diff options
Diffstat (limited to 'drivers/i2c')
37 files changed, 810 insertions, 924 deletions
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 7b7ea320a258..3e3b680dc007 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -2,7 +2,9 @@ # I2C subsystem configuration # -menuconfig I2C +menu "I2C support" + +config I2C tristate "I2C support" select RT_MUTEXES ---help--- @@ -21,6 +23,18 @@ menuconfig I2C This I2C support can also be built as a module. If so, the module will be called i2c-core. +config I2C_ACPI + bool "I2C ACPI support" + select I2C + depends on ACPI + default y + help + Say Y here if you want to enable ACPI I2C support. This includes support + for automatic enumeration of I2C slave devices and support for ACPI I2C + Operation Regions. Operation Regions allow firmware (BIOS) code to + access I2C slave devices, such as smart batteries through an I2C host + controller driver. + if I2C config I2C_BOARDINFO @@ -124,3 +138,5 @@ config I2C_DEBUG_BUS on. endif # I2C + +endmenu diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 1722f50f2473..a1f590cbb435 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -2,8 +2,11 @@ # Makefile for the i2c core. # +i2ccore-y := i2c-core.o +i2ccore-$(CONFIG_I2C_ACPI) += i2c-acpi.o + obj-$(CONFIG_I2C_BOARDINFO) += i2c-boardinfo.o -obj-$(CONFIG_I2C) += i2c-core.o +obj-$(CONFIG_I2C) += i2ccore.o obj-$(CONFIG_I2C_SMBUS) += i2c-smbus.o obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o obj-$(CONFIG_I2C_MUX) += i2c-mux.o diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 9f7d5859cf65..2ac87fa3058d 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -109,6 +109,7 @@ config I2C_I801 Avoton (SOC) Wellsburg (PCH) Coleto Creek (PCH) + Wildcat Point (PCH) Wildcat Point-LP (PCH) BayTrail (SOC) @@ -465,9 +466,9 @@ config I2C_EG20T config I2C_EXYNOS5 tristate "Exynos5 high-speed I2C driver" depends on ARCH_EXYNOS5 && OF + default y help - Say Y here to include support for high-speed I2C controller in the - Exynos5 based Samsung SoCs. + High-speed I2C controller on Exynos5 based Samsung SoCs. config I2C_GPIO tristate "GPIO-based bitbanging I2C" @@ -700,16 +701,6 @@ config I2C_S3C2410 Say Y here to include support for I2C controller in the Samsung SoCs. -config I2C_S6000 - tristate "S6000 I2C support" - depends on XTENSA_VARIANT_S6000 - help - This driver supports the on chip I2C device on the - S6000 xtensa processor family. - - To compile this driver as a module, choose M here. The module - will be called i2c-s6000. - config I2C_SH7760 tristate "Renesas SH7760 I2C Controller" depends on CPU_SUBTYPE_SH7760 @@ -1018,37 +1009,6 @@ config I2C_CROS_EC_TUNNEL connected there. This will work whatever the interface used to talk to the EC (SPI, I2C or LPC). -config SCx200_I2C - tristate "NatSemi SCx200 I2C using GPIO pins (DEPRECATED)" - depends on SCx200_GPIO - select I2C_ALGOBIT - help - Enable the use of two GPIO pins of a SCx200 processor as an I2C bus. - - If you don't know what to do here, say N. - - This support is also available as a module. If so, the module - will be called scx200_i2c. - - This driver is deprecated and will be dropped soon. Use i2c-gpio - (or scx200_acb) instead. - -config SCx200_I2C_SCL - int "GPIO pin used for SCL" - depends on SCx200_I2C - default "12" - help - Enter the GPIO pin number used for the SCL signal. This value can - also be specified with a module parameter. - -config SCx200_I2C_SDA - int "GPIO pin used for SDA" - depends on SCx200_I2C - default "13" - help - Enter the GPIO pin number used for the SSA signal. This value can - also be specified with a module parameter. - config SCx200_ACB tristate "Geode ACCESS.bus support" depends on X86_32 && PCI diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index