diff options
Diffstat (limited to 'drivers/phy')
28 files changed, 2263 insertions, 493 deletions
diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig index 71801e30d601..617cf073e9aa 100644 --- a/drivers/phy/amlogic/Kconfig +++ b/drivers/phy/amlogic/Kconfig @@ -3,12 +3,13 @@ # Phy drivers for Amlogic platforms # config PHY_MESON8B_USB2 - tristate "Meson8, Meson8b and GXBB USB2 PHY driver" + tristate "Meson8, Meson8b, Meson8m2 and GXBB USB2 PHY driver" default ARCH_MESON depends on OF && (ARCH_MESON || COMPILE_TEST) depends on USB_SUPPORT select USB_COMMON select GENERIC_PHY + select REGMAP_MMIO help Enable this to support the Meson USB2 PHYs found in Meson8, Meson8b and GXBB SoCs. @@ -26,18 +27,6 @@ config PHY_MESON_GXL_USB2 GXL and GXM SoCs. If unsure, say N. -config PHY_MESON_GXL_USB3 - tristate "Meson GXL and GXM USB3 PHY drivers" - default ARCH_MESON - depends on OF && (ARCH_MESON || COMPILE_TEST) - depends on USB_SUPPORT - select GENERIC_PHY - select REGMAP_MMIO - help - Enable this to support the Meson USB3 PHY and OTG detection - IP block found in Meson GXL and GXM SoCs. - If unsure, say N. - config PHY_MESON_G12A_USB2 tristate "Meson G12A USB2 PHY driver" default ARCH_MESON diff --git a/drivers/phy/amlogic/Makefile b/drivers/phy/amlogic/Makefile index e2baa133f7af..99702a45e9be 100644 --- a/drivers/phy/amlogic/Makefile +++ b/drivers/phy/amlogic/Makefile @@ -2,7 +2,6 @@ obj-$(CONFIG_PHY_MESON8B_USB2) += phy-meson8b-usb2.o obj-$(CONFIG_PHY_MESON_GXL_USB2) += phy-meson-gxl-usb2.o obj-$(CONFIG_PHY_MESON_G12A_USB2) += phy-meson-g12a-usb2.o -obj-$(CONFIG_PHY_MESON_GXL_USB3) += phy-meson-gxl-usb3.o obj-$(CONFIG_PHY_MESON_G12A_USB3_PCIE) += phy-meson-g12a-usb3-pcie.o obj-$(CONFIG_PHY_MESON_AXG_PCIE) += phy-meson-axg-pcie.o obj-$(CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG) += phy-meson-axg-mipi-pcie-analog.o diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb3.c b/drivers/phy/amlogic/phy-meson-gxl-usb3.c deleted file mode 100644 index c0e9e4c16149..000000000000 --- a/drivers/phy/amlogic/phy-meson-gxl-usb3.c +++ /dev/null @@ -1,283 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Meson GXL USB3 PHY and OTG mode detection driver - * - * Copyright (C) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com> - */ - -#include <linux/bitfield.h> -#include <linux/bitops.h> -#include <linux/clk.h> -#include <linux/module.h> -#include <linux/of_device.h> -#include <linux/phy/phy.h> -#include <linux/regmap.h> -#include <linux/reset.h> -#include <linux/platform_device.h> - -#define USB_R0 0x00 - #define USB_R0_P30_FSEL_MASK GENMASK(5, 0) - #define USB_R0_P30_PHY_RESET BIT(6) - #define USB_R0_P30_TEST_POWERDOWN_HSP BIT(7) - #define USB_R0_P30_TEST_POWERDOWN_SSP BIT(8) - #define USB_R0_P30_ACJT_LEVEL_MASK GENMASK(13, 9) - #define USB_R0_P30_TX_BOOST_LEVEL_MASK GENMASK(16, 14) - #define USB_R0_P30_LANE0_TX2RX_LOOPBACK BIT(17) - #define USB_R0_P30_LANE0_EXT_PCLK_REQ BIT(18) - #define USB_R0_P30_PCS_RX_LOS_MASK_VAL_MASK GENMASK(28, 19) - #define USB_R0_U2D_SS_SCALEDOWN_MODE_MASK GENMASK(30, 29) - #define USB_R0_U2D_ACT BIT(31) - -#define USB_R1 0x04 - #define USB_R1_U3H_BIGENDIAN_GS