diff options
Diffstat (limited to 'drivers/misc')
-rw-r--r-- | drivers/misc/Kconfig | 17 | ||||
-rw-r--r-- | drivers/misc/Makefile | 1 | ||||
-rw-r--r-- | drivers/misc/ioc4.c | 498 | ||||
-rw-r--r-- | drivers/misc/sgi-xp/Makefile | 13 | ||||
-rw-r--r-- | drivers/misc/sgi-xp/xp.h | 19 | ||||
-rw-r--r-- | drivers/misc/sgi-xp/xp_main.c | 8 | ||||
-rw-r--r-- | drivers/misc/sgi-xp/xp_nofault.S | 35 | ||||
-rw-r--r-- | drivers/misc/sgi-xp/xp_sn2.c | 190 | ||||
-rw-r--r-- | drivers/misc/sgi-xp/xp_uv.c | 9 | ||||
-rw-r--r-- | drivers/misc/sgi-xp/xpc.h | 273 | ||||
-rw-r--r-- | drivers/misc/sgi-xp/xpc_main.c | 31 | ||||
-rw-r--r-- | drivers/misc/sgi-xp/xpc_partition.c | 5 | ||||
-rw-r--r-- | drivers/misc/sgi-xp/xpc_sn2.c | 2459 | ||||
-rw-r--r-- | drivers/misc/sgi-xp/xpc_uv.c | 16 | ||||
-rw-r--r-- | drivers/misc/sgi-xp/xpnet.c | 2 |
15 files changed, 25 insertions, 3551 deletions
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 16900357afc2..45b61b8d8442 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -126,18 +126,6 @@ config INTEL_MID_PTI an Intel Atom (non-netbook) mobile device containing a MIPI P1149.7 standard implementation. -config SGI_IOC4 - tristate "SGI IOC4 Base IO support" - depends on PCI - ---help--- - This option enables basic support for the IOC4 chip on certain - SGI IO controller cards (IO9, IO10, and PCI-RT). This option - does not enable any specific functions on such a card, but provides - necessary infrastructure for other drivers to utilize. - - If you have an SGI Altix with an IOC4-based card say Y. - Otherwise say N. - config TIFM_CORE tristate "TI Flash Media interface support" depends on PCI @@ -200,9 +188,8 @@ config ENCLOSURE_SERVICES config SGI_XP tristate "Support communication between SGI SSIs" depends on NET - depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP - select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 - select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 + depends on (IA64_SGI_UV || X86_UV) && SMP + depends on X86_64 || BROKEN select SGI_GRU if X86_64 && SMP ---help--- An SGI machine can be divided into multiple Single System diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index abd8ae249746..8dae0a976200 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -21,7 +21,6 @@ obj-$(CONFIG_QCOM_COINCELL) += qcom-coincell.o obj-$(CONFIG_QCOM_FASTRPC) += fastrpc.o obj-$(CONFIG_SENSORS_BH1770) += bh1770glc.o obj-$(CONFIG_SENSORS_APDS990X) += apds990x.o -obj-$(CONFIG_SGI_IOC4) += ioc4.o obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o obj-$(CONFIG_KGDB_TESTS) += kgdbts.o obj-$(CONFIG_SGI_XP) += sgi-xp/ diff --git a/drivers/misc/ioc4.c b/drivers/misc/ioc4.c deleted file mode 100644 index 9d0445a567db..000000000000 --- a/drivers/misc/ioc4.c +++ /dev/null @@ -1,498 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005-2006 Silicon Graphics, Inc. All Rights Reserved. - */ - -/* This file contains the master driver module for use by SGI IOC4 subdrivers. - * - * It allocates any resources shared between multiple subdevices, and - * provides accessor functions (where needed) and the like for those - * resources. It also provides a mechanism for the subdevice modules - * to support loading and unloading. - * - * Non-shared resources (e.g. external interrupt A_INT_OUT register page - * alias, serial port and UART registers) are handled by the subdevice - * modules themselves. - * - * This is all necessary because IOC4 is not implemented as a multi-function - * PCI device, but an amalgamation of disparate registers for several - * types of device (ATA, serial, external interrupts). The normal - * resource management in the kernel doesn't have quite the right interfaces - * to handle this situation (e.g. multiple modules can't claim the same - * PCI ID), thus this IOC4 master module. - */ - -#include <linux/errno.