dd9a7f8e873f..49bf07e5ef4d 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -68,7 +68,6 @@ obj-$(CONFIG_I2C_QUP) += i2c-qup.o obj-$(CONFIG_I2C_RIIC) += i2c-riic.o obj-$(CONFIG_I2C_RK3X) += i2c-rk3x.o obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o -obj-$(CONFIG_I2C_S6000) += i2c-s6000.o obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o @@ -101,6 +100,5 @@ obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o obj-$(CONFIG_SCx200_ACB) += scx200_acb.o -obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c index e95f9ba96790..79a68999a696 100644 --- a/drivers/i2c/busses/i2c-at91.c +++ b/drivers/i2c/busses/i2c-at91.c @@ -210,7 +210,7 @@ static void at91_twi_write_data_dma_callback(void *data) struct at91_twi_dev *dev = (struct at91_twi_dev *)data; dma_unmap_single(dev->dev, sg_dma_address(&dev->dma.sg), - dev->buf_len, DMA_MEM_TO_DEV); + dev->buf_len, DMA_TO_DEVICE); at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP); } @@ -289,7 +289,7 @@ static void at91_twi_read_data_dma_callback(void *data) struct at91_twi_dev *dev = (struct at91_twi_dev *)data; dma_unmap_single(dev->dev, sg_dma_address(&dev->dma.sg), - dev->buf_len, DMA_DEV_TO_MEM); + dev->buf_len, DMA_FROM_DEVICE); /* The last two bytes have to be read without using dma */ dev->buf += dev->buf_len - 2; @@ -768,7 +768,7 @@ static int at91_twi_probe(struct platform_device *pdev) snprintf(dev->adapter.name, sizeof(dev->adapter.name), "AT91"); i2c_set_adapdata(&dev->adapter, dev); dev->adapter.owner = THIS_MODULE; - dev->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED; + dev->adapter.class = I2C_CLASS_DEPRECATED; dev->adapter.algo = &at91_twi_algorithm; dev->adapter.dev.parent = dev->dev; dev->adapter.nr = pdev->id; diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c index 214ff9700efe..4b8ecd0b3661 100644 --- a/drivers/i2c/busses/i2c-bcm2835.c +++ b/drivers/i2c/busses/i2c-bcm2835.c @@ -277,7 +277,7 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) adap = &i2c_dev->adapter; i2c_set_adapdata(adap, i2c_dev); adap->owner = THIS_MODULE; - adap->class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED; + adap->class = I2C_CLASS_DEPRECATED; strlcpy(adap->name, "bcm2835 I2C adapter", sizeof(adap->name)); adap->algo = &bcm2835_i2c_algo; adap->dev.parent = &pdev->dev; diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c index 3e271e7558d3..067c1615e968 100644 --- a/drivers/i2c/busses/i2c-bfin-twi.c +++ b/drivers/i2c/busses/i2c-bfin-twi.c @@ -648,7 +648,7 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev) strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name)); p_adap->algo = &bfin_twi_algorithm; p_adap->algo_data = iface; - p_adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD | I2C_CLASS_DEPRECATED; + p_adap->class = I2C_CLASS_DEPRECATED; p_adap->dev.parent = &pdev->dev; p_adap->timeout = 5 * HZ; p_adap->retries = 3; diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index 389bc68c55ad..4d9614719128 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -712,7 +712,7 @@ static int davinci_i2c_probe(struct platform_device *pdev) adap = &dev->adapter; i2c_set_adapdata(adap, dev); adap->owner = THIS_MODULE; - adap->class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED; + adap->class = I2C_CLASS_DEPRECATED; strlcpy(adap->name, "DaVinci I2C adapter", sizeof(adap->name)); adap->algo = &i2c_davinci_algo; adap->dev.parent = &pdev->dev; diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index 3356f7ab9f79..d31d313ab4f7 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -188,6 +188,7 @@ static struct dw_pci_controller dw_pci_controllers[] = { .scl_sda_cfg = &hsw_config, }, }; + static struct i2c_algorithm i2c_dw_algo = { .master_xfer = i2c_dw_xfer, .functionality = i2c_dw_func, @@ -350,6 +351,14 @@ static const struct pci_device_id i2_designware_pci_ids[] = { /* Haswell */ { PCI_VDEVICE(INTEL, 0x9c61), haswell }, { PCI_VDEVICE(INTEL, 0x9c62), haswell }, + /* Braswell / Cherrytrail */ + { PCI_VDEVICE(INTEL, 0x22C1), baytrail,}, + { PCI_VDEVICE(INTEL, 0x22C2), baytrail }, + { PCI_VDEVICE(INTEL, 0x22C3), baytrail }, + { PCI_VDEVICE(INTEL, 0x22C4), baytrail }, + { PCI_VDEVICE(INTEL, 0x22C5), baytrail }, + { PCI_VDEVICE(INTEL, 0x22C6), baytrail }, + { PCI_VDEVICE(INTEL, 0x22C7), baytrail }, { 0,} }; MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids); diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 402ec3970fed..bc8773333155 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -106,6 +106,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = { { "INT3432", 0 }, { "INT3433", 0 }, { "80860F41", 0 }, + { "808622C1", 0 }, { } }; MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match); @@ -202,7 +203,7 @@ static int dw_i2c_probe(struct platform_device *pdev) adap = &dev->adapter; i2c_set_adapdata(adap, dev); adap->owner = THIS_MODULE; - adap->class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED; + adap->class = I2C_CLASS_DEPRECATED; strlcpy(adap->name, "Synopsys DesignWare I2C adapter", sizeof(adap->name)); adap->algo = &i2c_dw_algo; diff --git a/drivers/i2c/busses/i2c-efm32.c b/drivers/i2c/busses/i2c-efm32.c index f7eccd682de9..10b8323b08d4 100644 --- a/drivers/i2c/busses/i2c-efm32.c +++ b/drivers/i2c/busses/i2c-efm32.c @@ -370,7 +370,13 @@ static int efm32_i2c_probe(struct platform_device *pdev) return ret; } - ret = of_property_read_u32(np, "efm32,location", &location); + + ret = of_property_read_u32(np, "energymicro,location", &location); + + if (ret) + /* fall back to wrongly namespaced property */ + ret = of_property_read_u32(np, "efm32,location", &location); + if (!ret) { dev_dbg(&pdev->dev, "using location %u\n", location); } else { diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c index 63d229202854..28073f1d6d47 100644 --- a/drivers/i2c/busses/i2c-exynos5.c +++ b/drivers/i2c/busses/i2c-exynos5.c @@ -405,7 +405,6 @@ static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id) int_status = readl(i2c->regs + HSI2C_INT_STATUS); writel(int_status, i2c->regs + HSI2C_INT_STATUS); - fifo_status = readl(i2c->regs + HSI2C_FIFO_STATUS); /* handle interrupt related to the transfer status */ if (int_status & HSI2C_INT_I2C) { @@ -526,7 +525,7 @@ static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop) if (i2c->msg->flags & I2C_M_RD) { i2c_ctl |= HSI2C_RXCHON; - i2c_auto_conf = HSI2C_READ_WRITE; + i2c_auto_conf |= HSI2C_READ_WRITE; trig_lvl = (i2c->msg->len > i2c->variant->fifo_depth) ? (i2c->variant->fifo_depth * 3 / 4) : i2c->msg->len; @@ -549,7 +548,6 @@ static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop) writel(fifo_ctl, i2c->regs + HSI2C_FIFO_CTL); writel(i2c_ctl, i2c->regs + HSI2C_CTL); - /* * Enable interrupts before starting the transfer so that we don't * miss any INT_I2C interrupts. @@ -789,8 +787,16 @@ static int exynos5_i2c_resume_noirq(struct device *dev) } #endif -static SIMPLE_DEV_PM_OPS(exynos5_i2c_dev_pm_ops, exynos5_i2c_suspend_noirq, - exynos5_i2c_resume_noirq); +static const struct dev_pm_ops exynos5_i2c_dev_pm_ops = { +#ifdef CONFIG_PM_SLEEP + .suspend_noirq = exynos5_i2c_suspend_noirq, + .resume_noirq = exynos5_i2c_resume_noirq, + .freeze_noirq = exynos5_i2c_suspend_noirq, + .thaw_noirq = exynos5_i2c_resume_noirq, + .poweroff_noirq = exynos5_i2c_suspend_noirq, + .restore_noirq = exynos5_i2c_resume_noirq, +#endif +}; static struct platform_driver exynos5_i2c_driver = { .probe = exynos5_i2c_probe, diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index 