diff options
Diffstat (limited to 'drivers/iio')
70 files changed, 10873 insertions, 936 deletions
diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig index 345395e9dc6e..4011effe4c05 100644 --- a/drivers/iio/Kconfig +++ b/drivers/iio/Kconfig @@ -21,13 +21,12 @@ config IIO_BUFFER if IIO_BUFFER config IIO_BUFFER_CB -boolean "IIO callback buffer used for push in-kernel interfaces" + bool "IIO callback buffer used for push in-kernel interfaces" help Should be selected by any drivers that do in-kernel push usage. That is, those where the data is pushed to the consumer. config IIO_KFIFO_BUF - select IIO_TRIGGER tristate "Industrial I/O buffering based on kfifo" help A simple fifo based on kfifo. Note that this currently provides @@ -44,7 +43,7 @@ config IIO_TRIGGERED_BUFFER endif # IIO_BUFFER config IIO_TRIGGER - boolean "Enable triggered sampling support" + bool "Enable triggered sampling support" help Provides IIO core support for triggers. Currently these are used to initialize capture of samples to push into diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index 9b9be8725e9d..7c9a9a94a8ce 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -43,6 +43,9 @@ config HID_SENSOR_ACCEL_3D Say yes here to build support for the HID SENSOR accelerometers 3D. + To compile this driver as a module, choose M here: the + module will be called hid-sensor-accel-3d. + config IIO_ST_ACCEL_3AXIS tristate "STMicroelectronics accelerometers 3-Axis Driver" depends on (I2C || SPI_MASTER) && SYSFS @@ -80,6 +83,9 @@ config KXSD9 Say yes here to build support for the Kionix KXSD9 accelerometer. Currently this only supports the device via an SPI interface. + To compile this driver as a module, choose M here: the module + will be called kxsd9. + config MMA8452 tristate "Freescale MMA8452Q Accelerometer Driver" depends on I2C @@ -105,4 +111,29 @@ config KXCJK1013 To compile this driver as a module, choose M here: the module will be called kxcjk-1013. +config MMA9551_CORE + tristate + +config MMA9551 + tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver" + depends on I2C + select MMA9551_CORE + + help + Say yes here to build support for the Freescale MMA9551L + Intelligent Motion-Sensing Platform Driver. + + To compile this driver as a module, choose M here: the module + will be called mma9551. + +config MMA9553 + tristate "Freescale MMA9553L Intelligent Pedometer Platform Driver" + depends on I2C + select MMA9551_CORE + help + Say yes here to build support for the Freescale MMA9553L + Intelligent Pedometer Platform Driver. + + To compile this driver as a module, choose M here: the module + will be called mma9553. endmenu diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile index a593996c6539..99d89e46cad1 100644 --- a/drivers/iio/accel/Makefile +++ b/drivers/iio/accel/Makefile @@ -10,6 +10,12 @@ obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o obj-$(CONFIG_KXSD9) += kxsd9.o obj-$(CONFIG_MMA8452) += mma8452.o +obj-$(CONFIG_MMA9551_CORE) += mma9551_core.o +obj-$(CONFIG_MMA9551) += mma9551.o +obj-$(CONFIG_MMA9553) += mma9553.o + +obj-$(CONFIG_IIO_SSP_SENSORS_COMMONS) += ssp_accel_sensor.o + obj-$(CONFIG_IIO_ST_ACCEL_3AXIS) += st_accel.o st_accel-y := st_accel_core.o st_accel-$(CONFIG_IIO_BUFFER) += st_accel_buffer.o diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c index d5d95317003a..df6a593bd4bd 100644 --- a/drivers/iio/accel/hid-sensor-accel-3d.c +++ b/drivers/iio/accel/hid-sensor-accel-3d.c @@ -111,19 +111,12 @@ static int accel_3d_read_raw(struct iio_dev *indio_dev, int report_id = -1; u32 address; int ret_type; - s32 poll_value; *val = 0; *val2 = 0; switch (mask) { case 0: - poll_value = hid_sensor_read_poll_value( - &accel_state->common_attributes); - if (poll_value < 0) - return -EINVAL; - hid_sensor_power_state(&accel_state->common_attributes, true); - msleep_interruptible(poll_value * 2); report_id = accel_state->accel[chan->scan_index].report_id; address = accel_3d_addresses[chan->scan_index]; if (report_id >= 0) @@ -419,6 +412,7 @@ static struct platform_driver hid_accel_3d_platform_driver = { .id_table = hid_accel_3d_ids, .driver = { .name = KBUILD_MODNAME, + .pm = &hid_sensor_pm_ops, }, .probe = hid_accel_3d_probe, .remove = hid_accel_3d_remove, diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c index da2fe93739a2..567de269cc00 100644 --- a/drivers/iio/accel/kxcjk-1013.c +++ b/drivers/iio/accel/kxcjk-1013.c @@ -108,6 +108,7 @@ struct kxcjk1013_data { bool motion_trigger_on; int64_t timestamp; enum kx_chipset chipset; + bool is_smo8500_device; }; enum kxcjk1013_axis { @@ -377,6 +378,7 @@ static int kxcjk1013_get_startup_times(struct kxcjk1013_data *data) static int kxcjk1013_set_power_state(struct kxcjk1013_data *data, bool on) { +#ifdef CONFIG_PM int ret; if (on) @@ -388,8 +390,11 @@ static int kxcjk1013_set_power_state(struct kxcjk1013_data *data, bool on) if (ret < 0) { dev_err(&data->client->dev, "Failed: kxcjk1013_set_power_state for %d\n", on); + if (on) + pm_runtime_put_noidle(&data->client->dev); return ret; } +#endif return 0; } @@ -858,6 +863,8 @@ static int kxcjk1013_write_event_config(struct iio_dev *indio_dev, ret = kxcjk1013_setup_any_motion_interrupt(data, state); if (ret < 0) { + kxcjk1013_set_power_state(data, false); + data->ev_enable_state = 0; mutex_unlock(&data->mutex); return ret; } @@ -1008,6 +1015,7 @@ static int kxcjk1013_data_rdy_trigger_set_state(struct iio_trigger *trig, else ret = kxcjk1013_setup_new_data_interrupt(data, state); if (ret < 0) { + kxcjk1013_set_power_state(data, false); mutex_unlock(&data->mutex); return ret; } @@ -1131,12 +1139,16 @@ static irqreturn_t kxcjk1013_data_rdy_trig_poll(int irq, void *private) } static const char *kxcjk1013_match_acpi_device(struct device *dev, - enum kx_chipset *chipset) + enum kx_chipset *chipset, + bool *is_smo8500_device) { const struct acpi_device_id *id; + id = acpi_match_device(dev->driver->acpi_match_table, dev); if (!id) return NULL; + if (strcmp(id->id, "SMO8500") == 0) + *is_smo8500_device = true; *chipset = (enum kx_chipset)id->driver_data; return dev_name(dev); @@ -1151,6 +1163,8 @@ static int kxcjk1013_gpio_probe(struct i2c_client *client, if (!client) return -EINVAL; + if (data->is_smo8500_device) + return -ENOTSUPP; dev = &client->dev; @@ -1200,7 +1214,8 @@ static int kxcjk1013_probe(struct i2c_client *client, name = id->name; } else if (ACPI_HANDLE(&client->dev)) { name = kxcjk1013_match_acpi_device(&client->dev, - &data->chipset); + &data->chipset, + &data->is_smo8500_device); } else return -ENODEV; @@ -1228,21 +1243,25 @@ static int