diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c')
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c | 1058 |
1 files changed, 0 insertions, 1058 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c deleted file mode 100644 index 98605fc7ad37..000000000000 --- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c +++ /dev/null @@ -1,1058 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. - * - * Portions of this file are derived from the ipw3945 project, as well - * as portions of the ieee80211 subsystem header files. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ -#include <linux/sched.h> -#include <linux/wait.h> -#include <linux/gfp.h> - -#include "iwl-prph.h" -#include "iwl-io.h" -#include "iwl-trans-pcie-int.h" -#include "iwl-op-mode.h" - -#ifdef CONFIG_IWLWIFI_IDI -#include "iwl-amfh.h" -#endif - -/****************************************************************************** - * - * RX path functions - * - ******************************************************************************/ - -/* - * Rx theory of operation - * - * Driver allocates a circular buffer of Receive Buffer Descriptors (RBDs), - * each of which point to Receive Buffers to be filled by the NIC. These get - * used not only for Rx frames, but for any command response or notification - * from the NIC. The driver and NIC manage the Rx buffers by means - * of indexes into the circular buffer. - * - * Rx Queue Indexes - * The host/firmware share two index registers for managing the Rx buffers. - * - * The READ index maps to the first position that the firmware may be writing - * to -- the driver can read up to (but not including) this position and get - * good data. - * The READ index is managed by the firmware once the card is enabled. - * - * The WRITE index maps to the last position the driver has read from -- the - * position preceding WRITE is the last slot the firmware can place a packet. - * - * The queue is empty (no good data) if WRITE = READ - 1, and is full if - * WRITE = READ. - * - * During initialization, the host sets up the READ queue position to the first - * INDEX position, and WRITE to the last (READ - 1 wrapped) - * - * When the firmware places a packet in a buffer, it will advance the READ index - * and fire the RX interrupt. The driver can then query the READ index and - * process as many packets as possible, moving the WRITE index forward as it - * resets the Rx queue buffers with new memory. - * - * The management in the driver is as follows: - * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When - * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled - * to replenish the iwl->rxq->rx_free. - * + In iwl_rx_replenish (scheduled) if 'processed' != 'read' then the - * iwl->rxq is replenished and the READ INDEX is updated (updating the - * 'processed' and 'read' driver indexes as well) - * + A received packet is processed and handed to the kernel network stack, - * detached from the iwl->rxq. The driver 'processed' index is updated. - * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free - * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ - * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there - * were enough free buffers and RX_STALLED is set it is cleared. - * - * - * Driver sequence: - * - * iwl_rx_queue_alloc() Allocates rx_free - * iwl_rx_replenish() Replenishes rx_free list from rx_used, and calls - * iwl_rx_queue_restock - * iwl_rx_queue_restock() Moves available buffers from rx_free into Rx - * queue, updates firmware pointers, and updates - * the WRITE index. If insufficient rx_free buffers - * are available, schedules iwl_rx_replenish - * - * -- enable interrupts -- - * ISR - iwl_rx() Detach iwl_rx_mem_buffers from pool up to the - * READ INDEX, detaching the SKB from the pool. - * Moves the packet buffer from queue to rx_used. - * Calls iwl_rx_queue_restock to refill any empty - * slots. - * ... - * - */ - -/** - * iwl_rx_queue_space - Return number of free slots available in queue. - */ -static int iwl_rx_queue_space(const struct iwl_rx_queue *q) -{ - int s = q->read - q->write; - if (s <= 0) - s += RX_QUEUE_SIZE; - /* keep some buffer to not confuse full and empty queue */ - s -= 2; - if (s < 0) - s = 0; - return s; -} - -/** - * iwl_rx_queue_update_write_ptr - Update the write pointer for the RX queue - */ -void iwl_rx_queue_update_write_ptr(struct iwl_trans *trans, - struct iwl_rx_queue *q) -{ - unsigned long flags; - u32 reg; - - spin_lock_irqsave(&q->lock, flags); - - if (q->need_update == 0) - goto exit_unlock; - - if (trans->cfg->base_params->shadow_reg_enable) { - /* shadow register enabled */ - /* Device expects a multiple of 8 */ - q->write_actual = (q->write & ~0x7); - iwl_write32(trans, FH_RSCSR_CHNL0_WPTR, q->write_actual); - } else { - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - - /* If power-saving is in use, make sure device is awake */ - if (test_bit(STATUS_TPOWER_PMI, &trans_pcie->status)) { - reg = iwl_read32(trans, CSR_UCODE_DRV_GP1); - - if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) { - IWL_DEBUG_INFO(trans, - "Rx queue requesting wakeup," - " GP1 = 0x%x\n", reg); - iwl_set_bit(trans, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); - goto exit_unlock; - } - - q->write_actual = (q->write & ~0x7); - iwl_write_direct32(trans, FH_RSCSR_CHNL0_WPTR, - q->write_actual); - - /* Else device is assumed to be awake */ - } else { - /* Device expects a multiple of 8 */ - q->write_actual = (q->write & ~0x7); - iwl_write_direct32(trans, FH_RSCSR_CHNL0_WPTR, - q->write_actual); - } - } - q->need_update = 0; - - exit_unlock: - spin_unlock_irqrestore(&q->lock, flags); -} - -/** - * iwlagn_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr - */ -static inline __le32 iwlagn_dma_addr2rbd_ptr(dma_addr_t dma_addr) -{ - return cpu_to_le32((u32)(dma_addr >> 8)); -} - -/** - * iwlagn_rx_queue_restock - refill RX queue from pre-allocated pool - * - * If there are slots in the RX queue that need to be restocked, - * and we have free pre-allocated buffers, fill the ranks as much - * as we can, pulling from rx_free. - * - * This moves the 'write' index forward to catch up with 'processed', and - * also updates the memory address in the firmware to reference the new - * target buffer. - */ -static void iwlagn_rx_queue_restock(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - struct iwl_rx_queue *rxq = &trans_pcie->rxq; - struct list_head *element; - struct iwl_rx_mem_buffer *rxb; - unsigned long flags; - - spin_lock_irqsave(&rxq->lock, flags); - while ((iwl_rx_queue_space(rxq) > 0) && (rxq->free_count)) { - /* The overwritten rxb must be a used one */ - rxb = rxq->queue[rxq->write]; - BUG_ON(rxb && rxb->page); - - /* Get next free Rx buffer, remove from free list */ - element = rxq->rx_free.next; - rxb = list_entry(element, struct iwl_rx_mem_buffer, list); - list_del(element); - - /* Point to Rx buffer via next RBD in circular buffer */ - rxq->bd[rxq->write] = iwlagn_dma_addr2rbd_ptr(rxb->page_dma); - rxq->queue[rxq->write] = rxb; - rxq->write = (rxq->write + 1) & RX_QUEUE_MASK; - rxq->free_count--; - } - spin_unlock_irqrestore(&rxq->lock, flags); - /* If the pre-allocated buffer pool is dropping low, schedule to - * refill it */ - if (rxq->free_count <= RX_LOW_WATERMARK) - schedule_work(&trans_pcie->rx_replenish); - - - /* If we've added more space for the firmware to place data, tell it. - * Increment device's write pointer in multiples of 8. */ - if (rxq->write_actual != (rxq->write & ~0x7)) { - spin_lock_irqsave(&rxq->lock, flags); - rxq->need_update = 1; - spin_unlock_irqrestore(&rxq->lock, flags); - iwl_rx_queue_update_write_ptr(trans, rxq); - } -} - -/** - * iwlagn_rx_replenish - Move all used packet from rx_used to rx_free - * - * When moving to rx_free an SKB is allocated for the slot. - * - * Also restock the Rx queue via