20 files changed, 1452 insertions, 667 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index d1fc5cf9aa4d..a3afac4be734 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -110,7 +110,6 @@ config I2C_I801
 config I2C_ISCH
 	tristate "Intel SCH SMBus 1.0"
 	depends on PCI
-	select MFD_CORE
 	select LPC_SCH
 	help
 	  Say Y here if you want to use SMBus controller on the Intel SCH
@@ -301,7 +300,7 @@ config I2C_AT91
 
 config I2C_AU1550
 	tristate "Au1550/Au1200 SMBus interface"
-	depends on SOC_AU1550 || SOC_AU1200
+	depends on MIPS_ALCHEMY
 	help
 	  If you say yes to this option, support will be included for the
 	  Au1550 and Au1200 SMBus interface.
@@ -350,15 +349,25 @@ config I2C_DAVINCI
 	  devices such as DaVinci NIC.
 	  For details please see http://www.ti.com/davinci
 
-config I2C_DESIGNWARE
-	tristate "Synopsys DesignWare"
+config I2C_DESIGNWARE_PLATFORM
+	tristate "Synopsys DesignWare Platfrom"
 	depends on HAVE_CLK
 	help
 	  If you say yes to this option, support will be included for the
 	  Synopsys DesignWare I2C adapter. Only master mode is supported.
 
 	  This driver can also be built as a module.  If so, the module
-	  will be called i2c-designware.
+	  will be called i2c-designware-platform.
+
+config I2C_DESIGNWARE_PCI
+	tristate "Synopsys DesignWare PCI"
+	depends on PCI
+	help
+	  If you say yes to this option, support will be included for the
+	  Synopsys DesignWare I2C adapter. Only master mode is supported.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-designware-pci.
 
 config I2C_GPIO
 	tristate "GPIO-based bitbanging I2C"
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index e6cf294d3729..fba6da60aa0e 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -33,7 +33,10 @@ obj-$(CONFIG_I2C_AU1550)	+= i2c-au1550.o
 obj-$(CONFIG_I2C_BLACKFIN_TWI)	+= i2c-bfin-twi.o
 obj-$(CONFIG_I2C_CPM)		+= i2c-cpm.o
 obj-$(CONFIG_I2C_DAVINCI)	+= i2c-davinci.o
-obj-$(CONFIG_I2C_DESIGNWARE)	+= i2c-designware.o
+obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM)	+= i2c-designware-platform.o
+i2c-designware-platform-objs := i2c-designware-platdrv.o i2c-designware-core.o
+obj-$(CONFIG_I2C_DESIGNWARE_PCI)	+= i2c-designware-pci.o
+i2c-designware-pci-objs := i2c-designware-pcidrv.o i2c-designware-core.o
 obj-$(CONFIG_I2C_GPIO)		+= i2c-gpio.o
 obj-$(CONFIG_I2C_HIGHLANDER)	+= i2c-highlander.o
 obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o
diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index 532828bc50e6..f314d7f433d3 100644
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -36,32 +36,44 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 
-#include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_psc.h>
 
+#define PSC_SEL		0x00
+#define PSC_CTRL	0x04
+#define PSC_SMBCFG	0x08
+#define PSC_SMBMSK	0x0C
+#define PSC_SMBPCR	0x10
+#define PSC_SMBSTAT	0x14
+#define PSC_SMBEVNT	0x18
+#define PSC_SMBTXRX	0x1C
+#define PSC_SMBTMR	0x20
+
 struct i2c_au1550_data {
-	u32	psc_base;
+	void __iomem *psc_base;
 	int	xfer_timeout;
-	int	ack_timeout;
 	struct i2c_adapter adap;
 	struct resource *ioarea;
 };
 
-static int
-wait_xfer_done(struct i2c_au1550_data *adap)
+static inline void WR(struct i2c_au1550_data *a, int r, unsigned long v)
 {
-	u32	stat;
-	int	i;
-	volatile psc_smb_t	*sp;
+	__raw_writel(v, a->psc_base + r);
+	wmb();
+}
 
-	sp = (volatile psc_smb_t *)(adap->psc_base);
+static inline unsigned long RD(struct i2c_au1550_data *a, int r)
+{
+	return __raw_readl(a->psc_base + r);
+}
 
-	/* Wait for Tx Buffer Empty
-	*/
+static int wait_xfer_done(struct i2c_au1550_data *adap)
+{
+	int i;
+
+	/* Wait for Tx Buffer Empty */
 	for (i = 0; i < adap->xfer_timeout; i++) {
-		stat = sp->psc_smbstat;
-		au_sync();
-		if ((stat & PSC_SMBSTAT_TE) != 0)
+		if (RD(adap, PSC_SMBSTAT) & PSC_SMBSTAT_TE)
 			return 0;
 
 		udelay(1);
@@ -70,41 +82,27 @@ wait_xfer_done(struct i2c_au1550_data *adap)
 	return -ETIMEDOUT;
 }
 
