diff options
Diffstat (limited to 'drivers/net/dsa/mt7530.c')
-rw-r--r-- | drivers/net/dsa/mt7530.c | 51 |
1 files changed, 50 insertions, 1 deletions
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index de7692b763d8..6408402a44f5 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -558,7 +558,7 @@ mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface) val |= 0x190000 << RG_COREPLL_SDM_PCW_S; mt7530_write(priv, MT7531_PLLGP_CR0, val); break; - }; + } /* Set feedback divide ratio update signal to high */ val = mt7530_read(priv, MT7531_PLLGP_CR0); @@ -1021,6 +1021,53 @@ mt7530_port_disable(struct dsa_switch *ds, int port) mutex_unlock(&priv->reg_mutex); } +static int +mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) +{ + struct mt7530_priv *priv = ds->priv; + struct mii_bus *bus = priv->bus; + int length; + u32 val; + + /* When a new MTU is set, DSA always set the CPU port's MTU to the + * largest MTU of the slave ports. Because the switch only has a global + * RX length register, only allowing CPU port here is enough. + */ + if (!dsa_is_cpu_port(ds, port)) + return 0; + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + + val = mt7530_mii_read(priv, MT7530_GMACCR); + val &= ~MAX_RX_PKT_LEN_MASK; + + /* RX length also includes Ethernet header, MTK tag, and FCS length */ + length = new_mtu + ETH_HLEN + MTK_HDR_LEN + ETH_FCS_LEN; + if (length <= 1522) { + val |= MAX_RX_PKT_LEN_1522; + } else if (length <= 1536) { + val |= MAX_RX_PKT_LEN_1536; + } else if (length <= 1552) { + val |= MAX_RX_PKT_LEN_1552; + } else { + val &= ~MAX_RX_JUMBO_MASK; + val |= MAX_RX_JUMBO(DIV_ROUND_UP(length, 1024)); + val |= MAX_RX_PKT_LEN_JUMBO; + } + + mt7530_mii_write(priv, MT7530_GMACCR, val); + + mutex_unlock(&bus->mdio_lock); + + return 0; +} + +static int +mt7530_port_max_mtu(struct dsa_switch *ds, int port) +{ + return MT7530_MAX_MTU; +} + static void mt7530_stp_state_set(struct dsa_switch *ds, int port, u8 state) { @@ -2519,6 +2566,8 @@ static const struct dsa_switch_ops mt7530_switch_ops = { .get_sset_count = mt7530_get_sset_count, .port_enable = mt7530_port_enable, .port_disable = mt7530_port_disable, + .port_change_mtu = mt7530_port_change_mtu, + .port_max_mtu = mt7530_port_max_mtu, .port_stp_state_set = mt7530_stp_state_set, .port_bridge_join = mt7530_port_bridge_join, .port_bridge_leave = mt7530_port_bridge_leave, |