diff options
Diffstat (limited to 'drivers/ata')
85 files changed, 2050 insertions, 745 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 4e737728aee2..20e03a7eb8b4 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -11,13 +11,13 @@ config HAVE_PATA_PLATFORM to update the PATA_PLATFORM entry. menuconfig ATA - tristate "Serial ATA and Parallel ATA drivers" + tristate "Serial ATA and Parallel ATA drivers (libata)" depends on HAS_IOMEM depends on BLOCK depends on !(M32R || M68K || S390) || BROKEN select SCSI ---help--- - If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or + If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or any other ATA device under Linux, say Y and make sure that you know the name of your ATA host adapter (the card inside your computer that "speaks" the ATA protocol, also called ATA controller), @@ -60,7 +60,7 @@ config ATA_ACPI config SATA_ZPODD bool "SATA Zero Power Optical Disc Drive (ZPODD) support" - depends on ATA_ACPI + depends on ATA_ACPI && PM_RUNTIME default n help This option adds support for SATA Zero Power Optical Disc @@ -97,15 +97,48 @@ config SATA_AHCI_PLATFORM If unsure, say N. +config AHCI_DA850 + tristate "DaVinci DA850 AHCI SATA support" + depends on ARCH_DAVINCI_DA850 + help + This option enables support for the DaVinci DA850 SoC's + onboard AHCI SATA. + + If unsure, say N. + +config AHCI_ST + tristate "ST AHCI SATA support" + depends on ARCH_STI + help + This option enables support for ST AHCI SATA controller. + + If unsure, say N. + config AHCI_IMX tristate "Freescale i.MX AHCI SATA support" - depends on SATA_AHCI_PLATFORM && MFD_SYSCON + depends on MFD_SYSCON help This option enables support for the Freescale i.MX SoC's onboard AHCI SATA. If unsure, say N. +config AHCI_SUNXI + tristate "Allwinner sunxi AHCI SATA support" + depends on ARCH_SUNXI + help + This option enables support for the Allwinner sunxi SoC's + onboard AHCI SATA. + + If unsure, say N. + +config AHCI_XGENE + tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support" + depends on ARM64 || COMPILE_TEST + select PHY_XGENE + help + This option enables support for APM X-Gene SoC SATA host controller. + config SATA_FSL tristate "Freescale 3.0Gbps SATA support" depends on FSL_SOC @@ -239,6 +272,7 @@ config SATA_DWC_VDEBUG config SATA_HIGHBANK tristate "Calxeda Highbank SATA support" + depends on ARCH_HIGHBANK || COMPILE_TEST help This option enables support for the Calxeda Highbank SoC's onboard SATA. @@ -247,6 +281,9 @@ config SATA_HIGHBANK config SATA_MV tristate "Marvell SATA support" + depends on PCI || ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \ + ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST + select GENERIC_PHY help This option enables support for the Marvell Serial ATA family. Currently supports 88SX[56]0[48][01] PCI(-X) chips, @@ -272,6 +309,7 @@ config SATA_PROMISE config SATA_RCAR tristate "Renesas R-Car SATA support" + depends on ARCH_SHMOBILE || COMPILE_TEST help This option enables support for Renesas R-Car Serial ATA. @@ -351,6 +389,7 @@ config PATA_AMD config PATA_ARASAN_CF tristate "ARASAN CompactFlash PATA Controller Support" + depends on ARCH_SPEAR13XX || COMPILE_TEST depends on DMADEVICES select DMA_ENGINE help @@ -402,7 +441,7 @@ config PATA_CMD64X config PATA_CS5520 tristate "CS5510/5520 PATA support" - depends on PCI + depends on PCI && (X86_32 || COMPILE_TEST) help This option enables support for the Cyrix 5510/5520 companion chip used with the MediaGX/Geode processor family. @@ -411,7 +450,7 @@ config PATA_CS5520 config PATA_CS5530 tristate "CS5530 PATA support" - depends on PCI + depends on PCI && (X86_32 || COMPILE_TEST) help This option enables support for the Cyrix/NatSemi/AMD CS5530 companion chip used with the MediaGX/Geode processor family. @@ -420,7 +459,7 @@ config PATA_CS5530 config PATA_CS5535 tristate "CS5535 PATA support (Experimental)" - depends on PCI && X86 && !X86_64 + depends on PCI && X86_32 help This option enables support for the NatSemi/AMD CS5535 companion chip used with the Geode processor family. @@ -429,7 +468,7 @@ config PATA_CS5535 config PATA_CS5536 tristate "CS5536 PATA support" - depends on PCI + depends on PCI && (X86_32 || MIPS || COMPILE_TEST) help This option enables support for the AMD CS5536 companion chip used with the Geode LX processor family. @@ -665,7 +704,7 @@ config PATA_RDC config PATA_SC1200 tristate "SC1200 PATA support" - depends on PCI + depends on PCI && (X86_32 || COMPILE_TEST) help This option enables support for the NatSemi/AMD SC1200 SoC companion chip used with the Geode processor family. diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 46518c622460..44c8016e565c 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -4,13 +4,17 @@ obj-$(CONFIG_ATA) += libata.o # non-SFF interface obj-$(CONFIG_SATA_AHCI) += ahci.o libahci.o obj-$(CONFIG_SATA_ACARD_AHCI) += acard-ahci.o libahci.o -obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o +obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o libahci_platform.o obj-$(CONFIG_SATA_FSL) += sata_fsl.o obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o obj-$(CONFIG_SATA_SIL24) += sata_sil24.o obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o -obj-$(CONFIG_AHCI_IMX) += ahci_imx.o +obj-$(CONFIG_AHCI_DA850) += ahci_da850.o libahci.o libahci_platform.o +obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o +obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o libahci.o libahci_platform.o +obj-$(CONFIG_AHCI_ST) += ahci_st.o