supply), \ .of_match = of_match_ptr(_match), \ .regulators_node = of_match_ptr("regulators"), \ @@ -78,21 +78,15 @@ .ops = &axp20x_ops, \ } -#define AXP_DESC_SW(_family, _id, _match, _supply, _min, _max, _step, _vreg, \ - _vmask, _ereg, _emask) \ +#define AXP_DESC_SW(_family, _id, _match, _supply, _ereg, _emask) \ [_family##_##_id] = { \ - .name = #_id, \ + .name = (_match), \ .supply_name = (_supply), \ .of_match = of_match_ptr(_match), \ .regulators_node = of_match_ptr("regulators"), \ .type = REGULATOR_VOLTAGE, \ .id = _family##_##_id, \ - .n_voltages = (((_max) - (_min)) / (_step) + 1), \ .owner = THIS_MODULE, \ - .min_uV = (_min) * 1000, \ - .uV_step = (_step) * 1000, \ - .vsel_reg = (_vreg), \ - .vsel_mask = (_vmask), \ .enable_reg = (_ereg), \ .enable_mask = (_emask), \ .ops = &axp20x_ops_sw, \ @@ -100,7 +94,7 @@ #define AXP_DESC_FIXED(_family, _id, _match, _supply, _volt) \ [_family##_##_id] = { \ - .name = #_id, \ + .name = (_match), \ .supply_name = (_supply), \ .of_match = of_match_ptr(_match), \ .regulators_node = of_match_ptr("regulators"), \ @@ -112,39 +106,34 @@ .ops = &axp20x_ops_fixed \ } -#define AXP_DESC_TABLE(_family, _id, _match, _supply, _table, _vreg, _vmask, \ - _ereg, _emask) \ +#define AXP_DESC_RANGES(_family, _id, _match, _supply, _ranges, _n_voltages, \ + _vreg, _vmask, _ereg, _emask) \ [_family##_##_id] = { \ - .name = #_id, \ + .name = (_match), \ .supply_name = (_supply), \ .of_match = of_match_ptr(_match), \ .regulators_node = of_match_ptr("regulators"), \ .type = REGULATOR_VOLTAGE, \ .id = _family##_##_id, \ - .n_voltages = ARRAY_SIZE(_table), \ + .n_voltages = (_n_voltages), \ .owner = THIS_MODULE, \ .vsel_reg = (_vreg), \ .vsel_mask = (_vmask), \ .enable_reg = (_ereg), \ .enable_mask = (_emask), \ - .volt_table = (_table), \ - .ops = &axp20x_ops_table, \ + .linear_ranges = (_ranges), \ + .n_linear_ranges = ARRAY_SIZE(_ranges), \ + .ops = &axp20x_ops_range, \ } -static const int axp20x_ldo4_data[] = { 1250000, 1300000, 1400000, 1500000, 1600000, - 1700000, 1800000, 1900000, 2000000, 2500000, - 2700000, 2800000, 3000000, 3100000, 3200000, - 3300000 }; - static struct regulator_ops axp20x_ops_fixed = { .list_voltage = regulator_list_voltage_linear, }; -static struct regulator_ops axp20x_ops_table = { +static struct regulator_ops axp20x_ops_range = { .set_voltage_sel = regulator_set_voltage_sel_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, - .list_voltage = regulator_list_voltage_table, - .map_voltage = regulator_map_voltage_ascend, + .list_voltage = regulator_list_voltage_linear_range, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, @@ -160,13 +149,17 @@ static struct regulator_ops axp20x_ops = { }; static struct regulator_ops axp20x_ops_sw = { - .get_voltage_sel = regulator_get_voltage_sel_regmap, - .list_voltage = regulator_list_voltage_linear, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, }; +static const struct regulator_linear_range axp20x_ldo4_ranges[] = { + REGULATOR_LINEAR_RANGE(1250000, 0x0, 0x0, 0), + REGULATOR_LINEAR_RANGE(1300000, 0x1, 0x8, 100000), + REGULATOR_LINEAR_RANGE(2500000, 0x9, 0xf, 100000), +}; + static const struct regulator_desc axp20x_regulators[] = { AXP_DESC(AXP20X, DCDC2, "dcdc2", "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT, 0x3f, AXP20X_PWR_OUT_CTRL, 0x10), @@ -177,8 +170,9 @@ static const struct regulator_desc axp20x_regulators[] = { AXP20X_LDO24_V_OUT, 0xf0, AXP20X_PWR_OUT_CTRL, 0x04), AXP_DESC(AXP20X, LDO3, "ldo3", "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT, 0x7f, AXP20X_PWR_OUT_CTRL, 0x40), - AXP_DESC_TABLE(AXP20X, LDO4, "ldo4", "ldo24in", axp20x_ldo4_data, - AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL, 