diff options
Diffstat (limited to 'drivers/clk')
68 files changed, 4316 insertions, 544 deletions
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 69934c0c3dd8..4026fac9fac3 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -50,6 +50,7 @@ source "drivers/clk/versatile/Kconfig" config CLK_HSDK bool "PLL Driver for HSDK platform" depends on OF || COMPILE_TEST + depends on HAS_IOMEM help This driver supports the HSDK core, system, ddr, tunnel and hdmi PLLs control. @@ -120,7 +121,6 @@ config COMMON_CLK_SI5351 tristate "Clock driver for SiLabs 5351A/B/C" depends on I2C select REGMAP_I2C - select RATIONAL help This driver supports Silicon Labs 5351A/B/C programmable clock generators. @@ -162,7 +162,6 @@ config COMMON_CLK_CDCE706 tristate "Clock driver for TI CDCE706 clock synthesizer" depends on I2C select REGMAP_I2C - select RATIONAL help This driver supports TI CDCE706 programmable 3-PLL clock synthesizer. diff --git a/drivers/clk/actions/owl-s500.c b/drivers/clk/actions/owl-s500.c index e2007ac4d235..61bb224f6330 100644 --- a/drivers/clk/actions/owl-s500.c +++ b/drivers/clk/actions/owl-s500.c @@ -23,8 +23,10 @@ #include "owl-gate.h" #include "owl-mux.h" #include "owl-pll.h" +#include "owl-reset.h" #include <dt-bindings/clock/actions,s500-cmu.h> +#include <dt-bindings/reset/actions,s500-reset.h> #define CMU_COREPLL (0x0000) #define CMU_DEVPLL (0x0004) @@ -175,6 +177,8 @@ static OWL_MUX(dev_clk, "dev_clk", dev_clk_mux_p, CMU_DEVPLL, 12, 1, CLK_SET_RAT static OWL_MUX(ahbprediv_clk, "ahbprediv_clk", ahbprediv_clk_mux_p, CMU_BUSCLK1, 8, 3, CLK_SET_RATE_PARENT); /* gate clocks */ +static OWL_GATE(gpio_clk, "gpio_clk", "apb_clk", CMU_DEVCLKEN0, 18, 0, 0); +static OWL_GATE(dmac_clk, "dmac_clk", "h_clk", CMU_DEVCLKEN0, 1, 0, 0); static OWL_GATE(spi0_clk, "spi0_clk", "ahb_clk", CMU_DEVCLKEN1, 10, 0, CLK_IGNORE_UNUSED); static OWL_GATE(spi1_clk, "spi1_clk", "ahb_clk", CMU_DEVCLKEN1, 11, 0, CLK_IGNORE_UNUSED); static OWL_GATE(spi2_clk, "spi2_clk", "ahb_clk", CMU_DEVCLKEN1, 12, 0, CLK_IGNORE_UNUSED); @@ -183,7 +187,8 @@ static OWL_GATE(timer_clk, "timer_clk", "hosc", CMU_DEVCLKEN1, 27, 0, 0); static OWL_GATE(hdmi_clk, "hdmi_clk", "hosc", CMU_DEVCLKEN1, 3, 0, 0); /* divider clocks */ -static OWL_DIVIDER(h_clk, "h_clk", "ahbprevdiv_clk", CMU_BUSCLK1, 12, 2, NULL, 0, 0); +static OWL_DIVIDER(h_clk, "h_clk", "ahbprediv_clk", CMU_BUSCLK1, 12, 2, NULL, 0, 0); +static OWL_DIVIDER(apb_clk, "apb_clk", "ahb_clk", CMU_BUSCLK1, 14, 2, NULL, 0, 0); static OWL_DIVIDER(rmii_ref_clk, "rmii_ref_clk", "ethernet_pll_clk", CMU_ETHERNETPLL, 1, 1, rmii_ref_div_table, 0, 0); /* factor clocks */ @@ -428,6 +433,9 @@ static struct owl_clk_common *s500_clks[] = { &spdif_clk.common, &nand_clk.common, &ecc_clk.common, + &apb_clk.common, + &dmac_clk.common, + &gpio_clk.common, }; static struct clk_hw_onecell_data s500_hw_clks = { @@ -484,24 +492,103 @@ static struct clk_hw_onecell_data s500_hw_clks = { [CLK_SPDIF] = &spdif_clk.common.hw, [CLK_NAND] = &nand_clk.common.hw, [CLK_ECC] = &ecc_clk.common.hw, + [CLK_APB] = &apb_clk.common.hw, + [CLK_DMAC] = &dmac_clk.common.hw, + [CLK_GPIO] = &gpio_clk.common.hw, }, .num = CLK_NR_CLKS, }; +static const struct owl_reset_map s500_resets[] = { + [RESET_DMAC] = { CMU_DEVRST0, BIT(0) }, + [RESET_NORIF] = { CMU_DEVRST0, BIT(1) }, + [RESET_DDR] = { CMU_DEVRST0, BIT(2) }, + [RESET_NANDC] = { CMU_DEVRST0, BIT(3) }, + [RESET_SD0] = { CMU_DEVRST0, BIT(4) }, + [RESET_SD1] = { CMU_DEVRST0, BIT(5) }, + [RESET_PCM1] = { CMU_DEVRST0, BIT(6) }, + [RESET_DE] = { CMU_DEVRST0, BIT(7) }, + [RESET_LCD] = { CMU_DEVRST0, BIT(8) }, + [RESET_SD2] = { CMU_DEVRST0, BIT(9) }, + [RESET_DSI] = { CMU_DEVRST0, BIT(10) }, + [RESET_CSI] = { CMU_DEVRST0, BIT(11) }, + [RESET_BISP] = { CMU_DEVRST0, BIT(12) }, + [RESET_KEY] = { CMU_DEVRST0, BIT(14) }, + [RESET_GPIO] = { CMU_DEVRST0, BIT(15) }, + [RESET_AUDIO] = { CMU_DEVRST0, BIT(17) }, + [RESET_PCM0] = { CMU_DEVRST0, BIT(18) }, + [RESET_VDE] = { CMU_DEVRST0, BIT(19) }, + [RESET_VCE] = { CMU_DEVRST0, BIT(20) }, + [RESET_GPU3D] = { CMU_DEVRST0, BIT(22) }, + [RESET_NIC301] = { CMU_DEVRST0, BIT(23) }, + [RESET_LENS] = { CMU_DEVRST0, BIT(26) }, + [RESET_PERIPHRESET] = { CMU_DEVRST0, BIT(27) }, + [RESET_USB2_0] = { CMU_DEVRST1, BIT(0) }, + [RESET_TVOUT] = { CMU_DEVRST1, BIT(1) }, + [RESET_HDMI] = { CMU_DEVRST1, BIT(2) }, + [RESET_HDCP2TX] = { CMU_DEVRST1, BIT(3) }, + [RESET_UART6] = { CMU_DEVRST1, BIT(4) }, + [RESET_UART0] = { CMU_DEVRST1, BIT(5) }, + [RESET_UART1] = { CMU_DEVRST1, BIT(6) }, + [RESET_UART2] = { CMU_DEVRST1, BIT(7) }, + [RESET_SPI0] = { CMU_DEVRST1, BIT(8) }, + [RESET_SPI1] = { CMU_DEVRST1, BIT(9) }, + [RESET_SPI2] = { CMU_DEVRST1, BIT(10) }, + [RESET_SPI3] = { CMU_DEVRST1, BIT(11) }, + [RESET_I2C0] = { CMU_DEVRST1, BIT(12) }, + [RESET_I2C1] = { CMU_DEVRST1, BIT(13) }, + [RESET_USB3] = { CMU_DEVRST1, BIT(14) }, + [RESET_UART3] = { CMU_DEVRST1, BIT(15) }, + [RESET_UART4] = { CMU_DEVRST1, BIT(16) }, + [RESET_UART5] = { CMU_DEVRST1, BIT(17) }, + [RESET_I2C2] = { CMU_DEVRST1, BIT(18) }, + [RESET_I2C3] = { CMU_DEVRST1, BIT(19) }, + [RESET_ETHERNET] = { CMU_DEVRST1, BIT(20) }, + [RESET_CHIPID] = { CMU_DEVRST1, BIT(21) }, + [RESET_USB2_1] = { CMU_DEVRST1, BIT(22) }, + [RESET_WD0RESET] = { CMU_DEVRST1, BIT(24) }, + [RESET_WD1RESET] = { CMU_DEVRST1, BIT(25) }, + [RESET_WD2RESET] = { CMU_DEVRST1, BIT(26) }, + [RESET_WD3RESET] = { CMU_DEVRST1, BIT(27) }, + [RESET_DBG0RESET] = { CMU_DEVRST1, BIT(28) }, + [RESET_DBG1RESET] = { CMU_DEVRST1, BIT(29) }, + [RESET_DBG2RESET] = { CMU_DEVRST1, BIT(30) }, + [RESET_DBG3RESET] = { CMU_DEVRST1, BIT(31) }, +}; + static struct owl_clk_desc s500_clk_desc = { .clks = s500_clks, .num_clks = ARRAY_SIZE(s500_clks), .hw_clks = &s500_hw_clks, + + .resets = s500_resets, + .num_resets = ARRAY_SIZE(s500_resets), }; static int s500_clk_probe(struct platform_device *pdev) { struct owl_clk_desc *desc; + struct owl_reset *reset; + int ret; desc = &s500_clk_desc; owl_clk_regmap_init(pdev, desc); + reset = devm_kzalloc(&pdev->dev, sizeof(*reset), GFP_KERNEL); + if (!reset) + return -ENOMEM; + + reset->rcdev.of_node = pdev->dev.of_node; + reset->rcdev.ops = &owl_reset_ops; + reset->rcdev.nr_resets = desc->num_resets; + reset->reset_map = desc->resets; + reset->regmap = desc->regmap; + + ret = devm_reset_controller_register(&pdev->dev, &reset->rcdev); + if (ret) + dev_err(&pdev->dev, "Failed to register reset controller\n"); + return owl_clk_probe(&pdev->dev, desc->hw_clks); } diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig index 8c83977a7dc4..784f12c72365 100644 --- a/drivers/clk/bcm/Kconfig +++ b/drivers/clk/bcm/Kconfig @@ -1,4 +1,15 @@ # SPDX-License-Identifier: GPL-2.0-only + +config CLK_BCM2711_DVP + tristate "Broadcom BCM2711 DVP support" + depends on ARCH_BCM2835 ||COMPILE_TEST + depends on COMMON_CLK + default ARCH_BCM2835 + select RESET_SIMPLE + help + Enable common clock framework support for the Broadcom BCM2711 + DVP Controller. + config CLK_BCM2835 bool "Broadcom BCM2835 clock support" depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile index 0070ddf6cdd2..edb66b44cb27 100644 --- a/drivers/clk/bcm/Makefile +++ b/drivers/clk/bcm/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-kona-setup.o obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o +obj-$(CONFIG_CLK_BCM2711_DVP) += clk-bcm2711-dvp.o obj-$(CONFIG_CLK_BCM2835) += clk-bcm2835.o obj-$(CONFIG_CLK_BCM2835) += clk-bcm2835-aux.o obj-$(CONFIG_CLK_RASPBERRYPI) += clk-raspberrypi.o diff --git a/drivers/clk/bcm/clk-bcm2711-dvp.c b/drivers/clk/bcm/clk-bcm2711-dvp.c new file mode 100644 index 000000000000..8333e20dc9d2 --- /dev/null +++ b/drivers/clk/bcm/clk-bcm2711-dvp.c @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2020 Cerno + +#include <linux/clk-provider.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/reset-controller.h> +#include <linux/reset/reset-simple.h> + +#define DVP_HT_RPI_SW_INIT 0x04 +#define DVP_HT_RPI_MISC_CONFIG 0x08 + +#define NR_CLOCKS 2 +#define NR_RESETS 6 + +struct clk_dvp { + struct clk_hw_onecell_data *data; + struct reset_simple_data reset; +}; + +static const struct clk_parent_data clk_dvp_parent = { + .index = 0, +}; + +static int clk_dvp_probe(struct platform_device *pdev) +{ + struct clk_hw_onecell_data *data; + struct resource *res; + struct clk_dvp *dvp; + void __iomem *base; + int ret; + + dvp = devm_kzalloc(&pdev->dev, sizeof(*dvp), GFP_KERNEL); + if (!dvp) + return -ENOMEM; + platform_set_drvdata(pdev, dvp); + + dvp->data = devm_kzalloc(&pdev->dev, + struct_size(dvp->data, hws, NR_CLOCKS), + GFP_KERNEL); + if (!dvp->data) + return -ENOMEM; + data = dvp->data; + + base = devm_platform_get_and_ioremap_resource(pdev, 0, &res); + if (IS_ERR(base)) + return PTR_ERR(base); + + dvp->reset.rcdev.owner = THIS_MODULE; + dvp->reset.rcdev.nr_resets = NR_RESETS; + dvp->reset.rcdev.ops = &reset_simple_ops; + dvp->reset.rcdev.of_node = pdev->dev.of_node; + dvp->reset.membase = base + DVP_HT_RPI_SW_INIT; + spin_lock_init(&dvp->reset.lock); + + ret = devm_reset_controller_register(&pdev->dev, &dvp->reset.rcdev); + if (ret) + return ret; + + data->hws[0] = clk_hw_register_gate_parent_data(&pdev->dev, + "hdmi0-108MHz", + &clk_dvp_parent, 0, + base + DVP_HT_RPI_MISC_CONFIG, 3, + CLK_GATE_SET_TO_DISABLE, + &dvp->reset.lock); + if (IS_ERR(data->hws[0])) + return