diff options
Diffstat (limited to 'drivers/i2c/busses')
-rw-r--r-- | drivers/i2c/busses/Kconfig | 4 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-at91-core.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-at91-master.c | 9 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-bcm-iproc.c | 15 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-designware-slave.c | 1 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-emev2.c | 16 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-i801.c | 17 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-imx.c | 18 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-mt65xx.c | 11 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-nvidia-gpu.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-piix4.c | 12 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-rcar.c | 11 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-s3c2410.c | 1 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-stm32.h | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-taos-evm.c | 2 |
15 files changed, 76 insertions, 47 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 09367fc014c3..a362245cc558 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -684,7 +684,7 @@ config I2C_IMX_LPI2C config I2C_IOP3XX tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface" - depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX + depends on ARCH_IOP32X || ARCH_IXP4XX help Say Y here if you want to use the IIC bus controller on the Intel IOPx3xx I/O Processors or IXP4xx Network Processors. @@ -1206,7 +1206,7 @@ config I2C_PARPORT and makes it easier to add support for new devices. An adapter type parameter is now mandatory. Please read the file - Documentation/i2c/busses/i2c-parport for details. + Documentation/i2c/busses/i2c-parport.rst for details. Another driver exists, named i2c-parport-light, which doesn't depend on the parport driver. This is meant for embedded systems. Don't say diff --git a/drivers/i2c/busses/i2c-at91-core.c b/drivers/i2c/busses/i2c-at91-core.c index 8d55cdd69ff4..435c7d7377a3 100644 --- a/drivers/i2c/busses/i2c-at91-core.c +++ b/drivers/i2c/busses/i2c-at91-core.c @@ -142,7 +142,7 @@ static struct at91_twi_pdata sama5d4_config = { static struct at91_twi_pdata sama5d2_config = { .clk_max_div = 7, - .clk_offset = 4, + .clk_offset = 3, .has_unre_flag = true, .has_alt_cmd = true, .has_hold_field = true, diff --git a/drivers/i2c/busses/i2c-at91-master.c b/drivers/i2c/busses/i2c-at91-master.c index e87232f2e708..a3fcc35ffd3b 100644 --- a/drivers/i2c/busses/i2c-at91-master.c +++ b/drivers/i2c/busses/i2c-at91-master.c @@ -122,9 +122,11 @@ static void at91_twi_write_next_byte(struct at91_twi_dev *dev) writeb_relaxed(*dev->buf, dev->base + AT91_TWI_THR); /* send stop when last byte has been written */ - if (--dev->buf_len == 0) + if (--dev->buf_len == 0) { if (!dev->use_alt_cmd) at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP); + at91_twi_write(dev, AT91_TWI_IDR, AT91_TWI_TXRDY); + } dev_dbg(dev->dev, "wrote 0x%x, to go %zu\n", *dev->buf, dev->buf_len); @@ -542,9 +544,8 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev) } else { at91_twi_write_next_byte(dev); at91_twi_write(dev, AT91_TWI_IER, - AT91_TWI_TXCOMP | - AT91_TWI_NACK | - AT91_TWI_TXRDY); + AT91_TWI_TXCOMP | AT91_TWI_NACK | + (dev->buf_len ? AT91_TWI_TXRDY : 0)); } } diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c index 2c7f145a036e..19ef2b0c682a 100644 --- a/drivers/i2c/busses/i2c-bcm-iproc.c +++ b/drivers/i2c/busses/i2c-bcm-iproc.c @@ -392,16 +392,18 @@ static bool bcm_iproc_i2c_slave_isr(struct bcm_iproc_i2c_dev *iproc_i2c, static void bcm_iproc_i2c_read_valid_bytes(struct bcm_iproc_i2c_dev *iproc_i2c) { struct i2c_msg *msg = iproc_i2c->msg; + uint32_t val; /* Read valid data from RX FIFO */ while (iproc_i2c->rx_bytes < msg->len) { - if (!