summaryrefslogtreecommitdiffstats
path: root/drivers/mfd/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mfd/Kconfig')
-rw-r--r--drivers/mfd/Kconfig75
1 files changed, 58 insertions, 17 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index b1a146205c08..acab3ef8a310 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -298,16 +298,6 @@ config MFD_TWL4030_AUDIO
select MFD_CORE
default n
-config TWL6030_PWM
- tristate "TWL6030 PWM (Pulse Width Modulator) Support"
- depends on TWL4030_CORE
- select HAVE_PWM
- depends on !PWM
- default n
- help
- Say yes here if you want support for TWL6030 PWM.
- This is used to control charging LED brightness.
-
config TWL6040_CORE
bool "Support for TWL6040 audio codec"
depends on I2C=y && GENERIC_HARDIRQS
@@ -385,6 +375,18 @@ config MFD_T7L66XB
help
Support for Toshiba Mobile IO Controller T7L66XB
+config MFD_SMSC
+ bool "Support for the SMSC ECE1099 series chips"
+ depends on I2C=y
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ If you say yes here you get support for the
+ ece1099 chips from SMSC.
+
+ To compile this driver as a module, choose M here: the
+ module will be called smsc.
+
config MFD_TC6387XB
bool "Support Toshiba TC6387XB"
depends on ARM && HAVE_CLK
@@ -441,6 +443,23 @@ config MFD_DA9052_I2C
for accessing the device, additional drivers must be enabled in
order to use the functionality of the device.
+config MFD_DA9055
+ bool "Dialog Semiconductor DA9055 PMIC Support"
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ select PMIC_DA9055
+ select MFD_CORE
+ depends on I2C=y
+ help
+ Say yes here for support of Dialog Semiconductor DA9055. This is
+ a Power Management IC. This driver provides common support for
+ accessing the device as well as the I2C interface to the chip itself.
+ Additional drivers must be enabled in order to use the functionality
+ of the device.
+
+ This driver can be built as a module. If built as a module it will be
+ called "da9055"
+
config PMIC_ADP5520
bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
depends on I2C=y
@@ -451,6 +470,16 @@ config PMIC_ADP5520
individual components like LCD backlight, LEDs, GPIOs and Kepad
under the corresponding menus.
+config MFD_LP8788
+ bool "Texas Instruments LP8788 Power Management Unit Driver"
+ depends on I2C=y
+ select MFD_CORE
+ select REGMAP_I2C
+ select IRQ_DOMAIN
+ help
+ TI LP8788 PMU supports regulators, battery charger, RTC,
+ ADC, backlight driver and current sinks.
+
config MFD_MAX77686
bool "Maxim Semiconductor MAX77686 PMIC Support"
depends on I2C=y && GENERIC_HARDIRQS
@@ -477,6 +506,18 @@ config MFD_MAX77693
additional drivers must be enabled in order to use the functionality
of the device.
+config MFD_MAX8907
+ tristate "Maxim Semiconductor MAX8907 PMIC Support"
+ select MFD_CORE
+ depends on I2C=y && GENERIC_HARDIRQS
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ help
+ Say yes here to support for Maxim Semiconductor MAX8907. This is
+ a Power Management IC. This driver provides common support for
+ accessing the device; additional drivers must be enabled in order
+ to use the functionality of the device.
+
config MFD_MAX8925
bool "Maxim Semiconductor MAX8925 PMIC Support"
depends on I2C=y && GENERIC_HARDIRQS
@@ -896,7 +937,7 @@ config MFD_WL1273_CORE
audio codec.
config MFD_OMAP_USB_HOST
- bool "Support OMAP USBHS core driver"
+ bool "Support OMAP USBHS core and TLL driver"
depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
default y
help
@@ -985,13 +1026,13 @@ config MFD_STA2X11
depends on STA2X11
select MFD_CORE
-config MFD_ANATOP
- bool "Support for Freescale i.MX on-chip ANATOP controller"
- depends on SOC_IMX6Q
+config MFD_SYSCON
+ bool "System Controller Register R/W Based on Regmap"
+ depends on OF
+ select REGMAP_MMIO
help
- Select this option to enable Freescale i.MX on-chip ANATOP
- MFD controller. This controller embeds regulator and
- thermal devices for Freescale i.MX platforms.
+ Select this option to enable accessing system control registers
+ via regmap.
config MFD_PALMAS
bool "Support for the TI Palmas series chips"