libahci.o libahci_platform.o +obj-$(CONFIG_AHCI_XGENE) += ahci_xgene.o libahci.o libahci_platform.o # SFF w/ custom DMA obj-$(CONFIG_PDC_ADMA) += pdc_adma.o diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c index fd665d919df2..b51605ac5974 100644 --- a/drivers/ata/acard-ahci.c +++ b/drivers/ata/acard-ahci.c @@ -36,7 +36,6 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> -#include <linux/init.h> #include <linux/blkdev.h> #include <linux/delay.h> #include <linux/interrupt.h> diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index dc2756fb6f33..5a0bf8ed649b 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -35,7 +35,6 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> -#include <linux/init.h> #include <linux/blkdev.h> #include <linux/delay.h> #include <linux/interrupt.h> @@ -61,6 +60,7 @@ enum board_ids { /* board IDs by feature in alphabetical order */ board_ahci, board_ahci_ign_iferr, + board_ahci_noncq, board_ahci_nosntf, board_ahci_yes_fbs, @@ -121,6 +121,13 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, + [board_ahci_noncq] = { + AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ), + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, [board_ahci_nosntf] = { AHCI_HFLAGS (AHCI_HFLAG_NO_SNTF), .flags = AHCI_FLAG_COMMON, @@ -452,6 +459,12 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci }, /* ASM1061 */ { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1062 */ + /* + * Samsung SSDs found on some macbooks. NCQ times out. + * https://bugzilla.kernel.org/show_bug.cgi?id=60731 + */ + { PCI_VDEVICE(SAMSUNG, 0x1600), board_ahci_noncq }, + /* Enmotus */ { PCI_DEVICE(0x1c44, 0x8000), board_ahci }, @@ -564,6 +577,7 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { struct ata_port *ap = link->ap; + struct ahci_host_priv *hpriv = ap->host->private_data; bool online; int rc; @@ -574,7 +588,7 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context), deadline, &online, NULL); - ahci_start_engine(ap); + hpriv->start_engine(ap); DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); @@ -589,6 +603,7 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class, { struct ata_port *ap = link->ap; struct ahci_port_priv *pp = ap->private_data; + struct ahci_host_priv *hpriv = ap->host->private_data; u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; struct ata_taskfile tf; bool online; @@ -604,7 +619,7 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class, rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context), deadline, &online, NULL); - ahci_start_engine(ap); + hpriv->start_engine(ap); /* The pseudo configuration device on SIMG4726 attached to * ASUS P5W-DH Deluxe doesn't send signature FIS after @@ -1151,13 +1166,13 @@ static inline void ahci_gtf_filter_workaround(struct ata_host *host) static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports, struct ahci_host_priv *hpriv) { - int rc, nvec; + int nvec; if (hpriv->flags & AHCI_HFLAG_NO_MSI) goto intx; - rc = pci_msi_vec_count(pdev); - if (rc < 0) + nvec = pci_msi_vec_count(pdev); + if (nvec < 0) goto intx; /* @@ -1165,19 +1180,19 @@ static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports, * Message mode could be enforced. In this case assume that advantage * of multipe MSIs is negated and use single MSI mode instead. */ - if (rc < n_ports) + if (nvec < n_ports) goto single_msi; - nvec = rc; - rc = pci_enable_msi_block(pdev, nvec); - if (rc) + nvec = pci_enable_msi_range(pdev, nvec, nvec); + if (nvec == -ENOSPC) + goto single_msi; + else if (nvec < 0) goto intx; return nvec; single_msi: - rc = pci_enable_msi(pdev); - if (rc) + if (pci_enable_msi(pdev)) goto intx; return 1; diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index 2289efdf8203..51af275b3388 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -37,6 +37,8 @@ #include <linux/clk.h> #include <linux/libata.h> +#include <linux/phy/phy.h> +#include <linux/regulator/consumer.h> /* Enclosure Management Control */ #define EM_CTRL_MSG_TYPE 0x000f0000 @@ -51,6 +53,7 @@ enum { AHCI_MAX_PORTS = 32, + AHCI_MAX_CLKS = 3, AHCI_MAX_SG = 168, /* hardware max is 64K */ AHCI_DMA_BOUNDARY = 0xffffffff, AHCI_MAX_CMDS = 32, @@ -321,8 +324,17 @@ struct ahci_host_priv { u32 em_loc; /* enclosure management location */ u32 em_buf_sz; /* EM buffer size in byte */ u32 em_msg_type; /* EM message type */ - struct clk *clk; /* Only for platforms supporting clk */ + bool got_runtime_pm; /* Did we do pm_runtime_get? */ + struct clk *clks[AHCI_MAX_CLKS]; /* Optional */ + struct regulator *target_pwr; /* Optional */ + struct phy *phy; /* If platform uses phy */ void *plat_data; /* Other platform data */ + /* + * Optional ahci_start_engine override, if not set this gets set to the + * default ahci_start_engine during ahci_save_initial_config, this can + * be overridden anytime before the host is activated. + */ + void (*start_engine)(struct ata_port *ap); }; extern int ahci_ignore_sss; diff --git a/drivers/ata/ahci_da850.c b/drivers/ata/ahci_da850.c new file mode 100644 index 000000000000..2c83613ce2db --- /dev/null +++ b/drivers/ata/ahci_da850.c @@ -0,0 +1,114 @@ +/* + * DaVinci DA850 AHCI SATA platform driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pm.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/libata.h> +#include <linux/ahci_platform.h> +#include "ahci.h" + +/* SATA PHY Control Register offset from AHCI base */ +#define SATA_P0PHYCR_REG 0x178 + +#define SATA_PHY_MPY(x) ((x) << 0) +#define SATA_PHY_L |