diff options
Diffstat (limited to 'drivers/mtd')
28 files changed, 162 insertions, 98 deletions
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index e4ec3659759a..ecf90f5c97c2 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -159,7 +159,7 @@ config MTD_AFS_PARTS config MTD_OF_PARTS tristate "Flash partition map based on OF description" - depends on PPC_OF && MTD_PARTITIONS + depends on (MICROBLAZE || PPC_OF) && MTD_PARTITIONS help This provides a partition parsing function which derives the partition map from the children of the flash node, diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig index 9408099eec48..35c6a23b183b 100644 --- a/drivers/mtd/chips/Kconfig +++ b/drivers/mtd/chips/Kconfig @@ -1,5 +1,3 @@ -# drivers/mtd/chips/Kconfig - menu "RAM/ROM/Flash chip drivers" depends on MTD!=n @@ -242,4 +240,3 @@ config MTD_XIP then say N. endmenu - diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index c222514bb70d..35081ce77fbd 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -1,5 +1,3 @@ -# drivers/mtd/maps/Kconfig - menu "Self-contained MTD device drivers" depends on MTD!=n @@ -308,4 +306,3 @@ config MTD_DOCPROBE_55AA you have managed to wipe the first block. endmenu - diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index ae1bfb2ce1e0..f3f4768d6e18 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -21,6 +21,7 @@ #include <linux/interrupt.h> #include <linux/mutex.h> #include <linux/math64.h> +#include <linux/sched.h> #include <linux/mod_devicetable.h> #include <linux/mtd/mtd.h> diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c index 3aa05cd18ea1..592016a0668f 100644 --- a/drivers/mtd/devices/slram.c +++ b/drivers/mtd/devices/slram.c @@ -18,7 +18,7 @@ to specify the offset instead of the absolute address NOTE: - With slram it's only possible to map a contigous memory region. Therfore + With slram it's only possible to map a contiguous memory region. Therefore if there's a device mapped somewhere in the region specified slram will fail to load (see kernel log if modprobe fails). diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c index c2baf3353f84..0a11721f146e 100644 --- a/drivers/mtd/devices/sst25l.c +++ b/drivers/mtd/devices/sst25l.c @@ -20,6 +20,7 @@ #include <linux/device.h> #include <linux/mutex.h> #include <linux/interrupt.h> +#include <linux/sched.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> diff --git a/drivers/mtd/lpddr/Kconfig b/drivers/mtd/lpddr/Kconfig index 5a401d8047ab..265f969817e3 100644 --- a/drivers/mtd/lpddr/Kconfig +++ b/drivers/mtd/lpddr/Kconfig @@ -1,5 +1,3 @@ -# drivers/mtd/chips/Kconfig - menu "LPDDR flash memory drivers" depends on MTD!=n @@ -20,4 +18,3 @@ config MTD_QINFO_PROBE families of devices. This serves similar purpose of CFI on legacy Flash products endmenu - diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index c7e97cf4c77e..4c364d44ad59 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -1,5 +1,3 @@ -# drivers/mtd/maps/Kconfig - menu "Mapping drivers for chip access" depends on MTD!