iwl_rx_queue_restock. - * This is called as a scheduled work item (except for during initialization) - */ -static void iwlagn_rx_allocate(struct iwl_trans *trans, gfp_t priority) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - struct iwl_rx_queue *rxq = &trans_pcie->rxq; - struct list_head *element; - struct iwl_rx_mem_buffer *rxb; - struct page *page; - unsigned long flags; - gfp_t gfp_mask = priority; - - while (1) { - spin_lock_irqsave(&rxq->lock, flags); - if (list_empty(&rxq->rx_used)) { - spin_unlock_irqrestore(&rxq->lock, flags); - return; - } - spin_unlock_irqrestore(&rxq->lock, flags); - - if (rxq->free_count > RX_LOW_WATERMARK) - gfp_mask |= __GFP_NOWARN; - - if (trans_pcie->rx_page_order > 0) - gfp_mask |= __GFP_COMP; - - /* Alloc a new receive buffer */ - page = alloc_pages(gfp_mask, trans_pcie->rx_page_order); - if (!page) { - if (net_ratelimit()) - IWL_DEBUG_INFO(trans, "alloc_pages failed, " - "order: %d\n", - trans_pcie->rx_page_order); - - if ((rxq->free_count <= RX_LOW_WATERMARK) && - net_ratelimit()) - IWL_CRIT(trans, "Failed to alloc_pages with %s." - "Only %u free buffers remaining.\n", - priority == GFP_ATOMIC ? - "GFP_ATOMIC" : "GFP_KERNEL", - rxq->free_count); - /* We don't reschedule replenish work here -- we will - * call the restock method and if it still needs - * more buffers it will schedule replenish */ - return; - } - - spin_lock_irqsave(&rxq->lock, flags); - - if (list_empty(&rxq->rx_used)) { - spin_unlock_irqrestore(&rxq->lock, flags); - __free_pages(page, trans_pcie->rx_page_order); - return; - } - element = rxq->rx_used.next; - rxb = list_entry(element, struct iwl_rx_mem_buffer, list); - list_del(element); - - spin_unlock_irqrestore(&rxq->lock, flags); - - BUG_ON(rxb->page); - rxb->page = page; - /* Get physical address of the RB */ - rxb->page_dma = - dma_map_page(trans->dev, page, 0, - PAGE_SIZE << trans_pcie->rx_page_order, - DMA_FROM_DEVICE); - /* dma address must be no more than 36 bits */ - BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36)); - /* and also 256 byte aligned! */ - BUG_ON(rxb->page_dma & DMA_BIT_MASK(8)); - - spin_lock_irqsave(&rxq->lock, flags); - - list_add_tail(&rxb->list, &rxq->rx_free); - rxq->free_count++; - - spin_unlock_irqrestore(&rxq->lock, flags); - } -} - -void iwlagn_rx_replenish(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - unsigned long flags; - - iwlagn_rx_allocate(trans, GFP_KERNEL); - - spin_lock_irqsave(&trans_pcie->irq_lock, flags); - iwlagn_rx_queue_restock(trans); - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); -} - -static void iwlagn_rx_replenish_now(struct iwl_trans *trans) -{ - iwlagn_rx_allocate(trans, GFP_ATOMIC); - - iwlagn_rx_queue_restock(trans); -} - -void iwl_bg_rx_replenish(struct work_struct *data) -{ - struct iwl_trans_pcie *trans_pcie = - container_of(data, struct iwl_trans_pcie, rx_replenish); - - iwlagn_rx_replenish(trans_pcie->trans); -} - -static void iwl_rx_handle_rxbuf(struct iwl_trans *trans, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - struct iwl_rx_queue *rxq = &trans_pcie->rxq; - struct iwl_tx_queue *txq = &trans_pcie->txq[trans_pcie->cmd_queue]; - unsigned long flags; - bool page_stolen = false; - int max_len = PAGE_SIZE << trans_pcie->rx_page_order; - u32 offset = 0; - - if (WARN_ON(!rxb)) - return; - - dma_unmap_page(trans->dev, rxb->page_dma, max_len, DMA_FROM_DEVICE); - - while (offset + sizeof(u32) + sizeof(struct iwl_cmd_header) < max_len) { - struct iwl_rx_packet *pkt; - struct iwl_device_cmd *cmd; - u16 sequence; - bool reclaim; - int index, cmd_index, err, len; - struct iwl_rx_cmd_buffer rxcb = { - ._offset = offset, - ._page = rxb->page, - ._page_stolen = false, - .truesize = max_len, - }; - - pkt = rxb_addr(&rxcb); - - if (pkt->len_n_flags == cpu_to_le32(FH_RSCSR_FRAME_INVALID)) - break; - - IWL_DEBUG_RX(trans, "cmd at offset %d: %s (0x%.2x)\n", - rxcb._offset, - trans_pcie_get_cmd_string(trans_pcie, pkt->hdr.cmd), - pkt->hdr.cmd); - - len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; - len += sizeof(u32); /* account for status word */ - trace_iwlwifi_dev_rx(trans->dev, pkt, len); - - /* Reclaim a command buffer only if this packet is a response - * to a (driver-originated) command. - * If the packet (e.g. Rx frame) originated from uCode, - * there is no command buffer to reclaim. - * Ucode should set SEQ_RX_FRAME bit if ucode-originated, - * but apparently a few don't get set; catch them here. */ - reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME); - if (reclaim) { - int i; - - for (i = 0; i < trans_pcie->n_no_reclaim_cmds; i++) { - if (trans_pcie->no_reclaim_cmds[i] == - pkt->hdr.cmd) { - reclaim = false; - break; - } - } - } - - sequence = le16_to_cpu(pkt->hdr.sequence); - index = SEQ_TO_INDEX(sequence); - cmd_index = get_cmd_index(&txq->q, index); - - if (reclaim) - cmd = txq->entries[cmd_index].cmd; - else - cmd = NULL; - - err = iwl_op_mode_rx(trans->op_mode, &rxcb, cmd); - - /* - * After here, we should always check rxcb._page_stolen, - * if it is true then one of the handlers took the page. - */ - - if (reclaim) { - /* Invoke any callbacks, transfer the buffer to caller, - * and fire off the (possibly) blocking - * iwl_trans_send_cmd() - * as we reclaim the driver command queue */ - if (!rxcb._page_stolen) - iwl_tx_cmd_complete(trans, &rxcb, err); - else - IWL_WARN(trans, "Claim null rxb?\n"); - } - - page_stolen |= rxcb._page_stolen; - offset += ALIGN(len, FH_RSCSR_FRAME_ALIGN); - } - - /* page was stolen from us -- free our reference */ - if (page_stolen) { - __free_pages(rxb->page, trans_pcie->rx_page_order); - rxb->page = NULL; - } - - /* Reuse the page if possible. For notification packets and - * SKBs that fail to Rx correctly, add them back into the - * rx_free list for reuse later. */ - spin_lock_irqsave(&rxq->lock, flags); - if (rxb->page != NULL) { - rxb->page_dma = - dma_map_page(trans->dev, rxb->page, 0, - PAGE_SIZE << trans_pcie->rx_page_order, - DMA_FROM_DEVICE); - list_add_tail(&rxb->list, &rxq->rx_free); - rxq->free_count++; - } else - list_add_tail(&rxb->list, &rxq->rx_used); - spin_unlock_irqrestore(&rxq->lock, flags); -} - -/** - * iwl_rx_handle - Main entry function for receiving responses from uCode - * - * Uses the priv->rx_handlers callback function array to invoke - * the appropriate handlers, including command responses, - * frame-received notifications, and other notifications. - */ -static void iwl_rx_handle(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - struct iwl_rx_queue *rxq = &trans_pcie->rxq; - u32 r, i; - u8 fill_rx = 0; - u32 count = 8; - int total_empty; - - /* uCode's read index (stored in shared DRAM) indicates the last Rx - * buffer that the driver may process (last buffer filled by ucode). */ - r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF; - i = rxq->read; - - /* Rx interrupt, but nothing sent from uCode */ - if (i == r) - IWL_DEBUG_RX(trans, "HW = SW = %d\n", r); - - /* calculate total frames need to be restock after handling RX */ - total_empty = r - rxq->write_actual; - if (total_empty < 0) - total_empty += RX_QUEUE_SIZE; - - if (total_empty > (RX_QUEUE_SIZE / 2)) - fill_rx = 1; - - while (i != r) { - struct iwl_rx_mem_buffer *rxb; - - rxb = rxq->queue[i]; - rxq->queue[i] = NULL; - - IWL_DEBUG_RX(trans, "rxbuf: HW = %d, SW = %d (%p)\n", - r, i, rxb); - iwl_rx_handle_rxbuf(trans, rxb); - - i = (i + 1) & RX_QUEUE_MASK; - /* If there are a lot of unused frames, - * restock the Rx queue so ucode wont assert. */ - if (fill_rx) { - count++; - if (count >= 8) { - rxq->read = i; - iwlagn_rx_replenish_now(trans); - count = 0; - } - } - } - - /* Backtrack one entry */ - rxq->read = i; - if (fill_rx) - iwlagn_rx_replenish_now(trans); - else - iwlagn_rx_queue_restock(trans); -} - -/** - * iwl_irq_handle_error - called for HW or SW error interrupt from card - */ -static void iwl_irq_handle_error(struct iwl_trans *trans) -{ - /* W/A for WiFi/WiMAX coex and WiMAX own the RF */ - if (trans->cfg->internal_wimax_coex && - (!