-static int
-wait_ack(struct i2c_au1550_data *adap)
+static int wait_ack(struct i2c_au1550_data *adap)
 {
-	u32	stat;
-	volatile psc_smb_t	*sp;
+	unsigned long stat;
 
 	if (wait_xfer_done(adap))
 		return -ETIMEDOUT;
 
-	sp = (volatile psc_smb_t *)(adap->psc_base);
-
-	stat = sp->psc_smbevnt;
-	au_sync();
-
+	stat = RD(adap, PSC_SMBEVNT);
 	if ((stat & (PSC_SMBEVNT_DN | PSC_SMBEVNT_AN | PSC_SMBEVNT_AL)) != 0)
 		return -ETIMEDOUT;
 
 	return 0;
 }
 
-static int
-wait_master_done(struct i2c_au1550_data *adap)
+static int wait_master_done(struct i2c_au1550_data *adap)
 {
-	u32	stat;
-	int	i;
-	volatile psc_smb_t	*sp;
+	int i;
 
-	sp = (volatile psc_smb_t *)(adap->psc_base);
-
-	/* Wait for Master Done.
-	*/
-	for (i = 0; i < adap->xfer_timeout; i++) {
-		stat = sp->psc_smbevnt;
-		au_sync();
-		if ((stat & PSC_SMBEVNT_MD) != 0)
+	/* Wait for Master Done. */
+	for (i = 0; i < 2 * adap->xfer_timeout; i++) {
+		if ((RD(adap, PSC_SMBEVNT) & PSC_SMBEVNT_MD) != 0)
 			return 0;
 		udelay(1);
 	}
@@ -115,29 +113,20 @@ wait_master_done(struct i2c_au1550_data *adap)
 static int
 do_address(struct i2c_au1550_data *adap, unsigned int addr, int rd, int q)
 {
-	volatile psc_smb_t	*sp;
-	u32			stat;
+	unsigned long stat;
 
-	sp = (volatile psc_smb_t *)(adap->psc_base);
-
-	/* Reset the FIFOs, clear events.
-	*/
-	stat = sp->psc_smbstat;
-	sp->psc_smbevnt = PSC_SMBEVNT_ALLCLR;
-	au_sync();
+	/* Reset the FIFOs, clear events. */
+	stat = RD(adap, PSC_SMBSTAT);
+	WR(adap, PSC_SMBEVNT, PSC_SMBEVNT_ALLCLR);
 
 	if (!(stat & PSC_SMBSTAT_TE) || !(stat & PSC_SMBSTAT_RE)) {
-		sp->psc_smbpcr = PSC_SMBPCR_DC;
-		au_sync();
-		do {
-			stat = sp->psc_smbpcr;
-			au_sync();
-		} while ((stat & PSC_SMBPCR_DC) != 0);
+		WR(adap, PSC_SMBPCR, PSC_SMBPCR_DC);
+		while ((RD(adap, PSC_SMBPCR) & PSC_SMBPCR_DC) != 0)
+			cpu_relax();
 		udelay(50);
 	}
 
-	/* Write out the i2c chip address and specify operation
-	*/
+	/* Write out the i2c chip address and specify operation */
 	addr <<= 1;
 	if (rd)
 		addr |= 1;
@@ -146,56 +135,42 @@ do_address(struct i2c_au1550_data *adap, unsigned int addr, int rd, int q)
 	if (q)
 		addr |= PSC_SMBTXRX_STP;
 
-	/* Put byte into fifo, start up master.
-	*/
-	sp->psc_smbtxrx = addr;
-	au_sync();
-	sp->psc_smbpcr = PSC_SMBPCR_MS;
-	au_sync();
+	/* Put byte into fifo, start up master. */
+	WR(adap, PSC_SMBTXRX, addr);
+	WR(adap, PSC_SMBPCR, PSC_SMBPCR_MS);
 	if (wait_ack(adap))
 		return -EIO;
 	return (q) ? wait_master_done(adap) : 0;
 }
 
-static u32
-wait_for_rx_byte(struct i2c_au1550_data *adap, u32 *ret_data)
+static int wait_for_rx_byte(struct i2c_au1550_data *adap, unsigned char *out)
 {
-	int	j;
-	u32	data, stat;
-	volatile psc_smb_t	*sp;
+	int j;
 
 	if (wait_xfer_done(adap))
 		return -EIO;
 