=n @@ -74,7 +72,7 @@ config MTD_PHYSMAP_BANKWIDTH config MTD_PHYSMAP_OF tristate "Flash device in physical memory map based on OF description" - depends on PPC_OF && (MTD_CFI || MTD_JEDECPROBE || MTD_ROM) + depends on (MICROBLAZE || PPC_OF) && (MTD_CFI || MTD_JEDECPROBE || MTD_ROM) help This provides a 'mapping' driver which allows the NOR Flash and ROM driver code to communicate with chips which are mapped @@ -383,9 +381,9 @@ config MTD_IXP2000 depends on MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP2000 help This enables MTD access to flash devices on platforms based - on Intel's IXP2000 family of network processors such as the - IXDP425 and Coyote. If you have an IXP2000 based board and - would like to use the flash chips on it, say 'Y'. + on Intel's IXP2000 family of network processors. If you have an + IXP2000 based board and would like to use the flash chips on it, + say 'Y'. config MTD_FORTUNET tristate "CFI Flash device mapped on the FortuNet board" diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index 3078d6d0112f..ce315214ff2b 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -58,4 +58,6 @@ obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o +obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o +obj-$(CONFIG_MTD_VMU) += vmu-flash.o obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o diff --git a/drivers/mtd/maps/omap_nor.c b/drivers/mtd/maps/omap_nor.c index a24478102b11..ead0b2fab670 100644 --- a/drivers/mtd/maps/omap_nor.c +++ b/drivers/mtd/maps/omap_nor.c @@ -45,7 +45,7 @@ #include <asm/io.h> #include <mach/hardware.h> #include <asm/mach/flash.h> -#include <mach/tc.h> +#include <plat/tc.h> #ifdef CONFIG_MTD_PARTITIONS static const char *part_probes[] = { /* "RedBoot", */ "cmdlinepart", NULL }; diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c index 52c07f21be01..689d6a79ffc0 100644 --- a/drivers/mtd/maps/pcmciamtd.c +++ b/drivers/mtd/maps/pcmciamtd.c @@ -118,11 +118,9 @@ static caddr_t remap_window(struct map_info *map, unsigned long to) DEBUG(2, "Remapping window from 0x%8.8x to 0x%8.8x", dev->offset, mrq.CardOffset); mrq.Page = 0; - ret = pcmcia_map_mem_page(win, &mrq); - if (ret != 0) { - cs_error(dev->p_dev, MapMemPage, ret); + ret = pcmcia_map_mem_page(dev->p_dev, win, &mrq); + if (ret != 0) return NULL; - } dev->offset = mrq.CardOffset; } return dev->win_base + (to & (dev->win_size-1)); @@ -327,8 +325,6 @@ static void pcmciamtd_set_vpp(struct map_info *map, int on) DEBUG(2, "dev = %p on = %d vpp = %d\n", dev, on, dev->vpp); ret = pcmcia_modify_configuration(link, &mod); - if (ret != 0) - cs_error(link, ModifyConfiguration, ret); } @@ -348,7 +344,7 @@ static void pcmciamtd_release(struct pcmcia_device *link) iounmap(dev->win_base); dev->win_base = NULL; } - pcmcia_release_window(link->win); + pcmcia_release_window(link, link->win); } pcmcia_disable_device(link); } @@ -393,6 +389,7 @@ static int pcmciamtd_cistpl_device(struct pcmcia_device *p_dev, struct pcmciamtd_dev *dev = priv_data; cisparse_t parse; cistpl_device_t *t = &parse.device; + int i; if (pcmcia_parse_tuple(tuple, &parse)) return -EINVAL; @@ -416,6 +413,7 @@ static int pcmciamtd_cistpl_geo(struct pcmcia_device *p_dev, struct pcmciamtd_dev *dev = priv_data; cisparse_t parse; cistpl_device_geo_t *t = &parse.device_geo; + int i; if (pcmcia_parse_tuple(tuple, &parse)) return -EINVAL; @@ -488,16 +486,12 @@ static void card_settings(struct pcmciamtd_dev *dev, struct pcmcia_device *link, * MTD device available to the system. */ -#define CS_CHECK(fn, ret) \ -do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) - static int pcmciamtd_config(struct