((iproc_i2c_rd_reg(iproc_i2c, M_FIFO_CTRL_OFFSET) >> M_FIFO_RX_CNT_SHIFT) - & M_FIFO_RX_CNT_MASK)) + val = iproc_i2c_rd_reg(iproc_i2c, M_RX_OFFSET); + + /* rx fifo empty */ + if (!((val >> M_RX_STATUS_SHIFT) & M_RX_STATUS_MASK)) break; msg->buf[iproc_i2c->rx_bytes] = - (iproc_i2c_rd_reg(iproc_i2c, M_RX_OFFSET) >> - M_RX_DATA_SHIFT) & M_RX_DATA_MASK; + (val >> M_RX_DATA_SHIFT) & M_RX_DATA_MASK; iproc_i2c->rx_bytes++; } } @@ -788,7 +790,10 @@ static int bcm_iproc_i2c_xfer(struct i2c_adapter *adapter, static uint32_t bcm_iproc_i2c_functionality(struct i2c_adapter *adap) { - u32 val = I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; + u32 val; + + /* We do not support the SMBUS Quick command */ + val = I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK); if (adap->algo->reg_slave) val |= I2C_FUNC_SLAVE; diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c index e7f9305b2dd9..f5f001738df5 100644 --- a/drivers/i2c/busses/i2c-designware-slave.c +++ b/drivers/i2c/busses/i2c-designware-slave.c @@ -94,6 +94,7 @@ static int i2c_dw_unreg_slave(struct i2c_client *slave) dev->disable_int(dev); dev->disable(dev); + synchronize_irq(dev->irq); dev->slave = NULL; pm_runtime_put(dev->dev); diff --git a/drivers/i2c/busses/i2c-emev2.c b/drivers/i2c/busses/i2c-emev2.c index 35b302d983e0..959d4912ec0d 100644 --- a/drivers/i2c/busses/i2c-emev2.c +++ b/drivers/i2c/busses/i2c-emev2.c @@ -69,6 +69,7 @@ struct em_i2c_device { struct completion msg_done; struct clk *sclk; struct i2c_client *slave; + int irq; }; static inline void em_clear_set_bit(struct em_i2c_device *priv, u8 clear, u8 set, u8 reg) @@ -339,6 +340,12 @@ static int em_i2c_unreg_slave(struct i2c_client *slave) writeb(0, priv->base + I2C_OFS_SVA0); + /* + * Wait for interrupt to finish. New slave irqs cannot happen because we + * cleared the slave address and, thus, only extension codes will be + * detected which do not use the slave ptr. + */ + synchronize_irq(priv->irq); priv->slave = NULL; return 0; @@ -355,7 +362,7 @@ static int em_i2c_probe(struct platform_device *pdev) { struct em_i2c_device *priv; struct resource *r; - int irq, ret; + int ret; priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); if (!priv) @@ -390,8 +397,8 @@ static int em_i2c_probe(struct platform_device *pdev) em_i2c_reset(&priv->adap); - irq = platform_get_irq(pdev, 0); - ret = devm_request_irq(&pdev->dev, irq, em_i2c_irq_handler, 0, + priv->irq = platform_get_irq(pdev, 0); + ret = devm_request_irq(&pdev->dev, priv->irq, em_i2c_irq_handler, 0, "em_i2c", priv); if (ret) goto err_clk; @@ -401,7 +408,8 @@ static int em_i2c_probe(struct platform_device *pdev) if (ret) goto err_clk; - dev_info(&pdev->dev, "Added i2c controller %d, irq %d\n", priv->adap.nr, irq); + dev_info(&pdev->dev, "Added i2c controller %d, irq %d\n", priv->adap.nr, + priv->irq); return 0; diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index f2956936c3f2..36e9559f880c 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -77,7 +77,7 @@ * SMBus Host Notify yes * Interrupt processing yes * - * See the file Documentation/i2c/busses/i2c-i801 for details. + * See the file Documentation/i2c/busses/i2c-i801.rst for details. */ #include <linux/interrupt.h> @@ -1194,19 +1194,28 @@ static acpi_status check_acpi_smo88xx_device(acpi_handle obj_handle, int i; status = acpi_get_object_info(obj_handle, &info); - if (!ACPI_SUCCESS(status) || !(info->valid & ACPI_VALID_HID)) + if (ACPI_FAILURE(status)) return AE_OK; + if (!