-	sp = (volatile psc_smb_t *)(adap->psc_base);
-
 	j =  adap->xfer_timeout * 100;
 	do {
 		j--;
 		if (j <= 0)
 			return -EIO;
 
-		stat = sp->psc_smbstat;
-		au_sync();
-		if ((stat & PSC_SMBSTAT_RE) == 0)
+		if ((RD(adap, PSC_SMBSTAT) & PSC_SMBSTAT_RE) == 0)
 			j = 0;
 		else
 			udelay(1);
 	} while (j > 0);
-	data = sp->psc_smbtxrx;
-	au_sync();
-	*ret_data = data;
+
+	*out = RD(adap, PSC_SMBTXRX);
 
 	return 0;
 }
 
-static int
-i2c_read(struct i2c_au1550_data *adap, unsigned char *buf,
+static int i2c_read(struct i2c_au1550_data *adap, unsigned char *buf,
 		    unsigned int len)
 {
-	int	i;
-	u32	data;
-	volatile psc_smb_t	*sp;
+	int i;
 
 	if (len == 0)
 		return 0;
@@ -204,62 +179,46 @@ i2c_read(struct i2c_au1550_data *adap, unsigned char *buf,
 	 * zero bytes for timing, waiting for bytes to appear in the
 	 * receive fifo, then reading the bytes.
 	 */
-
-	sp = (volatile psc_smb_t *)(adap->psc_base);
-
 	i = 0;
-	while (i < (len-1)) {
-		sp->psc_smbtxrx = 0;
-		au_sync();
-		if (wait_for_rx_byte(adap, &data))
+	while (i < (len - 1)) {
+		WR(adap, PSC_SMBTXRX, 0);
+		if (wait_for_rx_byte(adap, &buf[i]))
 			return -EIO;
 
-		buf[i] = data;
 		i++;
 	}
 
-	/* The last byte has to indicate transfer done.
-	*/
-	sp->psc_smbtxrx = PSC_SMBTXRX_STP;
-	au_sync();
+	/* The last byte has to indicate transfer done. */
+	WR(adap, PSC_SMBTXRX, PSC_SMBTXRX_STP);
 	if (wait_master_done(adap))
 		return -EIO;
 
-	data = sp->psc_smbtxrx;
-	au_sync();
-	buf[i] = data;
+	buf[i] = (unsigned char)(RD(adap, PSC_SMBTXRX) & 0xff);
 	return 0;
 }
 
-static int
-i2c_write(struct i2c_au1550_data *adap, unsigned char *buf,
+static int i2c_write(struct i2c_au1550_data *adap, unsigned char *buf,
 		     unsigned int len)
 {
-	int	i;
-	u32	data;
-	volatile psc_smb_t	*sp;
+	int i;
+	unsigned long data;
 
 	if (len == 0)
 		return 0;
 
-	sp = (volatile psc_smb_t *)(adap->psc_base);
-
 	i = 0;
 	while (i < (len-1)) {
 		data = buf[i];
-		sp->psc_smbtxrx = data;
-		au_sync();
+		WR(adap, PSC_SMBTXRX, data);
 		if (wait_ack(adap))
 			return -EIO;
 		i++;
 	}
 
-	/* The last byte has to indicate transfer done.
-	*/
+	/* The last byte has to indicate transfer done. */
 	data = buf[i];
 	data |= PSC_SMBTXRX_STP;
-	sp->psc_smbtxrx = data;
-	au_sync();
+	WR(adap, PSC_SMBTXRX, data);
 	if (wait_master_done(adap))
 		return -EIO;
 	return 0;
@@ -269,12 +228,10 @@ static int
 au1550_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
 {
 	struct i2c_au1550_data *adap = i2c_adap->algo_data;
-	volatile psc_smb_t *sp = (volatile psc_smb_t *)adap->psc_base;
 	struct i2c_msg *p;
 	int i, err = 0;
 
-	sp->psc_ctrl = PSC_CTRL_ENABLE;
-	au_sync();
+	WR(adap, PSC_CTRL, PSC_CTRL_ENABLE);
 
 	for (i = 0; !err && i < num; i++) {
 		p = &msgs[i];
@@ -293,14 +250,12 @@ au1550_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
 	if (err == 0)
 		err = num;
 