pcmcia_device *link) { struct pcmciamtd_dev *dev = link->priv; struct mtd_info *mtd = NULL; cs_status_t status; win_req_t req; - int last_ret = 0, last_fn = 0; int ret; int i; static char *probes[] = { "jedec_probe", "cfi_probe" }; @@ -536,7 +530,7 @@ static int pcmciamtd_config(struct pcmcia_device *link) int ret; DEBUG(2, "requesting window with size = %dKiB memspeed = %d", req.Size >> 10, req.AccessSpeed); - ret = pcmcia_request_window(&link, &req, &link->win); + ret = pcmcia_request_window(link, &req, &link->win); DEBUG(2, "ret = %d dev->win_size = %d", ret, dev->win_size); if(ret) { req.Size >>= 1; @@ -584,7 +578,6 @@ static int pcmciamtd_config(struct pcmcia_device *link) DEBUG(2, "Setting Configuration"); ret = pcmcia_request_configuration(link, &link->conf); if (ret != 0) { - cs_error(link, RequestConfiguration, ret); if (dev->win_base) { iounmap(dev->win_base); dev->win_base = NULL; @@ -659,8 +652,7 @@ static int pcmciamtd_config(struct pcmcia_device *link) link->dev_node = &dev->node; return 0; - cs_failed: - cs_error(link, last_fn, last_ret); + failed: err("CS Error, exiting"); pcmciamtd_release(link); return -ENODEV; diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c index fa83757e7c96..c82e09bbc5fd 100644 --- a/drivers/mtd/mtd_blkdevs.c +++ b/drivers/mtd/mtd_blkdevs.c @@ -32,14 +32,6 @@ struct mtd_blkcore_priv { spinlock_t queue_lock; }; -static int blktrans_discard_request(struct request_queue *q, - struct request *req) -{ - req->cmd_type = REQ_TYPE_LINUX_BLOCK; - req->cmd[0] = REQ_LB_OP_DISCARD; - return 0; -} - static int do_blktrans_request(struct mtd_blktrans_ops *tr, struct mtd_blktrans_dev *dev, struct request *req) @@ -52,10 +44,6 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr, buf = req->buffer; - if (req->cmd_type == REQ_TYPE_LINUX_BLOCK && - req->cmd[0] == REQ_LB_OP_DISCARD) - return tr->discard(dev, block, nsect); - if (!blk_fs_request(req)) return -EIO; @@ -63,17 +51,22 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr, get_capacity(req->rq_disk)) return -EIO; + if (blk_discard_rq(req)) + return tr->discard(dev, block, nsect); + switch(rq_data_dir(req)) { case READ: for (; nsect > 0; nsect--, block++, buf += tr->blksize) if (tr->readsect(dev, block, buf)) return -EIO; + rq_flush_dcache_pages(req); return 0; case WRITE: if (!tr->writesect) return -EIO; + rq_flush_dcache_pages(req); for (; nsect > 0; nsect--, block++, buf += tr->blksize) if (tr->writesect(dev, block, buf)) return -EIO; @@ -377,8 +370,8 @@ int register_mtd_blktrans(struct mtd_blktrans_ops *tr) tr->blkcore_priv->rq->queuedata = tr; blk_queue_logical_block_size(tr->blkcore_priv->rq, tr->blksize); if (tr->discard) - blk_queue_set_discard(tr->blkcore_priv->rq, - blktrans_discard_request); + queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, + tr->blkcore_priv->rq); tr->blkshift = ffs(tr->blksize) - 1; diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 34598e9c1a40..7678538344f4 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -1,5 +1,3 @@ -# drivers/mtd/nand/Kconfig - menuconfig MTD_NAND tristate "NAND Device Support" depends on MTD @@ -374,7 +372,7 @@ endchoice config MTD_NAND_PXA3xx tristate "Support for NAND flash devices on PXA3xx" - depends on MTD_NAND && PXA3xx + depends on MTD_NAND && (PXA3xx || ARCH_MMP) help This enables the driver for the