diff options
Diffstat (limited to 'drivers/isdn')
102 files changed, 0 insertions, 55481 deletions
diff --git a/drivers/isdn/Makefile b/drivers/isdn/Makefile index e7d3d8f2ad5a..7487f0bbe855 100644 --- a/drivers/isdn/Makefile +++ b/drivers/isdn/Makefile @@ -8,7 +8,6 @@ obj-$(CONFIG_ISDN_CAPI) += capi/ obj-$(CONFIG_MISDN) += mISDN/ obj-$(CONFIG_ISDN) += hardware/ obj-$(CONFIG_ISDN_DIVERSION) += divert/ -obj-$(CONFIG_ISDN_DRV_HISAX) += hisax/ obj-$(CONFIG_ISDN_DRV_LOOP) += isdnloop/ obj-$(CONFIG_HYSDN) += hysdn/ obj-$(CONFIG_ISDN_DRV_GIGASET) += gigaset/ diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig deleted file mode 100644 index 43d98ccf5ff6..000000000000 --- a/drivers/isdn/hisax/Kconfig +++ /dev/null @@ -1,423 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - -menu "Passive cards" - -config ISDN_DRV_HISAX - tristate "HiSax SiemensChipSet driver support" - select CRC_CCITT - ---help--- - This is a driver supporting the Siemens chipset on various - ISDN-cards (like AVM A1, Elsa ISDN cards, Teles S0-16.0, Teles - S0-16.3, Teles S0-8, Teles/Creatix PnP, ITK micro ix1 and many - compatibles). - - HiSax is just the name of this driver, not the name of any hardware. - - If you have a card with such a chipset, you should say Y here and - also to the configuration option of the driver for your particular - card, below. - -if ISDN_DRV_HISAX - -comment "D-channel protocol features" - -config HISAX_EURO - bool "HiSax Support for EURO/DSS1" - help - Say Y or N according to the D-channel protocol which your local - telephone service company provides. - - The call control protocol E-DSS1 is used in most European countries. - If unsure, say Y. - -config DE_AOC - bool "Support for german chargeinfo" - depends on HISAX_EURO - help - If you want that the HiSax hardware driver sends messages to the - upper level of the isdn code on each AOCD (Advice Of Charge, During - the call -- transmission of the fee information during a call) and - on each AOCE (Advice Of Charge, at the End of the call -- - transmission of fee information at the end of the call), say Y here. - This works only in Germany. - -config HISAX_NO_SENDCOMPLETE - bool "Disable sending complete" - depends on HISAX_EURO - help - If you have trouble with some ugly exchanges or you live in - Australia select this option. - -config HISAX_NO_LLC - bool "Disable sending low layer compatibility" - depends on HISAX_EURO - help - If you have trouble with some ugly exchanges try to select this - option. - -config HISAX_NO_KEYPAD - bool "Disable keypad protocol option" - depends on HISAX_EURO - help - If you like to send special dial strings including * or # without - using the keypad protocol, select this option. - -config HISAX_1TR6 - bool "HiSax Support for german 1TR6" - help - Say Y or N according to the D-channel protocol which your local - telephone service company provides. - - 1TR6 is an old call control protocol which was used in Germany - before E-DSS1 was established. Nowadays, all new lines in Germany - use E-DSS1. - -config HISAX_NI1 - bool "HiSax Support for US NI1" - help - Enable this if you like to use ISDN in US on a NI1 basic rate - interface. - -config HISAX_MAX_CARDS - int "Maximum number of cards supported by HiSax" - default "8" - help - This option allows you to specify the maximum number of cards which - the HiSax driver will be able to handle. - -comment "HiSax supported cards" - -config HISAX_16_0 - bool "Teles 16.0/8.0" - depends on ISA - help - This enables HiSax support for the Teles ISDN-cards S0-16.0, S0-8 - and many compatibles. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using the different cards, a different D-channel protocol, or - non-standard IRQ/port/shmem settings. - -config HISAX_16_3 - bool "Teles 16.3 or PNP or PCMCIA" - help - This enables HiSax support for the Teles ISDN-cards S0-16.3 the - Teles/Creatix PnP and the Teles PCMCIA. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using the different cards, a different D-channel protocol, or - non-standard IRQ/port settings. - -config HISAX_TELESPCI - bool "Teles PCI" - depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || (XTENSA && !CPU_LITTLE_ENDIAN))) - help - This enables HiSax support for the Teles PCI. - See <file:Documentation/isdn/README.HiSax> on how to configure it. - -config HISAX_S0BOX - bool "Teles S0Box" - help - This enables HiSax support for the Teles/Creatix parallel port - S0BOX. See <file:Documentation/isdn/README.HiSax> on how to - configure it. - -config HISAX_AVM_A1 - bool "AVM A1 (Fritz)" - depends on ISA - help - This enables HiSax support for the AVM A1 (aka "Fritz"). - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using the different cards, a different D-channel protocol, or - non-standard IRQ/port settings. - -config HISAX_FRITZPCI - bool "AVM PnP/PCI (Fritz!PnP/PCI)" - depends on BROKEN || !PPC64 - help - This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI". - See <file:Documentation/isdn/README.HiSax> on how to configure it. - -config HISAX_AVM_A1_PCMCIA - bool "AVM A1 PCMCIA (Fritz)" - help - This enables HiSax support for the AVM A1 "Fritz!PCMCIA"). - See <file:Documentation/isdn/README.HiSax> on how to configure it. - -config HISAX_ELSA - bool "Elsa cards" - help - This enables HiSax support for the Elsa Mircolink ISA cards, for the - Elsa Quickstep series cards and Elsa PCMCIA. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using the different cards, a different D-channel protocol, or - non-standard IRQ/port settings. - -config HISAX_IX1MICROR2 - bool "ITK ix1-micro Revision 2" - depends on ISA - help - This enables HiSax support for the ITK ix1-micro Revision 2 card. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using the different cards, a different D-channel protocol, or - non-standard IRQ/port settings. - -config HISAX_DIEHLDIVA - bool "Eicon.Diehl Diva cards" - help - This enables HiSax support for the Eicon.Diehl Diva none PRO - versions passive ISDN cards. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using the different cards, a different D-channel protocol, or - non-standard IRQ/port settings. - -config HISAX_ASUSCOM - bool "ASUSCOM ISA cards" - depends on ISA - help - This enables HiSax support for the AsusCom and their OEM versions - passive ISDN ISA cards. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using the different cards, a different D-channel protocol, or - non-standard IRQ/port settings. - -config HISAX_TELEINT - bool "TELEINT cards" - depends on ISA - help - This enables HiSax support for the TELEINT SA1 semiactiv ISDN card. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using the different cards, a different D-channel protocol, or - non-standard IRQ/port settings. - -config HISAX_HFCS - bool "HFC-S based cards" - depends on ISA - help - This enables HiSax support for the HFC-S 2BDS0 based cards, like - teles 16.3c. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using the different cards, a different D-channel protocol, or - non-standard IRQ/port settings. - -config HISAX_SEDLBAUER - bool "Sedlbauer cards" - help - This enables HiSax support for the Sedlbauer passive ISDN cards. - - See <file:Documentation/isdn/README.HiSax> on how to configure it - using the different cards, a different D-channel protocol, |