PTR_ERR(data->hws[0]); + + data->hws[1] = clk_hw_register_gate_parent_data(&pdev->dev, + "hdmi1-108MHz", + &clk_dvp_parent, 0, + base + DVP_HT_RPI_MISC_CONFIG, 4, + CLK_GATE_SET_TO_DISABLE, + &dvp->reset.lock); + if (IS_ERR(data->hws[1])) { + ret = PTR_ERR(data->hws[1]); + goto unregister_clk0; + } + + data->num = NR_CLOCKS; + ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get, + data); + if (ret) + goto unregister_clk1; + + return 0; + +unregister_clk1: + clk_hw_unregister_gate(data->hws[1]); + +unregister_clk0: + clk_hw_unregister_gate(data->hws[0]); + return ret; +}; + +static int clk_dvp_remove(struct platform_device *pdev) +{ + struct clk_dvp *dvp = platform_get_drvdata(pdev); + struct clk_hw_onecell_data *data = dvp->data; + + clk_hw_unregister_gate(data->hws[1]); + clk_hw_unregister_gate(data->hws[0]); + + return 0; +} + +static const struct of_device_id clk_dvp_dt_ids[] = { + { .compatible = "brcm,brcm2711-dvp", }, + { /* sentinel */ } +}; + +static struct platform_driver clk_dvp_driver = { + .probe = clk_dvp_probe, + .remove = clk_dvp_remove, + .driver = { + .name = "brcm2711-dvp", + .of_match_table = clk_dvp_dt_ids, + }, +}; +module_platform_driver(clk_dvp_driver); + +MODULE_AUTHOR("Maxime Ripard <maxime@cerno.tech>"); +MODULE_DESCRIPTION("BCM2711 DVP clock driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c index 6bb7efa12037..3439bc65bb4e 100644 --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c @@ -314,6 +314,7 @@ struct bcm2835_cprman { struct device *dev; void __iomem *regs; spinlock_t regs_lock; /* spinlock for all clocks */ + unsigned int soc; /* * Real names of cprman clock parents looked up through @@ -421,6 +422,7 @@ struct bcm2835_pll_data { u32 reference_enable_mask; /* Bit in CM_LOCK to indicate when the PLL has locked. */ u32 lock_mask; + u32 flags; const struct bcm2835_pll_ana_bits *ana; @@ -525,6 +527,20 @@ static int bcm2835_pll_is_on(struct clk_hw *hw) A2W_PLL_CTRL_PRST_DISABLE; } +static u32 bcm2835_pll_get_prediv_mask(struct bcm2835_cprman *cprman, + const struct bcm2835_pll_data *data) +{ + /* + * On BCM2711 there isn't a pre-divisor available in the PLL feedback + * loop. Bits 13:14 of ANA1 (PLLA,PLLB,PLLC,PLLD) have been re-purposed + * for to for VCO RANGE bits. + */ + if (cprman->soc & SOC_BCM2711) + return 0; + + return data->ana->fb_prediv_mask; +} + static void bcm2835_pll_choose_ndiv_and_fdiv(unsigned long rate, unsigned long parent_rate, u32 *ndiv, u32 *fdiv) @@ -582,7 +598,7 @@ static unsigned long bcm2835_pll_get_rate(struct clk_hw *hw, ndiv = (a2wctrl & A2W_PLL_CTRL_NDIV_MASK) >> A2W_PLL_CTRL_NDIV_SHIFT; pdiv = (a2wctrl & A2W_PLL_CTRL_PDIV_MASK) >> A2W_PLL_CTRL_PDIV_SHIFT; using_prediv = cprman_read(cprman, data->ana_reg_base + 4) & - data->ana->fb_prediv_mask; + bcm2835_pll_get_prediv_mask(cprman, data); if (using_prediv) { ndiv *= 2; @@ -665,6 +681,7 @@ static int bcm2835_pll_set_rate(struct clk_hw *hw, struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw); struct bcm2835_cprman *cprman = pll->cprman; const struct bcm2835_pll_data *data = pll->data; + u32 prediv_mask = bcm2835_pll_get_prediv_mask(cprman, data); bool