NAND flash device found on PXA3xx processors diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c index 005b91f096f2..2548e1065bf8 100644 --- a/drivers/mtd/nand/ams-delta.c +++ b/drivers/mtd/nand/ams-delta.c @@ -25,7 +25,7 @@ #include <mach/hardware.h> #include <asm/sizes.h> #include <mach/gpio.h> -#include <mach/board-ams-delta.h> +#include <plat/board-ams-delta.h> /* * MTD structure for E3 (Delta) diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index e51c1ed7ac18..b126cf887476 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -1056,7 +1056,7 @@ static struct nand_ecclayout doc200x_oobinfo = { }; /* Find the (I)NFTL Media Header, and optionally also the mirror media header. - On sucessful return, buf will contain a copy of the media header for + On successful return, buf will contain a copy of the media header for further processing. id is the string to scan for, and will presumably be either "ANAND" or "BNAND". If findmirror=1, also look for the mirror media header. The page #s of the found media headers are placed in mh0_page and diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c index 809fb53304ae..271b8e735e8f 100644 --- a/drivers/mtd/nand/nand_ecc.c +++ b/drivers/mtd/nand/nand_ecc.c @@ -490,7 +490,7 @@ int __nand_correct_data(unsigned char *buf, * * The b2 shift is there to get rid of the lowest two bits. * We could also do addressbits[b2] >> 1 but for the - * performace it does not make any difference + * performance it does not make any difference */ if (eccsize_mult == 1) byte_addr = (addressbits[b1] << 4) + addressbits[b0]; diff --git a/drivers/mtd/nand/nomadik_nand.c b/drivers/mtd/nand/nomadik_nand.c index 7c302d55910e..66123419f65d 100644 --- a/drivers/mtd/nand/nomadik_nand.c +++ b/drivers/mtd/nand/nomadik_nand.c @@ -216,7 +216,7 @@ static int nomadik_nand_resume(struct device *dev) return 0; } -static struct dev_pm_ops nomadik_nand_pm_ops = { +static const struct dev_pm_ops nomadik_nand_pm_ops = { .suspend = nomadik_nand_suspend, .resume = nomadik_nand_resume, }; diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 090ab87086b5..1bb799f0125c 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -18,9 +18,9 @@ #include <linux/mtd/partitions.h> #include <linux/io.h> -#include <mach/dma.h> -#include <mach/gpmc.h> -#include <mach/nand.h> +#include <plat/dma.h> +#include <plat/gpmc.h> +#include <plat/nand.h> #define GPMC_IRQ_STATUS 0x18 #define GPMC_ECC_CONFIG 0x1F4 diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 75aa8713abd1..1a5a0365c983 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -9,6 +9,7 @@ * published by the Free Software Foundation. */ +#include <linux/kernel.h> #include <linux/module.h> #include <linux/interrupt.h> #include <linux/platform_device.h> @@ -22,7 +23,7 @@ #include <linux/irq.h> #include <mach/dma.h> -#include <mach/pxa3xx_nand.h> +#include <plat/pxa3xx_nand.h> #define CHIP_DELAY_TIMEOUT (2 * HZ/10) @@ -84,10 +85,6 @@ #define NDCB0_CMD1_MASK (0xff) #define NDCB0_ADDR_CYC_SHIFT (16) -/* dma-able I/O address for the NAND data and commands */ -#define NDCB0_DMA_ADDR (0x43100048) -#define NDDB_DMA_ADDR (0x43100040) - /* macros for registers read/write */ #define nand_writel(info, off, val) \ __raw_writel((val), (info)->mmio_base + (off)) @@ -123,6 +120,7 @@ struct pxa3xx_nand_info { struct clk *clk; void __iomem *mmio_base; + unsigned long mmio_phys; unsigned int buf_start; unsigned int buf_count; @@ -228,13 +226,35 @@ static struct pxa3xx_nand_flash samsung512MbX16 = { .chip_id = 0x46ec, }; +static struct pxa3xx_nand_flash samsung2GbX8 = { + .timing = &samsung512MbX16_timing, + .cmdset = &smallpage_cmdset, + .page_per_block = 64, + .page_size = 2048, + .flash_width = 8, + .dfc_width = 8, + .num_blocks = 2048, + .chip_id = 0xdaec, +}; + +static struct pxa3xx_nand_flash samsung32GbX8 = { + .timing = &samsung512MbX16_timing, + .cmdset = &smallpage_cmdset, + .page_per_block = 128, + .page_size = 4096, + .flash_width = 8, + .dfc_width = 8, + .num_blocks = 8192, + .chip_id = 0xd7ec, +}; + static struct pxa3xx_nand_timing micron_timing = { .tCH = 10, .tCS = 25, .tWH = 15, .tWP = 25, .tRH = 15, - .tRP = 25, + .tRP = 30, .tR = 25000, .tWHR = 60, .tAR = 10, @@ -262,6 +282,28 @@ static struct pxa3xx_nand_flash micron1GbX16 = { .chip_id = 0xb12c, }; +static struct pxa3xx_nand_flash micron4GbX8 = { + .timing = µn_timing, + .cmdset = &largepage_cmdset, + .page_per_block = 64, + .page_size = 2048, + .flash_width = 8, + .dfc_width = 8, + .num_blocks = 4096, + .chip_id = 0xdc2c, +}; + +static struct pxa3xx_nand_flash micron4GbX16 = { + .timing = µn_timing, + .cmdset = &largepage_cmdset, + .page_per_block = 64, + .page_size = 2048, + .flash_width = 16, + .dfc_width = 16, + .num_blocks = 4096, + .chip_id = 0xcc2c, +}; + static struct pxa3xx_nand_timing stm2GbX16_timing = { .tCH = 10, .tCS = 35, @@ -287,8 +329,12 @@ static struct pxa3xx_nand_flash stm2GbX16 = { static struct pxa3xx_nand_flash *builtin_flash_types[] = { &samsung512MbX16, + &samsung2GbX8, + &samsung32GbX8, µn1GbX8, µn1GbX16, + µn4GbX8, + µn4GbX16, &stm2GbX16, }; #endif /* CONFIG_MTD_NAND_PXA3xx_BUILTIN */ @@ -489,7 +535,7 @@ static int handle_data_pio(struct pxa3xx_nand_info *info) switch (info->state) { case STATE_PIO_WRITING: __raw_writesl(info->mmio_base + NDDB, info->data_buff, - info->data_size >> 2); + DIV_ROUND_UP(info->data_size, 4)); enable_int(info, NDSR_CS0_BBD | NDSR_CS0_CMDD); @@ -501,7 +547,7 @@ static int handle_data_pio(struct pxa3xx_nand_info *info) break; case STATE_PIO_READING: __raw_readsl(info->mmio_base + NDDB, info->data_buff, - info->data_size >> 2); + DIV_ROUND_UP(info->data_size, 4)); break; default: printk(KERN_ERR "%s: invalid state %d\n", __func__, @@ -523,11 +569,11 @@ static void start_data_dma(struct pxa3xx_nand_info *info, int dir_out) if (dir_out) { desc->dsadr = info->data_buff_phys; - desc->dtadr = NDDB_DMA_ADDR; + desc->dtadr = info->mmio_phys + NDDB; desc->dcmd |= DCMD_INCSRCADDR | DCMD_FLOWTRG; } else { desc->dtadr = info->data_buff_phys; - desc->dsadr = NDDB_DMA_ADDR; + desc->dsadr = info->mmio_phys + NDDB; desc->dcmd |= DCMD_INCTRGADDR | DCMD_FLOWSRC; } @@ -669,6 +715,7 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command, /* disable HW ECC to get all the OOB data */ info->buf_count = mtd->writesize + mtd->oobsize; info->buf_start = mtd->writesize + column; + memset(info->data_buff, 0xFF, info->buf_count); if (prepare_read_prog_cmd(info, cmdset->read1, column, page_addr)) break; @@ -1239,13 +1286,17 @@ static int pxa3xx_nand_probe(struct platform_device *pdev) ret = -ENODEV; goto fail_free_res; } + info->mmio_phys = r->start; ret = pxa3xx_nand_init_buff(info); if (ret) goto fail_free_io; - ret = request_irq(IRQ_NAND, pxa3xx_nand_irq, IRQF_DISABLED, - pdev->name, info); + /* initialize all interrupts to be disabled */ + disable_int(info, NDSR_MASK); + + ret = request_irq(irq, pxa3xx_nand_irq, IRQF_DISABLED, + pdev->name, info); if (ret < 0) { dev_err(&pdev->dev, "failed to request IRQ\n"); goto fail_free_buf; @@ -1271,7 +1322,7 @@ static int pxa3xx_nand_probe(struct platform_device *pdev) return add_mtd_partitions(mtd, pdata->parts, pdata->nr_parts); fail_free_irq: - free_irq(IRQ_NAND, info); + free_irq(irq, info); fail_free_buf: if (use_dma) { pxa_free_dma(info->data_dma_ch); @@ -1296,12 +1347,15 @@ static int pxa3xx_nand_remove(struct platform_device *pdev) struct mtd_info *mtd = platform_get_drvdata(pdev); struct pxa3xx_nand_info *info = mtd->priv; struct resource *r; + int irq; platform_set_drvdata(pdev, NULL); del_mtd_device(mtd); del_mtd_partitions(mtd); - free_irq(IRQ_NAND, info); + irq = platform_get_irq(pdev, 0); + if (irq >= 0) + free_irq(irq, info); if (use_dma) { pxa_free_dma(info->data_dma_ch); dma_free_writecombine(&pdev->dev, info->data_buff_size, diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 6e88bd3c02f5..fa6e9c7fe511 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -875,7 +875,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, * @info: The controller instance. * @nmtd: The driver version of the MTD instance. * - * This routine is called after the chip probe has succesfully completed + * This routine is called after the chip probe has successfully completed * and the relevant per-chip information updated. This call ensure that * we update the internal state accordingly. * diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig index a38f580c2bb3..3a9f15784600 100644 --- a/drivers/mtd/onenand/Kconfig +++ b/drivers/mtd/onenand/Kconfig @@ -1,7 +1,3 @@ -# -# linux/drivers/mtd/onenand/Kconfig -# - menuconfig MTD_ONENAND tristate "OneNAND Device Support" depends on MTD diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index 2dafd0949be5..75f38b95811e 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -36,13 +36,13 @@ #include <linux/io.h> #include <asm/mach/flash.h> -#include <mach/gpmc.h> -#include <mach/onenand.h> +#include <plat/gpmc.h> +#include <plat/onenand.h> #include <mach/gpio.h> -#include <mach/dma.h> +#include <plat/dma.h> -#include <mach/board.h> +#include <plat/board.h> #define DRIVER_NAME "omap2-onenand" diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig index b1cd7a1a2191..0a8c7ea764ae 100644 --- a/drivers/mtd/ubi/Kconfig +++ b/drivers/mtd/ubi/Kconfig @@ -1,5 +1,3 @@ -# drivers/mtd/ubi/Kconfig - menu "UBI - Unsorted block images" depends on MTD diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index e1f7d0a78b9d..14cec04c34f9 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -42,6 +42,7 @@ #include <linux/log2.h> #include <linux/kthread.h> #include <linux/reboot.h> +#include <linux/kernel.h> #include "ubi.h" /* Maximum length of the 'mtd=' parameter */ @@ -1257,7 +1258,7 @@ static int __init bytes_str_to_int(const char *str) unsigned long result; result = simple_strtoul(str, &endp, 0); - if (str == endp || result < 0) { + if (str == endp || result >= INT_MAX) { printk(KERN_ERR "UBI error: incorrect bytes count: \"%s\"\n", str); return -EINVAL; diff --git a/drivers/mtd/ubi/kapi.c