71a45b210a24..933f1e453e41 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -238,12 +238,10 @@ static int i2c_gpio_probe(struct platform_device *pdev) static int i2c_gpio_remove(struct platform_device *pdev) { struct i2c_gpio_private_data *priv; - struct i2c_gpio_platform_data *pdata; struct i2c_adapter *adap; priv = platform_get_drvdata(pdev); adap = &priv->adap; - pdata = &priv->pdata; i2c_del_adapter(adap); diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 6777cd6f8776..2994690b26e9 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -22,57 +22,58 @@ */ /* - Supports the following Intel I/O Controller Hubs (ICH): - - I/O Block I2C - region SMBus Block proc. block - Chip name PCI ID size PEC buffer call read - ---------------------------------------------------------------------- - 82801AA (ICH) 0x2413 16 no no no no - 82801AB (ICH0) 0x2423 16 no no no no - 82801BA (ICH2) 0x2443 16 no no no no - 82801CA (ICH3) 0x2483 32 soft no no no - 82801DB (ICH4) 0x24c3 32 hard yes no no - 82801E (ICH5) 0x24d3 32 hard yes yes yes - 6300ESB 0x25a4 32 hard yes yes yes - 82801F (ICH6) 0x266a 32 hard yes yes yes - 6310ESB/6320ESB 0x269b 32 hard yes yes yes - 82801G (ICH7) 0x27da 32 hard yes yes yes - 82801H (ICH8) 0x283e 32 hard yes yes yes - 82801I (ICH9) 0x2930 32 hard yes yes yes - EP80579 (Tolapai) 0x5032 32 hard yes yes yes - ICH10 0x3a30 32 hard yes yes yes - ICH10 0x3a60 32 hard yes yes yes - 5/3400 Series (PCH) 0x3b30 32 hard yes yes yes - 6 Series (PCH) 0x1c22 32 hard yes yes yes - Patsburg (PCH) 0x1d22 32 hard yes yes yes - Patsburg (PCH) IDF 0x1d70 32 hard yes yes yes - Patsburg (PCH) IDF 0x1d71 32 hard yes yes yes - Patsburg (PCH) IDF 0x1d72 32 hard yes yes yes - DH89xxCC (PCH) 0x2330 32 hard yes yes yes - Panther Point (PCH) 0x1e22 32 hard yes yes yes - Lynx Point (PCH) 0x8c22 32 hard yes yes yes - Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes - Avoton (SOC) 0x1f3c 32 hard yes yes yes - Wellsburg (PCH) 0x8d22 32 hard yes yes yes - Wellsburg (PCH) MS 0x8d7d 32 hard yes yes yes - Wellsburg (PCH) MS 0x8d7e 32 hard yes yes yes - Wellsburg (PCH) MS 0x8d7f 32 hard yes yes yes - Coleto Creek (PCH) 0x23b0 32 hard yes yes yes - Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes - BayTrail (SOC) 0x0f12 32 hard yes yes yes - - Features supported by this driver: - Software PEC no - Hardware PEC yes - Block buffer yes - Block process call transaction no - I2C block read transaction yes (doesn't use the block buffer) - Slave mode no - Interrupt processing yes - - See the file Documentation/i2c/busses/i2c-i801 for details. -*/ + * Supports the following Intel I/O Controller Hubs (ICH): + * + * I/O Block I2C + * region SMBus Block proc. block + * Chip name PCI ID size PEC buffer call read + * --------------------------------------------------------------------------- + * 82801AA (ICH) 0x2413 16 no no no no + * 82801AB (ICH0) 0x2423 16 no no no no + * 82801BA (ICH2) 0x2443 16 no no no no + * 82801CA (ICH3) 0x2483 32 soft no no no + * 82801DB (ICH4) 0x24c3 32 hard yes no no + * 82801E (ICH5) 0x24d3 32 hard yes yes yes + * 6300ESB 0x25a4 32 hard yes yes yes + * 82801F (ICH6) 0x266a 32 hard yes yes yes + * 6310ESB/6320ESB 0x269b 32 hard yes yes yes + * 82801G (ICH7) 0x27da 32 hard yes yes yes + * 82801H (ICH8) 0x283e 32 hard yes yes yes + * 82801I (ICH9) 0x2930 32 hard yes yes yes + * EP80579 (Tolapai) 0x5032 32 hard yes yes yes + * ICH10 0x3a30 32 hard yes yes yes + * ICH10 0x3a60 32 hard yes yes yes + * 5/3400 Series (PCH) 0x3b30 32 hard yes yes yes + * 6 Series (PCH) 0x1c22 32 hard yes yes yes + * Patsburg (PCH) 0x1d22 32 hard yes yes yes + * Patsburg (PCH) IDF 0x1d70 32 hard yes yes yes + * Patsburg (PCH) IDF 0x1d71 32 hard yes yes