(iwl_read_prph(trans, APMG_CLK_CTRL_REG) & - APMS_CLK_VAL_MRB_FUNC_MODE) || - (iwl_read_prph(trans, APMG_PS_CTRL_REG) & - APMG_PS_CTRL_VAL_RESET_REQ))) { - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - - clear_bit(STATUS_HCMD_ACTIVE, &trans_pcie->status); - iwl_op_mode_wimax_active(trans->op_mode); - wake_up(&trans->wait_command_queue); - return; - } - - iwl_dump_csr(trans); - iwl_dump_fh(trans, NULL, false); - - iwl_op_mode_nic_error(trans->op_mode); -} - -/* tasklet for iwlagn interrupt */ -void iwl_irq_tasklet(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - struct isr_statistics *isr_stats = &trans_pcie->isr_stats; - u32 inta = 0; - u32 handled = 0; - unsigned long flags; - u32 i; -#ifdef CONFIG_IWLWIFI_DEBUG - u32 inta_mask; -#endif - - spin_lock_irqsave(&trans_pcie->irq_lock, flags); - - /* Ack/clear/reset pending uCode interrupts. - * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS, - */ - /* There is a hardware bug in the interrupt mask function that some - * interrupts (i.e. CSR_INT_BIT_SCD) can still be generated even if - * they are disabled in the CSR_INT_MASK register. Furthermore the - * ICT interrupt handling mechanism has another bug that might cause - * these unmasked interrupts fail to be detected. We workaround the - * hardware bugs here by ACKing all the possible interrupts so that - * interrupt coalescing can still be achieved. - */ - iwl_write32(trans, CSR_INT, - trans_pcie->inta | ~trans_pcie->inta_mask); - - inta = trans_pcie->inta; - -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_have_debug_level(IWL_DL_ISR)) { - /* just for debug */ - inta_mask = iwl_read32(trans, CSR_INT_MASK); - IWL_DEBUG_ISR(trans, "inta 0x%08x, enabled 0x%08x\n", - inta, inta_mask); - } -#endif - - /* saved interrupt in inta variable now we can reset trans_pcie->inta */ - trans_pcie->inta = 0; - - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); - - /* Now service all interrupt bits discovered above. */ - if (inta & CSR_INT_BIT_HW_ERR) { - IWL_ERR(trans, "Hardware error detected. Restarting.\n"); - - /* Tell the device to stop sending interrupts */ - iwl_disable_interrupts(trans); - - isr_stats->hw++; - iwl_irq_handle_error(trans); - - handled |= CSR_INT_BIT_HW_ERR; - - return; - } - -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_have_debug_level(IWL_DL_ISR)) { - /* NIC fires this, but we don't use it, redundant with WAKEUP */ - if (inta & CSR_INT_BIT_SCD) { - IWL_DEBUG_ISR(trans, "Scheduler finished to transmit " - "the frame/frames.\n"); - isr_stats->sch++; - } - - /* Alive notification via Rx interrupt will do the real work */ - if (inta & CSR_INT_BIT_ALIVE) { - IWL_DEBUG_ISR(trans, "Alive interrupt\n"); - isr_stats->alive++; - } - } -#endif - /* Safely ignore these bits for debug checks below */ - inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE); - - /* HW RF KILL switch toggled */ - if (inta & CSR_INT_BIT_RF_KILL) { - bool hw_rfkill; - - hw_rfkill = iwl_is_rfkill_set(trans); - IWL_WARN(trans, "RF_KILL bit toggled to %s.\n", - hw_rfkill ? "disable radio" : "enable radio"); - - isr_stats->rfkill++; - - iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill); - - handled |= CSR_INT_BIT_RF_KILL; - } - - /* Chip got too hot and stopped itself */ - if (inta & CSR_INT_BIT_CT_KILL) { - IWL_ERR(trans, "Microcode CT kill error detected.\n"); - isr_stats->ctkill++; - handled |= CSR_INT_BIT_CT_KILL; - } - - /* Error detected by uCode */ - if (inta & CSR_INT_BIT_SW_ERR) { - IWL_ERR(trans, "Microcode SW error detected. " - " Restarting 0x%X.