b/drivers/mtd/ubi/kapi.c index 88a72e9c8beb..277786ebaa2c 100644 --- a/drivers/mtd/ubi/kapi.c +++ b/drivers/mtd/ubi/kapi.c @@ -22,6 +22,8 @@ #include <linux/module.h> #include <linux/err.h> +#include <linux/namei.h> +#include <linux/fs.h> #include <asm/div64.h> #include "ubi.h" @@ -280,6 +282,44 @@ struct ubi_volume_desc *ubi_open_volume_nm(int ubi_num, const char *name, EXPORT_SYMBOL_GPL(ubi_open_volume_nm); /** + * ubi_open_volume_path - open UBI volume by its character device node path. + * @pathname: volume character device node path + * @mode: open mode + * + * This function is similar to 'ubi_open_volume()', but opens a volume the path + * to its character device node. + */ +struct ubi_volume_desc *ubi_open_volume_path(const char *pathname, int mode) +{ + int error, ubi_num, vol_id; + struct ubi_volume_desc *ret; + struct inode *inode; + struct path path; + + dbg_gen("open volume %s, mode %d", pathname, mode); + + if (!pathname || !*pathname) + return ERR_PTR(-EINVAL); + + error = kern_path(pathname, LOOKUP_FOLLOW, &path); + if (error) + return ERR_PTR(error); + + inode = path.dentry->d_inode; + ubi_num = ubi_major2num(imajor(inode)); + vol_id = iminor(inode) - 1; + + if (vol_id >= 0 && ubi_num >= 0) + ret = ubi_open_volume(ubi_num, vol_id, mode); + else + ret = ERR_PTR(-ENODEV); + + path_put(&path); + return ret; +} +EXPORT_SYMBOL_GPL(ubi_open_volume_path); + +/** * ubi_close_volume - close UBI volume. * @desc: volume descriptor */ diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c index e7161adc419d..90af61a2c3e4 100644 --- a/drivers/mtd/ubi/scan.c +++ b/drivers/mtd/ubi/scan.c @@ -794,16 +794,15 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, * number. */ image_seq = be32_to_cpu(ech->image_seq); - if (!si->image_seq_set) { + if (!ubi->image_seq && image_seq) ubi->image_seq = image_seq; - si->image_seq_set = 1; - } else if (ubi->image_seq && ubi->image_seq != image_seq) { + if (ubi->image_seq && image_seq && + ubi->image_seq != image_seq) { ubi_err("bad image sequence number %d in PEB %d, " "expected %d", image_seq, pnum, ubi->image_seq); ubi_dbg_dump_ec_hdr(ech); return -EINVAL; } - } /* OK, we've done with the EC header, let's look at the VID header */ diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h index bab31695dace..ff179ad7ca55 100644 --- a/drivers/mtd/ubi/scan.h +++ b/drivers/mtd/ubi/scan.h @@ -103,7 +103,6 @@ struct ubi_scan_volume { * @ec_sum: a temporary variable used when calculating @mean_ec * @ec_count: a temporary variable used when calculating @mean_ec * @corr_count: count of corrupted PEBs - * @image_seq_set: indicates @ubi->image_seq is known * * This data structure contains the result of scanning and may be used by other * UBI sub-systems to build final UBI data structures, further error-recovery @@ -127,7 +126,6 @@ struct ubi_scan_info { uint64_t ec_sum; int ec_count; int corr_count; - int image_seq_set; }; struct ubi_device; diff --git a/drivers/mtd/ubi/upd.c b/drivers/mtd/ubi/upd.c index 74fdc40c8627..c1d7b880c795 100644 --- a/drivers/mtd/ubi/upd.c +++ b/drivers/mtd/ubi/upd.c @@ -147,12 +147,14 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol, } if (bytes == 0) { + err = ubi_wl_flush(ubi); + if (err) + return err; + err = clear_update_marker(ubi, vol, 0); if (err) return err; - err = ubi_wl_flush(ubi); - if (!err) - vol-& |