-	sp->psc_ctrl = PSC_CTRL_SUSPEND;
-	au_sync();
+	WR(adap, PSC_CTRL, PSC_CTRL_SUSPEND);
 
 	return err;
 }
 
-static u32
-au1550_func(struct i2c_adapter *adap)
+static u32 au1550_func(struct i2c_adapter *adap)
 {
 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
 }
@@ -312,57 +267,45 @@ static const struct i2c_algorithm au1550_algo = {
 
 static void i2c_au1550_setup(struct i2c_au1550_data *priv)
 {
-	volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base;
-	u32 stat;
-
-	sp->psc_ctrl = PSC_CTRL_DISABLE;
-	au_sync();
-	sp->psc_sel = PSC_SEL_PS_SMBUSMODE;
-	sp->psc_smbcfg = 0;
-	au_sync();
-	sp->psc_ctrl = PSC_CTRL_ENABLE;
-	au_sync();
-	do {
-		stat = sp->psc_smbstat;
-		au_sync();
-	} while ((stat & PSC_SMBSTAT_SR) == 0);
+	unsigned long cfg;
 
-	sp->psc_smbcfg = (PSC_SMBCFG_RT_FIFO8 | PSC_SMBCFG_TT_FIFO8 |
-				PSC_SMBCFG_DD_DISABLE);
+	WR(priv, PSC_CTRL, PSC_CTRL_DISABLE);
+	WR(priv, PSC_SEL, PSC_SEL_PS_SMBUSMODE);
+	WR(priv, PSC_SMBCFG, 0);
+	WR(priv, PSC_CTRL, PSC_CTRL_ENABLE);
+	while ((RD(priv, PSC_SMBSTAT) & PSC_SMBSTAT_SR) == 0)
+		cpu_relax();
+
+	cfg = PSC_SMBCFG_RT_FIFO8 | PSC_SMBCFG_TT_FIFO8 | PSC_SMBCFG_DD_DISABLE;
+	WR(priv, PSC_SMBCFG, cfg);
 
 	/* Divide by 8 to get a 6.25 MHz clock.  The later protocol
 	 * timings are based on this clock.
 	 */
-	sp->psc_smbcfg |= PSC_SMBCFG_SET_DIV(PSC_SMBCFG_DIV8);
-	sp->psc_smbmsk = PSC_SMBMSK_ALLMASK;
-	au_sync();
+	cfg |= PSC_SMBCFG_SET_DIV(PSC_SMBCFG_DIV8);
+	WR(priv, PSC_SMBCFG, cfg);
+	WR(priv, PSC_SMBMSK, PSC_SMBMSK_ALLMASK);
 
 	/* Set the protocol timer values.  See Table 71 in the
 	 * Au1550 Data Book for standard timing values.
 	 */
-	sp->psc_smbtmr = PSC_SMBTMR_SET_TH(0) | PSC_SMBTMR_SET_PS(15) | \
+	WR(priv, PSC_SMBTMR, PSC_SMBTMR_SET_TH(0) | PSC_SMBTMR_SET_PS(15) | \
 		PSC_SMBTMR_SET_PU(15) | PSC_SMBTMR_SET_SH(15) | \
 		PSC_SMBTMR_SET_SU(15) | PSC_SMBTMR_SET_CL(15) | \
-		PSC_SMBTMR_SET_CH(15);
-	au_sync();
+		PSC_SMBTMR_SET_CH(15));
 
-	sp->psc_smbcfg |= PSC_SMBCFG_DE_ENABLE;
-	do {
-		stat = sp->psc_smbstat;
-		au_sync();
-	} while ((stat & PSC_SMBSTAT_SR) == 0);
+	cfg |= PSC_SMBCFG_DE_ENABLE;
+	WR(priv, PSC_SMBCFG, cfg);
+	while ((RD(priv, PSC_SMBSTAT) & PSC_SMBSTAT_SR) == 0)
+		cpu_relax();
 
-	sp->psc_ctrl = PSC_CTRL_SUSPEND;
-	au_sync();
+	WR(priv, PSC_CTRL, PSC_CTRL_SUSPEND);
 }
 
 static void i2c_au1550_disable(struct i2c_au1550_data *priv)
 {
-	volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base;
-
-	sp->psc_smbcfg = 0;
-	sp->psc_ctrl = PSC_CTRL_DISABLE;
-	au_sync();
+	WR(priv, PSC_SMBCFG, 0);
+	WR(priv, PSC_CTRL, PSC_CTRL_DISABLE);
 }
 
 /*
@@ -396,9 +339,12 @@ i2c_au1550_probe(struct platform_device *pdev)
 		goto out_mem;
 	}
 
-	priv->psc_base = CKSEG1ADDR(r->start);
+	priv->psc_base = ioremap(r->start, resource_size(r));
+	if (!priv->psc_base) {
+		ret = -EIO;
+		goto out_map;
+	}
 	priv->xfer_timeout = 200;
-	priv->ack_timeout = 200;
 
 	priv->adap.nr = pdev->id;
 	priv->adap.algo = &au1550_algo;
@@ -406,8 +352,7 @@ i2c_au1550_probe(struct platform_device *pdev)
 	priv->adap.dev.parent = &pdev->dev;
 	strlcpy(priv->adap.name, "Au1xxx PSC I2C", sizeof(priv->adap.name));
 