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/ioc4.h> -#include <linux/ktime.h> -#include <linux/slab.h> -#include <linux/mutex.h> -#include <linux/time.h> -#include <asm/io.h> - -/*************** - * Definitions * - ***************/ - -/* Tweakable values */ - -/* PCI bus speed detection/calibration */ -#define IOC4_CALIBRATE_COUNT 63 /* Calibration cycle period */ -#define IOC4_CALIBRATE_CYCLES 256 /* Average over this many cycles */ -#define IOC4_CALIBRATE_DISCARD 2 /* Discard first few cycles */ -#define IOC4_CALIBRATE_LOW_MHZ 25 /* Lower bound on bus speed sanity */ -#define IOC4_CALIBRATE_HIGH_MHZ 75 /* Upper bound on bus speed sanity */ -#define IOC4_CALIBRATE_DEFAULT_MHZ 66 /* Assumed if sanity check fails */ - -/************************ - * Submodule management * - ************************/ - -static DEFINE_MUTEX(ioc4_mutex); - -static LIST_HEAD(ioc4_devices); -static LIST_HEAD(ioc4_submodules); - -/* Register an IOC4 submodule */ -int -ioc4_register_submodule(struct ioc4_submodule *is) -{ - struct ioc4_driver_data *idd; - - mutex_lock(&ioc4_mutex); - list_add(&is->is_list, &ioc4_submodules); - - /* Initialize submodule for each IOC4 */ - if (!is->is_probe) - goto out; - - list_for_each_entry(idd, &ioc4_devices, idd_list) { - if (is->is_probe(idd)) { - printk(KERN_WARNING - "%s: IOC4 submodule %s probe failed " - "for pci_dev %s", - __func__, module_name(is->is_owner), - pci_name(idd->idd_pdev)); - } - } - out: - mutex_unlock(&ioc4_mutex); - return 0; -} - -/* Unregister an IOC4 submodule */ -void -ioc4_unregister_submodule(struct ioc4_submodule *is) -{ - struct ioc4_driver_data *idd; - - mutex_lock(&ioc4_mutex); - list_del(&is->is_list); - - /* Remove submodule for each IOC4 */ - if (!is->is_remove) - goto out; - - list_for_each_entry(idd, &ioc4_devices, idd_list) { - if (is->is_remove(idd)) { - printk(KERN_WARNING - "%s: IOC4 submodule %s remove failed " - "for pci_dev %s.\n", - __func__, module_name(is->is_owner), - pci_name(idd->idd_pdev)); - } - } - out: - mutex_unlock(&ioc4_mutex); -} - -/********************* - * Device management * - *********************/ - -#define IOC4_CALIBRATE_LOW_LIMIT \ - (1000*IOC4_EXTINT_COUNT_DIVISOR/IOC4_CALIBRATE_LOW_MHZ) -#define IOC4_CALIBRATE_HIGH_LIMIT \ - (1000*IOC4_EXTINT_COUNT_DIVISOR/IOC4_CALIBRATE_HIGH_MHZ) -#define IOC4_CALIBRATE_DEFAULT \ - (1000*IOC4_EXTINT_COUNT_DIVISOR/IOC4_CALIBRATE_DEFAULT_MHZ) - -#define IOC4_CALIBRATE_END \ - (IOC4_CALIBRATE_CYCLES + IOC4_CALIBRATE_DISCARD) - -#define IOC4_INT_OUT_MODE_TOGGLE 0x7 /* Toggle INT_OUT every COUNT+1 ticks */ - -/* Determines external interrupt output clock period of the PCI bus an - * IOC4 is attached to. This value can be used to determine the PCI - * bus speed. - * - * IOC4 has a design feature that various internal timers are derived from - * the PCI bus clock. This causes IOC4 device drivers to need to take the - * bus speed into account when setting various register values (e.g. INT_OUT - * register COUNT field, UART divisors, etc). Since this information is - * needed by several subdrivers, it is determined by the main IOC4 driver, - * even though the following code utilizes external interrupt registers - * to perform the speed calculation. - */ -static void -ioc4_clock_calibrate(struct ioc4_driver_data *idd) -{ - union ioc4_int_out int_out; - union ioc4_gpcr gpcr; - unsigned int state, last_state; - uint64_t start, end, period; - unsigned int count; - - /* Enable output */ - gpcr.raw = 0; - gpcr.fields.dir = IOC4_GPCR_DIR_0; - gpcr.fields.int_out_en = 