0x08), + AXP_DESC_RANGES(AXP20X, LDO4, "ldo4", "ldo24in", axp20x_ldo4_ranges, + 16, AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL, + 0x08), AXP_DESC_IO(AXP20X, LDO5, "ldo5", "ldo5in", 1800, 3300, 100, AXP20X_LDO5_V_OUT, 0xf0, AXP20X_GPIO0_CTRL, 0x07, AXP20X_IO_ENABLED, AXP20X_IO_DISABLED), @@ -196,8 +190,8 @@ static const struct regulator_desc axp22x_regulators[] = { AXP_DESC(AXP22X, DCDC5, "dcdc5", "vin5", 1000, 2550, 50, AXP22X_DCDC5_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(5)), /* secondary switchable output of DCDC1 */ - AXP_DESC_SW(AXP22X, DC1SW, "dc1sw", NULL, 1600, 3400, 100, - AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(7)), + AXP_DESC_SW(AXP22X, DC1SW, "dc1sw", NULL, AXP22X_PWR_OUT_CTRL2, + BIT(7)), /* LDO regulator internally chained to DCDC5 */ AXP_DESC(AXP22X, DC5LDO, "dc5ldo", NULL, 700, 1400, 100, AXP22X_DC5LDO_V_OUT, 0x7, AXP22X_PWR_OUT_CTRL1, BIT(0)), diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 744c9889f88d..e0b764284773 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1057,18 +1057,18 @@ static int set_machine_constraints(struct regulator_dev *rdev, ret = machine_constraints_voltage(rdev, rdev->constraints); if (ret != 0) - goto out; + return ret; ret = machine_constraints_current(rdev, rdev->constraints); if (ret != 0) - goto out; + return ret; if (rdev->constraints->ilim_uA && ops->set_input_current_limit) { ret = ops->set_input_current_limit(rdev, rdev->constraints->ilim_uA); if (ret < 0) { rdev_err(rdev, "failed to set input limit\n"); - goto out; + return ret; } } @@ -1077,21 +1077,20 @@ static int set_machine_constraints(struct regulator_dev *rdev, ret = suspend_prepare(rdev, rdev->constraints->initial_state); if (ret < 0) { rdev_err(rdev, "failed to set suspend state\n"); - goto out; + return ret; } } if (rdev->constraints->initial_mode) { if (!ops->set_mode) { rdev_err(rdev, "no set_mode operation\n"); - ret = -EINVAL; - goto out; + return -EINVAL; } ret = ops->set_mode(rdev, rdev->constraints->initial_mode); if (ret < 0) { rdev_err(rdev, "failed to set initial mode: %d\n", ret); - goto out; + return ret; } } @@ -1102,7 +1101,7 @@ static int set_machine_constraints(struct regulator_dev *rdev, ret = _regulator_do_enable(rdev); if (ret < 0 && ret != -EINVAL) { rdev_err(rdev, "failed to enable\n"); - goto out; + return ret; } } @@ -1111,7 +1110,7 @@ static int set_machine_constraints(struct regulator_dev *rdev, ret = ops->set_ramp_delay(rdev, rdev->constraints->ramp_delay); if (ret < 0) { rdev_err(rdev, "failed to set ramp_delay\n"); - goto out; + return ret; } } @@ -1119,7 +1118,7 @@ static int set_machine_constraints(struct regulator_dev *rdev, ret = ops->set_pull_down(rdev); if (ret < 0) { rdev_err(rdev, "failed to set pull down\n"); - goto out; + return ret; } } @@ -1127,7 +1126,7 @@ static int set_machine_constraints(struct regulator_dev *rdev, ret = ops->set_soft_start(rdev); if (ret < 0) { rdev_err(rdev, "failed to set soft start\n"); - goto out; + return ret; } } @@ -1136,16 +1135,34 @@ static int set_machine_constraints(struct regulator_dev *rdev, ret = ops->set_over_current_protection(rdev); if (ret < 0) { rdev_err(rdev, "failed to set over current protection\n"); - goto out; + return ret; + } + } + + if (rdev->constraints->active_discharge && ops->set_active_discharge) { + bool ad_state = (rdev->constraints->active_discharge == + REGULATOR_ACTIVE_DISCHARGE_ENABLE) ? true : false; + + ret = ops->set_active_discharge(rdev, ad_state); + if (ret < 0) { + rdev_err(rdev, "failed to set active discharge\n"); + return ret; + } + } + + if (rdev->constraints->active_discharge && ops->set_active_discharge) { + bool ad_state = (rdev->constraints->active_discharge == + REGULATOR_ACTIVE_DISCHARGE_ENABLE) ? true : false; + + ret = ops->set_active_discharge(rdev, ad_state); + if (ret < 0) { + rdev_err(rdev, "failed to set active discharge\n"); + return ret; } } print_constraints(rdev); return 0; -out: - kfree(rdev->constraints); - rdev->constraints = NULL; - return ret; } /** @@ -3918,6 +3935,16 @@ regulator_register(const struct regulator_desc *regulator_desc, goto clean; } + if ((config->ena_gpio || config->ena_gpio_initialized) && + gpio_is_valid(config->ena_gpio)) { + ret = regulator_ena_gpio_request(rdev, config); + if (ret != 0) { + rdev_err(rdev, "Failed to request enable GPIO%d: %d\n", + config->ena_gpio, ret); + goto clean; + } + } + /* register with sysfs */ rdev->dev.class = ®ulator_class; rdev->dev.parent = dev; @@ -3926,21 +3953,11 @@ regulator_register(const struct regulator_desc *regulator_desc, ret = device_register(&rdev->dev); if (ret != 0) { put_device(&rdev->dev); - goto clean; + goto wash; } dev_set_drvdata(&rdev->dev, rdev); - if ((config->ena_gpio || config->ena_gpio_initialized) && - gpio_is_valid(config->ena_gpio)) { - ret = regulator_ena_gpio_request(rdev, config); - if (ret != 0) { - rdev_err(rdev, "Failed to request enable GPIO%d: %d\n", - config->ena_gpio, ret); - goto wash; - } - } - /* set regulator constraints */ if (init_data) constraints = &init_data->constraints; @@ -3979,13 +3996,13 @@ unset_supplies: scrub: regulator_ena_gpio_free(rdev); - kfree(rdev->constraints); -wash: device_unregister(&rdev->dev); /* device core frees rdev */ rdev = ERR_PTR(ret); goto out; +wash: + regulator_ena_gpio_free(rdev); clean: kfree(rdev); rdev = ERR_PTR(ret); diff --git a/drivers/regulator/da9210-regulator.c b/drivers/regulator/da9210-regulator.c index 8b3cc9f0cd64..01c0e3709b66 100644 --- a/drivers/regulator/da9210-regulator.c +++ b/drivers/regulator/da9210-regulator.c @@ -132,6 +132,8 @@ static irqreturn_t da9210_irq_handler(int irq, void *data) if (error < 0) goto error_i2c; + mutex_lock(&chip->rdev->mutex); + if (val & DA9210_E_OVCURR) { regulator_notifier_call_chain(chip->rdev, REGULATOR_EVENT_OVER_CURRENT, @@ -155,6 +157,9 @@ static irqreturn_t da9210_irq_handler(int irq, void *data) NULL); handled |= DA9210_E_VMAX; } + + mutex_unlock(&chip->rdev->mutex); + if (handled) { /* Clear handled events */ error = regmap_write(chip->regmap, DA9210_REG_EVENT_B, handled); diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c index 4940e8287df6..2cb5cc311610 100644 --- a/drivers/regulator/fan53555.c +++ b/drivers/regulator/fan53555.c @@ -114,6 +114,22 @@ static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV) return 0; } +static int fan53555_set_suspend_enable(struct regulator_dev *rdev) +{ + struct fan53555_device_info *di = rdev_get_drvdata(rdev); + + return regmap_update_bits(di->regmap, di->sleep_reg, + VSEL_BUCK_EN, VSEL_BUCK_EN); +} + +static int fan53555_set_suspend_disable(struct regulator_dev *rdev) +{ + struct fan53555_device_info *di = rdev_get_drvdata(rdev); + + return regmap_update_bits(di->regmap, di->sleep_reg, + VSEL_BUCK_EN, 0); +} + static int fan53555_set_mode(struct regulator_dev *rdev, unsigned int mode) { struct fan53555_device_info *di = rdev_get_drvdata(rdev); @@ -192,6 +208,8 @@ static struct regulator_ops fan53555_regulator_ops = { .set_mode = fan53555_set_mode, .get_mode = fan53555_get_mode, .set_ramp_delay = fan53555_set_ramp, + .set_suspend_enable = fan53555_set_suspend_enable, + .set_suspend_disable = fan53555_set_suspend_disable, }; static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di) diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c