(info->valid & ACPI_VALID_HID)) + goto smo88xx_not_found; + hid = info->hardware_id.string; if (!hid) - return AE_OK; + goto smo88xx_not_found; i = match_string(acpi_smo8800_ids, ARRAY_SIZE(acpi_smo8800_ids), hid); if (i < 0) - return AE_OK; + goto smo88xx_not_found; + + kfree(info); *((bool *)return_value) = true; return AE_CTRL_TERMINATE; + +smo88xx_not_found: + kfree(info); + return AE_OK; } static bool is_dell_system_with_lis3lv02d(void) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index b1b8b938d7f4..15f6cde6452f 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -273,8 +273,8 @@ static inline unsigned char imx_i2c_read_reg(struct imx_i2c_struct *i2c_imx, } /* Functions for DMA support */ -static int i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx, - dma_addr_t phy_addr) +static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx, + dma_addr_t phy_addr) { struct imx_i2c_dma *dma; struct dma_slave_config dma_sconfig; @@ -283,7 +283,7 @@ static int i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx, dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL); if (!dma) - return -ENOMEM; + return; dma->chan_tx = dma_request_chan(dev, "tx"); if (IS_ERR(dma->chan_tx)) { @@ -328,7 +328,7 @@ static int i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx, dev_info(dev, "using %s (tx) and %s (rx) for DMA transfers\n", dma_chan_name(dma->chan_tx), dma_chan_name(dma->chan_rx)); - return 0; + return; fail_rx: dma_release_channel(dma->chan_rx); @@ -336,8 +336,6 @@ fail_tx: dma_release_channel(dma->chan_tx); fail_al: devm_kfree(dev, dma); - /* return successfully if there is no dma support */ - return ret == -ENODEV ? 0 : ret; } static void i2c_imx_dma_callback(void *arg) @@ -1165,17 +1163,13 @@ static int i2c_imx_probe(struct platform_device *pdev) dev_dbg(&i2c_imx->adapter.dev, "device resources: %pR\n", res); dev_dbg(&i2c_imx->adapter.dev, "adapter name: \"%s\"\n", i2c_imx->adapter.name); + dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n"); /* Init DMA config if supported */ - ret = i2c_imx_dma_request(i2c_imx, phy_addr); - if (ret < 0) - goto del_adapter; + i2c_imx_dma_request(i2c_imx, phy_addr); - dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n"); return 0; /* Return OK */ -del_adapter: - i2c_del_adapter(&i2c_imx->adapter); clk_notifier_unregister: clk_notifier_unregister(i2c_imx->clk, &i2c_imx->clk_change_nb); rpm_disable: diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c index 252edb433fdf..29eae1bf4f86 100644 --- a/drivers/i2c/busses/i2c-mt65xx.c +++ b/drivers/i2c/busses/i2c-mt65xx.c @@ -234,6 +234,10 @@ static const struct i2c_adapter_quirks mt7622_i2c_quirks = { .max_num_msgs = 255, }; +static const struct i2c_adapter_quirks mt8183_i2c_quirks = { + .flags = I2C_AQ_NO_ZERO_LEN, +}; + static const struct mtk_i2c_compatible mt2712_compat = { .regs = mt_i2c_regs_v1, .pmic_i2c = 0, @@ -298,6 +302,7 @@ static const struct mtk_i2c_compatible mt8173_compat = { }; static const struct mtk_i2c_compatible mt8183_compat = { + .quirks = &mt8183_i2c_quirks, .regs = mt_i2c_regs_v2, .pmic_i2c = 0, .dcm = 0, @@ -870,7 +875,11 @@ static irqreturn_t mtk_i2c_irq(int irqno, void *dev_id) static u32 mtk_i2c_functionality(struct i2c_adapter *adap) { - return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; + if (adap->quirks->flags & I2C_AQ_NO_ZERO_LEN) + return I2C_FUNC_I2C | + (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK); + else + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; } static const struct i2c_algorithm mtk_i2c_algorithm = { diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c index cfc76b5de726..5a1235fd86bb 100644 --- a/drivers/i2c/busses/i2c-nvidia-gpu.c +++ b/drivers/i2c/busses/i2c-nvidia-gpu.c @@ -364,7 +364,7 @@ static void gpu_i2c_remove(struct pci_dev *pdev) /* * We need gpu_i2c_suspend() even if it is stub, for runtime pm to work * correctly. Without it, lspci shows runtime pm status as "D0" for the card. - * Documentation/power/pci.txt also insists for driver to provide this. + * Documentation/power/pci.rst also insists for driver to provide this. */ static __maybe_unused int gpu_i2c_suspend(struct device *dev) { diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index c46c4bddc7ca..cba325eb852f 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -91,7 +91,7 @@ #define SB800_PIIX4_PORT_IDX_MASK 0x06 #define SB800_PIIX4_PORT_IDX_SHIFT 1 -/* On kerncz, SmBus0Sel is at bit 20:19 of PMx00 DecodeEn */ +/* On kerncz and Hudson2, SmBus0Sel is at bit 20:19 of PMx00 DecodeEn */ #define SB800_PIIX4_PORT_IDX_KERNCZ 0x02 #define SB800_PIIX4_PORT_IDX_MASK_KERNCZ 0x18 #define SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ 3 @@ -358,18 +358,16 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, /* Find which register is used for port selection */ if (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD || PIIX4_dev->vendor == PCI_VENDOR_ID_HYGON) { - switch (PIIX4_dev->device) { - case PCI_DEVICE_ID_AMD_KERNCZ_SMBUS: + if (PIIX4_dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS || + (PIIX4_dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS && + PIIX4_dev->revision >= 0x1F)) { piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_KERNCZ; piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK_KERNCZ; piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ; - break; - case PCI_DEVICE_ID_AMD_HUDSON2_SMBUS: - default: + } else { piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_ALT; piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK; piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT; - break; } } else { if (!request_muxed_region(SB800_PIIX4_SMB_IDX, 2, diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index d39a4606f72d..531c01100b56 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -139,6 +139,7 @@ struct rcar_i2c_priv { enum dma_data_direction dma_direction; struct reset_control *rstc; + int irq; }; #define rcar_i2c_priv_to_dev(p) ((p)->adap.dev.parent) @@ -861,9 +862,11 @@ static int rcar_unreg_slave(struct i2c_client *slave) WARN_ON(!priv->slave); + /* disable irqs and ensure none is running before clearing ptr */ rcar_i2c_write(priv, ICSIER, 0); rcar_i2c_write(priv, ICSCR, 0); + synchronize_irq(priv->irq); priv->slave = NULL; pm_runtime_put(rcar_i2c_priv_to_dev(priv)); @@ -918,7 +921,7 @@ static int rcar_i2c_probe(struct platform_device *pdev) struct i2c_adapter *adap; struct device *dev = &pdev->dev; struct i2c_timings i2c_t; - int irq, ret; + int ret; /* Otherwise logic will break because some bytes must always use PIO */ BUILD_BUG_ON_MSG(RCAR_MIN_DMA_LEN < 3, "Invalid min DMA length"); @@ -984,10 +987,10 @@ static int rcar_i2c_probe(struct platform_device *pdev) pm_runtime_put(dev); - irq = platform_get_irq(pdev, 0); - ret = devm_request_irq(dev, irq, rcar_i2c_irq, 0, dev_name(dev), priv); + priv->irq = platform_get_irq(pdev, 0); + ret = devm_request_irq(dev, priv->irq, rcar_i2c_irq, 0, dev_name(dev), priv); if (ret < 0) { - dev_err(dev, "cannot get irq %d\n", irq); + dev_err(dev, "cannot get irq %d\n", priv->irq); goto out_pm_disable; } diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index d97fb857b0ea..c98ef4c4a0c9 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -435,6 +435,7 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) * fall through to the write state, as we will need to * send a byte as well */ + /* Fall through */ case STATE_WRITE: /* diff --git a/drivers/i2c/busses/i2c-stm32.h b/drivers/i2c/busses/i2c-stm32.h index 868755f82f88..2c21893905a3 100644 --- a/drivers/i2c/busses/i2c-stm32.h +++ b/drivers/i2c/busses/i2c-stm32.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * i2c-stm32.h * diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c index c82e78f57386..37347c93e8e0 100644 --- a/drivers/i2c/busses/i2c-taos-evm.c +++ b/drivers/i2c/busses/i2c-taos-evm.c @@ -125,7 +125,7 @@ static int taos_smbus_xfer(struct i2c_adapter *adapter, u16 addr, /* * Voluntarily dropping error code of kstrtou8 since all * error code that it could return are invalid according - * to Documentation/i2c/fault-codes. + * to Documentation/i2c/fault-codes.rst. */ if (kstrtou8(p + 1, 16, &data->byte)) return -EPROTO; |