was_using_prediv, use_fb_prediv, do_ana_setup_first; u32 ndiv, fdiv, a2w_ctl; u32 ana[4]; @@ -682,7 +699,7 @@ static int bcm2835_pll_set_rate(struct clk_hw *hw, for (i = 3; i >= 0; i--) ana[i] = cprman_read(cprman, data->ana_reg_base + i * 4); - was_using_prediv = ana[1] & data->ana->fb_prediv_mask; + was_using_prediv = ana[1] & prediv_mask; ana[0] &= ~data->ana->mask0; ana[0] |= data->ana->set0; @@ -692,10 +709,10 @@ static int bcm2835_pll_set_rate(struct clk_hw *hw, ana[3] |= data->ana->set3; if (was_using_prediv && !use_fb_prediv) { - ana[1] &= ~data->ana->fb_prediv_mask; + ana[1] &= ~prediv_mask; do_ana_setup_first = true; } else if (!was_using_prediv && use_fb_prediv) { - ana[1] |= data->ana->fb_prediv_mask; + ana[1] |= prediv_mask; do_ana_setup_first = false; } else { do_ana_setup_first = true; @@ -1310,7 +1327,7 @@ static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman, init.num_parents = 1; init.name = pll_data->name; init.ops = &bcm2835_pll_clk_ops; - init.flags = CLK_IGNORE_UNUSED; + init.flags = pll_data->flags | CLK_IGNORE_UNUSED; pll = kzalloc(sizeof(*pll), GFP_KERNEL); if (!pll) @@ -1684,10 +1701,33 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { .fixed_divider = 1, .flags = CLK_SET_RATE_PARENT), - /* - * PLLB is used for the ARM's clock. Controlled by firmware, see - * clk-raspberrypi.c. - */ + /* PLLB is used for the ARM's clock. */ + [BCM2835_PLLB] = REGISTER_PLL( + SOC_ALL, + .name = "pllb", + .cm_ctrl_reg = CM_PLLB, + .a2w_ctrl_reg = A2W_PLLB_CTRL, + .frac_reg = A2W_PLLB_FRAC, + .ana_reg_base = A2W_PLLB_ANA0, + .reference_enable_mask = A2W_XOSC_CTRL_PLLB_ENABLE, + .lock_mask = CM_LOCK_FLOCKB, + + .ana = &bcm2835_ana_default, + + .min_rate = 600000000u, + .max_rate = 3000000000u, + .max_fb_rate = BCM2835_MAX_FB_RATE, + .flags = CLK_GET_RATE_NOCACHE), + [BCM2835_PLLB_ARM] = REGISTER_PLL_DIV( + SOC_ALL, + .name = "pllb_arm", + .source_pll = "pllb", + .cm_reg = CM_PLLB, + .a2w_reg = A2W_PLLB_ARM, + .load_mask = CM_PLLB_LOADARM, + .hold_mask = CM_PLLB_HOLDARM, + .fixed_divider = 1, + .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE), /* * PLLC is the core PLL, used to drive the core VPU clock. @@ -2238,6 +2278,7 @@ static int bcm2835_clk_probe(struct platform_device *pdev) platform_set_drvdata(pdev, cprman); cprman->onecell.num = asize; + cprman->soc = pdata->soc; hws = cprman->onecell.hws; for (i = 0; i < asize; i++) { diff --git a/drivers/clk/bcm/clk-bcm63xx-gate.c b/drivers/clk/bcm/clk-bcm63xx-gate.c index 98e884957db8..89297c57881e 100644 --- a/drivers/clk/bcm/clk-bcm63xx-gate.c +++ b/drivers/clk/bcm/clk-bcm63xx-gate.c @@ -6,6 +6,14 @@ #include <linux/of_device.h> #include <linux/platform_device.h> +#include <dt-bindings/clock/bcm3368-clock.h> +#include <dt-bindings/clock/bcm6318-clock.h> +#include <dt-bindings/clock/bcm6328-clock.h> +#include <dt-bindings/clock/bcm6358-clock.h> +#include <dt-bindings/clock/bcm6362-clock.h> +#include <dt-bindings/clock/bcm6368-clock.h> +#include <dt-bindings/clock/bcm63268-clock.h> + struct clk_bcm63xx_table_entry { const char * const name; u8 bit; @@ -20,126 +28,458 @@ struct clk_bcm63xx_ |