diff options
Diffstat (limited to 'drivers/pinctrl')
23 files changed, 948 insertions, 724 deletions
diff --git a/drivers/pinctrl/mvebu/pinctrl-mvebu.c b/drivers/pinctrl/mvebu/pinctrl-mvebu.c index bb7ddb1bc89f..e78c041c3c73 100644 --- a/drivers/pinctrl/mvebu/pinctrl-mvebu.c +++ b/drivers/pinctrl/mvebu/pinctrl-mvebu.c @@ -191,18 +191,27 @@ static int mvebu_pinconf_group_get(struct pinctrl_dev *pctldev, } static int mvebu_pinconf_group_set(struct pinctrl_dev *pctldev, - unsigned gid, unsigned long config) + unsigned gid, unsigned long *configs, + unsigned num_configs) { struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); struct mvebu_pinctrl_group *grp = &pctl->groups[gid]; + int i, ret; if (!grp->ctrl) return -EINVAL; - if (grp->ctrl->mpp_set) - return grp->ctrl->mpp_set(grp->ctrl, config); + for (i = 0; i < num_configs; i++) { + if (grp->ctrl->mpp_set) + ret = grp->ctrl->mpp_set(grp->ctrl, configs[i]); + else + ret = mvebu_common_mpp_set(pctl, grp, configs[i]); - return mvebu_common_mpp_set(pctl, grp, config); + if (ret) + return ret; + } /* for each config */ + + return 0; } static void mvebu_pinconf_group_dbg_show(struct pinctrl_dev *pctldev, @@ -303,6 +312,7 @@ static int mvebu_pinmux_enable(struct pinctrl_dev *pctldev, unsigned fid, struct mvebu_pinctrl_group *grp = &pctl->groups[gid]; struct mvebu_mpp_ctrl_setting *setting; int ret; + unsigned long config; setting = mvebu_pinctrl_find_setting_by_name(pctl, grp, func->name); @@ -313,7 +323,8 @@ static int mvebu_pinmux_enable(struct pinctrl_dev *pctldev, unsigned fid, return -EINVAL; } - ret = mvebu_pinconf_group_set(pctldev, grp->gid, setting->val); + config = setting->val; + ret = mvebu_pinconf_group_set(pctldev, grp->gid, &config, 1); if (ret) { dev_err(pctl->dev, "cannot set group %s to %s\n", func->groups[gid], func->name); @@ -329,6 +340,7 @@ static int mvebu_pinmux_gpio_request_enable(struct pinctrl_dev *pctldev, struct mvebu_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); struct mvebu_pinctrl_group *grp; struct mvebu_mpp_ctrl_setting *setting; + unsigned long config; grp = mvebu_pinctrl_find_group_by_pid(pctl, offset); if (!grp) @@ -341,7 +353,9 @@ static int mvebu_pinmux_gpio_request_enable(struct pinctrl_dev *pctldev, if (!setting) return -ENOTSUPP; - return mvebu_pinconf_group_set(pctldev, grp->gid, setting->val); + config = setting->val; + + return mvebu_pinconf_group_set(pctldev, grp->gid, &config, 1); } static int mvebu_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev, diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c index 8da2d6db228c..a138965c01cb 100644 --- a/drivers/pinctrl/pinconf.c +++ b/drivers/pinctrl/pinconf.c @@ -158,7 +158,7 @@ int pinconf_apply_setting(struct pinctrl_setting const *setting) { struct pinctrl_dev *pctldev = setting->pctldev; const struct pinconf_ops *ops = pctldev->desc->confops; - int i, ret; + int ret; if (!ops) { dev_err(pctldev->dev, "missing confops\n"); @@ -171,17 +171,15 @@ int pinconf_apply_setting(struct pinctrl_setting const *setting) dev_err(pctldev->dev, "missing pin_config_set op\n"); return -EINVAL; } - for (i = 0; i < setting->data.configs.num_configs; i++) { - ret = ops->pin_config_set(pctldev, - setting->data.configs.group_or_pin, - setting->data.configs.configs[i]); - if (ret < 0) { - dev_err(pctldev->dev, - "pin_config_set op failed for pin %d config %08lx\n", - setting->data.configs.group_or_pin, - setting->data.configs.configs[i]); - return ret; - } + ret = ops->pin_config_set(pctldev, + setting->data.configs.group_or_pin, + setting->data.configs.configs, + setting->data.configs.num_configs); + if (ret < 0) { + dev_err(pctldev->dev, + "pin_config_set op failed for pin %d\n", + setting->data.configs.group_or_pin); + return ret; } break; case PIN_MAP_TYPE_CONFIGS_GROUP: @@ -190,17 +188,15 @@ int pinconf_apply_setting(struct pinctrl_setting const *setting) "missing pin_config_group_set op\n"); return -EINVAL; } - for (i = 0; i < setting->data.configs.num_configs; i++) { - ret = ops->pin_config_group_set(pctldev, - setting->data.configs.group_or_pin, - setting->data.configs.configs[i]); - if (ret < 0) { - dev_err(pctldev->dev, - "pin_config_group_set op failed for group %d config %08lx\n", - setting->data.configs.group_or_pin, - setting->data.configs.configs[i]); - return ret; - } + ret = ops->pin_config_group_set(pctldev, + setting->data.configs.group_or_pin, + setting->data.configs.configs, + setting->data.configs.num_configs); + if (ret < 0) { + dev_err(pctldev->dev, + "pin_config_group_set op failed for group %d\n", + setting->data.configs.group_or_pin); + return ret; } break; default: diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c index 1d3f988c2c8b..8f25df06bc6b 100644 --- a/drivers/pinctrl/pinctrl-abx500.c +++ b/drivers/pinctrl/pinctrl-abx500.c @@ -1041,98 +1041,115 @@ static int abx500_pin_config_get(struct pinctrl_dev *pctldev, static int abx500_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin, - unsigned long config) + unsigned long *configs, + unsigned num_configs) { struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); struct gpio_chip *chip = &pct->chip; unsigned offset; int ret = -EINVAL; - enum pin_config_param param = pinconf_to_config_param(config); - enum pin_config_param argument = pinconf_to_config_argument(config); - - dev_dbg(chip->dev, "pin %d [%#lx]: %s %s\n", - pin, config, (param == PIN_CONFIG_OUTPUT) ? "output " : "input", - (param == PIN_CONFIG_OUTPUT) ? (argument ? "high" : "low") : - (argument ? "pull up" : "pull down")); - - /* on ABx500, there is no GPIO0, so adjust the offset */ - offset = pin - 1; - - switch (param) { - case PIN_CONFIG_BIAS_DISABLE: - ret = abx500_gpio_direction_input(chip, offset); - if (ret < 0) - goto out; - /* - * Some chips only support pull down, while some actually - * support both pull up and pull down. Such chips have - * a "pullud" range specified for the pins that support - * both features. If the pin is not within that range, we - * fall back to the old bit set that only support pull down. - */ - if (abx500_pullud_supported(chip, pin)) - ret = abx500_set_pull_updown(pct, - pin, - ABX500_GPIO_PULL_NONE); - else - /* Chip only supports pull down */ - ret = abx500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG, - offset, ABX500_GPIO_PULL_NONE); - break; - - case PIN_CONFIG_BIAS_PULL_DOWN: - ret = abx500_gpio_direction_input(chip, offset); - if (ret < 0) - goto out; - /* - * if argument = 1 set the pull down - * else clear the pull down - * Some chips only support pull down, while some actually - * support both pull up and pull down. Such chips have - * a "pullud" range specified for the pins that support - * both features. If the pin is not within that range, we - * fall back to the old bit set that only support pull