index 7bba8b747f30..a8718e98674a 100644 --- a/drivers/regulator/gpio-regulator.c +++ b/drivers/regulator/gpio-regulator.c @@ -283,8 +283,10 @@ static int gpio_regulator_probe(struct platform_device *pdev) drvdata->nr_gpios = config->nr_gpios; ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios); if (ret) { - dev_err(&pdev->dev, - "Could not obtain regulator setting GPIOs: %d\n", ret); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "Could not obtain regulator setting GPIOs: %d\n", + ret); goto err_memstate; } } diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c index 3bbb32680a94..b1e32e7482e9 100644 --- a/drivers/regulator/helpers.c +++ b/drivers/regulator/helpers.c @@ -465,3 +465,26 @@ int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable) return 0; } EXPORT_SYMBOL_GPL(regulator_get_bypass_regmap); + +/** + * regulator_set_active_discharge_regmap - Default set_active_discharge() + * using regmap + * + * @rdev: device to operate on. + * @enable: state to set, 0 to disable and 1 to enable. + */ +int regulator_set_active_discharge_regmap(struct regulator_dev *rdev, + bool enable) +{ + unsigned int val; + + if (enable) + val = rdev->desc->active_discharge_on; + else + val = rdev->desc->active_discharge_off; + + return regmap_update_bits(rdev->regmap, + rdev->desc->active_discharge_reg, + rdev->desc->active_discharge_mask, val); +} +EXPORT_SYMBOL_GPL(regulator_set_active_discharge_regmap); diff --git a/drivers/regulator/hi655x-regulator.c b/drivers/regulator/hi655x-regulator.c new file mode 100644 index 000000000000..aca18466f522 --- /dev/null +++ b/drivers/regulator/hi655x-regulator.c @@ -0,0 +1,227 @@ +/* + * Device driver for regulators in Hi655x IC + * + * Copyright (c) 2016 Hisilicon. + * + * Authors: + * Chen Feng <puck.chen@hisilicon.com> + * Fei Wang <w.f@huawei.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h> +#include <linux/mfd/hi655x-pmic.h> + +struct hi655x_regulator { + unsigned int disable_reg; + unsigned int status_reg; + unsigned int ctrl_regs; + unsigned int ctrl_mask; + struct regulator_desc rdesc; +}; + +/* LDO7 & LDO10 */ +static const unsigned int ldo7_voltages[] = { + 1800000, 1850000, 2850000, 2900000, + 3000000, 3100000, 3200000, 3300000, +}; + +static const unsigned int ldo19_voltages[] = { + 1800000, 1850000, 1900000, 1750000, + 2800000, 2850000, 2900000, 3000000, +}; + +static const unsigned int ldo22_voltages[] = { + 900000, 1000000, 1050000, 1100000, + 1150000, 1175000, 1185000, 1200000, +}; + +enum hi655x_regulator_id { + HI655X_LDO0, + HI655X_LDO1, + HI655X_LDO2, + HI655X_LDO3, + HI655X_LDO4, + HI655X_LDO5, + HI655X_LDO6, + HI655X_LDO7, + HI655X_LDO8, + HI655X_LDO9, + HI655X_LDO10, + HI655X_LDO11, + HI655X_LDO12, + HI655X_LDO13, + HI655X_LDO14, + HI655X_LDO15, + HI655X_LDO16, + HI655X_LDO17, + HI655X_LDO18, + HI655X_LDO19, + HI655X_LDO20, + HI655X_LDO21, + HI655X_LDO22, +}; + +static int hi655x_is_enabled(struct regulator_dev *rdev) +{ + unsigned int value = 0; + + struct hi655x_regulator *regulator = rdev_get_drvdata(rdev); + + regmap_read(rdev->regmap, regulator->status_reg, &value); + return (value & BIT(regulator->ctrl_mask)); +} + +static int hi655x_disable(struct regulator_dev *rdev) +{ + int ret = 0; + + struct hi655x_regulator *regulator = rdev_get_drvdata(rdev); + + ret = regmap_write(rdev->regmap, regulator->disable_reg, + BIT(regulator->ctrl_mask)); + return ret; +} + +static struct regulator_ops hi655x_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = hi655x_disable, + .is_enabled = hi655x_is_enabled, + .list_voltage = regulator_list_voltage_table, |