yes + * Patsburg (PCH) IDF 0x1d72 32 hard yes yes yes + * DH89xxCC (PCH) 0x2330 32 hard yes yes yes + * Panther Point (PCH) 0x1e22 32 hard yes yes yes + * Lynx Point (PCH) 0x8c22 32 hard yes yes yes + * Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes + * Avoton (SOC) 0x1f3c 32 hard yes yes yes + * Wellsburg (PCH) 0x8d22 32 hard yes yes yes + * Wellsburg (PCH) MS 0x8d7d 32 hard yes yes yes + * Wellsburg (PCH) MS 0x8d7e 32 hard yes yes yes + * Wellsburg (PCH) MS 0x8d7f 32 hard yes yes yes + * Coleto Creek (PCH) 0x23b0 32 hard yes yes yes + * Wildcat Point (PCH) 0x8ca2 32 hard yes yes yes + * Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes + * BayTrail (SOC) 0x0f12 32 hard yes yes yes + * + * Features supported by this driver: + * Software PEC no + * Hardware PEC yes + * Block buffer yes + * Block process call transaction no + * I2C block read transaction yes (doesn't use the block buffer) + * Slave mode no + * Interrupt processing yes + * + * See the file Documentation/i2c/busses/i2c-i801 for details. + */ #include <linux/interrupt.h> #include <linux/module.h> @@ -162,24 +163,25 @@ STATUS_ERROR_FLAGS) /* Older devices have their ID defined in <linux/pci_ids.h> */ -#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12 -#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22 -#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22 +#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12 +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22 +#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22 /* Patsburg also has three 'Integrated Device Function' SMBus controllers */ -#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 0x1d70 -#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 0x1d71 -#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72 -#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22 -#define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS 0x1f3c -#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330 -#define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS 0x23b0 -#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30 -#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22 -#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS 0x8d22 -#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0 0x8d7d -#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1 0x8d7e -#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2 0x8d7f -#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22 +#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 0x1d70 +#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 0x1d71 +#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22 +#define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS 0x1f3c +#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330 +#define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS 0x23b0 +#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30 +#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22 +#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS 0x8ca2 +#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS 0x8d22 +#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0 0x8d7d +#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1 0x8d7e +#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2 0x8d7f +#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2 struct i801_mux_config { @@ -823,6 +825,7 @@ static const struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) }, { 0, } diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index aa8bc146718b..613069bc561a 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -735,10 +735,7 @@ static int i2c_imx_probe(struct platform_device *pdev) clk_disable_unprepare(i2c_imx->clk); dev_dbg(&i2c_imx->adapter.dev, "claimed irq %d\n", irq); - dev_dbg(&i2c_imx->adapter.dev, "device resources from 0x%x to 0x%x\n", - res->start, res->end); - dev_dbg(&i2c_imx->adapter.dev, "allocated %d bytes at 0x%x\n", - resource_size(res), res->start); + dev_dbg(&i2c_imx->adapter.dev, "device resources: %pR\n", res); dev_dbg(&i2c_imx->adapter.dev, "adapter name: \"%s\"\n", i2c_imx->adapter.name); dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n"); diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index 6a32aa095f83..0edf630b099a 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -341,8 +341,7 @@ static u32 mpc_i2c_get_sec_cfg_8xxx(void) iounmap(reg); } } - if (node) - of_node_put(node); + of_node_put(node); return val; } diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 9f4b775e2e39..6dc5ded86f62 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -863,7 +863,7 @@ mv64xxx_i2c_probe(struct platform_device *pd) drv_data->adapter.dev.parent = &pd->dev; drv_data->adapter.algo = &mv64xxx_i2c_algo; drv_data->adapter.owner = THIS_MODULE; - drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD | I2C_CLASS_DEPRECATED; + drv_data->adapter.class = I2C_CLASS_DEPRECATED; drv_data->adapter.nr = pd->id; drv_data->adapter.dev.of_node = pd->dev.of_node; platform_set_drvdata(pd, drv_data); diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index 0e55d85fd4ed..9ad038d223c4 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -1032,10 +1032,10 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id) adap = &dev->adap; adap->dev.of_node = np; adap->dev.parent = &adev->dev; - adap->owner = THIS_MODULE; - adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD | I2C_CLASS_DEPRECATED; - adap->algo = &nmk_i2c_algo; - adap->timeout = msecs_to_jiffies(dev->timeout); + adap->owner = THIS_MODULE; + adap->class = I2C_CLASS_DEPRECATED; + adap->algo = &nmk_i2c_algo; + adap->timeout = msecs_to_jiffies(dev->timeout); snprintf(adap->name, sizeof(adap->name), "Nomadik I2C at %pR", &adev->res); diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index 0e10cc6182f0..2a4fe0b7cfb7 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -239,15 +239,15 @@ static u32 ocores_func(struct i2c_adapter *adap) } static const struct i2c_algorithm ocores_algorithm = { - .master_xfer = ocores_xfer, - .functionality = ocores_func, + .master_xfer = ocores_xfer, + .functionality = ocores_func, }; static struct i2c_adapter ocores_adapter = { - .owner = THIS_MODULE, - .name = "i2c-ocores", - .class = I2C_CLASS_HWMON | I2C_CLASS_SPD | I2C_CLASS_DEPRECATED, - .algo = &ocores_algorithm, + .owner = THIS_MODULE, + .name = "i2c-ocores", + .class = I2C_CLASS_DEPRECATED, + .algo = &ocores_algorithm, }; static const struct of_device_id ocores_i2c_match[] = { diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index b182793a4051..0dffb0e62c3b 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1236,7 +1236,7 @@ omap_i2c_probe(struct platform_device *pdev) adap = &dev->adapter; i2c_set_adapdata(adap, dev); adap->owner = THIS_MODULE; - adap->class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED; + adap->class = I2C_CLASS_DEPRECATED; strlcpy(adap->name, "OMAP I2C adapter", sizeof(adap->name)); adap->algo = &omap_i2c_algo; adap->dev.parent = &pdev->dev; diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c index 2a5efb5b487c..3a4d64e1dfb1 100644 --- a/drivers/i2c/busses/i2c-qup.c +++ b/drivers/i2c/busses/i2c-qup.c @@ -633,13 +633,17 @@ static int qup_i2c_probe(struct platform_device *pdev) * associated with each byte written/received */ size = QUP_OUTPUT_BLOCK_SIZE(io_mode); - if (size >= ARRAY_SIZE(blk_sizes)) - return -EIO; + if (size >= ARRAY_SIZE(blk_sizes)) { + ret = -EIO; + goto |