1 files changed, 0 insertions, 128 deletions
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
index f567141aff54..2c7870aef469 100644
--- a/drivers/gpu/drm/drm_dp_helper.c
+++ b/drivers/gpu/drm/drm_dp_helper.c
@@ -352,134 +352,6 @@ int drm_dp_dpcd_read_link_status(struct drm_dp_aux *aux,
 EXPORT_SYMBOL(drm_dp_dpcd_read_link_status);
 
 /**
- * drm_dp_link_probe() - probe a DisplayPort link for capabilities
- * @aux: DisplayPort AUX channel
- * @link: pointer to structure in which to return link capabilities
- *
- * The structure filled in by this function can usually be passed directly
- * into drm_dp_link_power_up() and drm_dp_link_configure() to power up and
- * configure the link based on the link's capabilities.
- *
- * Returns 0 on success or a negative error code on failure.
- */
-int drm_dp_link_probe(struct drm_dp_aux *aux, struct drm_dp_link *link)
-{
-	u8 values[3];
-	int err;
-
-	memset(link, 0, sizeof(*link));
-
-	err = drm_dp_dpcd_read(aux, DP_DPCD_REV, values, sizeof(values));
-	if (err < 0)
-		return err;
-
-	link->revision = values[0];
-	link->rate = drm_dp_bw_code_to_link_rate(values[1]);
-	link->num_lanes = values[2] & DP_MAX_LANE_COUNT_MASK;
-
-	if (values[2] & DP_ENHANCED_FRAME_CAP)
-		link->capabilities |= DP_LINK_CAP_ENHANCED_FRAMING;
-
-	return 0;
-}
-EXPORT_SYMBOL(drm_dp_link_probe);
-
-/**
- * drm_dp_link_power_up() - power up a DisplayPort link
- * @aux: DisplayPort AUX channel
- * @link: pointer to a structure containing the link configuration
- *
- * Returns 0 on success or a negative error code on failure.
- */
-int drm_dp_link_power_up(struct drm_dp_aux *aux, struct drm_dp_link *link)
-{
-	u8 value;
-	int err;
-
-	/* DP_SET_POWER register is only available on DPCD v1.1 and later */
-	if (link->revision < 0x11)
-		return 0;
-
-	err = drm_dp_dpcd_readb(aux, DP_SET_POWER, &value);
-	if (err < 0)
-		return err;
-
-	value &= ~DP_SET_POWER_MASK;
-	value |= DP_SET_POWER_D0;
-
-	err = drm_dp_dpcd_writeb(aux, DP_SET_POWER, value);
-	if (err < 0)
-		return err;
-
-	/*
-	 * According to the DP 1.1 specification, a "Sink Device must exit the
-	 * power saving state within 1 ms" (Section 2.5.3.1, Table 5-52, "Sink
-	 * Control Field" (register 0x600).
-	 */
-	usleep_range(1000, 2000);
-
-	return 0;
-}
-EXPORT_SYMBOL(drm_dp_link_power_up);
-
-/**
- * drm_dp_link_power_down() - power down a DisplayPort link
- * @aux: DisplayPort AUX channel
- * @link: pointer to a structure containing the link configuration
- *
- * Returns 0 on success or a negative error code on failure.
- */
-int drm_dp_link_power_down(struct drm_dp_aux *aux, struct drm_dp_link *link)
-{
-	u8 value;
-	int err;
-
-	/* DP_SET_POWER register is only available on DPCD v1.1 and later */
-	if (link->revision < 0x11)
-		return 0;
-
-	err = drm_dp_dpcd_readb(aux, DP_SET_POWER, &value);
-	if (err < 0)
-		return err;
-
-	value &= ~DP_SET_POWER_MASK;
-	value |= DP_SET_POWER_D3;
-
-	err = drm_dp_dpcd_writeb(aux, DP_SET_POWER, value);
-	if (err < 0)
-		return err;
-
-	return 0;
-}
-EXPORT_SYMBOL(drm_dp_link_power_down);
-
-/**
- * drm_dp_link_configure() - configure a DisplayPort link
- * @aux: DisplayPort AUX channel
- * @link: pointer to a structure containing the link configuration
- *
- * Returns 0 on success or a negative error code on failure.
- */
-int drm_dp_link_configure(struct drm_dp_aux *aux, struct drm_dp_link *link)
-{
-	u8 values[2];
-	int err;
-
-	values[0] = drm_dp_link_rate_to_bw_code(link->rate);
-	values[1] = link->num_lanes;
-
-	if (link->capabilities & DP_LINK_CAP_ENHANCED_FRAMING)
-		values[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
-
-	err = drm_dp_dpcd_write(aux, DP_LINK_BW_SET, values, sizeof(values));
-	if (err < 0)
-		return err;
-
-	return 0;
-}
-EXPORT_SYMBOL(drm_dp_link_configure);
-
-/**
  * drm_dp_downstream_max_clock() - extract branch device max
  *                                 pixel rate for legacy VGA
  *                                 converter or max TMDS clock