diff options
Diffstat (limited to 'drivers/hwtracing/coresight')
-rw-r--r-- | drivers/hwtracing/coresight/coresight-tmc-etr.c | 13 | ||||
-rw-r--r-- | drivers/hwtracing/coresight/coresight-tmc.h | 9 |
2 files changed, 21 insertions, 1 deletions
diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c index 40ddcf11ae4c..68fbc8f7450e 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-etr.c +++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c @@ -22,7 +22,7 @@ static void tmc_etr_enable_hw(struct tmc_drvdata *drvdata) { - u32 axictl; + u32 axictl, sts; /* Zero out the memory to help with debug */ memset(drvdata->vaddr, 0, drvdata->size); @@ -47,6 +47,17 @@ static void tmc_etr_enable_hw(struct tmc_drvdata *drvdata) writel_relaxed(axictl, drvdata->base + TMC_AXICTL); tmc_write_dba(drvdata, drvdata->paddr); + /* + * If the TMC pointers must be programmed before the session, + * we have to set it properly (i.e, RRP/RWP to base address and + * STS to "not full"). + */ + if (tmc_etr_has_cap(drvdata, TMC_ETR_SAVE_RESTORE)) { + tmc_write_rrp(drvdata, drvdata->paddr); + tmc_write_rwp(drvdata, drvdata->paddr); + sts = readl_relaxed(drvdata->base + TMC_STS) & ~TMC_STS_FULL; + writel_relaxed(sts, drvdata->base + TMC_STS); + } writel_relaxed(TMC_FFCR_EN_FMT | TMC_FFCR_EN_TI | TMC_FFCR_FON_FLIN | TMC_FFCR_FON_TRIG_EVT | diff --git a/drivers/hwtracing/coresight/coresight-tmc.h b/drivers/hwtracing/coresight/coresight-tmc.h index f39caa6a45c3..d0da43a14246 100644 --- a/drivers/hwtracing/coresight/coresight-tmc.h +++ b/drivers/hwtracing/coresight/coresight-tmc.h @@ -119,6 +119,15 @@ enum tmc_mem_intf_width { #define TMC_ETR_SG (0x1U << 0) /* ETR has separate read/write cache encodings */ #define TMC_ETR_AXI_ARCACHE (0x1U << 1) +/* + * TMC_ETR_SAVE_RESTORE - Values of RRP/RWP/STS.Full are + * retained when TMC leaves Disabled state, allowing us to continue + * the tracing from a point where we stopped. This also implies that + * the RRP/RWP/STS.Full should always be programmed to the correct + * value. Unfortunately this is not advertised by the hardware, + * so we have to rely on PID of the IP to detect the functionality. + */ +#define TMC_ETR_SAVE_RESTORE (0x1U << 2) /** * struct tmc_drvdata - specifics associated to an TMC component |