1; - writel(gpcr.raw, &idd->idd_misc_regs->gpcr_s.raw); - - /* Reset to power-on state */ - writel(0, &idd->idd_misc_regs->int_out.raw); - - /* Set up square wave */ - int_out.raw = 0; - int_out.fields.count = IOC4_CALIBRATE_COUNT; - int_out.fields.mode = IOC4_INT_OUT_MODE_TOGGLE; - int_out.fields.diag = 0; - writel(int_out.raw, &idd->idd_misc_regs->int_out.raw); - - /* Check square wave period averaged over some number of cycles */ - start = ktime_get_ns(); - state = 1; /* make sure the first read isn't a rising edge */ - for (count = 0; count <= IOC4_CALIBRATE_END; count++) { - do { /* wait for a rising edge */ - last_state = state; - int_out.raw = readl(&idd->idd_misc_regs->int_out.raw); - state = int_out.fields.int_out; - } while (last_state || !state); - - /* discard the first few cycles */ - if (count == IOC4_CALIBRATE_DISCARD) - start = ktime_get_ns(); - } - end = ktime_get_ns(); - - /* Calculation rearranged to preserve intermediate precision. - * Logically: - * 1. "end - start" gives us the measurement period over all - * the square wave cycles. - * 2. Divide by number of square wave cycles to get the period - * of a square wave cycle. - * 3. Divide by 2*(int_out.fields.count+1), which is the formula - * by which the IOC4 generates the square wave, to get the - * period of an IOC4 INT_OUT count. - */ - period = (end - start) / - (IOC4_CALIBRATE_CYCLES * 2 * (IOC4_CALIBRATE_COUNT + 1)); - - /* Bounds check the result. */ - if (period > IOC4_CALIBRATE_LOW_LIMIT || - period < IOC4_CALIBRATE_HIGH_LIMIT) { - printk(KERN_INFO - "IOC4 %s: Clock calibration failed. Assuming" - "PCI clock is %d ns.\n", - pci_name(idd->idd_pdev), - IOC4_CALIBRATE_DEFAULT / IOC4_EXTINT_COUNT_DIVISOR); - period = IOC4_CALIBRATE_DEFAULT; - } else { - u64 ns = period; - - do_div(ns, IOC4_EXTINT_COUNT_DIVISOR); - printk(KERN_DEBUG - "IOC4 %s: PCI clock is %llu ns.\n", - pci_name(idd->idd_pdev), (unsigned long long)ns); - } - - /* Remember results. We store the extint clock period rather - * than the PCI clock period so that greater precision is - * retained. Divide by IOC4_EXTINT_COUNT_DIVISOR to get - * PCI clock period. - */ - idd->count_period = period; -} - -/* There are three variants of IOC4 cards: IO9, IO10, and PCI-RT. - * Each brings out different combinations of IOC4 signals, thus. - * the IOC4 subdrivers need to know to which we're attached. - * - * We look for the presence of a SCSI (IO9) or SATA (IO10) controller - * on the same PCI bus at slot number 3 to differentiate IO9 from IO10. - * If neither is present, it's a PCI-RT. - */ -static unsigned int -ioc4_variant(struct ioc4_driver_data *idd) -{ - struct pci_dev *pdev = NULL; - int found = 0; - - /* IO9: Look for a QLogic ISP 12160 at the same bus and slot 3. */ - do { - pdev = pci_get_device(PCI_VENDOR_ID_QLOGIC, - PCI_DEVICE_ID_QLOGIC_ISP12160, pdev); - if (pdev && - idd->idd_pdev->bus->number == pdev->bus->number && - 3 == PCI_SLOT(pdev->devfn)) - found = 1; - } while (pdev && !found); - if (NULL != pdev) { - pci_dev_put(pdev); - return IOC4_VARIANT_IO9; - } - - /* IO10: Look for a Vitesse VSC 7174 at the same bus and slot 3. */ - pdev = NULL; - do { - pdev = pci_get_device(PCI_VENDOR_ID_VITESSE, - PCI_DEVICE_ID_VITESSE_VSC7174, pdev); - if (pdev && - idd->idd_pdev->bus->number == pdev->bus->number && - 3 == PCI_SLOT(pdev->devfn)) - found = 1; - } while (pdev && !found); - if (NULL != pdev) { - pci_dev_put(pdev); - return IOC4_VARIANT_IO10; - } - - /* PCI-RT: No SCSI/SATA controller will be present */ - return IOC4_VARIANT_PCI_RT; -} - -static void -ioc4_load_modules(struct work_struct *work) -{ - request_module("sgiioc4"); -} - -static DECLARE_WORK(ioc4_load_modules_work, ioc4_load_modules); - -/* Adds a new instance of an IOC4 card */ -static int -ioc4_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) -{ - struct ioc4_driver_data *idd; - struct ioc4_submodule *is; - uint32_t pcmd; - int ret; - - /* Enable IOC4 and take ownership of it */ - if ((ret = pci_enable_device(pdev))) { - printk(KERN_WARNING - "%s: Failed to enable IOC4 device for pci_dev %s.