-	/* Now, set up the PSC for SMBus PIO mode.
-	*/
+	/* Now, set up the PSC for SMBus PIO mode. */
 	i2c_au1550_setup(priv);
 
 	ret = i2c_add_numbered_adapter(&priv->adap);
@@ -417,7 +362,8 @@ i2c_au1550_probe(struct platform_device *pdev)
 	}
 
 	i2c_au1550_disable(priv);
-
+	iounmap(priv->psc_base);
+out_map:
 	release_resource(priv->ioarea);
 	kfree(priv->ioarea);
 out_mem:
@@ -426,14 +372,14 @@ out:
 	return ret;
 }
 
-static int __devexit
-i2c_au1550_remove(struct platform_device *pdev)
+static int __devexit i2c_au1550_remove(struct platform_device *pdev)
 {
 	struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
 
 	platform_set_drvdata(pdev, NULL);
 	i2c_del_adapter(&priv->adap);
 	i2c_au1550_disable(priv);
+	iounmap(priv->psc_base);
 	release_resource(priv->ioarea);
 	kfree(priv->ioarea);
 	kfree(priv);
@@ -441,49 +387,51 @@ i2c_au1550_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM
-static int
-i2c_au1550_suspend(struct platform_device *pdev, pm_message_t state)
+static int i2c_au1550_suspend(struct device *dev)
 {
-	struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
+	struct i2c_au1550_data *priv = dev_get_drvdata(dev);
 
 	i2c_au1550_disable(priv);
 
 	return 0;
 }
 
-static int
-i2c_au1550_resume(struct platform_device *pdev)
+static int i2c_au1550_resume(struct device *dev)
 {
-	struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
+	struct i2c_au1550_data *priv = dev_get_drvdata(dev);
 
 	i2c_au1550_setup(priv);
 
 	return 0;
 }
+
+static const struct dev_pm_ops i2c_au1550_pmops = {
+	.suspend	= i2c_au1550_suspend,
+	.resume		= i2c_au1550_resume,
+};
+
+#define AU1XPSC_SMBUS_PMOPS (&i2c_au1550_pmops)
+
 #else
-#define i2c_au1550_suspend	NULL
-#define i2c_au1550_resume	NULL
+#define AU1XPSC_SMBUS_PMOPS NULL
 #endif
 
 static struct platform_driver au1xpsc_smbus_driver = {
 	.driver = {
 		.name	= "au1xpsc_smbus",
 		.owner	= THIS_MODULE,
+		.pm	= AU1XPSC_SMBUS_PMOPS,
 	},
 	.probe		= i2c_au1550_probe,
 	.remove		= __devexit_p(i2c_au1550_remove),
-	.suspend	= i2c_au1550_suspend,
-	.resume		= i2c_au1550_resume,
 };
 
-static int __init
-i2c_au1550_init(void)
+static int __init i2c_au1550_init(void)
 {
 	return platform_driver_register(&au1xpsc_smbus_driver);
 }
 
-static void __exit
-i2c_au1550_exit(void)
+static void __exit i2c_au1550_exit(void)
 {
 	platform_driver_unregister(&au1xpsc_smbus_driver);
 }
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index cbc98aea5b09..cdb59e5b23f7 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -631,7 +631,7 @@ static int i2c_bfin_twi_resume(struct platform_device *pdev)
 	struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
 
 	int rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
-		IRQF_DISABLED, pdev->name, iface);
+		0, pdev->name, iface);
 	if (rc) {
 		dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq);
 		return -ENODEV;
@@ -702,7 +702,7 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
 	}
 
 	rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
-		IRQF_DISABLED, pdev->name, iface);
+		0, pdev->name, iface);
 	if (rc) {
 		dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq);
 		rc = -ENODEV;
diff --git a/drivers/i2c/busses/i2c-designware.c b/drivers/i2c/busses/i2c-designware-core.c
index 1b42b50b5992..df8799241009 100644
--- a/drivers/i2c/busses/i2c-designware.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -25,18 +25,15 @@
  * ----------------------------------------------------------------------------
  *
  */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
 #include <linux/clk.h>
 #include <linux/errno.h>
-#include <linux/sched.h>
 #include <linux/err.h>
+#include <linux/i2c.h>
 #include <linux/interrupt.h>
-#include <linux/platform_device.h>
 #include <linux/io.h>
-#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+#include <linux/delay.h>
+#include "i2c-designware-core.h"
 