BIT(0) - #define USB_R1_U3H_PME_ENABLE BIT(1) - #define USB_R1_U3H_HUB_PORT_OVERCURRENT_MASK GENMASK(6, 2) - #define USB_R1_U3H_HUB_PORT_PERM_ATTACH_MASK GENMASK(11, 7) - #define USB_R1_U3H_HOST_U2_PORT_DISABLE_MASK GENMASK(15, 12) - #define USB_R1_U3H_HOST_U3_PORT_DISABLE BIT(16) - #define USB_R1_U3H_HOST_PORT_POWER_CONTROL_PRESENT BIT(17) - #define USB_R1_U3H_HOST_MSI_ENABLE BIT(18) - #define USB_R1_U3H_FLADJ_30MHZ_REG_MASK GENMASK(24, 19) - #define USB_R1_P30_PCS_TX_SWING_FULL_MASK GENMASK(31, 25) - -#define USB_R2 0x08 - #define USB_R2_P30_CR_DATA_IN_MASK GENMASK(15, 0) - #define USB_R2_P30_CR_READ BIT(16) - #define USB_R2_P30_CR_WRITE BIT(17) - #define USB_R2_P30_CR_CAP_ADDR BIT(18) - #define USB_R2_P30_CR_CAP_DATA BIT(19) - #define USB_R2_P30_PCS_TX_DEEMPH_3P5DB_MASK GENMASK(25, 20) - #define USB_R2_P30_PCS_TX_DEEMPH_6DB_MASK GENMASK(31, 26) - -#define USB_R3 0x0c - #define USB_R3_P30_SSC_ENABLE BIT(0) - #define USB_R3_P30_SSC_RANGE_MASK GENMASK(3, 1) - #define USB_R3_P30_SSC_REF_CLK_SEL_MASK GENMASK(12, 4) - #define USB_R3_P30_REF_SSP_EN BIT(13) - #define USB_R3_P30_LOS_BIAS_MASK GENMASK(18, 16) - #define USB_R3_P30_LOS_LEVEL_MASK GENMASK(23, 19) - #define USB_R3_P30_MPLL_MULTIPLIER_MASK GENMASK(30, 24) - -#define USB_R4 0x10 - #define USB_R4_P21_PORT_RESET_0 BIT(0) - #define USB_R4_P21_SLEEP_M0 BIT(1) - #define USB_R4_MEM_PD_MASK GENMASK(3, 2) - #define USB_R4_P21_ONLY BIT(4) - -#define USB_R5 0x14 - #define USB_R5_ID_DIG_SYNC BIT(0) - #define USB_R5_ID_DIG_REG BIT(1) - #define USB_R5_ID_DIG_CFG_MASK GENMASK(3, 2) - #define USB_R5_ID_DIG_EN_0 BIT(4) - #define USB_R5_ID_DIG_EN_1 BIT(5) - #define USB_R5_ID_DIG_CURR BIT(6) - #define USB_R5_ID_DIG_IRQ BIT(7) - #define USB_R5_ID_DIG_TH_MASK GENMASK(15, 8) - #define USB_R5_ID_DIG_CNT_MASK GENMASK(23, 16) - -/* read-only register */ -#define USB_R6 0x18 - #define USB_R6_P30_CR_DATA_OUT_MASK GENMASK(15, 0) - #define USB_R6_P30_CR_ACK BIT(16) - -struct phy_meson_gxl_usb3_priv { - struct regmap *regmap; - enum phy_mode mode; - struct clk *clk_phy; - struct clk *clk_peripheral; - struct reset_control *reset; -}; - -static const struct regmap_config phy_meson_gxl_usb3_regmap_conf = { - .reg_bits = 8, - .val_bits = 32, - .reg_stride = 4, - .max_register = USB_R6, -}; - -static int phy_meson_gxl_usb3_power_on(struct phy *phy) -{ - struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy); - - regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_EN_0, - USB_R5_ID_DIG_EN_0); - regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_EN_1, - USB_R5_ID_DIG_EN_1); - regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_TH_MASK, - FIELD_PREP(USB_R5_ID_DIG_TH_MASK, 0xff)); - - return 0; -} - -static int phy_meson_gxl_usb3_power_off(struct phy *phy) -{ - struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy); - - regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_EN_0, 0); - regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_EN_1, 0); - - return 0; -} - -static int phy_meson_gxl_usb3_set_mode(struct phy *phy, - enum phy_mode mode, int submode) -{ - struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy); - - switch (mode) { - case