\n", inta); - isr_stats->sw++; - iwl_irq_handle_error(trans); - handled |= CSR_INT_BIT_SW_ERR; - } - - /* uCode wakes up after power-down sleep */ - if (inta & CSR_INT_BIT_WAKEUP) { - IWL_DEBUG_ISR(trans, "Wakeup interrupt\n"); - iwl_rx_queue_update_write_ptr(trans, &trans_pcie->rxq); - for (i = 0; i < trans->cfg->base_params->num_of_queues; i++) - iwl_txq_update_write_ptr(trans, - &trans_pcie->txq[i]); - - isr_stats->wakeup++; - - handled |= CSR_INT_BIT_WAKEUP; - } - - /* All uCode command responses, including Tx command responses, - * Rx "responses" (frame-received notification), and other - * notifications from uCode come through here*/ - if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX | - CSR_INT_BIT_RX_PERIODIC)) { - IWL_DEBUG_ISR(trans, "Rx interrupt\n"); - if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) { - handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX); - iwl_write32(trans, CSR_FH_INT_STATUS, - CSR_FH_INT_RX_MASK); - } - if (inta & CSR_INT_BIT_RX_PERIODIC) { - handled |= CSR_INT_BIT_RX_PERIODIC; - iwl_write32(trans, - CSR_INT, CSR_INT_BIT_RX_PERIODIC); - } - /* Sending RX interrupt require many steps to be done in the - * the device: - * 1- write interrupt to current index in ICT table. - * 2- dma RX frame. - * 3- update RX shared data to indicate last write index. - * 4- send interrupt. - * This could lead to RX race, driver could receive RX interrupt - * but the shared data changes does not reflect this; - * periodic interrupt will detect any dangling Rx activity. - */ - - /* Disable periodic interrupt; we use it as just a one-shot. */ - iwl_write8(trans, CSR_INT_PERIODIC_REG, - CSR_INT_PERIODIC_DIS); -#ifdef CONFIG_IWLWIFI_IDI - iwl_amfh_rx_handler(); -#else - iwl_rx_handle(trans); -#endif - /* - * Enable periodic interrupt in 8 msec only if we received - * real RX interrupt (instead of just periodic int), to catch - * any dangling Rx interrupt. If it was just the periodic - * interrupt, there was no dangling Rx activity, and no need - * to extend the periodic interrupt; one-shot is enough. - */ - if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) - iwl_write8(trans, CSR_INT_PERIODIC_REG, - CSR_INT_PERIODIC_ENA); - - isr_stats->rx++; - } - - /* This "Tx" DMA channel is used only for loading uCode */ - if (inta & CSR_INT_BIT_FH_TX) { - iwl_write32(trans, CSR_FH_INT_STATUS, CSR_FH_INT_TX_MASK); - IWL_DEBUG_ISR(trans, "uCode load interrupt\n"); - isr_stats->tx++; - handled |= CSR_INT_BIT_FH_TX; - /* Wake up uCode load routine, now that load is complete */ - trans_pcie->ucode_write_complete = true; - wake_up(&trans_pcie->ucode_write_waitq); - } - - if (inta & ~handled) { - IWL_ERR(trans, "Unhandled INTA bits 0x%08x\n", inta & ~handled); - isr_stats->unhandled++; - } - - if (inta & ~(trans_pcie->inta_mask)) { - IWL_WARN(trans, "Disabled INTA bits 0x%08x were pending\n", - inta & ~trans_pcie->inta_mask); - } - - /* Re-enable all interrupts */ - /* only Re-enable if disabled by irq */ - if (test_bit(STATUS_INT_ENABLED, &trans_pcie->status)) - iwl_enable_interrupts(trans); - /* Re-enable RF_KILL if it occurred */ - else if (handled & CSR_INT_BIT_RF_KILL) - iwl_enable_rfkill_int(trans); -} - -/****************************************************************************** - * - * ICT functions - * - ******************************************************************************/ - -/* a device (PCI-E) page is 4096 bytes long */ -#define ICT_SHIFT 12 -#define ICT_SIZE (1 << ICT_SHIFT) -#define ICT_COUNT (ICT_SIZE / sizeof(u32)) - -/* Free dram table */ -void iwl_free_isr_ict(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - - if (trans_pcie->ict_tbl) { - dma_free_coherent(trans->dev, ICT_SIZE, - trans_pcie->ict_tbl, - trans_pcie->ict_tbl_dma); - trans_pcie->ict_tbl = NULL; - trans_pcie->ict_tbl_dma = 0; - } -} - - -/* - * allocate dram shared table, it is an aligned memory - * block of ICT_SIZE. - * also reset all data related to ICT table interrupt. - */ -int iwl_alloc_isr_ict(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - - trans_pcie->ict_tbl = - dma_alloc_coherent(trans->dev, ICT_SIZE, - &trans_pcie->ict_tbl_dma, - GFP_KERNEL); - if (!trans_pcie->ict_tbl) - return -ENOMEM; - - /* just an API sanity check ... it is guaranteed to be aligned */ - if (WARN_ON(trans_pcie->ict_tbl_dma & (ICT_SIZE - 1))) { - iwl_free_isr_ict(trans); - return -EINVAL; - } - - IWL_DEBUG_ISR(trans, "ict dma addr %Lx\n", - (unsigned long long)trans_pcie->ict_tbl_dma); - - IWL_DEBUG_ISR(trans, "ict vir addr %p\n", trans_pcie->ict_tbl); - - /* reset table and index to all 0 */ - memset(trans_pcie->ict_tbl, 0, ICT_SIZE); - trans_pcie->ict_index = 0; - - /* add periodic RX interrupt */ - trans_pcie->inta_mask |= CSR_INT_BIT_RX_PERIODIC; - return 0; -} - -/* Device is going up inform it about using ICT interrupt table, - * also we need to tell the driver to start using ICT interrupt. - */ -void iwl_reset_ict(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - u32 val; - unsigned long flags; - - if (!trans_pcie->ict_tbl) - return; - - spin_lock_irqsave(&trans_pcie->irq_lock, flags); - iwl_disable_interrupts(trans); - - memset(trans_pcie->ict_tbl, 0, ICT_SIZE); - - val = trans_pcie->ict_tbl_dma >> ICT_SHIFT; - - val |= CSR_DRAM_INT_TBL_ENABLE; - val |= CSR_DRAM_INIT_TBL_WRAP_CHECK; - - IWL_DEBUG_ISR(trans, "CSR_DRAM_INT_TBL_REG =0x%x\n", val); - - iwl_write32(trans, CSR_DRAM_INT_TBL_REG, val); - trans_pcie->use_ict = true; - trans_pcie->ict_index = 0; - iwl_write32(trans, CSR_INT, trans_pcie->inta_mask); - iwl_enable_interrupts(trans); - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); -} - -/* Device is going down disable ict interrupt usage */ -void iwl_disable_ict(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - unsigned long flags; - - spin_lock_irqsave(&trans_pcie->irq_lock, flags); - trans_pcie->use_ict = false; - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); -} - -static irqreturn_t iwl_isr(int irq, void *data) -{ - struct iwl_trans *trans = data; - struct iwl_trans_pcie *trans_pcie; - u32 inta, inta_mask; - unsigned long flags; -#ifdef CONFIG_IWLWIFI_DEBUG - u32 inta_fh; -#endif - if (!trans) - return IRQ_NONE; - - trace_iwlwifi_dev_irq(trans->dev); - - trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - - spin_lock_irqsave(&trans_pcie->irq_lock, flags); - - /* Disable (but don't clear!) interrupts here to avoid - * back-to-back ISRs and sporadic interrupts from our NIC. - * If we have something to service, the tasklet will re-enable ints. - * If we *don't* have something, we'll re-enable before leaving here. */ - inta_mask = iwl_read32(trans, CSR_INT_MASK); /* just for debug */ - iwl_write32(trans, CSR_INT_MASK, 0x00000000); - - /* Discover which interrupts are active/pending */ - inta = iwl_read32(trans, CSR_INT); - - /* Ignore interrupt if there's nothing in NIC to service. - * This may be due to IRQ shared with another device, - * or due to sporadic interrupts thrown from our NIC. */ - if (!inta) { - IWL_DEBUG_ISR(trans, "Ignore interrupt, inta == 0\n"); - goto none; - } - - if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) { - /* Hardware disappeared. It might have already raised - * an interrupt */ - IWL_WARN(trans, "HARDWARE GONE?? INTA == 0x%08x\n", inta); - goto unplugged; - } - -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_have_debug_level(IWL_DL_ISR)) { - inta_fh = iwl_read32(trans, CSR_FH_INT_STATUS); - IWL_DEBUG_ISR(trans, "ISR inta 0x%08x, enabled 0x%08x, " - "fh 0x%08x\n", inta, inta_mask, inta_fh); - } -#endif - - trans_pcie->inta |= inta; - /* iwl_irq_tasklet() will service interrupts and re-enable them */ - if (likely(inta)) - tasklet_schedule(&trans_pcie->irq_tasklet); - else if (test_bit(STATUS_INT_ENABLED, &trans_pcie->status) && - !trans_pcie->inta) - iwl_enable_interrupts(trans); - - unplugged: - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); - return IRQ_HANDLED; - - none: - /* re-enable interrupts here since we don't have anything to service. */ - /* only Re-enable if disabled by irq and no schedules tasklet. */ - if (test_bit(STATUS_INT_ENABLED, &trans_pcie->status) && - !trans_pcie->inta) - iwl_enable_interrupts(trans); - - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); - return IRQ_NONE; -} - -/* interrupt handler using ict table, with this interrupt driver will - * stop using INTA register to get device's interrupt, reading this register - * is expensive, device will write interrupts in ICT dram table, increment - * index then will fire interrupt to driver, driver will OR all ICT table - * entries from current index up to table entry with 0 value. the result is - * the interrupt we need to service, driver will set the entries back to 0 and - * set index. - */ -irqreturn_t iwl_isr_ict(int irq, void *data) -{ - struct iwl_trans *trans = data; - struct iwl_trans_pcie *trans_pcie; - u32 inta, inta_mask; - u32 val = 0; - u32 read; - unsigned long flags; - - if (!trans) - return IRQ_NONE; - - trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - - /* dram interrupt table not set yet, - * use legacy interrupt. - */ - if (!trans_pcie->use_ict) - return iwl_isr(irq, data); - - trace_iwlwifi_dev_irq(trans->dev); - - spin_lock_irqsave(&trans_pcie->irq_lock, flags); - - /* Disable (but don't clear!) interrupts here to avoid - * back-to-back ISRs and sporadic interrupts from our NIC. - * If we have something to service, the tasklet will re-enable ints. - * If we *don't* have something, we'll re-enable before leaving here. - */ - inta_mask = iwl_read32(trans, CSR_INT_MASK); /* just for debug */ - iwl_write32(trans, CSR_INT_MASK, 0x00000000); - - - /* Ignore interrupt if there's nothing in NIC to service. - * This may be due to IRQ shared with another device, - * or due to sporadic interrupts thrown from our NIC. */ - read = le32_to_cpu(trans_pcie->ict_tbl[trans_pcie->ict_index]); - trace_iwlwifi_dev_ict_read(trans->dev, trans_pcie->ict_index, read); - if (!read) { - IWL_DEBUG_ISR(trans, "Ignore interrupt, inta == 0\n"); - goto none; - } - - /* - * Collect all entries up to the first 0, starting from ict_index; - * note we already read at ict_index. - */ - do { - val |= read; - IWL_DEBUG_ISR(trans, "ICT index %d value 0x%08X\n", - trans_pcie->ict_index, read); - trans_pcie->ict_tbl[trans_pcie->ict_index] = 0; - trans_pcie->ict_index = - iwl_queue_inc_wrap(trans_pcie->ict_index, ICT_COUNT); - - read = le32_to_cpu(trans_pcie->ict_tbl[trans_pcie->ict_index]); - trace_iwlwifi_dev_ict_read(trans->dev, trans_pcie->ict_index, - read); - } while (read); - - /* We should not get this value, just ignore it. */ - if (val == 0xffffffff) - val = 0; - - /* - * this is a w/a for a h/w bug. the h/w bug may cause the Rx bit - * (bit 15 before shifting it to 31) to clear when using interrupt - * coalescing. fortunately, bits 18 and 19 stay set when this happens - * so we use them to decide on the real state of the Rx bit. - * In order words, bit 15 is set if bit 18 or bit 19 are set. - */ - if (val & 0xC0000) - val |= 0x8000; - - inta = (0xff & val) | ((0xff00 & val) << 16); - IWL_DEBUG_ISR(trans, "ISR inta 0x%08x, enabled 0x%08x ict 0x%08x\n", - inta, inta_mask, val); - - inta &= trans_pcie->inta_mask; - trans_pcie->inta |= inta; - - /* iwl_irq_tasklet() will service interrupts and re-enable them */ - if (likely(inta)) - tasklet_schedule(&trans_pcie->irq_tasklet); - else if (test_bit(STATUS_INT_ENABLED, &trans_pcie->status) && - !trans_pcie->inta) { - /* Allow interrupt if was disabled by this handler and - * no tasklet was schedules, We should not enable interrupt, - * tasklet will enable it. - */ - iwl_enable_interrupts(trans); - } - - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); - return IRQ_HANDLED; - - none: - /* re-enable interrupts here since we don't have anything to service. - * only Re-enable if disabled by irq. - */ - if (test_bit(STATUS_INT_ENABLED, &trans_pcie->status) && - !trans_pcie->inta) - iwl_enable_interrupts(trans); - - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); - return IRQ_NONE; -} |