 /*
  * Registers offset
@@ -68,15 +65,10 @@
 #define DW_IC_STATUS		0x70
 #define DW_IC_TXFLR		0x74
 #define DW_IC_RXFLR		0x78
-#define DW_IC_COMP_PARAM_1	0xf4
 #define DW_IC_TX_ABRT_SOURCE	0x80
-
-#define DW_IC_CON_MASTER		0x1
-#define DW_IC_CON_SPEED_STD		0x2
-#define DW_IC_CON_SPEED_FAST		0x4
-#define DW_IC_CON_10BITADDR_MASTER	0x10
-#define DW_IC_CON_RESTART_EN		0x20
-#define DW_IC_CON_SLAVE_DISABLE		0x40
+#define DW_IC_COMP_PARAM_1	0xf4
+#define DW_IC_COMP_TYPE		0xfc
+#define DW_IC_COMP_TYPE_VALUE	0x44570140
 
 #define DW_IC_INTR_RX_UNDER	0x001
 #define DW_IC_INTR_RX_OVER	0x002
@@ -170,55 +162,23 @@ static char *abort_sources[] = {
 		"lost arbitration",
 };
 
-/**
- * struct dw_i2c_dev - private i2c-designware data
- * @dev: driver model device node
- * @base: IO registers pointer
- * @cmd_complete: tx completion indicator
- * @lock: protect this struct and IO registers
- * @clk: input reference clock
- * @cmd_err: run time hadware error code
- * @msgs: points to an array of messages currently being transferred
- * @msgs_num: the number of elements in msgs
- * @msg_write_idx: the element index of the current tx message in the msgs
- *	array
- * @tx_buf_len: the length of the current tx buffer
- * @tx_buf: the current tx buffer
- * @msg_read_idx: the element index of the current rx message in the msgs
- *	array
- * @rx_buf_len: the length of the current rx buffer
- * @rx_buf: the current rx buffer
- * @msg_err: error status of the current transfer
- * @status: i2c master status, one of STATUS_*
- * @abort_source: copy of the TX_ABRT_SOURCE register
- * @irq: interrupt number for the i2c master
- * @adapter: i2c subsystem adapter node
- * @tx_fifo_depth: depth of the hardware tx fifo
- * @rx_fifo_depth: depth of the hardware rx fifo
- */
-struct dw_i2c_dev {
-	struct device		*dev;
-	void __iomem		*base;
-	struct completion	cmd_complete;
-	struct mutex		lock;
-	struct clk		*clk;
-	int			cmd_err;
-	struct i2c_msg		*msgs;
-	int			msgs_num;
-	int			msg_write_idx;
-	u32			tx_buf_len;
-	u8			*tx_buf;
-	int			msg_read_idx;
-	u32			rx_buf_len;
-	u8			*rx_buf;
-	int			msg_err;
-	unsigned int		status;
-	u32			abort_source;
-	int			irq;
-	struct i2c_adapter	adapter;
-	unsigned int		tx_fifo_depth;
-	unsigned int		rx_fifo_depth;
-};
+u32 dw_readl(struct dw_i2c_dev *dev, int offset)
+{
+	u32 value = readl(dev->base + offset);
+
+	if (dev->swab)
+		return swab32(value);
+	else
+		return value;
+}
+
+void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset)
+{
+	if (dev->swab)
+		b = swab32(b);
+
+	writel(b, dev->base + offset);
+}
 
 static u32
 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
@@ -283,13 +243,29 @@ static u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
  * This function is called during I2C init function, and in case of timeout at
  * run time.
  */
-static void i2c_dw_init(struct dw_i2c_dev *dev)
+int i2c_dw_init(struct dw_i2c_dev *dev)
 {
-	u32 input_clock_khz = clk_get_rate(dev->clk) / 1000;
-	u32 ic_con, hcnt, lcnt;
+	u32 input_clock_khz;
+	u32 hcnt, lcnt;
+	u32 reg;
+
+	input_clock_khz = dev->get_clk_rate_khz(dev);
+
+	/* Configure register endianess access */
+	reg = dw_readl(dev, DW_IC_COMP_TYPE);
+	if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
+		dev->swab = 1;
+		reg = DW_IC_COMP_TYPE_VALUE;
+	}
+
+	if (reg != DW_IC_COMP_TYPE_VALUE) {
+		dev_err(dev->dev, "Unknown Synopsys component type: "
+			"0x%08x\n", reg);
+		return -ENODEV;
+	}
 
 	/* Disable the adapter */
-	writel(0, dev->base + DW_IC_ENABLE);
+	dw_writel(dev, 0, DW_IC_ENABLE);
 