PHY_MODE_USB_HOST: - regmap_update_bits(priv->regmap, USB_R0, USB_R0_U2D_ACT, 0); - regmap_update_bits(priv->regmap, USB_R4, USB_R4_P21_SLEEP_M0, - 0); - break; - - case PHY_MODE_USB_DEVICE: - regmap_update_bits(priv->regmap, USB_R0, USB_R0_U2D_ACT, - USB_R0_U2D_ACT); - regmap_update_bits(priv->regmap, USB_R4, USB_R4_P21_SLEEP_M0, - USB_R4_P21_SLEEP_M0); - break; - - default: - dev_err(&phy->dev, "unsupported PHY mode %d\n", mode); - return -EINVAL; - } - - priv->mode = mode; - - return 0; -} - -static int phy_meson_gxl_usb3_init(struct phy *phy) -{ - struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy); - int ret; - - ret = reset_control_reset(priv->reset); - if (ret) - goto err; - - ret = clk_prepare_enable(priv->clk_phy); - if (ret) - goto err; - - ret = clk_prepare_enable(priv->clk_peripheral); - if (ret) - goto err_disable_clk_phy; - - ret = phy_meson_gxl_usb3_set_mode(phy, priv->mode, 0); - if (ret) - goto err_disable_clk_peripheral; - - regmap_update_bits(priv->regmap, USB_R1, - USB_R1_U3H_FLADJ_30MHZ_REG_MASK, - FIELD_PREP(USB_R1_U3H_FLADJ_30MHZ_REG_MASK, 0x20)); - - return 0; - -err_disable_clk_peripheral: - clk_disable_unprepare(priv->clk_peripheral); -err_disable_clk_phy: - clk_disable_unprepare(priv->clk_phy); -err: - return ret; -} - -static int phy_meson_gxl_usb3_exit(struct phy *phy) -{ - struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy); - - clk_disable_unprepare(priv->clk_peripheral); - clk_disable_unprepare(priv->clk_phy); - - return 0; -} - -static const struct phy_ops phy_meson_gxl_usb3_ops = { - .power_on = phy_meson_gxl_usb3_power_on, - .power_off = phy_meson_gxl_usb3_power_off, - .set_mode = phy_meson_gxl_usb3_set_mode, - .init = phy_meson_gxl_usb3_init, - .exit = phy_meson_gxl_usb3_exit, - .owner = THIS_MODULE, -}; - -static int phy_meson_gxl_usb3_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct device_node *np = dev->of_node; - struct phy_meson_gxl_usb3_priv *priv; - struct resource *res; - struct phy *phy; - struct phy_provider *phy_provider; - void __iomem *base; - int ret; - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); - if (IS_ERR(base)) - return PTR_ERR(base); - - priv->regmap = devm_regmap_init_mmio(dev, base, - &phy_meson_gxl_usb3_regmap_conf); - if (IS_ERR(priv->regmap)) - return PTR_ERR(priv->regmap); - - priv->clk_phy = devm_clk_get(dev, "phy"); - if (IS_ERR(priv->clk_phy)) - return PTR_ERR(priv->clk_phy); - - priv->clk_peripheral = devm_clk_get(dev, "peripheral"); - if (IS_ERR(priv->clk_peripheral)) - return PTR_ERR(priv->clk_peripheral); - - priv->reset = devm_reset_control_array_get_shared(dev); - if (IS_ERR(priv->reset)) - return PTR_ERR(priv->reset); - - /* - * default to host mode as hardware defaults and/or boot-loader - * behavior can result in this PHY starting up in device mode. this - * default and the initialization in phy_meson_gxl_usb3_init ensure - * that we reproducibly start in a known mode on all devices. - */ - priv->mode = PHY_MODE_USB_HOST; - - phy = devm_phy_create(dev, np, &phy_meson_gxl_usb3_ops); - if (IS_ERR(phy)) { - ret = PTR_ERR(phy); - if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to