\n", - __func__, pci_name(pdev)); - goto out; - } - pci_set_master(pdev); - - /* Set up per-IOC4 data */ - idd = kmalloc(sizeof(struct ioc4_driver_data), GFP_KERNEL); - if (!idd) { - printk(KERN_WARNING - "%s: Failed to allocate IOC4 data for pci_dev %s.\n", - __func__, pci_name(pdev)); - ret = -ENODEV; - goto out_idd; - } - idd->idd_pdev = pdev; - idd->idd_pci_id = pci_id; - - /* Map IOC4 misc registers. These are shared between subdevices - * so the main IOC4 module manages them. - */ - idd->idd_bar0 = pci_resource_start(idd->idd_pdev, 0); - if (!idd->idd_bar0) { - printk(KERN_WARNING - "%s: Unable to find IOC4 misc resource " - "for pci_dev %s.\n", - __func__, pci_name(idd->idd_pdev)); - ret = -ENODEV; - goto out_pci; - } - if (!request_mem_region(idd->idd_bar0, sizeof(struct ioc4_misc_regs), - "ioc4_misc")) { - printk(KERN_WARNING - "%s: Unable to request IOC4 misc region " - "for pci_dev %s.\n", - __func__, pci_name(idd->idd_pdev)); - ret = -ENODEV; - goto out_pci; - } - idd->idd_misc_regs = ioremap(idd->idd_bar0, - sizeof(struct ioc4_misc_regs)); - if (!idd->idd_misc_regs) { - printk(KERN_WARNING - "%s: Unable to remap IOC4 misc region " - "for pci_dev %s.\n", - __func__, pci_name(idd->idd_pdev)); - ret = -ENODEV; - goto out_misc_region; - } - - /* Failsafe portion of per-IOC4 initialization */ - - /* Detect card variant */ - idd->idd_variant = ioc4_variant(idd); - printk(KERN_INFO "IOC4 %s: %s card detected.\n", pci_name(pdev), - idd->idd_variant == IOC4_VARIANT_IO9 ? "IO9" : - idd->idd_variant == IOC4_VARIANT_PCI_RT ? "PCI-RT" : - idd->idd_variant == IOC4_VARIANT_IO10 ? "IO10" : "unknown"); - - /* Initialize IOC4 */ - pci_read_config_dword(idd->idd_pdev, PCI_COMMAND, &pcmd); - pci_write_config_dword(idd->idd_pdev, PCI_COMMAND, - pcmd | PCI_COMMAND_PARITY | PCI_COMMAND_SERR); - - /* Determine PCI clock */ - ioc4_clock_calibrate(idd); - - /* Disable/clear all interrupts. Need to do this here lest - * one submodule request the shared IOC4 IRQ, but interrupt - * is generated by a different subdevice. - */ - /* Disable */ - writel(~0, &idd->idd_misc_regs->other_iec.raw); - writel(~0, &idd->idd_misc_regs->sio_iec); - /* Clear (i.e. acknowledge) */ - writel(~0, &idd->idd_misc_regs->other_ir.raw); - writel(~0, &idd->idd_misc_regs->sio_ir); - - /* Track PCI-device specific data */ - idd->idd_serial_data = NULL; - pci_set_drvdata(idd->idd_pdev, idd); - - mutex_lock(&ioc4_mutex); - list_add_tail(&idd->idd_list, &ioc4_devices); - - /* Add this IOC4 to all submodules */ - list_for_each_entry(is, &ioc4_submodules, is_list) { - if (is->is_probe && is->is_probe(idd)) { - printk(KERN_WARNING - "%s: IOC4 submodule 0x%s probe failed " - "for pci_dev %s.\n", - __func__, module_name(is->is_owner), - pci_name(idd->idd_pdev)); - } - } - mutex_unlock(&ioc4_mutex); - - /* Request sgiioc4 IDE driver on boards that bring that functionality - * off of IOC4. The root filesystem may be hosted on a drive connected - * to IOC4, so we need to make sure the sgiioc4 driver is loaded as it - * won't be picked up by modprobes due to the ioc4 module owning the - * PCI device. - */ - if (idd->idd_variant != IOC4_VARIANT_PCI_RT) { - /* Request the module from a work procedure as the modprobe - * goes out to a userland helper and that will hang if done - * directly from ioc4_probe(). - */ - printk(KERN_INFO "IOC4 loading sgiioc4 