 	/* set standard and fast speed deviders for high/low periods */
 
@@ -303,8 +279,8 @@ static void i2c_dw_init(struct dw_i2c_dev *dev)
 				47,	/* tLOW = 4.7 us */
 				3,	/* tf = 0.3 us */
 				0);	/* No offset */
-	writel(hcnt, dev->base + DW_IC_SS_SCL_HCNT);
-	writel(lcnt, dev->base + DW_IC_SS_SCL_LCNT);
+	dw_writel(dev, hcnt, DW_IC_SS_SCL_HCNT);
+	dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT);
 	dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
 
 	/* Fast-mode */
@@ -317,18 +293,17 @@ static void i2c_dw_init(struct dw_i2c_dev *dev)
 				13,	/* tLOW = 1.3 us */
 				3,	/* tf = 0.3 us */
 				0);	/* No offset */
-	writel(hcnt, dev->base + DW_IC_FS_SCL_HCNT);
-	writel(lcnt, dev->base + DW_IC_FS_SCL_LCNT);
+	dw_writel(dev, hcnt, DW_IC_FS_SCL_HCNT);
+	dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT);
 	dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
 
 	/* Configure Tx/Rx FIFO threshold levels */
-	writel(dev->tx_fifo_depth - 1, dev->base + DW_IC_TX_TL);
-	writel(0, dev->base + DW_IC_RX_TL);
+	dw_writel(dev, dev->tx_fifo_depth - 1, DW_IC_TX_TL);
+	dw_writel(dev, 0, DW_IC_RX_TL);
 
 	/* configure the i2c master */
-	ic_con = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
-		DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
-	writel(ic_con, dev->base + DW_IC_CON);
+	dw_writel(dev, dev->master_cfg , DW_IC_CON);
+	return 0;
 }
 
 /*
@@ -338,7 +313,7 @@ static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
 {
 	int timeout = TIMEOUT;
 
-	while (readl(dev->base + DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
+	while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
 		if (timeout <= 0) {
 			dev_warn(dev->dev, "timeout waiting for bus ready\n");
 			return -ETIMEDOUT;
@@ -356,24 +331,24 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 	u32 ic_con;
 
 	/* Disable the adapter */
-	writel(0, dev->base + DW_IC_ENABLE);
+	dw_writel(dev, 0, DW_IC_ENABLE);
 
 	/* set the slave (target) address */
-	writel(msgs[dev->msg_write_idx].addr, dev->base + DW_IC_TAR);
+	dw_writel(dev, msgs[dev->msg_write_idx].addr, DW_IC_TAR);
 
 	/* if the slave address is ten bit address, enable 10BITADDR */
-	ic_con = readl(dev->base + DW_IC_CON);
+	ic_con = dw_readl(dev, DW_IC_CON);
 	if (msgs[dev->msg_write_idx].flags & I2C_M_TEN)
 		ic_con |= DW_IC_CON_10BITADDR_MASTER;
 	else
 		ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
-	writel(ic_con, dev->base + DW_IC_CON);
+	dw_writel(dev, ic_con, DW_IC_CON);
 
 	/* Enable the adapter */
-	writel(1, dev->base + DW_IC_ENABLE);
+	dw_writel(dev, 1, DW_IC_ENABLE);
 
 	/* Enable interrupts */
-	writel(DW_IC_INTR_DEFAULT_MASK, dev->base + DW_IC_INTR_MASK);
+	dw_writel(dev, DW_IC_INTR_DEFAULT_MASK, DW_IC_INTR_MASK);
 }
 
 /*
@@ -382,7 +357,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
  * messages into the tx buffer.  Even if the size of i2c_msg data is
  * longer than the size of the tx buffer, it handles everything.
  */
-static void
+void
 i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
 {
 	struct i2c_msg *msgs = dev->msgs;
@@ -420,15 +395,15 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
 			buf_len = msgs[dev->msg_write_idx].len;
 		}
 
-		tx_limit = dev->tx_fifo_depth - readl(dev->base + DW_IC_TXFLR);
-		rx_limit = dev->rx_fifo_depth - readl(dev->base + DW_IC_RXFLR);
+		tx_limit = dev->tx_fifo_depth - dw_readl(dev, DW_IC_TXFLR);
+		rx_limit = dev->rx_fifo_depth - dw_readl(dev, DW_IC_RXFLR);
 
 		while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) {
 			if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
-				writel(0x100, dev->base + DW_IC_DATA_CMD);
+				dw_writel(dev, 0x100, DW_IC_DATA_CMD);
 				rx_limit--;
 			} else
-				writel(*buf++, dev->base + DW_IC_DATA_CMD);
+				dw_writel(dev, *buf++, DW_IC_DATA_CMD);
 			tx_limit--; buf_len--;
 		}
 
@@ -453,7 +428,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
 	if (dev->msg_err)
 		intr_mask = 0;
 