create PHY\n"); - - return ret; - } - - phy_set_drvdata(phy, priv); - - phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); - - return PTR_ERR_OR_ZERO(phy_provider); -} - -static const struct of_device_id phy_meson_gxl_usb3_of_match[] = { - { .compatible = "amlogic,meson-gxl-usb3-phy", }, - { }, -}; -MODULE_DEVICE_TABLE(of, phy_meson_gxl_usb3_of_match); - -static struct platform_driver phy_meson_gxl_usb3_driver = { - .probe = phy_meson_gxl_usb3_probe, - .driver = { - .name = "phy-meson-gxl-usb3", - .of_match_table = phy_meson_gxl_usb3_of_match, - }, -}; -module_platform_driver(phy_meson_gxl_usb3_driver); - -MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>"); -MODULE_DESCRIPTION("Meson GXL USB3 PHY and OTG detection driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/amlogic/phy-meson8b-usb2.c b/drivers/phy/amlogic/phy-meson8b-usb2.c index bd66bd723e4a..03c061dd5f0d 100644 --- a/drivers/phy/amlogic/phy-meson8b-usb2.c +++ b/drivers/phy/amlogic/phy-meson8b-usb2.c @@ -10,6 +10,8 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/of_device.h> +#include <linux/property.h> +#include <linux/regmap.h> #include <linux/reset.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> @@ -76,6 +78,17 @@ #define REG_ADP_BC_ACA_PIN_FLOAT BIT(26) #define REG_DBG_UART 0x10 + #define REG_DBG_UART_BYPASS_SEL BIT(0) + #define REG_DBG_UART_BYPASS_DM_EN BIT(1) + #define REG_DBG_UART_BYPASS_DP_EN BIT(2) + #define REG_DBG_UART_BYPASS_DM_DATA BIT(3) + #define REG_DBG_UART_BYPASS_DP_DATA BIT(4) + #define REG_DBG_UART_FSV_MINUS BIT(5) + #define REG_DBG_UART_FSV_PLUS BIT(6) + #define REG_DBG_UART_FSV_BURN_IN_TEST BIT(7) + #define REG_DBG_UART_LOOPBACK_EN_B BIT(8) + #define REG_DBG_UART_SET_IDDQ BIT(9) + #define REG_DBG_UART_ATE_RESET BIT(10) #define REG_TEST 0x14 #define REG_TEST_DATA_IN_MASK GENMASK(3, 0) @@ -104,35 +117,30 @@ #define RESET_COMPLETE_TIME 500 #define ACA_ENABLE_COMPLETE_TIME 50 -struct phy_meson8b_usb2_priv { - void __iomem *regs; - enum usb_dr_mode dr_mode; - struct clk *clk_usb_general; - struct clk *clk_usb; - struct reset_control *reset; +struct phy_meson8b_usb2_match_data { + bool host_enable_aca; }; -static u32 phy_meson8b_usb2_read(struct phy_meson8b_usb2_priv *phy_priv, - u32 reg) -{ - return readl(phy_priv->regs + reg); -} - -static void phy_meson8b_usb2_mask_bits(struct phy_meson8b_usb2_priv *phy_priv, - u32 reg, u32 mask, u32 value) -{ - u32 data; - - data = phy_meson8b_usb2_read(phy_priv, reg); - data &= ~mask; - data |= (value & mask); +struct phy_meson8b_usb2_priv { + struct regmap *regmap; + enum usb_dr_mode dr_mode; + struct clk *clk_usb_general; + struct clk *clk_usb; + struct reset_control *reset; + const struct phy_meson8b_usb2_match_data *match; +}; - writel(data, phy_priv->regs + reg); -} +static const struct regmap_config phy_meson8b_usb2_regmap_conf = { + .reg_bits = 8, + .val_bits = 32, + .reg_stride = 4, + .max_register = REG_TUNE, +}; static int phy_meson8b_usb2_power_on(struct phy *phy) { struct phy_meson8b_usb2_priv *priv = phy_get_drvdata(phy); + u32 reg; int ret; if (!IS_ERR_OR_NULL(priv->reset)) { @@ -156,38 +164,43 @@ static int phy_meson8b_usb2_power_on(struct