submodule\n"); - schedule_work(&ioc4_load_modules_work); - } - - return 0; - -out_misc_region: - release_mem_region(idd->idd_bar0, sizeof(struct ioc4_misc_regs)); -out_pci: - kfree(idd); -out_idd: - pci_disable_device(pdev); -out: - return ret; -} - -/* Removes a particular instance of an IOC4 card. */ -static void -ioc4_remove(struct pci_dev *pdev) -{ - struct ioc4_submodule *is; - struct ioc4_driver_data *idd; - - idd = pci_get_drvdata(pdev); - - /* Remove this IOC4 from all submodules */ - mutex_lock(&ioc4_mutex); - list_for_each_entry(is, &ioc4_submodules, is_list) { - if (is->is_remove && is->is_remove(idd)) { - printk(KERN_WARNING - "%s: IOC4 submodule 0x%s remove failed " - "for pci_dev %s.\n", - __func__, module_name(is->is_owner), - pci_name(idd->idd_pdev)); - } - } - mutex_unlock(&ioc4_mutex); - - /* Release resources */ - iounmap(idd->idd_misc_regs); - if (!idd->idd_bar0) { - printk(KERN_WARNING - "%s: Unable to get IOC4 misc mapping for pci_dev %s. " - "Device removal may be incomplete.\n", - __func__, pci_name(idd->idd_pdev)); - } - release_mem_region(idd->idd_bar0, sizeof(struct ioc4_misc_regs)); - - /* Disable IOC4 and relinquish */ - pci_disable_device(pdev); - - /* Remove and free driver data */ - mutex_lock(&ioc4_mutex); - list_del(&idd->idd_list); - mutex_unlock(&ioc4_mutex); - kfree(idd); -} - -static const struct pci_device_id ioc4_id_table[] = { - {PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC4, PCI_ANY_ID, - PCI_ANY_ID, 0x0b4000, 0xFFFFFF}, - {0} -}; - -static struct pci_driver ioc4_driver = { - .name = "IOC4", - .id_table = ioc4_id_table, - .probe = ioc4_probe, - .remove = ioc4_remove, -}; - -MODULE_DEVICE_TABLE(pci, ioc4_id_table); - -/********************* - * Module management * - *********************/ - -/* Module load */ -static int __init -ioc4_init(void) -{ - return pci_register_driver(&ioc4_driver); -} - -/* Module unload */ -static void __exit -ioc4_exit(void) -{ - /* Ensure ioc4_load_modules() has completed before exiting */ - flush_work(&ioc4_load_modules_work); - pci_unregister_driver(&ioc4_driver); -} - -module_init(ioc4_init); -module_exit(ioc4_exit); - -MODULE_AUTHOR("Brent Casavant - Silicon Graphics, Inc. <bcasavan@sgi.com>"); -MODULE_DESCRIPTION("PCI driver master module for SGI IOC4 Base-IO Card"); -MODULE_LICENSE("GPL"); - -EXPORT_SYMBOL(ioc4_register_submodule); -EXPORT_SYMBOL(ioc4_unregister_submodule); diff --git a/drivers/misc/sgi-xp/Makefile b/drivers/misc/sgi-xp/Makefile index bbb622c19c06..34c55a4045af 100644 --- a/drivers/misc/sgi-xp/Makefile +++ b/drivers/misc/sgi-xp/Makefile @@ -4,17 +4,10 @@ # obj-$(CONFIG_SGI_XP) += xp.o -xp-y := xp_main.o -xp-$(CONFIG_IA64_SGI_SN2) += xp_sn2.o xp_nofault.o -xp-$(CONFIG_IA64_GENERIC) += xp_sn2.o xp_nofault.o -xp-$(CONFIG_IA64_SGI_UV) += xp_uv.o -xp-$(CONFIG_X86_64) += xp_uv.o +xp-y := xp_main.o xp_uv.o obj-$(CONFIG_SGI_XP) += xpc.o -xpc-y := xpc_main.o xpc_channel.o xpc_partition.o -xpc-$(CONFIG_IA64_SGI_SN2) += xpc_sn2.o -xpc-$(CONFIG_IA64_GENERIC) += xpc_sn2.o -xpc-$(CONFIG_IA64_SGI_UV) += xpc_uv.o -xpc-$(CONFIG_X86_64) += xpc_uv.o +xpc-y := xpc_main.o xpc_channel.o xpc_partition.o \ + xpc_uv.o obj-$(CONFIG_SGI_XP) += xpnet.o diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h index b8069eec18cb..06469b12aced 100644 --- a/drivers/misc/sgi-xp/xp.h +++ b/drivers/misc/sgi-xp/xp.h @@ -24,23 +24,6 @@ #define is_uv() 0 #endif -#if defined CONFIG_IA64 -#include <asm/sn/arch.h> /* defines is_shub1() and is_shub2() */ -#define is_shub() ia64_platform_is("sn2") -#endif - -#ifndef is_shub1 -#define is_shub1() 0 -#endif - -#ifndef is_shub2 -#define is_shub2() 0 -#endif - -#ifndef is_shub -#define is_shub() 0 -#endif - #ifdef USE_DBUG_ON #define