kxcjk1013_probe(struct i2c_client *client, KXCJK1013_IRQ_NAME, indio_dev); if (ret) - return ret; + goto err_poweroff; data->dready_trig = devm_iio_trigger_alloc(&client->dev, "%s-dev%d", indio_dev->name, indio_dev->id); - if (!data->dready_trig) - return -ENOMEM; + if (!data->dready_trig) { + ret = -ENOMEM; + goto err_poweroff; + } data->motion_trig = devm_iio_trigger_alloc(&client->dev, "%s-any-motion-dev%d", indio_dev->name, indio_dev->id); - if (!data->motion_trig) - return -ENOMEM; + if (!data->motion_trig) { + ret = -ENOMEM; + goto err_poweroff; + } data->dready_trig->dev.parent = &client->dev; data->dready_trig->ops = &kxcjk1013_trigger_ops; @@ -1251,7 +1270,7 @@ static int kxcjk1013_probe(struct i2c_client *client, iio_trigger_get(indio_dev->trig); ret = iio_trigger_register(data->dready_trig); if (ret) - return ret; + goto err_poweroff; data->motion_trig->dev.parent = &client->dev; data->motion_trig->ops = &kxcjk1013_trigger_ops; @@ -1300,6 +1319,8 @@ err_trigger_unregister: iio_trigger_unregister(data->dready_trig); if (data->motion_trig) iio_trigger_unregister(data->motion_trig); +err_poweroff: + kxcjk1013_set_mode(data, STANDBY); return ret; } @@ -1349,10 +1370,7 @@ static int kxcjk1013_resume(struct device *dev) int ret = 0; mutex_lock(&data->mutex); - /* Check, if the suspend occured while active */ - if (data->dready_trigger_on || data->motion_trigger_on || - data->ev_enable_state) - ret = kxcjk1013_set_mode(data, OPERATION); + ret = kxcjk1013_set_mode(data, OPERATION); mutex_unlock(&data->mutex); return ret; @@ -1364,8 +1382,14 @@ static int kxcjk1013_runtime_suspend(struct device *dev) { struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); struct kxcjk1013_data *data = iio_priv(indio_dev); + int ret; - return kxcjk1013_set_mode(data, STANDBY); + ret = kxcjk1013_set_mode(data, STANDBY); + if (ret < 0) { + dev_err(&data->client->dev, "powering off device failed\n"); + return -EAGAIN; + } + return 0; } static int kxcjk1013_runtime_resume(struct device *dev) @@ -1399,6 +1423,7 @@ static const struct acpi_device_id kx_acpi_match[] = { {"KXCJ1013", KXCJK1013}, {"KXCJ1008", KXCJ91008}, {"KXTJ1009", KXTJ21009}, + {"SMO8500", KXCJ91008}, { }, }; MODULE_DEVICE_TABLE(acpi, kx_acpi_match); @@ -1407,6 +1432,7 @@ static const struct i2c_device_id kxcjk1013_id[] = { {"kxcjk1013", KXCJK1013}, {"kxcj91008", KXCJ91008}, {"kxtj21009", KXTJ21009}, + {"SMO8500", KXCJ91008}, {} }; diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c index 3c12d4966376..5b80657883bb 100644 --- a/drivers/iio/accel/mma8452.c +++ b/drivers/iio/accel/mma8452.c @@ -111,7 +111,7 @@ static const int mma8452_samp_freq[8][2] = { {6, 250000}, {1, 560000} }; -/* +/* * Hardware has fullscale of -2G, -4G, -8G corresponding to raw value -2048 * The userspace interface uses m/s^2 and we declare micro units * So scale factor is given by: diff --git a/drivers/iio/accel/mma9551.c b/drivers/iio/accel/mma9551.c new file mode 100644 index 000000000000..46c38351c6a3 --- /dev/null +++ b/drivers/iio/accel/mma9551.c @@ -0,0 +1,637 @@ +/* + * Freescale MMA9551L Intelligent Motion-Sensing Platform driver + * Copyright (c) 2014, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/acpi.