diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_dsi_vbt.c')
-rw-r--r-- | drivers/gpu/drm/i915/intel_dsi_vbt.c | 284 |
1 files changed, 197 insertions, 87 deletions
diff --git a/drivers/gpu/drm/i915/intel_dsi_vbt.c b/drivers/gpu/drm/i915/intel_dsi_vbt.c index ac83d6b89ae0..a72de81f4832 100644 --- a/drivers/gpu/drm/i915/intel_dsi_vbt.c +++ b/drivers/gpu/drm/i915/intel_dsi_vbt.c @@ -111,6 +111,7 @@ static inline enum port intel_dsi_seq_port_to_port(u8 port) static const u8 *mipi_exec_send_packet(struct intel_dsi *intel_dsi, const u8 *data) { + struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev); struct mipi_dsi_device *dsi_device; u8 type, flags, seq_port; u16 len; @@ -181,7 +182,8 @@ static const u8 *mipi_exec_send_packet(struct intel_dsi *intel_dsi, break; } - vlv_dsi_wait_for_fifo_empty(intel_dsi, port); + if (!IS_ICELAKE(dev_priv)) + vlv_dsi_wait_for_fifo_empty(intel_dsi, port); out: data += len; @@ -481,6 +483,17 @@ void intel_dsi_vbt_exec_sequence(struct intel_dsi *intel_dsi, } } +void intel_dsi_msleep(struct intel_dsi *intel_dsi, int msec) +{ + struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev); + + /* For v3 VBTs in vid-mode the delays are part of the VBT sequences */ + if (is_vid_mode(intel_dsi) && dev_priv->vbt.dsi.seq_version >= 3) + return; + + msleep(msec); +} + int intel_dsi_vbt_get_modes(struct intel_dsi *intel_dsi) { struct intel_connector *connector = intel_dsi->attached_connector; @@ -499,110 +512,125 @@ int intel_dsi_vbt_get_modes(struct intel_dsi *intel_dsi) return 1; } -bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id) +#define ICL_PREPARE_CNT_MAX 0x7 +#define ICL_CLK_ZERO_CNT_MAX 0xf +#define ICL_TRAIL_CNT_MAX 0x7 +#define ICL_TCLK_PRE_CNT_MAX 0x3 +#define ICL_TCLK_POST_CNT_MAX 0x7 +#define ICL_HS_ZERO_CNT_MAX 0xf +#define ICL_EXIT_ZERO_CNT_MAX 0x7 + +static void icl_dphy_param_init(struct intel_dsi *intel_dsi) { struct drm_device *dev = intel_dsi->base.base.dev; struct drm_i915_private *dev_priv = to_i915(dev); struct mipi_config *mipi_config = dev_priv->vbt.dsi.config; - struct mipi_pps_data *pps = dev_priv->vbt.dsi.pps; - struct drm_display_mode *mode = dev_priv->vbt.lfp_lvds_vbt_mode; - u32 bpp; - u32 tlpx_ns, extra_byte_count, bitrate, tlpx_ui; - u32 ui_num, ui_den; + u32 tlpx_ns; u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt; u32 ths_prepare_ns, tclk_trail_ns; - u32 tclk_prepare_clkzero, ths_prepare_hszero; - u32 lp_to_hs_switch, hs_to_lp_switch; - u32 pclk, computed_ddr; - u32 mul; - u16 burst_mode_ratio; - enum port port; + u32 hs_zero_cnt; + u32 tclk_pre_cnt, tclk_post_cnt; - DRM_DEBUG_KMS("\n"); + tlpx_ns = intel_dsi_tlpx_ns(intel_dsi); - intel_dsi->eotp_pkt = mipi_config->eot_pkt_disabled ? 0 : 1; - intel_dsi->clock_stop = mipi_config->enable_clk_stop ? 