DBUG_ON(condition) BUG_ON(condition) #else @@ -360,9 +343,7 @@ extern int xp_nofault_PIOR(void *); extern int xp_error_PIOR(void); extern struct device *xp; -extern enum xp_retval xp_init_sn2(void); extern enum xp_retval xp_init_uv(void); -extern void xp_exit_sn2(void); extern void xp_exit_uv(void); #endif /* _DRIVERS_MISC_SGIXP_XP_H */ diff --git a/drivers/misc/sgi-xp/xp_main.c b/drivers/misc/sgi-xp/xp_main.c index 6d7f557fd1c1..5fd94d836070 100644 --- a/drivers/misc/sgi-xp/xp_main.c +++ b/drivers/misc/sgi-xp/xp_main.c @@ -233,9 +233,7 @@ xp_init(void) for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++) mutex_init(&xpc_registrations[ch_number].mutex); - if (is_shub()) - ret = xp_init_sn2(); - else if (is_uv()) + if (is_uv()) ret = xp_init_uv(); else ret = 0; @@ -251,9 +249,7 @@ module_init(xp_init); void __exit xp_exit(void) { - if (is_shub()) - xp_exit_sn2(); - else if (is_uv()) + if (is_uv()) xp_exit_uv(); } diff --git a/drivers/misc/sgi-xp/xp_nofault.S b/drivers/misc/sgi-xp/xp_nofault.S deleted file mode 100644 index e38d43319429..000000000000 --- a/drivers/misc/sgi-xp/xp_nofault.S +++ /dev/null @@ -1,35 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2004-2008 Silicon Graphics, Inc. All Rights Reserved. - */ - -/* - * The xp_nofault_PIOR function takes a pointer to a remote PIO register - * and attempts to load and consume a value from it. This function - * will be registered as a nofault code block. In the event that the - * PIO read fails, the MCA handler will force the error to look - * corrected and vector to the xp_error_PIOR which will return an error. - * - * The definition of "consumption" and the time it takes for an MCA - * to surface is processor implementation specific. This code - * is sufficient on Itanium through the Montvale processor family. - * It may need to be adjusted for future processor implementations. - * - * extern int xp_nofault_PIOR(void *remote_register); - */ - - .global xp_nofault_PIOR -xp_nofault_PIOR: - mov r8=r0 // Stage a success return value - ld8.acq r9=[r32];; // PIO Read the specified register - adds r9=1,r9;; // Add to force consumption - srlz.i;; // Allow time for MCA to surface - br.ret.sptk.many b0;; // Return success - - .global xp_error_PIOR -xp_error_PIOR: - mov r8=1 // Return value of 1 - br.ret.sptk.many b0;; // Return failure diff --git a/drivers/misc/sgi-xp/xp_sn2.c b/drivers/misc/sgi-xp/xp_sn2.c deleted file mode 100644 index d8e463f87241..000000000000 --- a/drivers/misc/sgi-xp/xp_sn2.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. - */ - -/* - * Cross Partition (XP) sn2-based functions. - * - * Architecture specific implementation of common functions. - */ - -#include <linux/module.h> -#include <linux/device.h> -#include <asm/sn/bte.h> -#include <asm/sn/sn_sal.h> -#include "xp.h" - -/* - * The export of xp_nofault_PIOR needs to happen here since it is defined - * in drivers/misc/sgi-xp/xp_nofault.S. The target of the nofault read is - * defined here. - */ -EXPORT_SYMBOL_GPL(xp_nofault_PIOR); - -u64 xp_nofault_PIOR_target; -EXPORT_SYMBOL_GPL(xp_nofault_PIOR_target); - -/* - * Register a nofault code region which performs a cross-partition PIO read. - * If the PIO read times out, the MCA handler will consume the error and - * return to a kernel-provided instruction to indicate an error. This PIO read - * exists because it is guaranteed to timeout if the destination is down - * (amo operations do not timeout on at least some CPUs on Shubs <= v1.2, - * which unfortunately we have to work around). - */ -static enum xp_retval -xp_register_nofault_code_sn2(void) -{ - int ret; - u64 func_addr; - u64 err_func_addr; - - func_addr = *(u64 *)xp_nofault_PIOR; - err_func_addr = *(u64 *)xp_error_PIOR; - ret = sn_register_nofault_code(func_addr, err_func_addr, err_func_addr, - 1, 1); - if (ret != 0) { - dev_err(xp, "can't register nofault code, error=%d\n", ret); - return xpSalError; - } - /* - * Setup the nofault PIO read target. (There is no special reason why - * SH_IPI_ACCESS was selected.) - */ - if (is_shub1()) - xp_nofault_PIOR_target = SH1_IPI_ACCESS; - else if (is_shub2()) - xp_nofault_PIOR_target = SH2_IPI_ACCESS0; - - return xpSuccess; -} - -static void -xp_unregister_nofault_code_sn2(void) -{ - u64 func_addr = *(u64 *)xp_nofault_PIOR; - u64 err_func_addr = *(u64 *)xp_error_PIOR; - - /* unregister the PIO read nofault code region */ - (void)sn_register_nofault_code(func_addr, err_func_addr, - err_func_addr, 1, 0); -} - -/* - * Convert a virtual memory address to a physical memory address. - */ -static unsigned long -xp_pa_sn2(void *addr) -{ - return __pa(addr); -} - -/* - * Convert a global physical to a socket physical address. - */ -static unsigned long -xp_socket_pa_sn2(unsigned long gpa) -{ - return gpa; -} - -/* - * Wrapper for bte_copy(). - * - * dst_pa - physical address of the destination of the transfer. - * src_pa - physical address of the source of the transfer. - * len - number of bytes to transfer from source to destination. - * - * Note: xp_remote_memcpy_sn2() should never be called while holding a spinlock. - */ -static enum xp_retval -xp_remote_memcpy_sn2(unsigned long dst_pa, const unsigned long src_pa, - size_t len) -{ - bte_result_t ret; - - ret = bte_copy(src_pa, dst_pa, len, (BTE_NOTIFY | BTE_WACQUIRE), NULL); - if (ret == BTE_SUCCESS) - return xpSuccess; - - if (is_shub2()) { - dev_err(xp, "bte_copy() on shub2 failed, error=0x%x dst_pa=" - "0x%016lx src_pa=0x%016lx len=%ld\\n", ret, dst_pa, - src_pa, len); - } else { - dev_err(xp, "bte_copy() failed, error=%d dst_pa=0x%016lx " - "src_pa=0x%016lx len=%ld\\n", ret, dst_pa, src_pa, len); - } - - return xpBteCopyError; -} - -static int -xp_cpu_to_nasid_sn2(int cpuid) -{ - return cpuid_to_nasid(cpuid); -} - -static enum xp_retval -xp_expand_memprotect_sn2(unsigned long phys_addr, unsigned long size) -{ - u64 nasid_array = 0; - int ret; - - ret = sn_change_memprotect(phys_addr, size, SN_MEMPROT_ACCESS_CLASS_1, - &nasid_array); - if (ret != 0) { - dev_err(xp, "sn_change_memprotect(,, " - "SN_MEMPROT_ACCESS_CLASS_1,) failed ret=%d\n", ret); - return xpSalError; - } - return xpSuccess; -} - -static enum xp_retval -xp_restrict_memprotect_sn2(unsigned long phys_addr, unsigned long size) -{ - u64 nasid_array = 0; - int ret; - - ret = sn_change_memprotect(phys_addr, size, SN_MEMPROT_ACCESS_CLASS_0, - &nasid_array); - if (ret != 0) { - dev_err(xp, "sn_change_memprotect(,, " - "SN_MEMPROT_ACCESS_CLASS_0,) failed ret=%d\n", ret); - return xpSalError; - } - return xpSuccess; -} - -enum xp_retval -xp_init_sn2(void) -{ - BUG_ON(!is_shub()); - - xp_max_npartitions = XP_MAX_NPARTITIONS_SN2; - xp_partition_id = sn_partition_id; - xp_region_size = sn_region_size; - - xp_pa = xp_pa_sn2; - xp_socket_pa = xp_socket_pa_sn2; - xp_remote_memcpy = xp_remote_memcpy_sn2; - xp_cpu_to_nasid = xp_cpu_to_nasid_sn2; - xp_expand_memprotect = xp_expand_memprotect_sn2; - xp_restrict_memprotect = xp_restrict_memprotect_sn2; - - return xp_register_nofault_code_sn2(); -} - -void -xp_exit_sn2(void) -{ - BUG_ON(!is_shub()); - - xp_unregister_nofault_code_sn2(); -} - diff --git a/drivers/misc/sgi-xp/xp_uv.c b/drivers/misc/sgi-xp/xp_uv.c index a0d093274dc0..f15a9f2ac1dd 100644 --- a/drivers/misc/sgi-xp/xp_uv.c +++ b/drivers/misc/sgi-xp/xp_uv.c @@ -17,7 +17,7 @@ #include <asm/uv/uv_hub.h> #if defined CONFIG_X86_64 #include <asm/uv/bios.h> -#elif defined CONFIG_IA64_GENERIC || defined