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/events.h> +#include <linux/pm_runtime.h> +#include "mma9551_core.h" + +#define MMA9551_DRV_NAME "mma9551" +#define MMA9551_IRQ_NAME "mma9551_event" +#define MMA9551_GPIO_NAME "mma9551_int" +#define MMA9551_GPIO_COUNT 4 + +/* Tilt application (inclination in IIO terms). */ +#define MMA9551_TILT_XZ_ANG_REG 0x00 +#define MMA9551_TILT_YZ_ANG_REG 0x01 +#define MMA9551_TILT_XY_ANG_REG 0x02 +#define MMA9551_TILT_ANGFLG BIT(7) +#define MMA9551_TILT_QUAD_REG 0x03 +#define MMA9551_TILT_XY_QUAD_SHIFT 0 +#define MMA9551_TILT_YZ_QUAD_SHIFT 2 +#define MMA9551_TILT_XZ_QUAD_SHIFT 4 +#define MMA9551_TILT_CFG_REG 0x01 +#define MMA9551_TILT_ANG_THRESH_MASK GENMASK(3, 0) + +#define MMA9551_DEFAULT_SAMPLE_RATE 122 /* Hz */ + +/* Tilt events are mapped to the first three GPIO pins. */ +enum mma9551_tilt_axis { + mma9551_x = 0, + mma9551_y, + mma9551_z, +}; + +struct mma9551_data { + struct i2c_client *client; + struct mutex mutex; + int event_enabled[3]; + int irqs[MMA9551_GPIO_COUNT]; +}; + +static int mma9551_read_incli_chan(struct i2c_client *client, + const struct iio_chan_spec *chan, + int *val) +{ + u8 quad_shift, angle, quadrant; + u16 reg_addr; + int ret; + + switch (chan->channel2) { + case IIO_MOD_X: + reg_addr = MMA9551_TILT_YZ_ANG_REG; + quad_shift = MMA9551_TILT_YZ_QUAD_SHIFT; + break; + case IIO_MOD_Y: + reg_addr = MMA9551_TILT_XZ_ANG_REG; + quad_shift = MMA9551_TILT_XZ_QUAD_SHIFT; + break; + case IIO_MOD_Z: + reg_addr = MMA9551_TILT_XY_ANG_REG; + quad_shift = MMA9551_TILT_XY_QUAD_SHIFT; + break; + default: + return -EINVAL; + } + + ret = mma9551_set_power_state(client, true); + if (ret < 0) + return ret; + + ret = mma9551_read_status_byte(client, MMA9551_APPID_TILT, + reg_addr, &angle); + if (ret < 0) + goto out_poweroff; + + ret = mma9551_read_status_byte(client, MMA9551_APPID_TILT, + MMA9551_TILT_QUAD_REG, &quadrant); + if (ret < 0) + goto out_poweroff; + + angle &= ~MMA9551_TILT_ANGFLG; + quadrant = (quadrant >> quad_shift) & 0x03; + + if (quadrant == 1 || quadrant == 3) + *val = 90 * (quadrant + 1) - angle; + else + *val = angle + 90 * quadrant; + + ret = IIO_VAL_INT; + +out_poweroff: + mma9551_set_power_state(client, false); + return ret; +} + +static int mma9551_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct mma9551_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + switch (chan->type) { + case IIO_INCLI: + mutex_lock(&data->mutex); + ret = mma9551_read_incli_chan(data->client, chan, val); + mutex_unlock(&data->mutex); + return ret; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_ACCEL: + mutex_lock(&data->mutex); + ret = mma9551_read_accel_chan(data->client, + chan, val, val2); + mutex_unlock(&data->mutex); + return ret; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_ACCEL: + return mma9551_read_accel_scale(val, val2); + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static int mma9551_read_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir) +{ + struct mma9551_data *data = iio_priv(indio_dev); + + switch (chan->type) { + case IIO_INCLI: + /* IIO counts axes from 1, because IIO_NO_MOD is 0. */ + return data->event_enabled[chan->channel2 - 1]; + default: + return -EINVAL; + } +} + +static int mma9551_config_incli_event(struct iio_dev *indio_dev, + enum iio_modifier axis, + int state) +{ + struct mma9551_data *data = iio_priv(indio_dev); |