down. - */ - if (abx500_pullud_supported(chip, pin)) - ret = abx500_set_pull_updown(pct, - pin, - argument ? ABX500_GPIO_PULL_DOWN : ABX500_GPIO_PULL_NONE); - else - /* Chip only supports pull down */ - ret = abx500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG, - offset, - argument ? ABX500_GPIO_PULL_DOWN : ABX500_GPIO_PULL_NONE); - break; - - case PIN_CONFIG_BIAS_PULL_UP: - ret = abx500_gpio_direction_input(chip, offset); - if (ret < 0) - goto out; - /* - * if argument = 1 set the pull up - * else clear the pull up - */ - ret = abx500_gpio_direction_input(chip, offset); - /* - * Some chips only support pull down, while some actually - * support both pull up and pull down. Such chips have - * a "pullud" range specified for the pins that support - * both features. If the pin is not within that range, do - * nothing - */ - if (abx500_pullud_supported(chip, pin)) - ret = abx500_set_pull_updown(pct, - pin, - argument ? ABX500_GPIO_PULL_UP : ABX500_GPIO_PULL_NONE); - break; + int i; + enum pin_config_param param; + enum pin_config_param argument; + + for (i = 0; i < num_configs; i++) { + param = pinconf_to_config_param(configs[i]); + argument = pinconf_to_config_argument(configs[i]); + + dev_dbg(chip->dev, "pin %d [%#lx]: %s %s\n", + pin, configs[i], + (param == PIN_CONFIG_OUTPUT) ? "output " : "input", + (param == PIN_CONFIG_OUTPUT) ? + (argument ? "high" : "low") : + (argument ? "pull up" : "pull down")); + + /* on ABx500, there is no GPIO0, so adjust the offset */ + offset = pin - 1; + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + ret = abx500_gpio_direction_input(chip, offset); + if (ret < 0) + goto out; + /* + * Some chips only support pull down, while some + * actually support both pull up and pull down. Such + * chips have a "pullud" range specified for the pins + * that support both features. If the pin is not + * within that range, we fall back to the old bit set + * that only support pull down. + */ + if (abx500_pullud_supported(chip, pin)) + ret = abx500_set_pull_updown(pct, + pin, + ABX500_GPIO_PULL_NONE); + else + /* Chip only supports pull down */ + ret = abx500_gpio_set_bits(chip, + AB8500_GPIO_PUD1_REG, offset, + ABX500_GPIO_PULL_NONE); + break; - case PIN_CONFIG_OUTPUT: - ret = abx500_gpio_direction_output(chip, offset, argument); - break; + case PIN_CONFIG_BIAS_PULL_DOWN: + ret = abx500_gpio_direction_input(chip, offset); + if (ret < 0) + goto out; + /* + * if argument = 1 set the pull down + * else clear the pull down + * Some chips only support pull down, while some + * actually support both pull up and pull down. Such + * chips have a "pullud" range specified for the pins + * that support both features. If the pin is not + * within that range, we fall back to the old bit set + * that only support pull down. + */ + if (abx500_pullud_supported(chip, pin)) + ret = abx500_set_pull_updown(pct, + pin, + argument ? ABX500_GPIO_PULL_DOWN : + ABX500_GPIO_PULL_NONE); + else + /* Chip only supports pull down */ + ret = abx500_gpio_set_bits(chip, + AB8500_GPIO_PUD1_REG, + offset, + argument ? ABX500_GPIO_PULL_DOWN : + ABX500_GPIO_PULL_NONE); + break; - default: - dev_err(chip->dev, "illegal configuration requested\n"); - } + case PIN_CONFIG_BIAS_PULL_UP: + ret = abx500_gpio_direction_input(chip, offset); + if (ret < 0) + goto out; + /* + * if argument = 1 set the pull up + * else clear the pull up + */ + ret = abx500_gpio_direction_input(chip, offset); + /* + * Some chips only support pull down, while some + * actually support both pull up and pull down. Such + * chips have a "pullud" range specified for the pins + * that support both features. If the pin is not + * within that range, do nothing + */ + if (abx500_pullud_supported(chip, pin)) + ret = abx500_set_pull_updown(pct, + pin, + argument ? ABX500_GPIO_PULL_UP : + ABX500_GPIO_PULL_NONE); + break; + + case PIN_CONFIG_OUTPUT: + ret = abx500_gpio_direction_output(chip, offset, + argument); + break; + + default: + dev_err(chip->dev, "illegal configuration requested\n"); + } + } /* for each config */ out: if (ret < 0) dev_err(pct->dev, "%s failed (%d)\n", __func__, ret); diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c index 7cce066c71b6..9685ff6c8b01 100644 --- a/drivers/pinctrl/pinctrl-at91.c +++ b/drivers/pinctrl/pinctrl-at91.c @@ -736,30 +736,40 @@ static int at91_pinconf_get(struct pinctrl_dev *pctldev, } static int at91_pinconf_set(struct pinctrl_dev *pctldev, - unsigned pin_id, unsigned long config) + unsigned pin_id, unsigned long *configs, + unsigned num_configs) { struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); unsigned mask; void __iomem *pio; - - dev_dbg(info->dev, "%s:%d, pin_id=%d, config=0x%lx", __func__, __LINE__, pin_id, config); - pio = pin_to_controller(info, pin_to_bank(pin_id)); - mask = pin_to_mask(pin_id % MAX_NB_GPIO_PER_BANK); - - if (config & PULL_UP && config & PULL_DOWN) - return -EINVAL; - - at91_mux_set_pullup(pio, mask, config & PULL_UP); - at91_mux_set_multidrive(pio, mask, config & MULTI_DRIVE); - if (info->ops->set_deglitch) - info->ops->set_deglitch(pio, mask, config & DEGLITCH); - if (info->ops->set_debounce) - info->ops->set_debounce(pio, mask, config & DEBOUNCE, + int i; + unsigned long config; + + for (i = 0; i < num_configs; i++) { + config = configs[i]; + + dev_dbg(info->dev, + "%s:%d, pin_id=%d, config=0x%lx", + __func__, __LINE__, pin_id, config); + pio = pin_to_controller(info, pin_to_bank(pin_id)); + mask = pin_to_mask(pin_id % MAX_NB_GPIO_PER_BANK); + + if (config & PULL_UP && config & PULL_DOWN) + return -EINVAL; + + at91_mux_set_pullup(pio, mask, config & PULL_UP); + at91_mux_set_multidrive(pio, mask, config & MULTI_DRIVE); + if (info->ops->set_deglitch) + info->ops->set_deglitch(pio, mask, config & DEGLITCH); + if (info->ops->set_debounce) + info->ops->set_debounce(pio, mask, config & DEBOUNCE, (config & DEBOUNCE_VAL) >> DEBOUNCE_VAL_SHIFT); - if (info->ops->set_pulldown) - info->ops->set_pulldown(pio, mask, config & PULL_DOWN); - if (info->ops->disable_schmitt_trig && config & DIS_SCHMIT) - info->ops->disable_schmitt_trig(pio, mask); + if (info->ops->set_pulldown) + info->ops->set_pulldown(pio, mask, config & PULL_DOWN); + if (info->ops->disable_schmitt_trig && config & DIS_SCHMIT) + info->ops->disable_schmitt_trig(pio, mask); + + } /* for each config */ return 0; } diff --git a/drivers/pinctrl/pinctrl-bcm2835.c b/drivers/pinctrl/pinctrl-bcm2835.c index a1c88b30f71f..c05c1ef2cc3c 100644 --- a/drivers/pinctrl/pinctrl-bcm2835.c +++ b/drivers/pinctrl/pinctrl-bcm2835.c @@ -893,28 +893,35 @@ static int bcm2835_pinconf_get(struct pinctrl_dev *pctldev, } static int bcm2835_pinconf_set(struct pinctrl_dev *pctldev, - unsigned pin, unsigned long config) + unsigned pin, unsigned long *configs, + unsigned