CONFIG_IA64_SGI_UV +#elif defined CONFIG_IA64_SGI_UV #include <asm/sn/sn_sal.h> #endif #include "../sgi-gru/grukservices.h" @@ -99,7 +99,7 @@ xp_expand_memprotect_uv(unsigned long phys_addr, unsigned long size) return xpBiosError; } -#elif defined CONFIG_IA64_GENERIC || defined CONFIG_IA64_SGI_UV +#elif defined CONFIG_IA64_SGI_UV u64 nasid_array; ret = sn_change_memprotect(phys_addr, size, SN_MEMPROT_ACCESS_CLASS_1, @@ -129,7 +129,7 @@ xp_restrict_memprotect_uv(unsigned long phys_addr, unsigned long size) return xpBiosError; } -#elif defined CONFIG_IA64_GENERIC || defined CONFIG_IA64_SGI_UV +#elif defined CONFIG_IA64_SGI_UV u64 nasid_array; ret = sn_change_memprotect(phys_addr, size, SN_MEMPROT_ACCESS_CLASS_0, @@ -151,9 +151,10 @@ xp_init_uv(void) BUG_ON(!is_uv()); xp_max_npartitions = XP_MAX_NPARTITIONS_UV; +#ifdef CONFIG_X86 xp_partition_id = sn_partition_id; xp_region_size = sn_region_size; - +#endif xp_pa = xp_pa_uv; xp_socket_pa = xp_socket_pa_uv; xp_remote_memcpy = xp_remote_memcpy_uv; diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index b94d5f767703..71db60edff65 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -71,14 +71,10 @@ * 'SAL_nasids_size'. (Local partition's mask pointers are xpc_part_nasids * and xpc_mach_nasids.) * - * vars (ia64-sn2 only) - * vars part (ia64-sn2 only) - * * Immediately following the mach_nasids mask are the XPC variables * required by other partitions. First are those that are generic to all * partitions (vars), followed on the next available cacheline by those * which are partition specific (vars part). These are setup by XPC. - * (Local partition's vars pointers are xpc_vars and xpc_vars_part.) * * Note: Until 'ts_jiffies' is set non-zero, the partition XPC code has not been * initialized. @@ -93,9 +89,6 @@ struct xpc_rsvd_page { unsigned long ts_jiffies; /* timestamp when rsvd pg was setup by XPC */ union { struct { - unsigned long vars_pa; /* phys addr */ - } sn2; - struct { unsigned long heartbeat_gpa; /* phys addr */ unsigned long activate_gru_mq_desc_gpa; /* phys addr */ } uv; @@ -106,84 +99,14 @@ struct xpc_rsvd_page { #define XPC_RP_VERSION _XPC_VERSION(3, 0) /* version 3.0 of the reserved page */ -/* - * Define the structures by which XPC variables can be exported to other - * partitions. (There are two: struct xpc_vars and struct xpc_vars_part) - */ - -/* - * The following structure describes the partition generic variables - * needed by other partitions in order to properly initialize. - * - * struct xpc_vars version number also applies to struct xpc_vars_part. - * Changes to either structure and/or related functionality should be - * reflected by incrementing either the major or minor version numbers - * of struct xpc_vars. - */ -struct xpc_vars_sn2 { - u8 version; - u64 heartbeat; - DECLARE_BITMAP(heartbeating_to_mask, XP_MAX_NPARTITIONS_SN2); - u64 heartbeat_offline; /* if 0, heartbeat should be changing */ - int activate_IRQ_nasid; - int activate_IRQ_phys_cpuid; - unsigned long vars_part_pa; - unsigned long amos_page_pa;/* paddr of page of amos from MSPEC driver */ - struct amo *amos_page; /* vaddr of page of amos from MSPEC driver */ -}; - -#define XPC_V_VERSION _XPC_VERSION(3, 1) /* version 3.1 of the cross vars */ - -/* - * The following structure describes the per partition specific variables. - * - * An array of these structures, one per partition, will be defined. As a - * partition becomes active XPC will copy the array entry corresponding to - * itself from that partition. It is desirable that the size of this structure - * evenly divides into a 128-byte cacheline, such that none of the entries in - * this array crosses a 128-byte cacheline boundary. As it is now, each entry |