phy *phy) return ret; } - phy_meson8b_usb2_mask_bits(priv, REG_CONFIG, REG_CONFIG_CLK_32k_ALTSEL, - REG_CONFIG_CLK_32k_ALTSEL); + regmap_update_bits(priv->regmap, REG_CONFIG, REG_CONFIG_CLK_32k_ALTSEL, + REG_CONFIG_CLK_32k_ALTSEL); - phy_meson8b_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_REF_CLK_SEL_MASK, - 0x2 << REG_CTRL_REF_CLK_SEL_SHIFT); + regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_REF_CLK_SEL_MASK, + 0x2 << REG_CTRL_REF_CLK_SEL_SHIFT); - phy_meson8b_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_FSEL_MASK, - 0x5 << REG_CTRL_FSEL_SHIFT); + regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_FSEL_MASK, + 0x5 << REG_CTRL_FSEL_SHIFT); /* reset the PHY */ - phy_meson8b_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_POWER_ON_RESET, - REG_CTRL_POWER_ON_RESET); + regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET, + REG_CTRL_POWER_ON_RESET); udelay(RESET_COMPLETE_TIME); - phy_meson8b_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_POWER_ON_RESET, 0); + regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET, 0); udelay(RESET_COMPLETE_TIME); - phy_meson8b_usb2_mask_bits(priv, REG_CTRL, REG_CTRL_SOF_TOGGLE_OUT, - REG_CTRL_SOF_TOGGLE_OUT); + regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_SOF_TOGGLE_OUT, + REG_CTRL_SOF_TOGGLE_OUT); if (priv->dr_mode == USB_DR_MODE_HOST) { - phy_meson8b_usb2_mask_bits(priv, REG_ADP_BC, + regmap_update_bits(priv->regmap, REG_DBG_UART, + REG_DBG_UART_SET_IDDQ, 0); + + if (priv->match->host_enable_aca) { + regmap_update_bits(priv->regmap, REG_ADP_BC, REG_ADP_BC_ACA_ENABLE, REG_ADP_BC_ACA_ENABLE); - udelay(ACA_ENABLE_COMPLETE_TIME); + udelay(ACA_ENABLE_COMPLETE_TIME); - if (phy_meson8b_usb2_read(priv, REG_ADP_BC) & - REG_ADP_BC_ACA_PIN_FLOAT) { - dev_warn(&phy->dev, "USB ID detect failed!\n"); - clk_disable_unprepare(priv->clk_usb); - clk_disable_unprepare(priv->clk_usb_general); - return -EINVAL; + regmap_read(priv->regmap, REG_ADP_BC, ®); + if (reg & REG_ADP_BC_ACA_PIN_FLOAT) { + dev_warn(&phy->dev, "USB ID detect failed!\n"); + clk_disable_unprepare(priv->clk_usb); + clk_disable_unprepare(priv->clk_usb_general); + return -EINVAL; + } } } @@ -198,6 +211,11 @@ static int phy_meson8b_usb2_power_off(struct phy *phy) { struct phy_meson8b_usb2_priv *priv = phy_get_drvdata(phy); + if (priv->dr_mode == USB_DR_MODE_HOST) + regmap_update_bits(priv->regmap, REG_DBG_UART, + REG_DBG_UART_SET_IDDQ, + REG_DBG_UART_SET_IDDQ); + clk_disable_unprepare(priv->clk_usb); clk_disable_unprepare(priv->clk_usb_general); @@ -213,18 +231,26 @@ static const struct phy_ops phy_meson8b_usb2_ops = { static int phy_meson8b_usb2_probe(struct platform_device *pdev) { struct phy_meson8b_usb2_priv *priv; - struct resource *res; struct phy *phy; struct phy_provider *phy_provider; + void __iomem *base; priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - priv->regs = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(priv->regs)) - return PTR_ERR(priv->regs); + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return PTR_ERR(base); + + priv->match = device_get_match_data(&pdev->dev); + if (!priv->match) + return -ENODEV; + + priv->regmap = devm_regmap_init_mmio(&pdev->dev, base, + &phy_meson8b_usb2_regmap_conf); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); priv->clk_usb_general = devm_clk_get(&pdev->dev, "usb_general"); if (IS_ERR(priv->clk_usb_general)) @@ -259,11 +285,32 @@ static int phy_meson8b_usb2_probe(struct platform_device *pdev) return PTR_ERR_OR_ZERO(phy_provider); } +static const struct phy_meson8b_usb2_match_data phy_meson8_usb2_match_data = { + .host_enable_aca = false, +}; + +static const struct phy_meson8b_usb2_match_data phy_meson8b_usb2_match_data = { + .host_enable_aca = true, +}; + static const struct of_device_id phy_meson8b_usb2_of_match[] = { - { .compatible = "amlogic,meson8-usb2-phy", }, - { .compatible = "amlogic,meson8b-usb2-phy", }, - { .compatible = "amlogic,meson-gxbb-usb2-phy", }, - { }, + { + .compatible = "amlogic,meson8-usb2-phy", + .data = &phy_meson8_usb2_match_data + }, + { + .compatible = "amlogic,meson8b-usb2-phy", + .data = &phy_meson8b_usb2_match_data + }, + { + .compatible = "amlogic,meson8m2-usb2-phy", + .data = &phy_meson8b_usb2_match_data + }, + { + .compatible = "amlogic,meson-gxbb-usb2-phy", + .data = &phy_meson8b_usb2_match_data + }, + { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, phy_meson8b_usb2_of_match); @@ -277,5 +324,5 @@ static struct platform_driver phy_meson8b_usb2_driver = { module_platform_driver(phy_meson8b_usb2_driver); MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>"); -MODULE_DESCRIPTION("Meson8, Meson8b and GXBB USB2 PHY driver"); +MODULE_DESCRIPTION("Meson8, Meson8b, Meson8m2 and GXBB USB2 PHY driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c b/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c index 7ceea5ae2704..527625912b78 100644 --- a/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c +++ b/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c @@ -279,7 +279,7 @@ static irqreturn_t gpio_irq_handler(int irq, void *dev_id) return IRQ_HANDLED; } -static struct phy_ops ops = { +static const struct phy_ops ops = { .init = ns2_drd_phy_init, .power_on = ns2_drd_phy_poweron, .power_off = ns2_drd_phy_poweroff, diff --git a/drivers/phy/broadcom/phy-bcm-sr-usb.c b/drivers/phy/broadcom/phy-bcm-sr-usb.c index fe6c58910e4c..77c025a0720c 100644 --- a/drivers/phy/broadcom/phy-bcm-sr-usb.c +++ b/drivers/phy/broadcom/phy-bcm-sr-usb.c @@ -16,8 +16,6 @@ enum bcm_usb_phy_version { }; enum bcm_usb_phy_reg { - PLL_NDIV_FRAC, - PLL_NDIV_INT, PLL_CTRL, PHY_CTRL, PHY_PLL_CTRL, @@ -31,18 +29,11 @@ static const u8 bcm_usb_combo_phy_ss[] = { }; static const u8 bcm_usb_combo_phy_hs[] = { - [PLL_NDIV_FRAC] = 0x04, - [PLL_NDIV_INT] = 0x08, [PLL_CTRL] = 0x0c, [PHY_CTRL] = 0x10, }; -#define HSPLL_NDIV_INT_VAL 0x13 -#define HSPLL_NDIV_FRAC_VAL 0x1005 - static const u8 bcm_usb_hs_phy[] = { - [PLL_NDIV_FRAC] = 0x0, - [PLL_NDIV_INT] = 0x4, [PLL_CTRL] = 0x8, [PHY_CTRL] = 0xc, }; @@ -52,7 +43,6 @@ enum pll_ctrl_bits { SSPLL_SUSPEND_EN, PLL_SEQ_START, PLL_LOCK, - PLL_PDIV, }; static const u8 u3pll_ctrl[] = { @@ -66,29 +56,17 @@ static const u8 u3pll_ctrl[] = { #define HSPLL_PDIV_VAL 0x1 static const u8 u2pll_ctrl[] = { - [PLL_PDIV] = 