num_configs) { struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); - enum bcm2835_pinconf_param param = BCM2835_PINCONF_UNPACK_PARAM(config); - u16 arg = BCM2835_PINCONF_UNPACK_ARG(config); + enum bcm2835_pinconf_param param; + u16 arg; u32 off, bit; + int i; - if (param != BCM2835_PINCONF_PARAM_PULL) - return -EINVAL; - - off = GPIO_REG_OFFSET(pin); - bit = GPIO_REG_SHIFT(pin); - - bcm2835_gpio_wr(pc, GPPUD, arg & 3); - /* - * Docs say to wait 150 cycles, but not of what. We assume a - * 1 MHz clock here, which is pretty slow... - */ - udelay(150); - bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), BIT(bit)); - udelay(150); - bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), 0); + for (i = 0; i < num_configs; i++) { + param = BCM2835_PINCONF_UNPACK_PARAM(configs[i]); + arg = BCM2835_PINCONF_UNPACK_ARG(configs[i]); + + if (param != BCM2835_PINCONF_PARAM_PULL) + return -EINVAL; + + off = GPIO_REG_OFFSET(pin); + bit = GPIO_REG_SHIFT(pin); + + bcm2835_gpio_wr(pc, GPPUD, arg & 3); + /* + * Docs say to wait 150 cycles, but not of what. We assume a + * 1 MHz clock here, which is pretty slow... + */ + udelay(150); + bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), BIT(bit)); + udelay(150); + bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), 0); + } /* for each config */ return 0; } diff --git a/drivers/pinctrl/pinctrl-exynos5440.c b/drivers/pinctrl/pinctrl-exynos5440.c index 3b283fd898ff..544d469c5a7b 100644 --- a/drivers/pinctrl/pinctrl-exynos5440.c +++ b/drivers/pinctrl/pinctrl-exynos5440.c @@ -401,64 +401,71 @@ static const struct pinmux_ops exynos5440_pinmux_ops = { /* set the pin config settings for a specified pin */ static int exynos5440_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, - unsigned long config) + unsigned long *configs, + unsigned num_configs) { struct exynos5440_pinctrl_priv_data *priv; void __iomem *base; - enum pincfg_type cfg_type = PINCFG_UNPACK_TYPE(config); - u32 cfg_value = PINCFG_UNPACK_VALUE(config); + enum pincfg_type cfg_type; + u32 cfg_value; u32 data; + int i; priv = pinctrl_dev_get_drvdata(pctldev); base = priv->reg_base; - switch (cfg_type) { - case PINCFG_TYPE_PUD: - /* first set pull enable/disable bit */ - data = readl(base + GPIO_PE); - data &= ~(1 << pin); - if (cfg_value) - data |= (1 << pin); - writel(data, base + GPIO_PE); - - /* then set pull up/down bit */ - data = readl(base + GPIO_PS); - data &= ~(1 << pin); - if (cfg_value == 2) - data |= (1 << pin); - writel(data, base + GPIO_PS); - break; - - case PINCFG_TYPE_DRV: - /* set the first bit of the drive strength */ - data = readl(base + GPIO_DS0); - data &= ~(1 << pin); - data |= ((cfg_value & 1) << pin); - writel(data, base + GPIO_DS0); - cfg_value >>= 1; - - /* set the second bit of the driver strength */ - data = readl(base + GPIO_DS1); - data &= ~(1 << pin); - data |= ((cfg_value & 1) << pin); - writel(data, base + GPIO_DS1); - break; - case PINCFG_TYPE_SKEW_RATE: - data = readl(base + GPIO_SR); - data &= ~(1 << pin); - data |= ((cfg_value & 1) << pin); - writel(data, base + GPIO_SR); - break; - case PINCFG_TYPE_INPUT_TYPE: - data = readl(base + GPIO_TYPE); - data &= ~(1 << pin); - data |= ((cfg_value & 1) << pin); - writel(data, base + GPIO_TYPE); - break; - default: - WARN_ON(1); - return -EINVAL; - } + for (i = 0; i < num_configs; i++) { + cfg_type = PINCFG_UNPACK_TYPE(configs[i]); + cfg_value = PINCFG_UNPACK_VALUE(configs[i]); + + switch (cfg_type) { + case PINCFG_TYPE_PUD: + /* first set pull enable/disable bit */ + data = readl(base + GPIO_PE); + data &= ~(1 << pin); + if (cfg_value) + data |= (1 << pin); + writel(data, base + GPIO_PE); + + /* then set pull up/down bit */ + data = readl(base + GPIO_PS); + data &= ~(1 << pin); + if (cfg_value == 2) + data |= (1 << pin); + writel(data, base + GPIO_PS); + break; + + case PINCFG_TYPE_DRV: + /* set the first bit of the drive strength */ + data = readl(base + GPIO_DS0); + data &= ~(1 << pin); + data |= ((cfg_value & 1) << pin); + writel(data, base + GPIO_DS0); + cfg_value >>= 1; + + /* set the second bit of the driver strength */ + data = readl(base + GPIO_DS1); + data &= ~(1 << pin); + data |= ((cfg_value & 1) << pin); + writel(data, base + GPIO_DS1); + break; + case PINCFG_TYPE_SKEW_RATE: + data = readl(base + GPIO_SR); + data &= ~(1 << pin); + data |= ((cfg_value & 1) << pin); + writel(data, base + GPIO_SR); + break; + case PINCFG_TYPE_INPUT_TYPE: + data = readl(base + GPIO_TYPE); + data &= ~(1 << pin); + data |= ((cfg_value & 1) << pin); + writel(data, base + GPIO_TYPE); + break; + default: + WARN_ON(1); + return -EINVAL; + } + } /* for each config */ return 0; } @@ -510,7 +517,8 @@ static int exynos5440_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin, /* set the pin config settings for a specified pin group */ static int exynos5440_pinconf_group_set(struct pinctrl_dev *pctldev, - unsigned group, unsigned long config) + unsigned group, unsigned long *configs, + unsigned num_configs) { struct exynos5440_pinctrl_priv_data *priv; const unsigned int *pins; @@ -520,7 +528,8 @@ static int exynos5440_pinconf_group_set(struct pinctrl_dev *pctldev, pins = priv->pin_groups[group].pins; for (cnt = 0; cnt < priv->pin_groups[group].num_pins; cnt++) - exynos5440_pinconf_set(pctldev, pins[cnt], config); + exynos5440_pinconf_set(pctldev, pins[cnt], configs, + num_configs); return 0; } diff --git a/drivers/pinctrl/pinctrl-falcon.c b/drivers/pinctrl/pinctrl-falcon.c index 4e731f24df85..2e62689b5e9f 100644 --- a/drivers/pinctrl/pinctrl-falcon.c +++ b/drivers/pinctrl/pinctrl-falcon.c @@ -238,7 +238,8 @@ static int falcon_pinconf_group_get(struct pinctrl_dev *pctrldev, } static int falcon_pinconf_group_set(struct pinctrl_dev *pctrldev, - unsigned group, unsigned long config) + unsigned group, unsigned long *configs, + unsigned num_configs) { return -ENOTSUPP; } @@ -279,39 +280,47 @@ static int falcon_pinconf_get(struct pinctrl_dev *pctrldev, } static int falcon_pinconf_set(struct pinctrl_dev *pctrldev, - unsigned pin, unsigned long config) + unsigned pin, unsigned long *configs, + unsigned num_configs) { - enum ltq_pinconf_param param = LTQ_PINCONF_UNPACK_PARAM(config); - int arg = LTQ_PINCONF_UNPACK_ARG(config); + enum ltq_pinconf_param param; + int arg; struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); void __iomem *mem = info->membase[PORT(pin)]; u32 reg; + int i; - switch (param) { - case LTQ_PINCONF_PARAM_DRIVE_CURRENT: - reg = LTQ_PADC_DCC; - break; - - case LTQ_PINCONF_PARAM_SLEW_RATE: - reg = LTQ_PADC_SRC; - break; - - case LTQ_PINCONF_PARAM_PULL: - if (arg == 1) - reg = LTQ_PADC_PDEN; - else - reg = LTQ_PADC_PUEN; - break; + for (i = 0; i < num_configs; i++) { + param = LTQ_PINCONF_UNPACK_PARAM(configs[i]); + arg = LTQ_PINCONF_UNPACK_ARG(configs[i]); + + switch (param) { + case