1 : 0; - intel_dsi->lane_count = mipi_config->lane_cnt + 1; - intel_dsi->pixel_format = - pixel_format_from_register_bits( - mipi_config->videomode_color_format << 7); - bpp = mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format); - - intel_dsi->dual_link = mipi_config->dual_link; - intel_dsi->pixel_overlap = mipi_config->pixel_overlap; - intel_dsi->operation_mode = mipi_config->is_cmd_mode; - intel_dsi->video_mode_format = mipi_config->video_transfer_mode; - intel_dsi->escape_clk_div = mipi_config->byte_clk_sel; - intel_dsi->lp_rx_timeout = mipi_config->lp_rx_timeout; - intel_dsi->turn_arnd_val = mipi_config->turn_around_timeout; - intel_dsi->rst_timer_val = mipi_config->device_reset_timer; - intel_dsi->init_count = mipi_config->master_init_timer; - intel_dsi->bw_timer = mipi_config->dbi_bw_timer; - intel_dsi->video_frmt_cfg_bits = - mipi_config->bta_enabled ? DISABLE_VIDEO_BTA : 0; - - pclk = mode->clock; + tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail); + ths_prepare_ns = max(mipi_config->ths_prepare, + mipi_config->tclk_prepare); - /* In dual link mode each port needs half of pixel clock */ - if (intel_dsi->dual_link) { - pclk = pclk / 2; + /* + * prepare cnt in escape clocks + * this field represents a hexadecimal value with a precision + * of 1.2 – i.e. the most significant bit is the integer + * and the least significant 2 bits are fraction bits. + * so, the field can represent a range of 0.25 to 1.75 + */ + prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * 4, tlpx_ns); + if (prepare_cnt > ICL_PREPARE_CNT_MAX) { + DRM_DEBUG_KMS("prepare_cnt out of range (%d)\n", prepare_cnt); + prepare_cnt = ICL_PREPARE_CNT_MAX; + } - /* we can enable pixel_overlap if needed by panel. In this - * case we need to increase the pixelclock for extra pixels - */ - if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) { - pclk += DIV_ROUND_UP(mode->vtotal * - intel_dsi->pixel_overlap * - 60, 1000); - } + /* clk zero count in escape clocks */ + clk_zero_cnt = DIV_ROUND_UP(mipi_config->tclk_prepare_clkzero - + ths_prepare_ns, tlpx_ns); + if (clk_zero_cnt > ICL_CLK_ZERO_CNT_MAX) { + DRM_DEBUG_KMS("clk_zero_cnt out of range (%d)\n", clk_zero_cnt); + clk_zero_cnt = ICL_CLK_ZERO_CNT_MAX; } - /* Burst Mode Ratio - * Target ddr frequency from VBT / non burst ddr freq - * multiply by 100 to preserve remainder - */ - if (intel_dsi->video_mode_format == VIDEO_MODE_BURST) { - if (mipi_config->target_burst_mode_freq) { - computed_ddr = (pclk * bpp) / intel_dsi->lane_count; + /* trail cnt in escape clocks*/ + trail_cnt = DIV_ROUND_UP(tclk_trail_ns, tlpx_ns); + if (trail_cnt > ICL_TRAIL_CNT_MAX) { + DRM_DEBUG_KMS("trail_cnt out of range (%d)\n", trail_cnt); + trail_cnt = ICL_TRAIL_CNT_MAX; + } - if (mipi_config->target_burst_mode_freq < - computed_ddr) { - DRM_ERROR("Burst mode freq is less than computed\n"); - return false; - } + /* tclk pre count in escape clocks */ + tclk_pre_cnt = DIV_ROUND_UP(mipi_config->tclk_pre, tlpx_ns); + if (tclk_pre_cnt > ICL_TCLK_PRE_CNT_MAX) { + DRM_DEBUG_KMS("tclk_pre_cnt out of range (%d)\n", tclk_pre_cnt); + tclk_pre_cnt = ICL_TCLK_PRE_CNT_MAX; + } - burst_mode_ratio = DIV_ROUND_UP( - mipi_config->target_burst_mode_freq * 100, - computed_ddr); + /* tclk post count in escape clocks */ + tclk_post_cnt = DIV_ROUND_UP(mipi_config->tclk_post, tlpx_ns); + if (tclk_post_cnt > ICL_TCLK_POST_CNT_MAX) { + DRM_DEBUG_KMS("tclk_post_cnt out of range (%d)\n", tclk_post_cnt); + tclk_post_cnt = ICL_TCLK_POST_CNT_MAX; + } - pclk = DIV_ROUND_UP(pclk * burst_mode_ratio, 100); - } else { - DRM_ERROR("Burst mode target is not set\n"); - return false; - } - } else - burst_mode_ratio = 100; + /* hs zero cnt in escape clocks */ + hs_zero_cnt = DIV_ROUND_UP(mipi_config->ths_prepare_hszero - + ths_prepare_ns, tlpx_ns); + if (hs_zero_cnt > ICL_HS_ZERO_CNT_MAX) { + DRM_DEBUG_KMS("hs_zero_cnt out of range (%d)\n", hs_zero_cnt); + hs_zero_cnt = ICL_HS_ZERO_CNT_MAX; + } - intel_dsi->burst_mode_ratio = burst_mode_ratio; - intel_dsi->pclk = pclk; + /* hs exit zero cnt in escape clocks */ + exit_zero_cnt = DIV_ROUND_UP(mipi_config->ths_exit, tlpx_ns); + if (exit_zero_cnt > ICL_EXIT_ZERO_CNT_MAX) { + DRM_DEBUG_KMS("exit_zero_cnt out of range (%d)\n", exit_zero_cnt); + exit_zero_cnt = ICL_EXIT_ZERO_CNT_MAX; + } - bitrate = (pclk * bpp) / intel_dsi->lane_count; + /* clock lane dphy timings */ + intel_dsi->dphy_reg = (CLK_PREPARE_OVERRIDE | + CLK_PREPARE(prepare_cnt) | + CLK_ZERO_OVERRIDE | + CLK_ZERO(clk_zero_cnt) | + CLK_PRE_OVERRIDE | + CLK_PRE(tclk_pre_cnt) | + CLK_POST_OVERRIDE | + CLK_POST(tclk_post_cnt) | + CLK_TRAIL_OVERRIDE | + CLK_TRAIL(trail_cnt)); + + /* data lanes dphy timings */ + intel_dsi->dphy_data_lane_reg = (HS_PREPARE_OVERRIDE | + HS_PREPARE(prepare_cnt) | + HS_ZERO_OVERRIDE | + HS_ZERO(hs_zero_cnt) | + HS_TRAIL_OVERRIDE | + HS_TRAIL(trail_cnt) | + HS_EXIT_OVERRIDE | + HS_EXIT(exit_zero_cnt)); +} - switch (intel_dsi->escape_clk_div) { - case 0: - tlpx_ns = 50; - break; - case 1: - tlpx_ns = 100; - break; +static void vlv_dphy_param_init(struct intel_dsi *intel_dsi) +{ + struct drm_device *dev = intel_dsi->base.base.dev; + struct drm_i915_private *dev_priv = to_i915(dev); + struct mipi_config *mipi_config = dev_priv->vbt.dsi.config; + u32 tlpx_ns, extra_byte_count, tlpx_ui; + u32 ui_num, ui_den; + u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt; + u32 ths_prepare_ns, tclk_trail_ns; + u32 tclk_prepare_clkzero, ths_prepare_hszero; + u32 lp_to_hs_switch, hs_to_lp_switch; + u32 mul; - case 2: - tlpx_ns = 200; - break; - default: - tlpx_ns = 50; - break; - } + tlpx_ns = intel_dsi_tlpx_ns(intel_dsi); switch (intel_dsi->lane_count) { case 1: @@ -620,7 +648,7 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id) /* in Kbps */ ui_num = NS_KHZ_RATIO; - ui_den = bitrate; + ui_den = intel_dsi_bitrate(intel_dsi); tclk_prepare_clkzero = mipi_config->tclk_prepare_clkzero; ths_prepare_hszero = mipi_config->ths_prepare_hszero; @@ -746,6 +774,88 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id) DIV_ROUND_UP(2 * tlpx_ui + trail_cnt * 2 + 8, 8); intel_dsi->clk_hs_to_lp_count += extra_byte_count; +} + +bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id) +{ + struct drm_device *dev = intel_dsi->base.base.dev; + struct drm_i915_private *dev_priv = to_i915(dev); + struct mipi_config *mipi_config = dev_priv->vbt.dsi.config; + struct mipi_pps_data *pps = dev_priv->vbt.dsi.pps; + struct drm_display_mode *mode = dev_priv->vbt.lfp_lvds_vbt_mode; + u16 burst_mode_ratio; + enum port port; + + DRM_DEBUG_KMS("\n"); + + intel_dsi->eotp_pkt = mipi_config->eot_pkt_disabled ? 0 : 1; + intel_dsi->clock_stop = mipi_config->enable_clk_stop ? 1 : 0; + intel_dsi->lane_count = mipi_config->lane_cnt + 1; + intel_dsi->pixel_format = + pixel_format_from_register_bits( + mipi_config->videomode_color_format << 7); + + intel_dsi->dual_link = mipi_config->dual_link; + intel_dsi->pixel_overlap = mipi_config->pixel_overlap; + intel_dsi->operation_mode = mipi_config->is_cmd_mode; + intel_dsi->video_mode_format = mipi_config->video_transfer_mode; + intel_dsi->escape_clk_div = mipi_config->byte_clk_sel; + intel_dsi->lp_rx_timeout = mipi_config->lp_rx_timeout; + intel_dsi->hs_tx_timeout = mipi_config->hs_tx_timeout; + intel_dsi->turn_arnd_val = mipi_config->turn_around_timeout; + intel_dsi->rst_timer_val = mipi_config->device_reset_timer; + intel_dsi->init_count = mipi_config->master_init_timer; + intel_dsi->bw_timer = mipi_config->dbi_bw_timer; + intel_dsi->video_frmt_cfg_bits = + mipi_config->bta_enabled ? DISABLE_VIDEO_BTA : 0; + intel_dsi->bgr_enabled = mipi_config->rgb_flip; + + /* Starting point, adjusted depending on dual link and burst mode */ + intel_dsi->pclk = mode->clock; + + /* In dual link mode each port needs half of pixel clock */ + if (intel_dsi->dual_link) { + intel_dsi->pclk /= 2; + + /* we can enable pixel_overlap if needed by panel. In this + * case we need to increase the pixelclock for extra pixels + */ + if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) { + intel_dsi->pclk += DIV_ROUND_UP(mode->vtotal * intel_dsi->pixel_overlap * 60, 1000); + } + } + + /* Burst Mode Ratio + * Target ddr frequency from VBT / non burst ddr freq + * multiply by 100 to preserve remainder + */ + if (intel_dsi->video_mode_format == VIDEO_MODE_BURST) { + if (mipi_config->target_burst_mode_freq) { + u32 bitrate = intel_dsi_bitrate(intel_dsi); + + if (mipi_config->target_burst_mode_freq < bitrate) { + DRM_ERROR("Burst mode freq is less than computed\n"); + return false; + } + + burst_mode_ratio = DIV_ROUND_UP( + mipi_config->target_burst_mode_freq * 100, + bitrate); + + intel_dsi->pclk = DIV_ROUND_UP(intel_dsi->pclk * burst_mode_ratio, 100); + } else { + DRM_ERROR("Burst mode target is not set\n"); + return false; + } + } else + burst_mode_ratio = 100; + + intel_dsi->burst_mode_ratio = burst_mode_ratio; + + if (IS_ICELAKE(dev_priv)) + icl_dphy_param_init(intel_dsi); + else + vlv_dphy_param_init(intel_dsi); DRM_DEBUG_KMS("Pclk %d\n", intel_dsi->pclk); DRM_DEBUG_KMS("Pixel overlap %d\n", intel_dsi->pixel_overlap); |