-	writel(intr_mask, dev->base + DW_IC_INTR_MASK);
+	dw_writel(dev, intr_mask,  DW_IC_INTR_MASK);
 }
 
 static void
@@ -477,10 +452,10 @@ i2c_dw_read(struct dw_i2c_dev *dev)
 			buf = dev->rx_buf;
 		}
 
-		rx_valid = readl(dev->base + DW_IC_RXFLR);
+		rx_valid = dw_readl(dev, DW_IC_RXFLR);
 
 		for (; len > 0 && rx_valid > 0; len--, rx_valid--)
-			*buf++ = readl(dev->base + DW_IC_DATA_CMD);
+			*buf++ = dw_readl(dev, DW_IC_DATA_CMD);
 
 		if (len > 0) {
 			dev->status |= STATUS_READ_IN_PROGRESS;
@@ -518,7 +493,7 @@ static int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
 /*
  * Prepare controller for a transaction and call i2c_dw_xfer_msg
  */
-static int
+int
 i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 {
 	struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
@@ -527,6 +502,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num);
 
 	mutex_lock(&dev->lock);
+	pm_runtime_get_sync(dev->dev);
 
 	INIT_COMPLETION(dev->cmd_complete);
 	dev->msgs = msgs;
@@ -563,7 +539,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	/* no error */
 	if (likely(!dev->cmd_err)) {
 		/* Disable the adapter */
-		writel(0, dev->base + DW_IC_ENABLE);
+		dw_writel(dev, 0, DW_IC_ENABLE);
 		ret = num;
 		goto done;
 	}
@@ -576,19 +552,16 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	ret = -EIO;
 
 done:
+	pm_runtime_put(dev->dev);
 	mutex_unlock(&dev->lock);
 
 	return ret;
 }
 
-static u32 i2c_dw_func(struct i2c_adapter *adap)
+u32 i2c_dw_func(struct i2c_adapter *adap)
 {
-	return	I2C_FUNC_I2C |
-		I2C_FUNC_10BIT_ADDR |
-		I2C_FUNC_SMBUS_BYTE |
-		I2C_FUNC_SMBUS_BYTE_DATA |
-		I2C_FUNC_SMBUS_WORD_DATA |
-		I2C_FUNC_SMBUS_I2C_BLOCK;
+	struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
+	return dev->functionality;
 }
 
 static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
@@ -601,47 +574,47 @@ static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
 	 * in the IC_RAW_INTR_STAT register.
 	 *
 	 * That is,
-	 *   stat = readl(IC_INTR_STAT);
+	 *   stat = dw_readl(IC_INTR_STAT);
 	 * equals to,
-	 *   stat = readl(IC_RAW_INTR_STAT) & readl(IC_INTR_MASK);
+	 *   stat = dw_readl(IC_RAW_INTR_STAT) & dw_readl(IC_INTR_MASK);
 	 *
 	 * The raw version might be useful for debugging purposes.
 	 */
-	stat = readl(dev->base + DW_IC_INTR_STAT);
+	stat = dw_readl(dev, DW_IC_INTR_STAT);
 
 	/*
 	 * Do not use the IC_CLR_INTR register to clear interrupts, or
 	 * you'll miss some interrupts, triggered during the period from
-	 * readl(IC_INTR_STAT) to readl(IC_CLR_INTR).
+	 * dw_readl(IC_INTR_STAT) to dw_readl(IC_CLR_INTR).
 	 *
 	 * Instead, use the separately-prepared IC_CLR_* registers.
 	 */
 	if (stat & DW_IC_INTR_RX_UNDER)
-		readl(dev->base + DW_IC_CLR_RX_UNDER);
+		dw_readl(dev, DW_IC_CLR_RX_UNDER);
 	if (stat & DW_IC_INTR_RX_OVER)
-		readl(dev->base + DW_IC_CLR_RX_OVER);
+		dw_readl(dev, DW_IC_CLR_RX_OVER);
 	if (stat & DW_IC_INTR_TX_OVER)
-		readl(dev->base + DW_IC_CLR_TX_OVER);
+		dw_readl(dev, DW_IC_CLR_TX_OVER);
 	if (stat & DW_IC_INTR_RD_REQ)
-		readl(dev->base + DW_IC_CLR_RD_REQ);
+		dw_readl(dev, DW_IC_CLR_RD_REQ);
 	if (stat & DW_IC_INTR_TX_ABRT) {
 		/*
 		 * The IC_TX_ABRT_SOURCE register is cleared whenever
 		 * the IC_CLR_TX_ABRT is read.  Preserve it beforehand.
 		 */
-		dev->abort_source = readl(dev->base + DW_IC_TX_ABRT_SOURCE);