LTQ_PINCONF_PARAM_DRIVE_CURRENT: + reg = LTQ_PADC_DCC; + break; + + case LTQ_PINCONF_PARAM_SLEW_RATE: + reg = LTQ_PADC_SRC; + break; + + case LTQ_PINCONF_PARAM_PULL: + if (arg == 1) + reg = LTQ_PADC_PDEN; + else + reg = LTQ_PADC_PUEN; + break; + + default: + pr_err("%s: Invalid config param %04x\n", + pinctrl_dev_get_name(pctrldev), param); + return -ENOTSUPP; + } - default: - pr_err("%s: Invalid config param %04x\n", - pinctrl_dev_get_name(pctrldev), param); - return -ENOTSUPP; - } + pad_w32(mem, BIT(PORT_PIN(pin)), reg); + if (!(pad_r32(mem, reg) & BIT(PORT_PIN(pin)))) + return -ENOTSUPP; + } /* for each config */ - pad_w32(mem, BIT(PORT_PIN(pin)), reg); - if (!(pad_r32(mem, reg) & BIT(PORT_PIN(pin)))) - return -ENOTSUPP; return 0; } diff --git a/drivers/pinctrl/pinctrl-imx.c b/drivers/pinctrl/pinctrl-imx.c index 360249301315..d78dd813bff9 100644 --- a/drivers/pinctrl/pinctrl-imx.c +++ b/drivers/pinctrl/pinctrl-imx.c @@ -323,11 +323,13 @@ static int imx_pinconf_get(struct pinctrl_dev *pctldev, } static int imx_pinconf_set(struct pinctrl_dev *pctldev, - unsigned pin_id, unsigned long config) + unsigned pin_id, unsigned long *configs, + unsigned num_configs) { struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); const struct imx_pinctrl_soc_info *info = ipctl->info; const struct imx_pin_reg *pin_reg = &info->pin_regs[pin_id]; + int i; if (!(info->flags & ZERO_OFFSET_VALID) && !pin_reg->conf_reg) { dev_err(info->dev, "Pin(%s) does not support config function\n", @@ -338,17 +340,19 @@ static int imx_pinconf_set(struct pinctrl_dev *pctldev, dev_dbg(ipctl->dev, "pinconf set pin %s\n", info->pins[pin_id].name); - if (info->flags & SHARE_MUX_CONF_REG) { - u32 reg; - reg = readl(ipctl->base + pin_reg->conf_reg); - reg &= ~0xffff; - reg |= config; - writel(reg, ipctl->base + pin_reg->conf_reg); - } else { - writel(config, ipctl->base + pin_reg->conf_reg); - } - dev_dbg(ipctl->dev, "write: offset 0x%x val 0x%lx\n", - pin_reg->conf_reg, config); + for (i = 0; i < num_configs; i++) { + if (info->flags & SHARE_MUX_CONF_REG) { + u32 reg; + reg = readl(ipctl->base + pin_reg->conf_reg); + reg &= ~0xffff; + reg |= configs[i]; + writel(reg, ipctl->base + pin_reg->conf_reg); + } else { + writel(configs[i], ipctl->base + pin_reg->conf_reg); + } + dev_dbg(ipctl->dev, "write: offset 0x%x val 0x%lx\n", + pin_reg->conf_reg, configs[i]); + } /* for each config */ return 0; } diff --git a/drivers/pinctrl/pinctrl-mxs.c b/drivers/pinctrl/pinctrl-mxs.c index f5d56436ba7f..40c76f26998c 100644 --- a/drivers/pinctrl/pinctrl-mxs.c +++ b/drivers/pinctrl/pinctrl-mxs.c @@ -233,7 +233,8 @@ static int mxs_pinconf_get(struct pinctrl_dev *pctldev, } static int mxs_pinconf_set(struct pinctrl_dev *pctldev, - unsigned pin, unsigned long config) + unsigned pin, unsigned long *configs, + unsigned num_configs) { return -ENOTSUPP; } @@ -249,7 +250,8 @@ static int mxs_pinconf_group_get(struct pinctrl_dev *pctldev, } static int mxs_pinconf_group_set(struct pinctrl_dev *pctldev, - unsigned group, unsigned long config) + unsigned group, unsigned long *configs, + unsigned num_configs) { struct mxs_pinctrl_data *d = pinctrl_dev_get_drvdata(pctldev); struct mxs_group *g = &d->soc->groups[group]; @@ -257,49 +259,56 @@ static int mxs_pinconf_group_set(struct pinctrl_dev *pctldev, u8 ma, vol, pull, bank, shift; u16 pin; u32 i; + int n; + unsigned long config; - ma = CONFIG_TO_MA(config); - vol = CONFIG_TO_VOL(config); - pull = CONFIG_TO_PULL(config); - - for (i = 0; i < g->npins; i++) { - bank = PINID_TO_BANK(g->pins[i]); - pin = PINID_TO_PIN(g->pins[i]); - - /* drive */ - reg = d->base + d->soc->regs->drive; - reg += bank * 0x40 + pin / 8 * 0x10; - - /* mA */ - if (config & MA_PRESENT) { - shift = pin % 8 * 4; - writel(0x3 << shift, reg + CLR); - writel(ma << shift, reg + SET); - } - - /* vol */ - if (config & VOL_PRESENT) { - shift = pin % 8 * 4 + 2; - if (vol) - writel(1 << shift, reg + SET); - else - writel(1 << shift, reg + CLR); + for (n = 0; n < num_configs; n++) { + config = configs[n]; + + ma = CONFIG_TO_MA(config); + vol = CONFIG_TO_VOL(config); + pull = CONFIG_TO_PULL(config); + + for (i = 0; i < g->npins; i++) { + bank = PINID_TO_BANK(g->pins[i]); + pin = PINID_TO_PIN(g->pins[i]); + + /* drive */ + reg = d->base + d->soc->regs->drive; + reg += bank * 0x40 + pin / 8 * 0x10; + + /* mA */ + if (config & MA_PRESENT) { + shift = pin % 8 * 4; + writel(0x3 << shift, reg + CLR); + writel(ma << shift, reg + SET); + } + + /* vol */ + if (config & VOL_PRESENT) { + shift = pin % 8 * 4 + 2; + if (vol) + writel(1 << shift, reg + SET); + else + writel(1 << shift, reg + CLR); + } + + /* pull */ + if (config & PULL_PRESENT) { + reg = d->base + d->soc->regs->pull; + reg += bank * 0x10; + shift = pin; + if (pull) + writel(1 << shift, reg + SET); + else + writel(1 << shift, reg + CLR); + } } - /* pull */ - if (config & PULL_PRESENT) { - reg = d->base + d->soc->regs->pull; - reg += bank * 0x10; - shift = pin; - if (pull) - writel(1 << shift, reg + SET); - else - writel(1 << shift, reg + CLR); - } - } + /* cache the config value for mxs_pinconf_group_get() */ + g->config = config; - /* cache the config value for mxs_pinconf_group_get() */ - g->config = config; + } /* for each config */ return 0; } diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c index f7c7279d081a..d7c3ae300fa7 100644 --- a/drivers/pinctrl/pinctrl-nomadik.c +++ b/drivers/pinctrl/pinctrl-nomadik.c @@ -1695,7 +1695,7 @@ static int nmk_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin, } static int nmk_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin, - unsigned long config) + unsigned long *configs, unsigned num_configs) { static const char *pullnames[] = { [NMK_GPIO_PULL_NONE] = "none", @@ -1712,20 +1712,9 @@ static int nmk_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin, struct pinctrl_gpio_range *range; struct gpio_chip *chip; unsigned bit; - - /* - * The pin config contains pin number and altfunction fields, here - * we just ignore that part. It's being handled by the framework and - * pinmux callback respectively. - */ - pin_cfg_t cfg = (pin_cfg_t) config; - int pull = PIN_PULL(cfg); - int slpm = PIN_SLPM(cfg); - int output = PIN_DIR(cfg); - int val = PIN_VAL(cfg); - bool lowemi = PIN_LOWEMI(cfg); - bool gpiomode = PIN_GPIOMODE(cfg); - bool sleep = PIN_SLEEPMODE(cfg); + pin_cfg_t cfg; + int pull, slpm, output, val, i; + bool lowemi, gpiomode, sleep; range = nmk_match_gpio_range(pctldev, pin); if (!range) { @@ -1740,54 +1729,74 @@ static int nmk_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin, chip = range->gc; nmk_chip = container_of(chip, struct nmk_gpio_chip, chip); - if (sleep) { - int slpm_pull = PIN_SLPM_PULL(cfg); - int slpm_output = PIN_SLPM_DIR(cfg); - int slpm_val = PIN_SLPM_VAL(cfg); |