1, [PLL_RESETB] = 5, [PLL_LOCK] = 6, }; enum bcm_usb_phy_ctrl_bits { CORERDY, - AFE_LDO_PWRDWNB, - AFE_PLL_PWRDWNB, - AFE_BG_PWRDWNB, - PHY_ISO, PHY_RESETB, PHY_PCTL, }; #define PHY_PCTL_MASK 0xffff -/* - * 0x0806 of PCTL_VAL has below bits set - * BIT-8 : refclk divider 1 - * BIT-3:2: device mode; mode is not effect - * BIT-1: soft reset active low - */ -#define HSPHY_PCTL_VAL 0x0806 #define SSPHY_PCTL_VAL 0x0006 static const u8 u3phy_ctrl[] = { @@ -98,10 +76,6 @@ static const u8 u3phy_ctrl[] = { static const u8 u2phy_ctrl[] = { [CORERDY] = 0, - [AFE_LDO_PWRDWNB] = 1, - [AFE_PLL_PWRDWNB] = 2, - [AFE_BG_PWRDWNB] = 3, - [PHY_ISO] = 4, [PHY_RESETB] = 5, [PHY_PCTL] = 6, }; @@ -186,38 +160,13 @@ static int bcm_usb_hs_phy_init(struct bcm_usb_phy_cfg *phy_cfg) int ret = 0; void __iomem *regs = phy_cfg->regs; const u8 *offset; - u32 rd_data; offset = phy_cfg->offset; - writel(HSPLL_NDIV_INT_VAL, regs + offset[PLL_NDIV_INT]); - writel(HSPLL_NDIV_FRAC_VAL, regs + offset[PLL_NDIV_FRAC]); - - rd_data = readl(regs + offset[PLL_CTRL]); - rd_data &= ~(HSPLL_PDIV_MASK << u2pll_ctrl[PLL_PDIV]); - rd_data |= (HSPLL_PDIV_VAL << u2pll_ctrl[PLL_PDIV]); - writel(rd_data, regs + offset[PLL_CTRL]); - - /* Set Core Ready high */ - bcm_usb_reg32_setbits(regs + offset[PHY_CTRL], - BIT(u2phy_ctrl[CORERDY])); - - /* Maximum timeout for Core Ready done */ - msleep(30); - + bcm_usb_reg32_clrbits(regs + offset[PLL_CTRL], + BIT(u2pll_ctrl[PLL_RESETB])); bcm_usb_reg32_setbits(regs + offset[PLL_CTRL], BIT(u2pll_ctrl[PLL_RESETB])); - bcm_usb_reg32_setbits(regs + offset[PHY_CTRL], - BIT(u2phy_ctrl[PHY_RESETB])); - - - rd_data = readl(regs + offset[PHY_CTRL]); - rd_data &= ~(PHY_PCTL_MASK << u2phy_ctrl[PHY_PCTL]); - rd_data |= (HSPHY_PCTL_VAL << u2phy_ctrl[PHY_PCTL]); - writel(rd_data, regs + offset[PHY_CTRL]); - - /* Maximum timeout for PLL reset done */ - msleep(30); ret = bcm_usb_pll_lock_check(regs + offset[PLL_CTRL], BIT(u2pll_ctrl[PLL_LOCK])); @@ -256,7 +205,7 @@ static int bcm_usb_phy_init(struct phy *phy) return ret; } -static struct phy_ops sr_phy_ops = { +static const struct phy_ops sr_phy_ops = { .init = bcm_usb_phy_init, .reset = bcm_usb_phy_reset, .owner = THIS_MODULE, diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c index 491bbd46c5b3..99fbc7e4138b 100644 --- a/drivers/phy/broadcom/phy-brcm-usb.c +++ b/drivers/phy/broadcom/phy-brcm-usb.c @@ -39,14 +39,14 @@ struct match_chip_info { u8 optional_reg; }; -static struct value_to_name_map brcm_dr_mode_to_name[] = { +static const struct value_to_name_map brcm_dr_mode_to_name[] = { { USB_CTLR_MODE_HOST, "host" }, { USB_CTLR_MODE_DEVICE, "peripheral" }, { USB_CTLR_MODE_DRD, "drd" }, { USB_CTLR_MODE_TYPEC_PD, "typec-pd" } }; -static struct value_to_name_map brcm_dual_mode_to_name[] = { +static const struct value_to_name_map brcm_dual_mode_to_name[] = { { 0, "host" }, { 1, "device" }, { 2, "auto" }, @@ -138,7 +138,7 @@ static int brcm_usb_phy_exit(struct phy *gphy) return 0; } -static struct phy_ops brcm_usb_phy_ops = { +static const struct phy_ops brcm_usb_phy_ops = { .init = brcm_usb_phy_init, .exit = brcm_usb_phy_exit, .owner = THIS_MODULE, @@ -170,7 +170,7 @@ static struct phy *brcm_usb_phy_xlate(struct device *dev, return ERR_PTR(-ENODEV); } -static int name_to_value(struct value_to_name_map *table, int count, +static int name_to_value(const struct value_to_name_map *table, int count, const char *name, int *value) { int x; @@ -185,7 +185,7 @@ static int name_to_value(struct value_to_name_map *table, int count, return -EINVAL; } -static const char *value_to_name(struct value_to_name_map *table, int count, +static const char *value_to_name(const struct value_to_name_map *table, int count, int value) { if (value >= count) @@ -252,7 +252,7 @@ static const struct attribute_group brcm_usb_phy_group = { .attrs = brcm_usb_phy_attrs, }; -static struct match_chip_info chip_info_7216 = { +static const struct match_chip_info chip_info_7216 = { .init_func = &brcm_usb_dvr_init_7216, .required_regs = { BRCM_REGS_CTRL, @@ -262,7 +262,7 @@ static struct match_chip_info chip_info_7216 = { }, }; -static struct match_chip_info chip_info_7211b0 = { +static const struct match_chip_info chip_info_7211b0 = { .init_func = &brcm_usb_dvr_init_7211b0, .required_regs = { BRCM_REGS_CTRL, @@ -275,7 +275,7 @@ static struct match_chip_info chip_info_7211b0 = { .optional_reg = BRCM_REGS_BDC_EC, }; -static struct match_chip_info chip_info_7445 = { +static const struct match_chip_info chip_info_7445 = { .init_func = &brcm_usb_dvr_init_7445, .required_regs = { BRCM_REGS_CTRL, diff --git a/drivers/phy/cadence/Kconfig b/drivers/phy/cadence/Kconfig index 459545871608..432832bdbd16 100644 --- a/drivers/phy/cadence/Kconfig +++ b/drivers/phy/cadence/Kconfig @@ -27,3 +27,12 @@ config PHY_CADENCE_SIERRA select GENERIC_PHY help Enable this to support the Cadence Sierra PHY driver + +config PHY_CADENCE_SALVO + tristate "Cadence Salvo PHY Driver" + depends on OF && HAS_IOMEM + select GENERIC_PHY + help + Enable this to support the Cadence SALVO PHY driver, + this PHY is a legacy PHY, and only are used for USB3 + and USB2. diff --git a/drivers/phy/cadence/Makefile b/drivers/phy/cadence/Makefile index 6a7ffc6ea599..26e16bd34efe 100644 --- a/drivers/phy/cadence/Makefile +++ b/drivers/phy/cadence/Makefile @@ -2,3 +2,4 @@ obj-$(CONFIG_PHY_CADENCE_TORRENT) += phy-cadence-torrent.o obj-$(CONFIG_PHY_CADENCE_DPHY) += cdns-dphy.o obj-$(CONFIG_PHY_CADENCE_SIERRA) += phy-cadence-sierra.o +obj-$(CONFIG_PHY_CADENCE_SALVO) += phy-cadence-salvo.o diff --git a/drivers/phy/cadence/phy-cadence-salvo.c b/drivers/phy/cadence/phy-cadence-salvo.c new file mode 100644 index 000000000000..1ecbb964cd21 --- /dev/null +++ b/drivers/phy/cadence/phy-cadence-salvo.c @@ -0,0 +1,325 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Salvo PHY is a 28nm PHY, it is a legacy PHY, and only + * for USB3 and USB2. + * + * Copyright (c) 2019-2020 NXP + */ + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/of.h> +#include <linux/of_platform.h> + +/* PHY register definition */ +#define PHY_PMA_CMN_CTRL1 0xC800 +#define TB_ADDR_CMN_DIAG_HSCLK_SEL 0x01e0 +#define TB_ADDR_CMN_PLL0_VCOCAL_INIT_TMR 0x0084 +#define TB_ADDR_CMN_PLL0_VCOCAL_ITER_TMR 0x0085 +#define TB_ADDR_CMN_PLL0_INTDIV 0x0094 +#define TB_ADDR_CMN_PLL0_FRACDIV 0x0095 |